This special fog fluid has been developed for optimal use with the leak detection machine Trotec FS200 and enables the effective visibility of leaks. According to EU criteria, this liquid is not classified as environmentally hazardous and does not pose a specific danger to humans. Furthermore, it is biologically well degradable. Please read the printed safety instructions carefully before use.   Data   Shape / Viscosity Liquid / thin liquid Color clear Odor neutral Melting point not known boiling point ab 100 °C Flash point not applicable Ignition temperature not applicable self-ignition  no Brand-enhancing properties  no Danger of explosion no density 1.08 - 1.10 g/cm Solubility in water (20 °C) any PH value about 6.5 Trotec article no. 3.510.010.025    

Learn more More Fewer

The floor fan TVM 20 D quickly provides plenty of cooling with its quiet operation and is also visually a great favorite. Due to its distinctive design, the device is also called a drum fan and its matte black look of the rotor cage and stand bracket reminds of countless professional appearances of wind machines of this type in front of and behind the cameras of large photo and film studios. Optimal for ventilation, wind generation, wind cooling, or drying - the TVM 20 D is versatile.   Made of metal and with attention to detail   "Made entirely of robust metal down to the last chrome-plated wing tip and equipped with a copper coil in the motor, the floor fan is designed for an exceptionally long lifespan. The device blows away even the hottest stagnant air from living or office spaces with a high air throughput and a blade diameter of 20 inches (about 50 cm). Additionally, with 120 watts, it has sufficient power reserves to provide adequate cooling even at escalating temperatures." With its three speed levels, the TVM 20 D is perfectly equipped for any ventilation scenario: At the control element on the back of the metal grid basket, a gently cooling airflow can be adjusted just as easily as a stiff breeze. The rotor basket can be tilted continuously 360° around its horizontal axis, ensuring that the airflow always reaches exactly where it is welcome.   Secure stance with a small footprint   As a professional, the floor fan TVM 20 D requires little space and is always a welcome sight – whether at a photo shoot, in a restaurant, or with the practical wall and ceiling mounting at a party or concert. The device also easily withstands the occasional bump – thanks to three non-slip rubber feet attached to the bottom of the stand, which ensure the fan's stable position. The carrying handle at the back also makes the fan particularly easy to handle for transport to different locations.   Here are some practical advantages at a glance: 120 watts of power 3 speed levels Adjustable tilt angle of the fan head up to 360° Front and rear protected metal grill Fan blade diameter 50 cm Stable and non-slip base for a tilt-resistant stand Long lifespan thanks to the copper coil in the motor Smooth running Practical carrying handle Unique value for money Optional available: Wall and ceiling mount for ventilating hard-to-reach areas. Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether living area, conservatory, or bathroom, as a supplementary heating solution, the infrared flat heater creates warmth directly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 450W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.43 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 2 A Power consumption max. 0.45 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 705 x 605 x 22 mm (without stand feet) Weight 4 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.010 Guarantee 2 years

Learn more More Fewer

Compact design, simple operation, and convincing features   This comfort dehumidifier is characterized by reliable operation, easy handling, and an affordable price. Thanks to its compact dimensions, it is handy and unobtrusive - it simply does its job in the background.   "It is equipped with a hygrostat-controlled dehumidification automatic system, allowing selection between target humidity levels of 40, 50, or 60%. Additionally, continuous operation is possible. It operates efficiently, and the operating noise for this dehumidification class is pleasant. With a capacity of up to 12 liters per day, it is capable of reliably keeping living and office spaces as well as basements up to an area of 25 m² dry."   The topic of safety is also well thought out: a light warns when the water container is full, and the overflow protection automatically shuts off the operation when the bucket is full. A viewing window also allows a look into the water tank, so the fill level can be checked at any time.     Dehumidification with comfort   Thanks to the direct hose connection, this dehumidifier can also be used in environments where regular manual emptying of the water tank is not always possible. For example, during unattended continuous drying operations in heated hobby rooms or holiday apartments.  The room air is cleaned of dust in the air intake area to prevent the interior of the device from becoming dirty. Additionally, a practical cable and plug holder, a stowable carrying handle, and steerable wheels provide easy transport when needed.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     air circulation   In this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. In a temperate environment, the device can dry about 1-2 loads of laundry per day.   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while using significantly less electricity.   "In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."       Propane (R290) as an environmentally friendly refrigerant in dehumidifiers "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection for 40, 50, or 60 % r.H.• Control panel with LED lighting• Memory function: after a power failure, the dryer resumes operation with unchanged settings -> connection to a timer possible• Continuous operation possible• Very compact and lightweight device in its performance class• Easily accessible air filter, easy to clean and reusable. Filters pet hair, lint, fluff, and dust.• Level warning light when bucket is full• Automatic shut-off when the bucket is full• Recirculation defrost automatic• Direct hose connection     Technical data   dehumidification performance at 30 °C / 80 % r.H. 12 liters / day air volume 118 m³/ h Maximum room size 25 m² (62 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C  moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.5 A Power consumption max. 350W Recommended Coverage 6 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (50g) GWP3 water bucket 2.1 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 215 x 320 x 420 mm Weight 11.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and cable holder and Display shows current room humidity, set air humidity, air quality memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

