Small convection heater with fan This mobile flat radiator brings energy-efficient heat and contemporary design to rooms and workspaces that are rarely used or not connected to the central heating system. The visually appealing convector impresses with a modern product design, clear shapes, and easy operation. Turn it on, set the temperature, and immediately enjoy pleasant convection heat. An intelligent heat automation system automatically regulates the room temperature and optimally reduces electricity consumption.  Intelligent Thermostat Control A two-stage heating element with selectable heating power of 1000 or 2000W enables the rapid heating of rooms up to a size of 24 m² or 60 m³ – for example, as an additional heater in living or bedrooms, or as a quick heater for warming hobby rooms and basements, or even as an emergency heater in case a central heating system should fail. As practical as it is energy-saving, the integrated thermostat control automatically regulates the indoor temperature to the desired target value. The desired temperature level is conveniently and continuously set via a side-mounted rotary thermostat. Intelligent temperature sensors continuously monitor the room temperature and adjust the heating output according to the desired temperature. Once the target temperature is reached, the electric heating element switches off until additional heating of the room is required. This saves electricity costs and makes the use of the heating device more economical.  Quickly to pleasant comfort temperatures On cold days, you want to get warm as quickly as possible. Therefore, the convector is equipped with a switchable turbo fan in both heating levels for accelerated air circulation and warm air distribution.  Cozy warm room temperatures thanks to convection This device operates with the effect of uniform convection heat. The room air is heated by electrically heated wires and consequently rises as warm air. This creates a natural draft that draws cold room air into the device. In this way, a constant circulation of warm air is generated throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus optimally preventing overheating or underheating of individual areas. Once the preset temperature is reached, the device switches off and only turns back on when additional heating of the room is necessary to reach the target value again. The result is a room-filling comfortable warmth – which is 100% clean, condensation-free, and odorless due to the electric heating element.  Clean comfortable warmth for • Living spaces• Bedroom• Home office study• Winter gardens• Hobby rooms• Holiday homes• Workshops• Garages• Basement rooms There are good reasons for and against the use of a convector with a turbo fan. If a room needs to be heated in the shortest time possible, the high fan setting is recommended so that the heat spreads throughout the room as quickly as possible. Operation without the ventilation switched on is silent, while with the ventilation switched on, the noise of the fan is perceptible depending on the setting, either quietly or somewhat louder. In quiet bedrooms, the pure convection heat without the ventilation switched on is more pleasant.  Advantages for Practice • Up to 2000 W heating power for clean, condensation-free, and odorless warmth• 2 heating levels (1000 W / 2000 W)• Turbo blower for faster air circulation• Stepless temperature control• Thermostat-controlled automatic operation• Frost Guardian Function• Energy-efficient operation thanks to automatic shutdown upon reaching target values• Maximum safety thanks to overheating and tilt protection• Silent heating (when the fan is not in operation)• Stable stand due to large feet• Integrated grip recess for easy transport  Frost Guardian Function  Ideal for short-term property vacancies or spaces that are not constantly used. With the stepless thermostat control of our mobile TCH convectors, you can also use the devices in frost protection mode. The heating device is then automatically activated via the thermostat to keep the rooms frost-free or to prevent excessive cooling. As frost protection devices, the TCH convectors are not only ideally suited for landlords or real estate companies – they also provide a practical function for private individuals or businesses to keep vacant spaces or garages frost-free. In particular, rooms, conservatories, or basements that are not connected to central heating can be reliably kept warm in this way.  Please note • The ERP table for this heating device can be found in the "Documents" section.• The device is only suitable for use in well-insulated rooms or for occasional use.   Technical data  heating capacity 1000 / 2000W Heizart Convention and Fan Maximum room size 24 m² (60 m³) temperature range 0 - 40 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 8 A Power consumption max. 2000W Recommended Coverage 10 A Cable length approx. 1.7 m Plug EU plug with Swiss adapter Dimensions W x H x D 530 x 378 x 172 mm (including stand feet) Weight 3 kg Protection class IPX0 on/off switch yes, step switch OFF - 1000W - 2000W thermostat control and LC-Display no Frost Watch Function and Automatic shutdown at target value and parental controls no Timer no, operation on timer possible anti-tip device and Operating noise without fan Operating noise with fan noiselessly max. 50 dB(A) at 1m distance, 47 dB(A) at 2.5m distance guarantee 2 years  

Learn more More Fewer

The "B2-PTC" is a very effective heater for rooms, cars, and caravans.The ceramic heating element provides an incredibly good efficiency of input energy to generated heat. It is therefore ideal wherever only standard household sockets are available, but maximum heating power is required.It is also noticeable that the heating phase is much faster, as the heater reaches operating temperature within a few seconds. It heats the air by a whopping 65°C (difference between intake air temperature and exhaust air temperature), which is almost double the difference compared to conventional construction heaters. Therefore, this heater should not be placed within reach of children.The heating power can be selected in two stages: 1000W or 2000W. The target temperature is determined via a stepless thermostat controller.Normal current 230/V, min. 10 Amperes, Swiss plug with connection cable.Product advantages• Room thermostat included• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Quiet running• Motor with thermal protection• Overheating thermostat• Built-in thermostat• Automatic Reset   Technical data  Dimensions (W x H x D)  200x200x200 mm Weight 2.5 kg Housing color Metal yellow powder-coated Protection class IP21 Selectable heating power 1000 / 2000W insurance 8.7 A Motorspannung 230 V Motorstrom 0.2 A airflow 97 m³ / h temperature range 0 - 40 °C guarantee 2 years

Learn more More Fewer

TDS 10 electric heater – compact heat with 2 kW Efficient, condensation-free heat for small rooms, basements, and construction containers – compact, flexible to set up, and easy to operate. The TROTEC TDS 10 electric heater combines a space-saving design with reliable heating performance. With up to 2 kW, it is suitable for rooms up to approximately 25 m² or 60 m³ and is a practical solution for smaller basements, storage areas, garages, and construction containers. The desired temperature can be easily regulated via the continuously adjustable thermostat. The fan ensures a continuous airflow, while the heating elements switch on and off automatically as needed. In addition to two heating stages, a fan-only mode is also available. The unit generates condensation-free heat without consuming oxygen, making it also suitable for indoor spaces. Overheating protection, a thermally protected blower motor, and tip-over protection provide additional safety. Thanks to the auto-restart feature, the heater resumes operation with the previously used settings after a power interruption. For flexible placement, the TDS 10 is equipped with side mounting threads for optional wall or ceiling installation. Suitable brackets are available as accessories. Recessed controls, a robust metal housing, and the compact format make it a versatile heater for everyday use and professional applications. The intake room air is heated inside the unit and then blown out. Since a large volume of air is moved, the exiting airflow does not necessarily feel very hot. Instead, the room heats up gradually and evenly. Features: Maximum heating capacity of 2 kW Two heating stages plus fan mode Continuously adjustable thermostat Auto-restart function Overheating protection Tip-over protection Blower motor with thermal protection IP24 protection rating Condensation-free heat without oxygen consumption Prepared for wall or ceiling mounting Recessed controls Compact metal housing Precise temperature control With the integrated, continuously adjustable thermostat, the desired room temperature can be conveniently set. The heating elements switch on automatically when heat is required and switch off again once the set temperature is reached. The fan ensures a consistent flow of warm air during operation. Additionally, two heating stages of 1 kW and 2 kW, as well as a fan-only function, are available. This allows operation to be adapted to the specific heat requirement. Integrated safety functions Overheating protection and a thermally protected blower motor contribute to safe operation. Tip-over protection completes the features. The IP24 protection rating provides protection against the ingress of foreign objects and splash water according to the specified class. For setup and operation, always observe the safety instructions in the manual. Flexible setup and mounting Thanks to its compact dimensions, the TDS 10 can be placed flexibly on the floor. Side mounting threads also allow for wall or ceiling mounting with an optionally available bracket. Recessed controls complement the practical, robust design. Versatile applications The electric heater is suitable for smaller areas that require targeted heating. Typical locations include construction containers, garages, catering businesses, greenhouses, market stalls, storage and work halls, boat sheds, workshops, and shipbuilding areas. Advantages at a glance • Compact electric heater with 2 kW heating capacity• Two heating stages: 1 kW and 2 kW• Fan mode without heating function• Continuously adjustable thermostat• Automatic temperature control• Auto-restart after power interruption• Overheating protection and thermally protected blower motor• Tip-over protection• IP24 protection rating• Condensation-free heat without oxygen consumption• Wall or ceiling mounting with optional bracket• Robust metal housing with recessed controls Technical data Model TROTEC TDS 10 Item number 1410000012 Maximum heating capacity 2,000 W / 2 kW Heating stage 1 1,000 W / 1 kW Heating stage 2 2,000 W / 2 kW Fan mode Yes, without heating function Air volume 186 m³/h Recommended room size Up to 25 m² / 60 m³ Temperature range -15 °C to +25 °C ambient temperature Maximum temperature rise Up to 95 °C according to manufacturer specifications Thermostat Integrated, continuously adjustable Blower Axial fan, 1 blower stage Mains connection 230 V / 50 Hz, 1/N/PE Power consumption 2,000 W Nominal current 8.7 A Recommended mains fuse 16 A Plug type EU plug with adapter for Switzerland Protection rating IP24 Operating noise 46 dB(A) at 1 m distance Connection cable 1.35 m Housing material Metal Heating element Stainless steel heating element Functions Auto-restart, tip-over protection, thermostat, overheating protection Dimensions without packaging (L × W × H) 210 × 195 × 310 mm Dimensions with packaging (L × W × H) 240 × 260 × 360 mm Weight without packaging 3.5 kg Weight including packaging 4 kg Minimum distance to walls and objects Top, back, sides, and front at least 50 cm each Mounting Floor placement or wall/ceiling mounting with optional bracket Note: Observe the required minimum distances and follow the operating manual and all safety and warning instructions from the manufacturer.