This nozzle is designed to allow the entire air volume of the incoming or outgoing air to circulate under the door.  The nozzle is pushed under the door and connected to air hoses on both sides of the door. To ensure that the entire volume of air can be transported under the door, the passage inside the nozzle is expanded to the maximum width, allowing the air to circulate well despite the low flow height. A protective mat (protector) protects the floor underneath from scratches.  In this way, the complete drying installation can be flexibly relocated to rooms that have minimal noise disturbance for the affected party. Furthermore, the drying time is reduced if the room can remain closed. The nozzle is designed as standard for connecting hoses with a 38 mm inner diameter. For the use of 50 mm hoses, a separate adapter ring is available, which can be easily slipped over the nozzle to increase the diameter.  Technical data  connection nozzle I 2 on both sides suitable hose diameter 38 mm Masse (B x H x T) 400 x 74 x 157 mm Weight 1.7 kg Trotec article no. 6.100.000.160 guarantee 2 years

Learn more More Fewer

This data logger enables precise monitoring of CO2 air quality in indoor environments such as offices, classrooms, or apartments. It features a generous data storage capacity that can hold up to 50,000 measurements, allowing for comprehensive long-term recording of carbon dioxide concentrations, air temperature, and humidity values. The measurement intervals are freely selectable and range from one second to twelve hours. An integrated CO2 traffic light visualizes changes in air quality at a glance. The recorded data can be conveniently transferred to a PC via a fast USB connection and analyzed and logged using the included analysis software. Thanks to the integrated Li-Ion battery, the CO2 data logger is suitable not only for stationary use on a table but also for mobile applications. Furthermore, the data logger offers property management companies and landlords the opportunity to optimally monitor and, if necessary, adjust ventilation behavior by simultaneously recording humidity, temperature, and CO2 concentrations.    Automatic Calibration (Automatic Baseline Calibration)   The currently expected CO2 fresh air value is around 400 ppm (0.04 %vol). This is assumed by the device as the lowest threshold (baseline). A special algorithm now continuously monitors the lowest measured CO2 value from the sensor over several days. This occurs over a preconfigured time interval and slowly corrects any detected long-term drift compared to the expected fresh air value of 400 ppm (or 0.04%vol) CO2.   In normal indoor applications, the carbon dioxide level eventually drops to nearly outdoor air levels over the course of a week. By recording the values over a period of 8 days and subsequently comparing the lowest value with the 400-ppm point, the measuring device determines whether it needs to adjust the zero point or not. This happens completely automatically. The algorithm thus takes advantage of the fact that the CO2 level in buildings/rooms regularly stabilizes at a minimum for a certain period when they are unoccupied. In rooms that are permanently occupied or where there is a constantly elevated CO2 concentration (e.g., greenhouses), this principle of automatic calibration does not work.     Advantages at a Glance   • Accurate and long-term stable NDIR measurement of carbon dioxide concentrations in indoor air• Simultaneous display of CO2 values, room temperature, humidity, date, and time• Minimum and maximum value function for CO2, air temperature, and air humidity• Carbon dioxide alarm function with audible warning for freely definable limit values• Additional symbolic CO2 indicator display comparable to a CO?-traffic light• Large backlit display with easily readable measurement display• Autonomous long-term logging of carbon dioxide concentration, room temperature, and humidity• Storage for 50,000 measurement values• Freely definable storage interval from 1 second to 12 hours• USB interface for measurement data transfer• For table setup and mobile use• PC analysis software     Scope of delivery• Measuring device• Battery(s)• Power supply• USB connection cable• PC Software (Download)• User manual     Technical data   CO2 measuring range 0 bis 9999 ppm accuracy ±75 ppm / ±5 % resolution 1 ppm Measurement range air temperature -5 °C to +50 °C resolution 0.1 °C accuracy ±1 °C Measuring range humidity 0.01 % r.F to 99.9 % r.F. resolution 0.1 % r.F. accuracy ±5 % r.F. Advertisement LCD Power supply 1 x 3.7 V Li-Ion battery or 230 V power supply Sampling + Storage Interval > 1 s interface USB Weight 245 g Masse (L x B x H) 90 x 110 x 98 mm Trotec article no. 3.510.205.015 Guarantee 2 years

Learn more More Fewer

The practical telescopic probe makes this precision anemometer from the MultiMeasure Professional series a versatile measuring instrument for determining flow, temperature, and volumetric flow rate. "For measurements in channels or at remote locations, the probe can be extended continuously up to one meter of usable length."The combination of a robust heat wire sensor and advanced microprocessor technology for signal processing ensures fast and precise measurement results for every requirement, which are clearly displayed on the illuminated dual display of the user-friendly LC display, even in poorly lit environments.  application examples   • Examination of heating systems, ventilation ducts, or air conditioning units • Adjustment of the Lutt current when using multiple devices • Commissioning• Maintenance tasks• Measurement of air velocity and temperature at air ducts and ventilation slots• Certification of critical environments• Channel measurement• Leak tests on windows or doors    Advantages at a glance • Measurement of air velocity (in m/s, mph, km/h, kn, ft/min) and air volume flow (m³/min, ft³/min)• Slim telescope probe - infinitely extendable up to 1 m in length - allows measurement even in hard-to-reach places.• Large, easy-to-read LCD with backlight and dual measurement display• Pointwise and temporal averaging• Minimum, Maximum, and Hold Function• Delivery including calibration certificate     Optional   First, read the data stored in the device, such as images, Excel spreadsheets, or graphics using the software included in the delivery. Now transfer the results by copying and pasting into one of the pre-made report templates of the MultiMeasure Studio PRO software (download MultiMeasure Studio STD), which allows you to easily and quickly create professional measurement reports in this way. The text modules already included (currently only available in the German version) and sample reports are fully editable and can also be compiled into new templates defined by the user at any time.     scope of delivery   • measuring device • evaluation software • operating instructions   Technical data   air flow measurement Measuring range accuracy resolution Messprinzip   measuring air volume Measuring range   Measurement of air temperature Measuring range  accuracy resolution   0.1 bis 25 m/s ± 5% of the measurement value + 1 measurement unit 0.01 m/s hot wire     0.001 - 999,000 m³/min or ft³/min     0 °C to +50 °C ± 1 °C 0.1 °C   Display LCD interfaces USB energy supply 9V Block Battery Ambient temperature 0 °C to +50 °C Masse L x B x H 210 x 75 x 50 mm Weight 280 g tripod thread yes, 1/4 inch Automatic shutdown system and Trotec article no. 3.510.205.042 guarantee 2 years  

Learn more More Fewer

Proven UV dye for pipe break detection, available in various colors. This dispersion is water-dilutable. In the visible wavelength range, it leaves virtually no detectable traces, whereas when exposed to UV light, it glows intensely.  The product is particularly well suited for leak tests on water-bearing surfaces of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent substance can be detected and made visible under UV light.  Further applications can be found in non-destructive testing (NDT) as well as in leak detection, when capillarity is of secondary importance and no visible traces of the UV tracer should remain.  "So that users can have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, it is now also available in red, blue, and purple."  Important: Luminat is not suitable as a food coloring.  scope of delivery 1 bottle with 1 liter of blue dye  Advantages at a Glance • Proven UV tracer for pipe break detection • No metabolism – optimal for long-term studies • Very intense color luminescence under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100 % formaldehyde-free fluorescent dye, made in Germany• Available in various colors – for every environmental condition and preference