Learn more More Fewer

A handy electric heater with very good heat efficiency thanks to the ceramic heating element. This allows the heater to reach the desired heating output with a short warm-up time. At the high heating level of 2000 W, the blown air is heated to more than 60 °C above room temperature. The temperature controller has a wide range starting from 0 °C. The BGP can thus also be used as a frost guard when the room temperature needs to be kept just above freezing.The ventilation is rather mild at about 120 m³/h compared to other electric heaters in this category; however, the BGP is hardly audible in terms of operating noise thanks to the quiet radial fan. This model is therefore suitable not only for use in construction and industry but also for heating quiet areas such as waiting rooms, living rooms, or simply for keeping your feet warm under the office desk. The housing is made of a black, fireproof plastic and a metal rack with a practical carrying handle. The fan head can be rotated vertically in a large radius up to 90°, allowing the warm air to be directed precisely to the desired location. With the help of two standard hooks, the device can even be hung on a wall (hooks not included in the delivery).The heater has two rotary controls at the top of the housing:• left step controller: only ventilation / 1200 W / 2000 W• right: stepless thermostat for regulating the desired temperatureAdditionally, there is an operating light located between the two controls that indicates when the heating operation is running."If the temperature is correct, the heating pauses (the ventilation also stops). If the temperature falls below the set value, the operation starts automatically."The adjustable range of the temperature controller is from 0° to 85°C, with an overheating protection that interrupts the heating operation at a room temperature of just over 40°C.Due to the high exhaust temperature, the device should not be placed within reach of children or pets, although the solid front grill of this model poses significantly less risk of burns than similar fan heaters, which only have a metal grid for air exhaust. How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 220V-240V / 50HzHeating levels: 2 levels 1200 W / 2000 W + pure fan level: 25 WMinimum protection: 9.1 ARoom thermostat: continuously adjustable 0 - 85 °CAir volume flow: only one fan stage  our measurement: 120 m³/h(Manufacturer's specification: 170 m³/h)Protection class: IP20operating noise(our measurement): 1 m distance: 39 dB(A)2.5m distance : 36 dB(A)Dimensions: Height with handle: 32 cmWidth: 30 cmDepth: 25 cmWeight: 3.1 KgOperating mode: rotary knobApplication area: up to max. 25 m²Swiss plug: Yes + 1.30 m connection cableWarranty: 2 years   

Learn more More Fewer

Kompakter Keramik-Heizlüfter mit 2000 W Schnelle, saubere Wärme für Werkstatt, Keller, Baustelle und weitere Innenbereiche – leistungsstark, sicher und flexibel einsetzbar. Der Keramik-Heizlüfter Trotec TDS 10 P ist ein kompakter und leistungsstarker Elektroheizer für die schnelle Beheizung von Innenräumen, Werkstätten, Kellern, Lagerbereichen und Baustellen. Mit einer maximalen Heizleistung von 2000 Watt sorgt das Gerät schnell für angenehme Wärme und eignet sich mit seiner robusten Metallkonstruktion auch für anspruchsvollere Einsatzbereiche. Das langlebige keramische PTC-Heizregister erwärmt die angesaugte Raumluft besonders schnell und effizient. Im Gegensatz zu herkömmlichen Heizdrähten wird die Keramik nicht glühend heiss. Dadurch entsteht keine Staubverbrennung während des Heizvorgangs, was den TDS 10 P auch für Allergiker interessant macht. Gleichzeitig arbeitet das Gerät ohne Verbrennungsprozess, verbraucht keinen Sauerstoff und erzeugt keine Verbrennungsabgase oder Kondensate. Für eine schnelle und gleichmässige Verteilung der erwärmten Luft sorgt das leistungsstarke Radialgebläse. Mit einer Luftmenge von bis zu 227 m³/h wird die Raumluft effektiv umgewälzt. Auch ohne Heizfunktion kann der TDS 10 P als Ventilator zur Belüftung eingesetzt werden. Der Keramik-Heizlüfter wurde für einen unkomplizierten und mobilen Einsatz konzipiert. Dank seiner kompakten Abmessungen und des geringen Gewichts von nur 3 kg lässt er sich einfach transportieren und am gewünschten Einsatzort aufstellen. Die robuste Metallkonstruktion ermöglicht den Einsatz beispielsweise in Kellern, Lagern, Werkstätten, Baucontainern, Garagen, auf Innenbaustellen oder an überdachten Marktständen. Auch die Sicherheit wurde bei der Konstruktion berücksichtigt. Der integrierte Überhitzungsschutz schaltet das Gerät bei einer kritischen Temperatur automatisch ab. Zusätzlich verfügt der TDS 10 P über einen Kippschutz-Schalter, der die Heizung deaktiviert, sobald das Gerät unbeabsichtigt umkippt. Die Auto-Restart-Funktion ermöglicht nach einer Stromunterbrechung die automatische Wiederaufnahme des Betriebs. Mit einem Schalldruckpegel von 48 dB(A) bei 1 m Abstand arbeitet der Heizlüfter vergleichsweise leise. Der TDS 10 P ist für Räume bis etwa 25 m² bzw. 60 m³ ausgelegt und eignet sich damit ideal als Zusatzheizung oder zur schnellen Erwärmung kleinerer Arbeits- und Aufenthaltsbereiche. Eigenschaften: Maximale Heizleistung 2000 W Zwei Heizstufen plus Kaltluftstufe Leistungsstarkes Radialgebläse Luftmenge bis 227 m³/h Langlebiges keramisches PTC-Heizregister Stufenlose Temperaturregelung per Thermostat Integrierter Überhitzungsschutz Kippschutz-Sicherheitsabschaltung Auto-Restart-Funktion Robuste Metallkonstruktion Tragbar und einfach zu bedienen Kondensfreie Wärme ohne Sauerstoffverbrauch Langlebiges PTC-Keramik-Heizelement Das keramische PTC-Heizregister bildet das Herzstück des TDS 10 P. Im Vergleich zu herkömmlichen Heizdrähten bietet die PTC-Technologie eine längere Lebensdauer, eine unempfindlichere Technik und ein schnelles Aufheizverhalten. Ein weiterer Vorteil: Da keine glühenden Heizdrähte eingesetzt werden, kommt es während des Heizvorgangs nicht zur Verbrennung von Staub. Dadurch eignet sich der Keramik-Heizlüfter auch für Allergiker. Die Wärme entsteht ausserdem ohne Verbrennung, sodass weder Sauerstoff verbraucht noch Verbrennungsabgas erzeugt wird. Flexible Heizleistung mit drei Betriebsstufen Der TDS 10 P bietet eine reine Kaltluftstufe sowie zwei Heizstufen. In der ersten Stufe arbeitet ausschliesslich das Gebläse. Die zweite Stufe liefert 1400 Watt, während die dritte Stufe die maximale Heizleistung von 2000 Watt bereitstellt. Über das integrierte Thermostat kann die gewünschte Temperatur zusätzlich stufenlos geregelt werden. Leistungsstarkes Radialgebläse Das integrierte Radialgebläse sorgt mit einer Luftmenge von bis zu 227 m³/h für eine schnelle und gleichmässige Verteilung der erwärmten Luft. Dadurch wird die Raumluft effektiv umgewälzt und die gewünschte Temperatur schnell erreicht. In der separaten Kaltluftstufe kann das Gerät auch ohne Heizfunktion zur Belüftung eingesetzt werden. Mehr Sicherheit durch Überhitzungs- und Kippschutz Der TDS 10 P verfügt über mehrere integrierte Sicherheitsfunktionen. Der Überhitzungsschutz reagiert bei einer Temperatur von 75 °C und schützt das Gerät vor übermässiger Erwärmung. Zusätzlich schaltet der integrierte Kippschutz den Heizlüfter automatisch ab, wenn er unbeabsichtigt umkippt. Die Auto-Restart-Funktion ermöglicht nach einer Unterbrechung der Stromversorgung eine automatische Wiederaufnahme des Betriebs. Dadurch eignet sich das Gerät auch für Anwendungen, bei denen ein unbeaufsichtigter Neustart nach einer kurzzeitigen Stromunterbrechung erforderlich ist. Vielseitig einsetzbar Dank seiner robusten Metallkonstruktion und der mobilen Bauweise eignet sich der TDS 10 P für zahlreiche Einsatzbereiche. Dazu gehören beispielsweise Keller, Lager, Werkstätten, Garagen, Innenbaustellen, Baucontainer, überdachte Marktstände sowie weitere Arbeits- und Nebenräume. Mit einer empfohlenen Raumgrösse von bis zu 25 m² bzw. 60 m³ eignet sich der kompakte Heizlüfter insbesondere für kleinere Räume und als flexible Zusatzheizung. Der angegebene Arbeitsbereich reicht von -15 °C bis +25 °C.  Technische Daten Trotec Artikelnr. 1.410.000.040 Heizleistung Stufe 1 Nur Ventilation Heizleistung Stufe 2 1400 W Heizleistung Stufe 3 2000 W Maximale Heizleistung 2 kW Heizleistung 1719 kcal Luftmenge 227 m³/h Ventilator Radial Gebläsestufen 1 Arbeitsbereich -15 °C bis +25 °C Netzanschluss 220 – 240 V / 50 Hz Nennstromaufnahme 9,1 A Netzabsicherung 10 A Leistungsaufnahme 2 kW Steckerart EU-Stecker + Fixadapter für die Schweiz Kabellänge 1.3 m Thermostat Integriert Mobilität Tragbar Schallpegel bei 1 m Abstand 48 dB(A) Überhitzungsschutz Ja, 75 °C Kippschutz Ja Auto-Restart Ja Heizelement Keramisches PTC-Heizregister Gehäusematerial Metall Schutzart IP20 Abmessungen (Tiefe x Breite x Höhe) 160 x 205 x 322 mm Gewicht 3 kg Empfohlene Raumgrösse 25 m² / 60 m³ Mindestabstand alle Seiten 50 cm Garantie 2 Jahre

Learn more More Fewer

Trotec TEH 20 T Electric Heater – Professional Quality in Industrial Design Focused warm air for the toughest applications: Robust, stackable, and precisely adjustable. The TEH 20 T impresses with its functional German industrial design and an extremely robust sheet steel housing with protective coating. Thanks to the flow-optimised chassis, the hot air is directed precisely without turbulence. The double-walled housing minimises the heating of the outer casing, which significantly increases operational safety. Important note on connection (Switzerland): Due to its power consumption (11.4 A), the device is supplied with a T23 fixed adapter. This fits into T23 sockets (rectangular pins, 13A/16A fuse protection) as well as into power distributors with T25 sockets. It is not compatible with conventional household sockets (T13). Highlights Precise Control: Stepless thermostat for constant room temperature. Trotec Ergo-Grip: Secure hold thanks to innovative grip recess with Grip-Clip. Stacking System: Safely stackable thanks to practical grooves on the top. Easy Maintenance: Designed for durable professional use. Key Facts Heating Power: 2.5 kW (2150 kcal) Airflow: Focused jet via axial fan Hose Connection: 155 mm diameter (max. 7m length) Safety: Integrated overheating protection (60 °C) Technical Data Power / Current Consumption 2.5 kW / 11.4 A (recommended fuse protection 16 A) Power Connection 230 V / 50 Hz (2.75 m cable incl. T23 adapter) Dimensions (L x W x H) 325 x 260 x 332 mm Weight 10.5 kg Sound Pressure Level 62 dB(A) (1 m distance) Warranty 2 years