Learn more More Fewer

Good heating performance with small space requirements Compact in form and size, this matte black infrared heater is designed for quick heating of balconies, terraces, trade fair and market stands, outdoor events, seating and standing areas in outdoor gastronomy, as well as comparable areas with minimal space requirements. Whether in the cold winter, in spring with still cool temperatures, or on unexpectedly chilly summer nights – this heater with digital display and remote control enriches outdoor areas year-round with pleasantly summery temperatures, without taking up much space.  Easy handling The lightweight heater impresses with its easy operation while providing maximum functionality and heat intensity. It floods areas of 8 - 14 m² with targeted instant heat, either at the push of a button on the device itself or via remote control. In contrast to conventional halogen heating tubes, the high-quality carbon infrared tube emits 80 percent less red light, but significantly more pleasant infrared heat. The expected lifespan of this tube is approximately 10,000 operating hours.  Usable as a wall or ceiling heater As a wall and ceiling heater, the heater warms seating groups, standing tables, and outdoor lounge areas with odorless heat without preheating time. For the uncomplicated installation of the carbon heater, a 45° swiveling bracket along with screws and dowels is included in the delivery. With the approximately 1.80 m long cable, nearby sockets can be reached.  pleasant warmth The pleasant infrared heat of the infrared heater is immediately noticeable on the skin after switching it on. To adjust the heat intensity as needed, the device has four heating levels with 800 watts, 1200 watts, 1600 watts, and 2000 watts of heating power, selectable via the integrated control panel or the included remote control.  Planned Heat Outdoors "For energy-saving programming of a specified operating duration, the heater is equipped with a practical 24-hour timer. Once set, the heater automatically switches off after a predetermined number of hours (1-24 hours). This reduces unnecessary operating costs and simplifies usage, especially in commercial applications."  Safe and Weatherproof For maximum safety, the infrared heater is equipped with a self-resetting overheating protection. If the maximum permissible operating temperature of the heater is exceeded, a safety thermostat automatically shuts down the operation. Another advantage – especially for professional use in gastronomy – is the design aluminum housing constructed according to protection class IP55, which allows the splash-proof infrared heater to reliably withstand wind and rain.  Infrared heat: As pleasant as the sun The heater warms its immediate surroundings according to the natural principle of the sun. Unlike devices with heating wires, the infrared rays do not warm the surrounding air, but exclusively the surfaces and people they encounter. The irradiated objects (for example, furniture, walls, and ceilings) absorb the heat and store it, gradually releasing it again. The objects thus serve as an additional energy and heat storage – even when the device is turned off, which further increases efficiency. The heat radiation creates a pleasant feeling of warm sunlight on the skin in summer. "Every person perceives temperatures differently. Our individual heat perception is influenced, for example, by the distance to the heat source. The smaller the distance to the heater, the smaller the irradiated area – the greater the distance to the heater, the larger the irradiated area. The 2000 watt strong carbon tube is recommended for areas in outdoor spaces of about 8 m² in cold or 14 m² in slightly tempered environments."   No disturbing emissions The clean and condensation-free instant heat is generated, unlike electric heaters, without dust swirling, disturbing noises, and unpleasant odors.  Low Glare: 100% heat, 80% less light Conventional infrared heaters without Low Glare technology often emit an intense orange-red light along with the heat radiation, which many people perceive as warm and cozy. However, to ensure that the surroundings are not overly illuminated or disturbed, the IR 2005 from Trotec features a carbon infrared tube with light-reducing Low Glare technology. Advantages of Low Glare Technology Romantic candlelight atmosphere: Low glare shortwave heaters produce a larger share of infrared light from the invisible light spectrum – and that with unchanged heating performance. Furthermore, the infrared radiation is bundled through an innovative coating process of the tubes, which reduces scattering losses. Overall, Trotec carbon infrared heaters with low glare technology achieve a brightness reduction of up to 80% with an expected lifespan of approximately 10,000 hours.  Full heat output at lower brightness: "As the perceivable light is significantly reduced, the immediate surroundings of the heater create the impression of a cozy candlelight atmosphere, and the ambiance is noticeably more pleasant. An already existing lighting concept on the terrace or in the gastronomy is overall less affected." Note: Low Glare carbon heating tubes appear just as intensely reddish when viewed as conventional infrared heaters without Low Glare. In fact, they emit 80% less visible light. With the same heat output – for more comfort and romance.  Advantages at a Glance Infrared heat without preheating• Four heating levels, up to 2000 watts heating power• High-quality carbon infrared tube – approx. 10,000 hours of light with 80% light reduction• Uniform and targeted heat distribution• Clean, condensation-free, odorless, and completely silent• No dust swirling, therefore suitable for allergy sufferers• Protection class IP55 – spray water protected professional device• 24-hour timer for fully automatic shutdown• LED display• Robust aluminum housing• Adjustable 45° tilt angle – with a large effective area• Suitable for wall and ceiling mounting• Infrared remote control• Integrated hanging device• Energy efficient     Technical data  heating capacity 2000W heating levels 800 / 1200 / 1600 / 2000W Heizart Infrared heat waves heating tube Carbon, Low Glare effective area max. 14 m² Voltage 220 - 240 V/50 Hz rated current consumption max. 8.6 A Power consumption max. 2000W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 900 x 175 x 105 mm Weight 3 kg Protection class IP55 on/off switch and Overheating protection and Display no Frost Watch Function no parental controls no Timer and, 1-24 Hours. Housing Aluminum remote control and Tripod optionally available Trotec article no. 1.410.003.208 guarantee 2 years

Learn more More Fewer

These infrared panels are ideal for equipping previously unheated rooms with an effective heating source or for generating localized warmth, such as at the workplace, by the sofa, or in the bathroom. The gentle heat waves are absorbed by solid materials like furniture or walls, as well as by people, providing a pleasant warmth. It is very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. "While traditional heating devices need to heat the entire room volume, heating plates can specifically heat desired areas. This saves a lot of energy and thus also costs."  application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for spot heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.  Advantages at a Glance • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell• no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (matching stand feet are available from us as accessories)• Immediately usable - no additional installations or expensive renovations required You can find the ErP table for this heating device above in the "Documents" section.      Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of the room in m² x W/m² = required heating power in Watts.  Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   heating capacity 580W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 Voltage 220 - 240 V/50 Hz rated current consumption max. 2.6 A Power consumption max. 0.58 kW housing Aluminum Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without stand feet) Weight 5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.012 guarantee 2 years

Learn more More Fewer

Comfort, design, and high air performance   This dehumidifier impresses with its elegant design and thoughtful functionality. Its diverse features include a total of four operating modes. Here, the dehumidifier offers a hygrostat-controlled dehumidification automatic with a target value selection between 35 and 85% relative humidity in comfortable 5% increments, including an optional turbo fan.   A popular alternative to the dehumidification automatic function is the comfort function, where the humidity level is automatically adjusted to a comfortable value depending on the temperature. Additional operating modes include a laundry drying function and a permanent function.     Comfort function: Temperature-dependent air dehumidification   To achieve an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended when using programmable heating systems. If the room temperature changes during the day or at night, the dehumidifier automatically adjusts its dehumidification performance. This protects against mold formation and saves electricity.      Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Practical Functions   When drying residential and office spaces of up to around 40 m², this dryer is an absolutely reliable partner. Various details simplify operation, such as the viewing window on the tank, which makes the fill level easily recognizable, the practical timer function, the fill level warning light when the water container is full, and the overflow protection with automatic shut-off. The air filter is easy to remove and wash. When the tank is full, a float automatically interrupts operation.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with unchanged settings after a power interruption as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be used to significantly accelerate the drying of laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.     Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection between 35 and 85 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor (i.e., the dehumidification) automatically pauses. The fan continues to run to determine the actual humidity in the room. If it exceeds the limit, the device automatically switches back on.• Comfort operation for temperature-dependent automatic control of humidity for optimal room climate at all times• Continuous operation• Auto-restart function for use with an external timer• Display of relative humidity• Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Laundry drying function• Timer Function• Recirculation defrost automatic• Connection for external condensate drainage• 3 fan speeds• Level warning light when water tank is full• Automatic shutdown when tank is full thanks to float   Technical data  dehumidification performance at 30 °C / 80 % r.H. 16 liters / day air volume 150 m³/ h Maximum room size 40 m² (100 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.2 A Power consumption max. 430W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (75g) GWP3 water bucket 3 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 350 x 510 mm Weight 15 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 3-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Modern insulation layer dryers are indeed optimally soundproofed, but due to their function, they produce turbine-like noises that are often perceived as disturbing by residents. This silencer can be easily integrated into the drying system and significantly reduces operational noise. "Extensive practical tests have shown significant sound reductions when using insulation layer drying units from leading manufacturers. This universally applicable module is particularly suitable for use with Trotec insulation layer drying units and offers even more sound reduction without back pressure."  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  Advantages at a Glance • Sound reduction between 14 and 19 dB(A) possible• No loss of performance and no back pressure• Compatible with many common insulation layer drying units• Universally applicable for 38 mm and 50 mm hoses• For compressor operation in underpressure and overpressure processes• Specifically designed for flexible and stable stack installation "in one piece" with MultiQube system components.• 100% recyclebar  Technical data  sound reduction 14 - 19 dB(A) air hose connections  2 nozzles of 38 mm each (optional rubber adapter available in 50 mm) Masse (L x B x H) 378 x 378 x 132 mm Weight 3.4 kg Trotec article no. 6.100.000.120 guarantee 2 years