Learn more More Fewer

Trotec TDS 20 C – Leistungsstarker Keramik-Heizlüfter für schnelle Wärme Kompakter 3-kW-Keramik-Heizlüfter mit moderner PTC-Technologie, 2 Heizstufen und zusätzlicher Kaltluftfunktion. Der Trotec TDS 20 C sorgt schnell und zuverlässig für angenehme Wärme in Innenräumen. Dank seines leistungsstarken keramischen PTC-Heizregisters erwärmt der kompakte Elektro-Heizlüfter die Raumluft effizient und gleichmässig. Mit einer maximalen Heizleistung von 3000 Watt eignet sich das Gerät für Räume bis etwa 30 m² bzw. 75 m³. Zwei Heizstufen ermöglichen eine bedarfsgerechte Wärmeregulierung. Zusätzlich steht eine Kaltluftstufe zur Verfügung, sodass sich der TDS 20 C auch zur Belüftung einsetzen lässt. Die keramische PTC-Technologie bietet dabei einen wichtigen Vorteil: Das Heizelement passt seine Heizleistung temperaturabhängig an und sorgt dadurch für einen effizienten und sicheren Heizbetrieb. Eigenschaften: 3000 W maximale Heizleistung Keramisches PTC-Heizregister 2 Heizstufen Zusätzliche Kaltluftstufe Für Räume bis ca. 30 m² / 75 m³ 3-stufiger Ventilator Überhitzungsschutz Kompakte Bauweise Tragegriff für einfachen Transport Effiziente Wärme dank keramischer PTC-Technologie Das keramische PTC-Heizelement des TDS 20 C ermöglicht eine schnelle und zuverlässige Erwärmung der Raumluft. Im Gegensatz zu herkömmlichen Heizdrähten passt sich die Leistungsaufnahme eines PTC-Heizelements an die Temperaturentwicklung an. Dadurch wird eine effiziente und kontrollierte Wärmeabgabe unterstützt. Die Keramik-Technologie macht den Heizlüfter besonders für den Einsatz in Wohn-, Hobby- und Arbeitsbereichen interessant, wenn kurzfristig zusätzliche Wärme benötigt wird. Individuell regulierbare Heizleistung Mit seinen zwei Heizstufen lässt sich die Wärmeleistung des TDS 20 C flexibel an den jeweiligen Bedarf anpassen. Für die schnelle Erwärmung steht die maximale Leistung von bis zu 3000 Watt zur Verfügung. Zusätzlich verfügt das Gerät über eine Kaltluftstufe. Damit kann der Ventilator auch ohne Heizfunktion betrieben werden und unterstützt die Luftzirkulation im Raum. Vielseitig einsetzbar Der TDS 20 C eignet sich zur schnellen Zusatzbeheizung von Innenräumen mit einer Grösse von bis zu etwa 30 m² bzw. 75 m³. Durch seine kompakte Bauweise und den integrierten Tragegriff lässt sich der Heizlüfter unkompliziert an unterschiedlichen Einsatzorten verwenden. Ob Werkstatt, Hobbyraum, Büro, Keller, Garage oder andere Innenbereiche – der TDS 20 C liefert bei Bedarf schnell zusätzliche Wärme. Sicherer Heizbetrieb Für einen sicheren Betrieb ist der TDS 20 C mit einem Überhitzungsschutz ausgestattet. Das Gerät wurde für einen zuverlässigen und kontrollierten Heizbetrieb konzipiert und verbindet leistungsstarke Wärme mit einer kompakten, robusten Bauweise. Hinweis zum Schweizer Fixadapter Der TDS 20 C wird mit einem ca. 1,6 m langen Anschlusskabel mit EU-Stecker und Fixadapter Typ 23 für die Schweiz geliefert. Bitte beachten: Der mitgelieferte Fixadapter Typ 23 passt nur auf entsprechende Typ-23-Steckdosen. Diese erkennen Sie an den viereckigen Kontaktöffnungen statt der runden Öffnungen. Bitte prüfen Sie vor der Inbetriebnahme, ob an Ihrem Einsatzort eine passende Typ-23-Steckdose vorhanden ist. Vorteile im Überblick • Bis zu 3000 W Heizleistung für schnelle Wärme • Keramisches PTC-Heizregister für effiziente Wärmeabgabe • 2 Heizstufen für bedarfsgerechte Temperaturregelung • Zusätzliche Kaltluftstufe zur Luftzirkulation • 3-stufiger Ventilator • Geeignet für Räume bis ca. 30 m² bzw. 75 m³ • Kompakte und robuste Bauweise • Einfacher Transport dank integriertem Tragegriff • Überhitzungsschutz für einen sicheren Betrieb • Anschlusskabel mit EU-Stecker und Fixadapter Typ 23 für die Schweiz Technische Daten Heizleistung 3000 W Heizstufen 2 Kaltluftstufe Ja Geeignete Raumgrösse Ca. 30 m² Geeignetes Raumvolumen Ca. 75 m³ Heizelement Keramisches PTC-Heizregister Ventilator 3-stufig Betriebsgeräusch Ca. 55 dB(A) Leistungsaufnahme Max. 3.000 W Überhitzungsschutz Ja Anschlusskabel Ca. 1,6 m mit EU-Stecker und Fixadapter Typ 23 für die Schweiz Fixadapter Typ 23 – nur für entsprechende Typ-23-Steckdosen mit viereckigen Kontaktöffnungen geeignet Garantie 2 Jahre

Learn more More Fewer

TDS 30 R – Electric heater 5 kW Professional electric fan heater for construction sites, workshops and indoor areas Professional electric heater with 5 kW heating capacity The TDS 30 R is a robust and powerful electric fan heater with up to 5 kW heating capacity for professional use. Thanks to the electric heating principle, the unit operates without consuming oxygen, without combustion exhaust gases and without condensation. The compact 400 V electric heater is particularly suitable for unheated indoor areas, workshops, garages, construction sites, assembly areas, warehouses and industrial halls as well as other commercial applications. Electric fan heater for demanding applications The TDS 30 R was developed for reliable use in demanding environments. As an electric construction heater, it produces clean and condensation-free heat without consuming oxygen from the room air. This makes the fan heater particularly suitable for heating enclosed or poorly ventilated indoor areas. As no combustion exhaust gases are generated, no exhaust air ducting is required. Typical areas of application include construction sites, workshops, garages, automotive repair shops, warehouses, industrial halls, shipbuilding areas, agriculture and commercial interior spaces. Flexible heating capacity and integrated thermostat The desired warm air temperature can be set via the integrated, infinitely variable thermostat. The heating capacity can be adjusted to the respective heat requirement via two heating stages. Additionally, the TDS 30 R features a separate fan stage without heating function. This allows the unit to be used for pure air circulation as well. Ventilation only with 0.05 kW Heating operation with 2.5 kW Maximum heating capacity 5 kW Infinitely adjustable thermostat Robust metal housing and high mobility The housing of the electric heater is made of fully galvanized and painted sheet steel. This makes the TDS 30 R designed for use in demanding environments. The ergonomic carrying and transport handle allows for easy relocation. Weighing only 5 kg, the compact fan heater is particularly easy to transport and use flexibly. Safety and reliable operation The TDS 30 R features several integrated safety functions. These include overheating protection, tilt protection, thermal protection for the blower motor as well as a fan run-on function. After switching off, the fan can continue to run to dissipate residual heat remaining in the unit in a controlled manner. This reliably cools down the components. Safety benefit: Electric heating produces no combustion exhaust gases and no condensing moisture. This makes the TDS 30 R particularly suitable for heating indoor spaces. Your benefits at a glance Maximum heating capacity of 5 kW 400 V connection with CEE 16 A Robust metal housing Compact design and low weight Integrated, infinitely variable thermostat Condensation-free heat without oxygen consumption Overheating protection Tilt protection Blower motor with thermal protection Fan run-on function Pure fan operation possible Ergonomic carrying and transport handle Possible areas of application Car and automotive workshops Construction sites and assembly operations Warehouses and industrial halls Garages and workshops Shipbuilding and industrial applications Agricultural sectors Catering/hospitality Greenhouses Technical data Trotec item no. 1410000003 Heating element Stainless steel heating coil Operating principle Electric Housing design Metal Fan type Axial Dimensions and weight Length without packaging 275 mm Width without packaging 220 mm Height without packaging 330 mm Weight without packaging 5 kg Weight including packaging 5.5 kg Performance and power supply Mains connection and frequency 400 V / 50 Hz Connection plug CEE 16 A, 5-pin Nominal current consumption 7.22 A Maximum heating capacity 5 kW (4,300 kcal/h) Recommended fuse 16 A Cable length 1.2 m Heating capacity and air volume Heating stages 1: Ventilation only (0.05 kW) 2: Ventilation + heating (2.5 kW) 3: Ventilation + heating (5 kW) Max. air volume 580 m³/h Fan stages 1 Max. temperature increase at 1 m 85 °C Operating conditions and safety Temperature range -15 °C to 25 °C Sound level at 1 m distance 56 dB(A) IP rating IP20 Safety functions Auto-restart function, fan run-on function, tilt protection Mobility Carrying/transport handle(s) Warranty 2 years