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.460

Learn more More Fewer

What medicine refers to as a "minimally invasive procedure" can also be effectively and purposefully carried out in everyday life: the "examination" using an endoscope. For this, the small camera of the videoscope is inserted into the interior of hard-to-reach cavities, and the filmed content is displayed live and in color on the 3-inch LCD screen.  With this method, it is easy to search for possible damage in technical areas, cable ducts, pipes, or motors, or to carry out regular maintenance inspections – even in operations where the probe is underwater. The advantage is clear: Technical devices do not need to be laboriously disassembled, drywall does not need to be broken open, water circulation systems do not need to be emptied, and cable and pipe ducts do not need to be exposed. Even in the case of pest infestations, this small camera can quickly check where insects and rodents find their shelter.  For professional and private use  Ideal for caretakers, technicians, or home users – when it comes to a reliable and fast endoscopic visual inspection. Whether for indirect optical inspection of concealed machine parts or for insights into cavities accessible only through small openings – the narrow and semi-flexible gooseneck probe with mini-camera has a diameter of only 5.5 mm and is therefore optimal for quick auto inspections or an insightful look into inaccessible tight spots such as gaps, drains, pipelines, or cable conduits. The flexible 95 cm long gooseneck probe can be inserted into small openings, and the four-stage dimmable light from 6 LEDs illuminates the surroundings ideally for high-quality inspection images – even underwater. The LC color display provides razor-sharp photos and videos with a high resolution of 1280 x 720 pixels, and a 3x zoom is available for viewing enlargement. The practical image rotation function of 180° simplifies the display in case the image is shown upside down due to the probe's position.  Suitable for all applications with 3 different attachments. If needed, the tip of the gooseneck probe can also be equipped with a 45° mirror, hook, or magnet attachment, thus expanding its functionality. The included 45° mirror attachment allows for a "view around the corner" or a more precise examination of the object from different perspectives. With the magnet or hook attachment, you can clear or retrieve objects. Thanks to the wireless operation, the device is extremely flexible and user-friendly. For accurate time documentation, the display is equipped with a date and time display. You will receive a complete set including all necessary utensils for immediate use in a practical transport bag. Please note: To store photos and videos, you will additionally need a micro SD card with up to 32 GB of storage.  Compact and fully equipped all-rounder 45° mirror attachment"To be able to conduct a thorough inspection from all sides and different perspectives, a 45° mirror attachment is included in the complete set. This even allows for a view around the corner." Hakenaufsatz"If you have located and identified the missing item or a foreign object using the probe, you can easily retrieve or remove it with the hook attachment. In this way, many a piece of jewelry thought to be lost has come back to light." magnetic attachment"Without the strenuous moving of furniture, screws, nuts, coins, and other iron, nickel, or cobalt-containing metal parts can be easily found or removed from under heavy cabinets and seating sets, or earrings and rings can be quickly and safely located in the drain. Recovery is conveniently done using the practical magnetic attachment on the camera." "Brightness control brings light into the dark""Of course, there are no daylight conditions in cavities, cable ducts, and covered areas. To have a perfect view here as well, the camera is equipped with its own light sources that adequately illuminate the respective environment and provide brilliant photo views. It is equipped with a