Learn more More Fewer

TDS 30 M – Electric Heater 5 kW with PTC Ceramic Professional fan heater with PTC technology for construction sites, workshops, and commercial use Powerful 5 kW fan heater with PTC technology The TDS 30 M is a professional electric heater with 5 kW heating capacity and a long-lasting PTC ceramic heating element. Thanks to its high airflow rate, this compact fan heater is ideal for rapidly heating large and cold rooms. The device operates on 380–400 V high-voltage current and offers two heating levels as well as a separate cold-air mode. The robust construction and stable feet make the TDS 30 M a reliable solution for construction sites, workshops, warehouses, production halls, and commercial spaces. PTC ceramic technology for uniform warmth The long-lasting PTC ceramic heating element offers numerous advantages over conventional heating coils. The flow of warm air is generated more evenly and without drafts, and noise levels remain comparatively low. A special benefit of PTC technology is the self-regulating power consumption. The PTC heating element adjusts its output depending on the ambient temperature. This allows for more uniform heat distribution and reduces the risk of overheating. Since the PTC heater works without classic glowing heating coils, there is no burning of dust on hot heating wires. As a result, the indoor air is not additionally burdened by burnt dust. Advantages of the PTC heater Self-regulating PTC ceramic technology More uniform room temperature and lower temperature fluctuations Consistent and draft-free warm airflow No dust burning on classic heating coils Integrated overheating protection Thermal protection and fan run-on function Infinitely adjustable thermostat Condensation-free heat without oxygen consumption Heat-insulated carrying handle Robust metal housing Safe and reliable operation The TDS 30 M features several integrated protective functions for reliable operation. These include overheating protection, thermal protection, and an auto-restart function. Positioning the controls below the heating area protects the electronics from rising residual heat, thus contributing to the high reliability of the device. The fan motor is also equipped with thermal protection. The fan run-on function further supports the controlled cooling of the components after the heating operation. PTC advantage: The ceramic heating element independently adjusts its power consumption to the ambient temperature, thereby contributing to safe and uniform heating operation. Heating capacity and operating modes The maximum heating capacity is 5 kW. Two heating levels are available via the function switch. In addition, the TDS 30 M can be used solely as a fan without the heating function. Ventilation only – 0.05 kW Ventilation + Heating – 3.3 kW Ventilation + Heating – 5 kW Max. airflow 575 m³/h Robust construction and easy mobility The robust metal housing is designed for use in demanding environments. The feet ensure a stable position during operation. Thanks to the integrated heat-insulated carrying and transport handle, the electric heater, weighing only 4 kg, can be easily transported to the desired location. Furthermore, the unit is stackable, making it particularly practical for storage and transport. Potential applications The TDS 30 M is suitable as an electric construction heater, workshop heater, and fan heater for numerous commercial and professional applications. Auto and car workshops Construction sites and assembly operations Warehouses and production halls Workshops and commercial premises Catering/Hospitality Greenhouses Your benefits at a glance 5 kW maximum heating capacity PTC ceramic heating element 380–400 V high-voltage power connection CEE 16 A, 5-pin connection plug 575 m³/h maximum airflow Infinitely adjustable thermostat Fan-only operation possible Condensation-free heat without oxygen consumption Overheating protection Auto-restart function Fan motor with thermal protection Fan run-on function Stable feet Stackable for space-saving storage Technical data Trotec item no. 1410000054 Heating element PTC ceramic heating element Operating principle Electric Housing design Metal Fan type Axial Storage capacity Stackable Dimensions and weight Length excluding packaging 250 mm Width excluding packaging 205 mm Height excluding packaging 360 mm Weight excluding packaging 4 kg Weight including packaging 5 kg Performance and power supply Mains connection and frequency 380–400 V / 50 Hz Connection plug CEE 16 A, 5-pin Nominal current consumption 7.6 A Power consumption 5 kW Recommended fuse protection 10 A Cable length 1.15 m Heating capacity and airflow Levels 1: Ventilation only (0.05 kW) 2: Ventilation + Heating (3.3 kW) 3: Ventilation + Heating (5 kW) Max. heating capacity 5 kW (4,300 kcal/h) Max. airflow 575 m³/h Fan stages 1 Max. temperature increase at 1 m distance 90 °C Operating conditions and safety Temperature range -15 °C to 25 °C Sound level at 1 m distance 53 dB(A) IP rating IP20 Overheating protection 98 °C Safety functions Overheating protection, auto-restart function Mobility Carrying/transport handle(s), feet Warranty 2 years

Learn more More Fewer

These robust, industrial fan heaters are equipped with a durable metal housing and are designed for floor-standing use. Thanks to the practical carrying handle and the sturdy rack, they can be easily transported and used flexibly. The operation of the device is incredibly simple: The function switch allows the heating power to be set to either half or full power, and an exclusive fan operation is also possible. An integrated room thermostat ensures a constant temperature by automatically turning off the heating when the set value is reached and keeping the fan running for continuous air circulation. These space heaters are extremely versatile and are ideal for a wide range of applications, including construction heating, garages, workshops, storage rooms, retail spaces, greenhouses, sports and factory halls, as well as many other areas of use.Characteristics• Heating power adjustable up to 9000 watts• Thermostat for regulating and setting the desired temperature• Two heating levels selectable (1 = 4500 watts / 2 = 9000 watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection• Stepless temperature control (5 ~ 35° C)• Integrated protection mechanism against overheating• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• Quiet operation• No oxygen consumption• CE Conformity, 2006/95/EC, 2004/108/EC, EN 60335-1, EN 60335-2-30• Made in ItalyMiscellaneous• A five-pole 16 A high-voltage connection 380V/415V (50/60Hz) with CEE16A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.• No power cable included, the plug is directly on the device. You can find suitable power cables in various lengths and designs with us. Examples of useTemperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden houses, laundry rooms, and for use in professional and hobby activities, etc.Drying: Ideal for faster drying of plaster, screed, etc. (work can be continued or applied very quickly)Damp Rooms: Ideal for damp basements, old walls, and drying all damp objects.Damage Removal: After flooding, after damage from extinguishing water, or in case of decay, these devices are ideally suited to support the drying process.How much heat do I need?Our free heat demand calculator helps you determine the required heating power for your rooms.'Here you can access the online calculator: Calculate heat demand' Technical data Tension 380V - 415V / 50Hz Power consumption 2 stages 4.5 kW / 9 kW Protection max. 16 A Room thermostat 5 - 35°C Air volume flow 800 m³/h Protection class IPX4 Dimensions (H x W x D)   41 x 42 x 32 cm Weight: 9 Kg Operational cessation Drehrad Area of application up to max. 90m² Plug CEE 16 A Guarantee 2 years

Learn more More Fewer

Profi-Elektroheizgebläse TDS 50 E mit 9 kW Heizleistung Kraftvolle, kondensfreie Wärme für Werkstätten, Baustellen und Gewerberäume – mit integriertem Thermostat, zwei Heizstufen und zuverlässigem Überhitzungsschutz. Das Elektroheizgebläse Trotec TDS 50 E ist eine leistungsstarke Lösung für die schnelle Beheizung geschlossener Arbeits- und Nutzräume. Mit bis zu 9 kW Heizleistung und einer Luftmenge von 845 m³/h verteilt das Gerät die erzeugte Wärme effizient und unterstützt ein angenehmes Arbeitsklima auch in kühlen Räumen. Das integrierte Thermostat ermöglicht eine bedarfsgerechte Temperaturregelung. Neben dem reinen Ventilatorbetrieb ohne Heizfunktion stehen zwei Heizstufen mit 4,5 kW und 9 kW zur Verfügung. So lässt sich die Wärmeabgabe an die jeweiligen Anforderungen anpassen. Ein wesentlicher Vorteil ist die kondensfreie Wärme ohne Sauerstoffverbrauch. Im Gegensatz zu direkt befeuerten Gas- oder Ölheizgeräten entstehen bei der elektrischen Wärmeerzeugung keine Verbrennungsabgase. Dadurch eignet sich das Heizgebläse besonders für geeignete Innenräume wie Werkstätten, Baucontainer, Lager- und Arbeitshallen. Auch für den professionellen Einsatz ist das Gerät ausgelegt: Der Gebläsemotor verfügt über einen eigenen Thermoschutz, während ein zusätzlicher Überhitzungsschutz die Betriebssicherheit erhöht. Das kompakte, tragbare Gehäuse erleichtert den Transport zwischen verschiedenen Einsatzorten. Mit seinem kraftvollen Warmluftstrom, der unkomplizierten Bedienung und den abgestuften Heizleistungen ist der TDS 50 E eine praktische Unterstützung überall dort, wo schnell verfügbare elektrische Wärme benötigt wird. Eigenschaften: Maximale Heizleistung von 9 kW Luftmenge bis zu 845 m³/h Integriertes Thermostat Zwei Heizstufen mit 4,5 und 9 kW Separater Ventilatorbetrieb ohne Heizung Kondensfreie Wärme ohne Sauerstoffverbrauch Gebläsemotor mit Thermoschutz Integrierter Überhitzungsschutz 400-V-Drehstromanschluss CEE-Stecker, 5-polig, 16 A Tragbare Bauweise Für geeignete geschlossene Arbeitsräume Flexible Heizleistung und Thermostatregelung Das integrierte Thermostat unterstützt eine bedarfsgerechte Temperaturregelung und sorgt für einen gleichmässigen Warmluftstrom. Je nach Wärmebedarf kann zwischen 4,5 kW und 9 kW gewählt werden. Für die reine Luftumwälzung lässt sich das Gerät ohne zugeschaltete Heizleistung betreiben. Diese Betriebsart eignet sich, wenn Luft bewegt werden soll, ohne zusätzliche Wärme zu erzeugen. Kondensfreie Wärme ohne Sauerstoffverbrauch Da das TDS 50 E elektrisch heizt, entstehen bei der Wärmeerzeugung keine Verbrennungsabgase und es wird kein Sauerstoff verbraucht. Das macht das Gerät zu einer geeigneten Lösung für die Beheizung geschlossener Räume wie Baucontainer, Garagen, Werkstätten, Marktstände, Gastronomiebereiche, Lager- und Arbeitshallen, Werften, Gewächshäuser und Bootsschuppen. In Nassräumen sind die jeweils geltenden Vorschriften für elektrische Geräte einzuhalten. Integrierte Schutzfunktionen Der Gebläsemotor ist mit einem Thermoschutz ausgestattet. Zusätzlich schützt ein Sicherheitsthermostat vor Überhitzung: Bei Überschreiten der zulässigen Betriebstemperatur werden die Heizspiralen abgeschaltet, während der Ventilator weiterläuft. Beim TDS 50 E ist der Überhitzungsschutz auf 55 °C ausgelegt. Für einen sicheren Betrieb müssen Lufteinlass und Luftauslass stets frei bleiben. Das Heizgerät darf nicht abgedeckt werden und muss mit den vorgeschriebenen Abständen zu Wänden, Gegenständen und brennbaren Materialien aufgestellt werden. Aufstellung und Einsatz Das tragbare Elektroheizgebläse ist für die Beheizung geschlossener Räume vorgesehen und muss aufrecht sowie standsicher auf einer waagerechten, stabilen Fläche stehen. Es darf nicht im Freien, in explosionsgefährdeten Bereichen oder in der Nähe leicht entflammbarer Dämpfe verwendet werden. Der elektrische Anschluss erfolgt über ein 400-V-Netz und einen fünfpoligen CEE-Stecker mit 16 A. Die Stromversorgung muss fachgerecht abgesichert sein. Das Gerät darf nicht über eine Zeitschaltuhr oder eine automatische Einschaltvorrichtung betrieben werden, da bei ungünstiger Aufstellung oder Abdeckung Brandgefahr besteht. Technische Daten Modell Trotec TDS 50 E Artikelnummer 1410000087 Maximale Heizleistung 9 kW Heizleistung Stufe 1 Nur Ventilation, ohne Heizung Heizleistung Stufe 2 4,5 kW Heizleistung Stufe 3 9 kW Maximale Luftmenge 845 m³/h Arbeitsbereich −15 °C bis +25 °C Netzanschluss 400 V / 50 Hz (Drehstrom) Maximale Leistungsaufnahme 9000 W Nennstromaufnahme 13 A Netzabsicherung 16 A Steckerart CEE-Stecker, 5-polig, 16 A Kabellänge 1,1 m Schalldruckpegel bei 1 m Abstand 55 dB(A) Schutzart IP24 Überhitzungsschutz Sicherheitsthermostat, 55 °C Gebläsemotor mit Thermoschutz Ja Temperaturregelung Integriertes Thermostat, zwei Heizstufen Abmessungen (L × B × H) 390 × 300 × 430 mm Gewicht 10 kg Mindestabstand seitlich und nach oben 50 cm Mindestabstand Ansaugseite 50 cm Mindestabstand Ausblasseite 100 cm Mindestabstand zu brennbaren Gegenständen vorne 100 cm Garantie 2 Jahre

Learn more More Fewer

Powerful construction heater with 400V / 16A connection for heating construction sites and industrial rooms. Very good price / performance ratio with easy handling. The device is very effective and made almost entirely of metal, making it extremely robust. The connection cable of about 1m length and the CEE16A plug are included in the delivery. As accessories, we offer extension cables in various lengths at affordable prices.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. Quality standards include, for example: durability, compliance with the specified performance, TÜV "GS" certified, of course with CE conformity, recyclable materials, etc.The WDH 9kW series is optimized according to the latest state of technical knowledge.  Advantages at a Glance • Heating power adjustable up to 9000 watts (9 kW)• Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 4500 watts 2 = 9000)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection as well as protected against splashes and small foreign bodies (IP24) • Stepless temperature control (0 ~ 45° C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• Quiet operation• No oxygen consumption• Tested by Intertek "GS" and CE compliant• WEEE Standards  Miscellaneous • A five-pole 16 A high-voltage connection 380-400 V (50 / 60 Hz) with CEE16A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.  usage examplesTemperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden houses, laundry rooms, and for use in professional and hobby activities, etc. Additionally, also ideal as a frost guard.Drying: Ideal for faster drying of plaster, screed, etc. (Work can be continued or applied very quickly)Damp Rooms: Ideal for damp basements, old walls, and drying all damp objects.Damage Removal: After flooding, after damage from extinguishing water, or in case of decay, these devices are ideally suited to support the drying process.  How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 380V - 400 V / 50HzPower consumption: 2 levels 4.5 kW / max. 9 kWMaximum protection: 16 ARoom thermostat: 0 - 45 °CAir volume flow: 660 m³/hProtection class: IP24(Foreign body protection with ø > 12.5 mm + splash water protection)Dimensions (H/W/D): 43 x 30 x 39 cmWeight: 9.7 kgOperating mode: rotary knobApplication area: up to max. 90 m²Stecker: CEE 16 AWarranty: 2 yearsSeries: WDH-BGP09Special: 1.15 m connection cable included in the delivery

Learn more More Fewer

Powerful 15kW heater for heating larger rooms. Solid metal housing with rack, easy to transport. The blower has a high air circulation volume, which distributes the heat more widely in the room. The device is also suitable for continuous operation on construction sites and for heating large rooms, halls, and tents.  execution• Robust metal housing black• Safety-insulated carrying handles• Room thermostat• Safety thermostat, protects against overheating Miscellaneous• A five-pole 32 A high-voltage connection 380V/415V (50/60Hz) with CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating. Technische data Tension: 400V / 50 Hz Power consumption: 4 levelsOnly Ventilation / 5 kW / 10 kW / max. 15 kW Protection max.: 20.7 A Room thermostat: 4 - 40 °C air volume flow: 1350 m³/h Protection class: IP44 Operating noise: 1 m distance 54 dB(A) (our measurement) Dimensions housing (H/W/D) 44 x 36 x 33 cm Dimensions with rack (H/W/D): 51 x 41 x 33 cm Weight: 18 Kg Business closure: rotary wheel Application area: up to max. 150 m² Plug: CEE 32 A Guarantee: 2 years     How much heating power do I need? As a rough rule of thumb, for closed rooms with normal ceiling height (2.5 m), approximately 1 kW of heating power is required per 10 m². This value depends on insulation and cold load in the room.

Learn more More Fewer

High-quality heater fan with 5kW heating power. Made in Italy - no Chinese products. Robust metal housing with rack and side carrying handles for good stability and easy transport.With the function switch, the device can be set to 1/2 or 1/1 heating power or used only as a fan. A room thermostat maintains the temperature at the set value. When the desired temperature is reached, the heating turns off while the fan continues to run for a constant circulation of room air.These heaters are excellent for heating construction sites, garages, workshops, storage rooms, retail spaces, or even for private hobby rooms and many other applications.  What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.  Execution of this heating blower • Robust metal housing, yellow powder-coated• continuously variable room thermostat• 2-stage adjustable heating power 2.5 kW / 5 kW• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Pure recirculation operation without heating possible• Comparatively quiet operating noise• Heating elements made of stainless steel• Overheating thermostat• Automatic reset in case of overheating of the control• Motor with thermal protection• CEE plug 5-pole 16 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand     Technical data Heating power: 5 kWStages: only recirculation / 2.5 kW / 5 kWAir volume: 510 m³ / hRoom thermostat: continuously adjustable 5-35 °CSound level: 49 dB(A) at a distance of 2.5 mDimensions (H x W x D): 380 x 330 x 440 mmWeight: 6.4 kgMaximum input: 7.2 AConnection: 400V / 50HzCable / Plug: CEE16A, no cableTest certificates: CEProtection class: IP24Warranty: 3 years

Learn more More Fewer

Electric heater TDS 75 – powerful heat up to 15 kW Professional electric heater with three heating stages, high air output and sophisticated safety features – ideal for construction sites, workshops and large rooms. The TROTEC TDS 75 electric heater is a robust fan heater for demanding heating tasks in trade, industry and construction. With a maximum heating capacity of 15 kW and an air flow rate of 1,293 m³/h, the device is suitable for larger rooms, warehouses, workshops and construction site areas. The integrated thermostat control allows for infinitely variable adjustment of the desired temperature. The three operating levels allow you to select either pure fan operation or heating outputs of 5, 10 and 15 kW. This allows the heat output to be flexibly adjusted to the respective requirements. A standard-integrated air baffle supports the targeted emission of warm air and improves its distribution in the room. The fan motor with thermal protection, the overheating protection and the tilt protection complete the features. After the heating is switched off, the fan continues to run to cool down the device components. The auto-restart function allows operation to resume with the previously used settings after a power failure. The recessed controls are designed for practical use and reduce the risk of accidental adjustments. The fan heater produces condensate-free heat without combustion and does not consume oxygen during heat generation. This makes it suitable for heating suitable interior spaces. Actual suitability depends on the operating conditions, room size and electrical installation. The TDS 75 also offers practical advantages when it comes to transport and installation. The trapezoidally mounted carrying handles allow several devices to be stacked stably. Lateral mounting threads also allow installation on walls or ceilings using an optionally available bracket. This allows the fan heater to be used flexibly in various working environments. Features: Maximum heating capacity of 15 kW Three operating levels: ventilation, 5 kW, 10 kW and 15 kW Integrated thermostat control Infinitely variable temperature setting Air baffle for targeted heat emission Overheating protection Fan motor with thermal protection Tilt protection Fan run-on function Auto-restart function Protection class IP24 Stackable carrying handles Wall and ceiling mounting possible Condensate-free heat without oxygen consumption Flexible heat output for different requirements The three heating levels allow the heat output to be adjusted to meet demand. In addition to pure fan operation, heating outputs of 5, 10 and 15 kW are available. The integrated thermostat regulates the desired temperature and supports a constant flow of warm air. With an air flow rate of 1,293 m³/h, the fan heater distributes the generated heat in the room. The integrated air baffle directs the warm air stream precisely outwards and supports efficient heat output. Sophisticated safety functions The integrated overheating protection and the thermally protected fan motor help to protect the device against excessive heat development. Additional tilt protection rounds off the safety equipment. The IP24 protection class offers protection against solid foreign objects 12.5 mm in diameter and larger, as well as against splash water from all directions. After the heating function is switched off, the fan continues to run to cool down the internal components. This ensures residual heat is dissipated. The prescribed safety distances and the instructions in the operating manual must be observed during every use. Auto-restart for comfortable operation After an interruption of the power supply, the electric heater can continue working with the previous settings thanks to the auto-restart function. This is particularly practical in working environments where the most uninterrupted heating operation possible is required. The resumption of operation does not replace the need to check the device after a malfunction. Before using it again, possible causes for an interruption should be checked. Space-saving installation and flexible mounting The trapezoidally arranged carrying handles allow several fan heaters to be stacked stably and facilitate space-saving storage. The recessed operating elements are designed for practical use in everyday work. Using the lateral mounting threads, the device can be mounted on a wall or ceiling using a separately available bracket. Alternatively, flexible floor installation is possible. Versatile areas of application The TDS 75 is suitable for site huts, garages, catering areas, greenhouses, market stalls, storage and work halls, boat sheds, workshops and shipbuilding. The required heating capacity depends on the room size, insulation, desired temperature and environmental conditions. Advantages at a glance • Three operating levels for flexible heat output • Maximum heating capacity of 15 kW • Thermostat control for the desired room temperature • Air baffle for targeted distribution of warm air • Overheating protection and thermally protected fan motor • Tilt protection for additional safety • Fan run-on for cooling down the components • Auto-restart after power interruptions • Protection class IP24 • Condensate-free heat without oxygen consumption • Space-saving stackable and easy to transport • Optional wall and ceiling mounting Technical data Model TROTEC TDS 75 Item number 1410000025 Maximum heating capacity 15 kW / 15,000 W Heating stage 1 5 kW / 5,000 W Heating stage 2 10 kW / 10,000 W Heating stage 3 15 kW / 15,000 W Fan operation Without heating output Maximum air volume 1,293 m³/h Mains connection 3/N/PE, 400 V / 50 Hz Maximum power consumption 15,000 W Nominal current consumption 21.7 A Mains fuse 32 A Plug type CEE 32 A, 5-pin Thermostat control Integrated, infinitely variable temperature control Protection class IP24 Sound pressure level 60 dB(A) according to product page Operating range -15 °C to +25 °C Dimensions (L × W × H) 332 × 405 × 540 mm Weight 15 kg Minimum distance to walls and objects above 50 cm Minimum distance to walls and objects below 50 cm Minimum distance to the side 50 cm Minimum distance to the front 50 cm Auto-restart function Available Fan run-on function Available Tilt protection Available Air baffle Integrated as standard Wall and ceiling mounting Possible with optional bracket Note: The technical data are based on the available TROTEC product information and the operating manual for the TDS series. The current manufacturer's specifications are binding for the electrical connection, minimum distances and safe operation.