camera light and a device light." Camera light on the probe headThe camera light, adjustable in 4 brightness levels, provides perfectly illuminated inspection photos and videos with 6 integrated LEDs. device lightOn the back of the handset, there is a device light that can illuminate objects for better viewing. Alternatively, this light source can also be used as a flashlight. Photo and video functionsBrilliant image and photo reproduction with a max. camera resolution of 1280 x 720 pixels. For detailed viewing, you can "freeze" a sequence of images during the ongoing video transmission and examine it more closely as a still image. With the 3x zoom, image sections can be enlarged 1.0x, 1.5x, and 2.0x. If a micro SD card is inserted into the device, all recordings can be saved as photos or videos. Thanks to the practical flip function, the image can be rotated 180°, allowing you to achieve a perfect view in almost any working position.  For universal applications Find faster instead of searching for a long timeWith the .Videoscope, you can conveniently inspect otherwise unreachable areas. This also allows you to quickly find accidentally dropped small parts like screws in the engine compartment or in hard-to-reach machine components, and effortlessly fish them out with the help of the easily attachable hook or magnet attachment. Waterproof immersionAt the tip of the swan neck probe, there is a color image camera head installed that is dust and waterproof according to protection class IP67, with adjustable lighting. Therefore, you can also immerse the probe in water and quickly check whether, for example, unwanted objects are blocking the terrace drain. Check machine condition"Compact machines or devices with a fixed housing cannot be easily opened. To get a glimpse inside the device, simply insert the 5.5 mm narrow gooseneck probe into a suitable opening and gain a comfortable all-around view in the inspection area via the display." The quick car inspection"Even without completely disassembling the engine block, you want to know where the leak is from which water is dripping onto the floor, which cable the marten has torn out, or where there is an obvious line defect. Simply turn on the device, insert the probe, and check the position via the display." Finding unwanted roommatesInsects or mice like to inhabit the literally farthest corners of the attic or basement. Other pests like ants also like to spread out harmfully in wall cavities. Now you can comfortably search for the pests and their nests or droppings without having to carry out extensive demolition work or even remove wall, ceiling, or floor coverings.  Advantages at a Glance • 3 inch digital LCD color display• 95 cm long, semi-flexible and bendable gooseneck probe (Ø 5.5 mm)• Waterproof according to protection class IP67 (gooseneck probe and camera head) for underwater use• Including 3-piece accessory set with 45° mirror, hook, and magnet attachment• Still image, photo, and video mode• High-quality camera with a resolution of 1280 x 720 px• Taking photos and videos - can also be stored with an inserted micro SD card of up to 32 GB• 6-fold LED light on the camera head with 4 brightness levels• LED light in housing (flashlight function)• Compact probe unwinding• Flip function for 180° image rotation• 3x zoom• Depth of field 1 cm to 30 cm, field of view 65°• Date and time display• Robust construction• Wireless battery operation for mobile, independent use• Battery status display• Including 4 x Alkaline LR6 AA batteries, 1.5 V• Protective transport bag• Simple intuitive operation  scope of delivery  • measuring device• mirror adapter• Magnetadapter• Hakenadapter• Batteries• Carrying case• User manual     Technical data   Display Color display, 3 inch LCD (640 x 480 pixels) memory SD card 32 GB max. (optional) file formats JPG (Photo) + AVI (Video) Dimensions H x W x D 162 x 85 x 35 mm Weight 385g Protection class IP67 Power supply 4 x AA batteries (included) Ambient temperature -10 °C to +60°C Trotec article no. 3.510.009.122 guarantee 2 years