Learn more More Fewer

This high-quality heating blower with a heating power of 15 kW impresses with its robust construction and thoughtful functionality. The stable metal housing is equipped with a rack and side carrying handles that ensure a secure stand and uncomplicated transport. Made in Italy, no Chinese goods. The operation of the device is carried out via an intuitive function switch, which allows you to set the heating power to either 7500 W or 15,000 W. Additionally, a pure recirculation mode is available. An integrated room thermostat ensures a constant temperature by automatically turning off the heating when the set value is reached, while the fan provides continuous air circulation. Thanks to its versatile applications, this heater fan is ideally suited for a wide range of uses, including heating construction sites, garages, workshops, storage rooms, retail spaces, and private hobby rooms.   What does the automatic reset function bring?   If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.   Execution of this heating blower • Robust metal housing, yellow powder-coated• continuously variable room thermostat• 2-stage adjustable heating power 7.5 / 15 kW• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Pure recirculation operation without heating possible• Comparatively quiet operating noise• Heating elements made of stainless steel• Overheating thermostat• Automatic reset in case of overheating of the control unit• Motor with thermal protection• CEE plug 5-pole 32 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand     Technical data Heating output 15 kW Steps only recirculation / 7.5 kW / 15 kW Air volume 1700 m³/h Room thermostat continuously variable 5 - 35 °C Sound level 52 dB(A) at a distance of 2.5m Masse (H x B x T) 490 x 470 x 350 mm Weight 15 kg Recording max. 22 A Connection 400V / 50Hz Cable / connector CEE32A, no cable Test certificates THIS Protection class IP24 Guarantee 3 years

Learn more More Fewer

King class of professional fan heaters!This heating blower is very powerful at 18kW and operates with high voltage at a CEE32A socket. It is exceptionally robust and features a strong, ducted warm air jet with a large throw distance. The blower is single-stage on/off, and at the 18kW heating level, the temperature difference between the intake and exhaust air is about 50 °C, with an air volume of around 1700 m3 per hour!The heating power can be selected in two stages: 9 kW / 18 kW. An optional connectable room thermostat for regulating the desired room temperature as well as hoses for directing the blown air are available. The weight is 27 kg; for easy maneuvering, a guide handle and two large wheels are attached to the housing (a short assembly of the handle and wheels is required).This professional heater fan is ideally suited for various applications:• Heating of construction sites, even in unattended continuous operation• Heating of marquee tents• Heating of garages, operational and production halls• Heating smaller rooms to high temperatures by blowing warm air through a hose• etc.The heater is equipped with an overheating protection and a safety thermostat, which activates the ventilation at intervals after switching off, until the heating has cooled down sufficiently.The device comes with a connected high-voltage cable with a cross-section of 4.0mm2 (length approx. 1.5 m with CEE32A plug) included in the delivery.  Characteristics • Manual reset switch• Connection of a room thermostat possible• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Winter-Summer switch (ventilation operation)• Motor with thermal protection• Overheating thermostat• Made in ItalyMiscellaneous:• Requires a CEE32A socket (red round socket with a diameter of approximately 7.1 cm).• Short assembly required before commissioning.• Suitable extension cables in various lengths are available from us at affordable prices.What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.   How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 400V / 50 HzPower consumption: 3 levels Only ventilation / 9 kW / 18 kWMaximum protection: 32 ARoom thermostat: optionalAir volume flow: approx. 1700 m³/hProtection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection)Operating noise: 1 m distance 69 dB(A) (our measurement): 2.5 m distance 72 dB(A)Dimensions with rack (L/W/H): 700 x 490 x 530 mmWeight: 27 kgOperating mode: Rotary switch off - only ventilation - 9 kW - 18 kWApplication area: up to max. 180 m² / 450 m³Stecker: CEE 32 AWarranty: 2 yearsSpecial features: Not suitable for room temperatures above 25°C.Option: Room thermostat, air hoses, air distribution attachment for 2 hoses  

Learn more More Fewer

High-quality heating blower with 9kW heating power. Made in Italy - no Chinese goods. Robust metal housing with rack and side carrying handles for good stability and easy transport.With the function switch, the device can be set to 1/2 or 1/1 heating power or used only as a fan. A room thermostat maintains the temperature at the set value. When the desired temperature is reached, the heating turns off while the fan continues to run for a constant circulation of the room air.These heaters are excellently suited for heating construction sites, garages, workshops, storage rooms, retail spaces, or even for private hobby rooms and many other applications.   What does the automatic reset function bring?   If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.   Execution of this heating blower • Robust metal housing, yellow powder-coated• continuously variable room thermostat• 2-stage adjustable heating power 4.5 kW / 9 kW• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Pure recirculation operation without heating possible• Comparatively quiet operating noise• Heating elements made of stainless steel• Overheating thermostat• Automatic reset in case of overheating of the control• Motor with thermal protection• CEE plug 5-pole 16 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand     Technical data Heating output: 9 kWStages: only recirculation / 4.5 kW / 9 kWAir volume: 800 m³/hRoom thermostat: continuously adjustable 5 - 35 °CSound level: 51 dB(A) at a distance of 2.5mDimensions (H x W x D): 440 x 420 x 340 mmWeight: 9.3 kgmax. input: 13 AConnection: 400V / 50HzCable / Plug: CEE16A, no cableTest certificates: CEProtection class: IP24Warranty: 3 years

Learn more More Fewer

High-performance 18 kW electric heater Rugged electric heater for large rooms, halls, and construction sites – featuring an air output of 1,785 m³/h, a warm air hose connection, and four power levels. The Trotec TEH 100 is an especially high-performance electric heater for the rapid heating of large rooms, halls, and construction sites. With a maximum air volume of 1,785 m³/h, the unit efficiently distributes the generated heat and, thanks to its robust design, is also suitable for demanding applications. The flow-optimized chassis generates a focused warm air stream with low turbulence losses. This allows the warm air to be directed to more distant areas via hose runs of up to 15 m. The heat-insulated connection nozzle with a hose support ring ensures a secure hold for the attached warm air hose. An integrated discharge grille further supports directional airflow. The sturdy construction made of protective-coated sheet steel features a double-walled design, which reduces the heating of the outer casing. Its low-maintenance construction and durable materials make the fan heater suitable for regular professional use. The four-stage power control allows the heating output to be adjusted as needed. Level 1 serves as pure fan operation, while heating levels 2 to 4 provide an output of 9 kW, 13.5 kW, and a maximum of 18 kW, respectively. This allows the heat output to be flexibly adapted to the respective application. The unit also impresses with well-thought-out details regarding transport and storage. The fully rotating, rubber-tired metal wheels facilitate relocation. Thanks to the integrated stacking groove, the TEH 100 can be stacked securely with identical units such as the TEH 70. This allows for space-saving storage solutions as well as individual stacking installations for distributing air in different directions. The robust Trotec Ergo recessed grips with an internal grip clip ensure comfortable handling. The practice-optimized German industrial design is a registered design. The integrated overheating protection further increases operational safety. Features: 18 kW maximum heating output 1,785 m³/h maximum air volume Four power levels including fan operation Flow-optimized chassis Warm air hose connection Ø 300 mm Hose lengths up to 15 m Heat-insulated connection nozzle with hose support ring Double-walled metal housing Robust sheet steel construction Stackable with identical units Stacking groove for secure hold Fully rotating transport wheels Overheating protection Maintenance-friendly construction Trotec Ergo recessed grips Targeted warm air distribution The heat-insulated connection nozzle with an integrated hose support ring enables the secure attachment of a warm air hose. In combination with the flow-optimized chassis, a focused air stream is created, which can be efficiently guided even through hoses up to 15 m long. The integrated discharge grille additionally supports directional heat distribution. Flexible power control The robust step switch allows for demand-oriented adjustment of the heating output. In addition to pure fan operation, three heating levels are available with 9 kW, 13.5 kW, and 18 kW. The maximum temperature increase is 38 °C. Space-saving stacking and transport The identical stacking groove allows for secure combination with models of the same dimensions, such as the TEH 70. This enables space-saving storage and flexible heating setups, for example, 180-degree stacking installations for distributing warm air in multiple directions. The fully rotating, rubber-tired metal wheels facilitate transport and can be locked via the wheel stop in the stacking groove during stacking installations. Robust and low-maintenance construction The double-walled housing made of protective-coated sheet steel reduces the heating of the outer casing and is designed for high load capacity. The maintenance-friendly design, the robust Ergo recessed grips with an internal grip clip, and the practice-optimized German industrial design support reliable use in professional environments. Advantages at a glance • 18 kW maximum heating output • 1,785 m³/h maximum air volume • Four power levels including fan operation • Flow-optimized chassis for focused warm air • Warm air hose connection with hose support ring • Hose operation up to 15 m • Double-walled, protective-coated sheet steel housing • Stackable with identical units • Stacking groove for secure storage and transport • Rubber-tired, fully rotating transport wheels • Maintenance-friendly construction • Overheating protection Technical data Trotec item no. 1410000220 Product information Max. stacking height 3 Storability stackable Fan type axial Dimensions and weight Length without packaging 465 mm Length with packaging 435 mm Width without packaging 425 mm Width with packaging 495 mm Height without packaging 555 mm Height with packaging 600 mm Weight without packaging 27.5 kg Weight including packaging 29.5 kg Hose connection diameter 300 mm Max. hose length 15 m Electrical and heating data Operating principle electrical Heating element Stainless steel heating coil Nominal current consumption 27.3 A Mains connection and frequency 400 V, 50 Hz Power consumption / Max. heating capacity 18 kW Recommended fusing 32 A Cable length 0.75 m Connection plug designation CEE 32 A | 5-pin Overheating protection 60 °C Performance values (heating capacity / air volume) Max. air volume 1785 m³/h Fan stages 1 Heating capacity stage 1 0 kW (fan operation) Heating capacity stage 2 9 kW / 7740 kcal Heating capacity stage 3 13.5 kW Heating capacity stage 4 / Max. 18 kW / 15,480 kcal Max. temperature increase 38 °C Equipment and mobility Housing material Metal Mobility Carrying/transport handle(s), rubber-tired metal wheels Functions On/off switch, overheating protection Other data Noise level (at 1 m distance) 73 dB(A) Optional accessories Extension cable, external thermostat, hoses (300–305 mm), universal tensioning strap

Learn more More Fewer

This powerful 20 kW heater, operated via a CEE32 connection, offers excellent value for money. Its high air circulation allows for efficient and extensive heat distribution in the room, making it the ideal solution for continuous operation on construction sites as well as for heating large rooms, halls, and tents. The robust construction and high performance of this heating device ensure a reliable and constant heat supply even under demanding conditions.Execution • Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 10,000 Watts 2 = 20,000 Watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection and protected against splashes and small foreign objects (IPX4)• Stepless temperature control (0 ~ 40 °C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• No oxygen consumption, therefore also suitable for closed indoor spaces -> Maintain safety distances• The plug is located directly on the device (CEE 32A), suitable cables are available from us (CEE32A Q6.0mm²)• TÜV Rheinland "GS" tested as well as certificates CE, EMC, LVD, WEEEMiscellaneous• A five-pole 32 A high-current connection 380V/415V (50/60Hz) with a CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating. How much heating power do I need?As a rough rule of thumb, for closed rooms with normal ceiling height (2.5 m), approximately 1 kW of heating power is required per 10 m². This value depends on insulation and cold drafts in the room.Technical data Heating output 10'000 / 20'000 W Heizart resistance heating Recommended max. room size 250 m² (600 m³) voltage 380 - 400 V / 50 Hz Power consumption max. 20'000 W Connection 32A Fan speeds 1 Air volume ca. 3084 m³ / h Cable length no cable Plug CEE32A plug Dimensions W x H x D 600 x 430 x 380 mm Weight 19.5 kg Protection class IPX4 Thermostat control and Guarantee 2 years

Learn more More Fewer

Elektroheizer TDS 100 – leistungsstarke Wärme für Gewerbe und Bau 22 kW Heizleistung, hoher Luftdurchsatz und flexible Aufstellung – für die professionelle Beheizung grosser Räume, Werkstätten und Lagerhallen. Der TROTEC Elektroheizer TDS 100 ist ein leistungsstarkes Elektroheizgebläse für anspruchsvolle Beheizungsaufgaben in Gewerbe, Industrie und Bauwesen. Mit einer maximalen Heizleistung von 22 kW und einem Luftdurchsatz von bis zu 1'632 m³/h stellt er grosse Wärmereserven für weitläufige Räume, Lagerhallen und Arbeitsbereiche bereit. Die integrierte Thermostatsteuerung ermöglicht eine bedarfsgerechte Regulierung der gewünschten Raumtemperatur. Zwei Heizstufen mit 11 und 22 kW erlauben eine flexible Anpassung der Heizleistung. Zusätzlich lässt sich das Gerät im reinen Ventilatorbetrieb ohne Heizfunktion einsetzen, beispielsweise zur Luftumwälzung oder zum Abkühlen der internen Komponenten nach dem Heizbetrieb. Für einen sicheren Betrieb sorgen der integrierte Überhitzungsschutz, der thermisch geschützte Gebläsemotor und die Schutzart IP24. Die kondensfreie elektrische Wärmeerzeugung verbraucht keinen Sauerstoff und eignet sich deshalb zur Beheizung geeigneter Innenräume. Die tatsächliche Eignung hängt von den jeweiligen Einsatzbedingungen und den erforderlichen Lüftungsmassnahmen ab. Auch bei der Handhabung überzeugt der TDS 100 mit praxisorientierten Details. Die trapezförmig angeordneten Tragebügel ermöglichen ein standsicheres Stapeln von bis zu drei Geräten. Schutzvertieft angeordnete Regler reduzieren das Risiko unbeabsichtigter Verstellungen. Seitliche Befestigungsgewinde ermöglichen ausserdem die Montage an Wand oder Decke mit einer separat erhältlichen Halterung. Ob auf Baustellen, in Baucontainern, Garagen, Werkstätten, Gewächshäusern oder Lager- und Arbeitshallen: Der TDS 100 verbindet hohe Heizleistung mit robuster Metallkonstruktion und vielseitigen Aufstellungsmöglichkeiten. Das Gerät ist für den professionellen Einsatz an einem geeigneten 400-V-Drehstromanschluss ausgelegt. Eigenschaften: Maximale Heizleistung von 22 kW Zwei Heizstufen: 11 und 22 kW Integrierte Thermostatsteuerung Ventilatorbetrieb ohne Heizung Maximaler Luftdurchsatz von 1'632 m³/h Überhitzungsschutz Gebläsemotor mit Thermoschutz Ventilator-Nachlauffunktion Automatische Neustartfunktion Schutzart IP24 Stapelbar bis zu drei Geräten Wand- und Deckenmontage möglich Robustes Metallgehäuse Hohe Heizleistung und regulierbare Wärme Mit einer maximalen Heizleistung von 22 kW eignet sich der Elektroheizer für grosse Räume und professionelle Arbeitsumgebungen. Die beiden Heizstufen mit 11 und 22 kW ermöglichen es, die Wärmeabgabe an den jeweiligen Bedarf anzupassen. Das integrierte Thermostat unterstützt eine gleichmässige Temperaturregelung und sorgt für einen bedarfsgerechten Warmluftstrom. Die maximale Temperaturerhöhung beträgt laut Hersteller 112 °C. Der tatsächliche Temperaturanstieg hängt von den Betriebsbedingungen und dem Luftstrom ab. Sicherer Betrieb und praktische Nachlauffunktion Der Überhitzungsschutz und der thermisch geschützte Gebläsemotor unterstützen einen sicheren Betrieb. Nach dem Heizvorgang läuft der Ventilator nach, um die internen Komponenten abzukühlen. Die automatische Neustartfunktion gehört ebenfalls zur Ausstattung. Die Schutzart IP24 bietet Schutz gegen feste Fremdkörper ab 12,5 mm Durchmesser sowie gegen Spritzwasser aus allen Richtungen. Sie ersetzt keine Prüfung der konkreten Einsatzbedingungen und der elektrischen Installation. Flexibel aufstellen und platzsparend lagern Die trapezförmig montierten Tragebügel unterstützen ein standsicheres Stapeln von bis zu drei Geräten. Dadurch lässt sich der vorhandene Lagerplatz effizient nutzen. Die schutzvertieft angeordneten Bedienelemente sind auf die Anforderungen im professionellen Arbeitsalltag ausgelegt. Über die seitlichen Befestigungsgewinde kann der TDS 100 mit einer optionalen Halterung an Wand oder Decke montiert werden. So lässt sich das Heizgebläse je nach räumlichen Gegebenheiten flexibel positionieren. Vielseitige Einsatzbereiche Der Elektroheizer eignet sich unter anderem für Baucontainer, Garagen, Werkstätten, Gastronomiebereiche, Gewächshäuser, Marktstände, Lager- und Arbeitshallen, Bootsschuppen sowie den Schiffsbau. Für den jeweiligen Einsatz müssen die erforderliche Heizleistung, die Raumverhältnisse und die elektrischen Anschlussbedingungen berücksichtigt werden. Vorteile im Überblick • Leistungsstarke elektrische Beheizung für grosse Räume • Einstellbare Wärmeabgabe für unterschiedliche Anforderungen • Thermostatgesteuerte Temperaturregelung • Zusätzliche Luftumwälzung ohne Heizbetrieb • Nachlauf zur Abkühlung der Gerätekomponenten • Schutzfunktionen für den professionellen Einsatz • Standsicher stapelbar und platzsparend lagerbar • Optionale Befestigung an Wand oder Decke • Kondensfreie Wärmeerzeugung ohne Sauerstoffverbrauch • Robuste Bauweise für vielseitige Einsatzbereiche Technische Daten Modell TROTEC TDS 100 Artikelnummer 1410000030 Maximale Heizleistung 22 kW / 18'920 kcal/h Heizstufe 1 11 kW Heizstufe 2 22 kW Ventilatorbetrieb ohne Heizung 0 kW Heizleistung Luftmenge maximal 1'632 m³/h Temperaturerhöhung maximal 112 °C Temperaturregelung Integrierter Thermostat, zwei Heizstufen Gebläsestufen 1 Ventilatortyp Axial Heizelement Edelstahl-Heizspirale Leistungsaufnahme 22 kW Netzanschluss 400 V, 50 Hz Nennstromaufnahme 32 A Empfohlene Absicherung 35 A Anschlussstecker CEE 63 A, 5-polig Schutzart IP24 Schalldruckpegel 73 dB(A) bei 1 m Betriebstemperatur minimal -15 °C Betriebstemperatur maximal 25 °C Gehäusematerial Metall Länge ohne Verpackung 430 mm Breite ohne Verpackung 440 mm Höhe ohne Verpackung 610 mm Länge mit Verpackung 450 mm Breite mit Verpackung 450 mm Höhe mit Verpackung 630 mm Gewicht ohne Verpackung 20 kg Gewicht inklusive Verpackung 22 kg Maximale Stapelhöhe 3 Geräte Auto-Restart-Funktion Vorhanden Ventilator-Nachlauffunktion Vorhanden Montage Bodenaufstellung oder Wand-/Deckenmontage mit optionaler Halterung Hinweis: Sicherheitsinformationen und Warnhinweise sind in der Geräteanleitung zu beachten. Für den Betrieb ist ein geeigneter elektrischer Anschluss entsprechend den Herstellerangaben erforderlich.

Learn more More Fewer

Very powerful 22 kW version among the fan heaters! Solidly constructed heating blower with rack. High air circulation distributes heat widely in the room. The device is also suitable for continuous operation on construction sites and for heating large rooms, halls, and tents. execution • Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 11,000 Watts 2 = 22,000 Watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection and protected against splashes and small foreign bodies (IP24)• Stepless temperature control (0 ~ 40° C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility due to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• No oxygen consumption, therefore also suitable for closed indoor spaces -> Maintain safety distances• The plug is located directly on the device (CEE 32A), optionally available with a 10m cable (CEE32A Q6.0 mm)   What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.  Miscellaneous • A five-pole 32 A high-current connection 380 V / 415 V (50/60Hz) with CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.   How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand   Technical data Voltage: 400V / 50HzPower consumption: 3 levels Only ventilation / 11kW / max. 22kWMaximum protection: 32 ARoom thermostat: 5 - 35°CAir volume flow: approx. 2400 m³/hProtection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection)Operating noise: 1 m distance 58 dB(A) (our measurement)Dimensions with rack (H / W / D): 63 x 55 x 38 cmWeight: 22 kgOperating mode: rotary knobApplication area: up to max. 220 m²Stecker:  CEE 32 AWarranty: 2 yearsSpecial: The plug is located directly on the device. Suitable cables are available from us in various designs.

Learn more More Fewer

With the "Master EKO9", the manufacturer addresses the topic of comprehensive room disinfection. Using heat, rooms including furniture can be effectively disinfected against pests and viruses with little effort. No chemicals are used in the process. This means that the rooms are immediately ready for use after treatment. This form of cleanliness is particularly promising in the hospitality industry and in industrial spaces. The only requirement for operating the heaters is a high-voltage power connection.Room disinfection against viruses and bacteriaNumerous studies have shown that viruses and bacteria can be eliminated with heat treatments, usually around 60°C, for example:  Coli bacteria: 60 °C / 10 minutes (Source: Loeffler 1886)Typhus: 56°C / 10 minutes (Source: Sternburg 1887)Cholera: 55°C / 15 minutes (Source: Kitasato 1889)Tuberculosis: 63°C / 3 minutes (Source: North & Park 1925)Pest: 60°C / 2 minutes (Source: Gladin 1898)A complete inactivation of the SARS virus, which is structurally very similar to the current coronavirus, was demonstrated after 60 minutes at 67°C (Source: "Stability of SARS Coronavirus in Human Specimens and Environment and Its Sensitivity to Heating and UV Irradiation", Biomedical and Environmental Sciences 16, 246-255 October 2003).Although there are no certified studies available on the SARS-COV-2 (Corona) virus, it is reasonable to assume that disinfection at higher temperatures is likely here as well. According to reports from "REHVA" and "The Lancet Microbe" from April 2020, Chinese laboratories have deactivated the SARS-COV-2 virus (responsible for COVID19) at these temperatures and treatment times:At 56 °C: after 30 minutesAt 70 °C: after 5 minutes  Room disinfection against pestsAs is well known, private apartments and bedrooms, as well as hotels (especially those of a higher category), are often and almost unnoticed infested with pests in mattresses, carpets, and curtains. In addition to chemical treatment, disinfection with heat has also proven to be effective here. As with viruses and bacteria, it is sufficient to heat the room to about 60 °C for a certain period of time. However, insects are not stupid. If the temperature rises too quickly, they change their location. Therefore, it is important that the heat is not generated immediately from zero to a hundred, but is built up over a certain time interval. If the temperature rises slowly, the pests remain in the room and are killed along with their eggs and larvae. In the heat disinfection of furniture, it is crucial that the inventory is brought to the desired temperature down to the core over a certain period of time.With the "Master EKO9", these problems can be solved quickly, cost-effectively, and, if necessary, with the required discretion: The operator can choose the desired target temperature for the treatment. The heating operation then starts, with the software gradually increasing the room temperature by 15°C and holding the intermediate levels for a certain period of time. This prevents the temperature from rising too quickly as described above. The "Master EKO9" also has a measuring probe that can be placed in hard-to-reach areas (for example, in gaps between a sofa or mattress) and measures and monitors the effective core temperature similarly to grilling. application examples• Hotel industry• Medicine, medical practices, hospitals• Industry• Public transport, aviation• Army, Civil Protection• private households• etc.  Thermostatssafety thermostat"switches off the heating device completely when the indoor temperature exceeds 90 °C (heating must be restarted manually)."limiting thermostat"turns off the heating device when the air outlet temperature reaches 75 °C and turns on the heating device when the air outlet temperature drops below 72 °C (automatic process)."    Technical data  Performance 9 kW stages 1 air volume flow 1400 m³ / h room thermostat digital Masse (L x B x H) 550 x 606 x 921 mm Weight 35 kg Power consumption 13.8 A max. power connection 400 V / 50Hz connection cable not included in the delivery scope Plug CEE16A selectable temperature range 0 - 60 °C Operating noise at a distance of 2.5m   72 dB(A) guarantee 2 years  

Learn more More Fewer

15 kW Elektro-Heizlüfter FEH für Baustelle und Industrie Leistungsstarke Wärme für Baustellen, Industriehallen und grosse Räume. Robust konstruiert, flexibel einstellbar und für den anspruchsvollen gewerblichen Einsatz ausgelegt. Der Elektro-Heizlüfter FEH bietet eine Heizleistung von bis zu 15 kW und eignet sich für die Beheizung von Baustellen, Werkstätten, Industriehallen und grosszügigen Räumlichkeiten. Seine robuste Konstruktion und die unkomplizierte Bedienung machen ihn zu einer praktischen Lösung für den professionellen Einsatz. Das widerstandsfähige Metallgehäuse in Königsblau ist stapelbar und verfügt über ein integriertes Rack, das die Lagerung und den Transport erleichtert. Stabile Tragegriffe unterstützen das Handling im Arbeitsalltag. Über drei Heizstufen lässt sich die Leistung passend zum Wärmebedarf auf 5, 10 oder 15 kW einstellen. Alternativ steht eine reine Ventilatorstufe zur Verfügung, mit der die Luft auch ohne Heizbetrieb umgewälzt werden kann. Das integrierte Raumthermostat regelt die Temperatur im Bereich von 4 bis 40 °C. Sobald die eingestellte Zieltemperatur erreicht ist, wird die Heizung abgeschaltet, während der Ventilator für eine kontinuierliche Luftumwälzung weiterläuft. Ein zusätzliches Sicherheitsthermostat schützt vor Überhitzung. Der Anschluss erfolgt über das fest angeschlossene, rund 1,20 m lange Kabel mit fünfpoligem CEE-32-A-Stecker nach Schweizer Norm. Dank Schutzart IPX4 ist das Gerät gegen Spritzwasser geschützt. Damit eignet es sich für vielfältige Einsatzbereiche in Gewerbe und Industrie, sofern die jeweiligen Betriebs- und Sicherheitsbedingungen eingehalten werden. Hinweis: Dieses Modell wird angeboten, solange Vorrat vorhanden ist. Eigenschaften: Heizleistung bis 15 kW Drei Heizstufen: 5 / 10 / 15 kW Separate Ventilatorstufe ohne Heizung Integriertes Raumthermostat Temperaturregelung von 4 bis 40 °C Ventilatorbetrieb zur kontinuierlichen Luftumwälzung bei erreichter Solltemperatur Sicherheitsthermostat als Überhitzungsschutz Robustes, stapelbares Metallgehäuse in Königsblau Integriertes Rack und stabile Tragegriffe Spritzwasserschutz nach IPX4 Fest angeschlossenes Kabel mit CEE-32-A-Stecker Für Baustellen, Werkstätten und Industrie geeignet Flexible Heizleistung und Temperaturregelung Mit den drei wählbaren Heizstufen lässt sich die Wärmeabgabe an den jeweiligen Bedarf anpassen. Die Leistungsstufen von 5, 10 und 15 kW ermöglichen einen flexiblen Betrieb in unterschiedlichen Arbeitssituationen. Für die Luftumwälzung ohne zusätzliche Wärmezufuhr kann der reine Ventilatorbetrieb genutzt werden. Das Raumthermostat regelt die Temperatur automatisch innerhalb seines Einstellbereichs von 4 bis 40 °C. Nach Erreichen der gewünschten Temperatur schaltet die Heizung ab; der Ventilator läuft weiter und unterstützt die gleichmässige Verteilung der Raumluft. Robuste Konstruktion und Sicherheit Das strapazierfähige, königsblaue Metallgehäuse ist auf den Einsatz in anspruchsvollen Arbeitsumgebungen ausgelegt. Durch die stapelbare Bauweise und das integrierte Rack lässt sich der Heizlüfter platzsparend lagern. Die stabilen Tragegriffe erleichtern den Transport und die Positionierung am Einsatzort. Ein Sicherheitsthermostat schützt das Gerät vor Überhitzung. Die Schutzart IPX4 bietet Schutz gegen Spritzwasser. Die Eignung für einen konkreten Einsatzort hängt zusätzlich von den örtlichen Bedingungen, den elektrischen Anschlussvorschriften und den erforderlichen Sicherheitsmassnahmen ab. Elektrischer Anschluss Der FEH wird mit einem fest angeschlossenen Kabel von ca. 1,20 m Länge und einem fünfpoligen CEE-32-A-Stecker nach Schweizer Norm geliefert. Für den Betrieb ist ein geeigneter 400-V-Netzanschluss erforderlich. Die maximale Stromaufnahme beträgt 25 A. Technische Daten Heizleistung 15 kW Leistungsstufen 5 kW / 10 kW / 15 kW Luftvolumenstrom 1550 m³/h Raumthermostat-Bereich 4–40 °C Schalldruckpegel 52 dB(A) Netzanschluss 400 V / 50 Hz Anschlusskabel ca. 1.20 m mit CEE 32 A Stecker (5-polig, Schweizer Norm) Stromaufnahme max. 25 A Schutzart IPX4 (spritzwassergeschützt) Abmessungen (H × B × T) 550 × 410 × 360 mm Gewicht 14.5 kg Garantie 2 Jahre

Learn more More Fewer