Learn more More Fewer

Good, affordable household dehumidifier This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower outlet. The hose must be laid with a downward slope, as no pump is included in the device. The hose connection is particularly well designed in this model: if the hose is not permeable or is incorrectly laid (kinked, insufficient slope, etc.), the water is automatically redirected into the bucket, which automatically shuts off the device when full. In other models, backed-up water can lead to leakage from the bottom, which is prevented in this model.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 1-2 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off  Technical data  dehumidification performance at 30 °C / 80 % r.H. 20 liters / day air volume 150 m³/ h Maximum room size 50 m² (125 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 1.8 A Power consumption max. 420W Recommended Coverage 10 A Cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (86g) GWP3 water bucket 3 Liter operating noise 43 dB(A) at 1 m distance 40 dB(A) at a distance of 2.5 m Dimensions L x W x H 253 x 340 x 570 mm Weight 12.5 kg defrosting automatic Electronic, Recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter guarantee 2 years       Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

"This heater is suitable for quickly warming seating areas on terraces, in lounges, sports halls, or conservatories, so that the cozy gathering does not come to an abrupt end due to the cold. Thanks to its slim, attractive design, this heater is not only a source of warmth but also integrates decoratively into the room design."     Usable as wall and ceiling heating radiators   A supplied bracket allows for horizontal or vertical mounting of the heater on the wall or ceiling. The 45° swivel joint enables precise alignment of the heat rays to seating or table areas. Additionally, an easy-to-install cable system with quick screw connection is included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself can be done easily with minimal DIY skills.     Feel-good atmosphere at the push of a button   The pleasant infrared heat is immediately noticeable on the skin after switching on. To adjust the heat intensity, the heater has two heating levels of 1100 watts or 2200 watts, which can be set directly on the device or via the included remote control. When mounted on the ceiling, the height is also crucial for how much the space below is heated and how wide the heat rays spread. The lower the height, the warmer and smaller the illuminated area becomes. In lounges, a height of about 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment according to the natural principle of the sun. Unlike devices with heating wires, infrared rays do not warm the surrounding air, but exclusively the surfaces and people they encounter. The irradiated objects (such as furniture, walls, and ceilings) absorb the heat and store it, gradually releasing it back. The objects thus serve as an additional energy and heat storage – even when the device is turned off, which further increases efficiency. The heat radiation creates a pleasant feeling of warm sunlight on the skin in summer.   The high heating level (2200 watts) covers an area of approximately 9 m² in outdoor areas (in cool surroundings) or a maximum of 15 m² in slightly tempered, wind-protected environments.    "In particular, allergy sufferers and people with sensitive airways will find the benefits of infrared heaters to be soothing. The clean and condensation-free instant heat is generated, unlike electric heaters, without dust swirling, disturbing noises, and unpleasant odors."     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-red light, which many people perceive as warm and cozy, but sometimes also as glaring. To prevent the surroundings from being too brightly lit, this heater is equipped with two shortwave infrared tubes featuring light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwave heaters produce a larger proportion of infrared light from the invisible light spectrum. The infrared radiation is bundled through an innovative coating process of the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology, with a lifespan of approximately 6000 hours.   Full heat output at lower brightness: "As the perceivable light is significantly reduced, the immediate surroundings of the heater create the impression of a cozy candlelight atmosphere, and the ambiance is noticeably more pleasant. An already existing lighting concept on the terrace or in the gastronomy is overall less affected."     Advantages at a Glance   • Instant heat without preheating• Uniform and targeted heat distribution• Clean, condensate-free, odorless and noiseless• No dust swirling, therefore suitable for allergy sufferers• 2 heating levels 1100W / 2200 Watts• Remote control• Elegant Design• Weather-resistant aluminum-plastic housing• High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light• Adjustable 45° tilt angle – with a large effective area• Usable in the covered outdoor area• LED display• Operating control light• Suitable for wall and ceiling mounting• Energy efficient     Information video on infrared heaters   Technical data  heating capacity max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W Heizart Shortwave infrared heat waves, low glare tubes effective area 9 - 15 m² Voltage 220 - 240 V/50 Hz rated current consumption max. 9.5 A Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg Protection class IP66 (dust-tight and protected against powerful water jets) Min. distance to flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED-Display and parental controls no Timer no Trotec article number: 1.410.003.215 guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether at the workplace, in the living area, or in the bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides warmth directly where it is needed by the residents as a supplementary heating solution. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 700W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.72 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.2 A Power consumption max. 0.70 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without stand feet) Weight 6 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.014 Guarantee 2 years

Learn more More Fewer

Proven UV dye for pipe break detection, available in various colors. This dispersion is water-dilutable. In the visible wavelength range, it leaves virtually no detectable traces, whereas when exposed to UV light, it glows intensely.  The product is particularly well suited for leak tests on water-bearing surfaces of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent substance can be detected and made visible under UV light.  Further applications can be found in non-destructive testing (NDT) as well as in leak detection, when capillarity is of secondary importance and no visible traces of the UV tracer should remain.  In order for users to have the optimal UV fluorescent dye for every task, the product is now available in four bright colors: Green, Red, Blue, and Purple.  Important: Luminat is not suitable as a food coloring.  scope of delivery 1 bottle with 1 liter of green dye Advantages at a Glance • Proven UV tracer for pipe break detection • No metabolism – optimal for long-term studies • Very intense color luminescence under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100 % formaldehyde-free fluorescent dye, made in Germany• Available in various colors – for every environmental condition and preference

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer