This versatile extension ring allows hoses with a 50 mm inner diameter to be connected to connection fittings with a diameter of 38 mm. An ideal aid for professional construction drying and for the restoration of water damage. Suitable for example for the Trotec side channel blowers VE4 and VE6 as well as for the door slot nozzle PlanoPro4. Trotec Article No. 6.100.000.130

Learn more More Fewer

intake filter screenSpare part for insulation layer dryers of the VX series for drying in overpressure and underpressure processes. Trotec Article No. 7.700.000.001

Learn more More Fewer

The joint cross system from Trotec can be expanded as needed by connecting several individual systems with these screw couplings. Trotec Article No. 7.200.000.003

Learn more More Fewer

"Connecting pieces in various designs for connecting air hoses in construction and water damage drying. While the T-pieces have a right-angle arrangement of the nozzles, the Y-pieces have a narrower angle. Available designs:" T-piece  Ø 38 mm (for PVC flexible extract hose Ø 38 mm with thread)Ø 38 mm (without thread for all hoses Ø 38 mm)Ø 50 mm (for PVC flexible extraction hose Ø 50 mm with thread)Ø 50 mm (without thread for all hoses Ø 50 mm)   Technical dataHose distributor 38mm + 50mm

Learn more More Fewer

Unlike conventional sandbags, this granulate bag is very space-saving during transport. The jute bag contains highly absorbent Dryfix granulate and can absorb up to 16 liters of water in a short time. This creates a granulate that fills the entire bag. Subsequently, its application is comparable to sandbags and is ideal for holding back floodwaters or protecting buildings and basement entrances.     Advantages at a Glance   • Space-saving storage before use and during transport • Air-tight packaging that protects against moisture • Environmentally friendly, tear-resistant material made from high-quality jute • Ready for use immediately after a short activation, in just 2 minutes, 10 liters of water have already been absorbed. • Problem-free stacking of protective barriers • No procurement and elaborate refilling of sand necessary     Application   • Remove BAG from the protective packaging. • Activate in water for approx. 2 min. (use existing standing water, immerse in a water basin, or pour over with sufficient water). • Place at the desired location (doors, basement windows, etc.) and stack like conventional sandbags.           

Learn more More Fewer

These easy-to-install stand feet made of aluminum are suitable for the smaller heating plates of the TIH-S series (300S/400S).  The aluminum feet are designed to maintain the optimal distance from the wall when positioned along a wall, ensuring air circulation and the efficiency of the panel. Which models do these feet fit? The frame of the heating plates has the same thickness for all TIH-S models. Therefore, these feet fit all sizes. However, for better stability, we recommend using the slightly larger black feet starting from TIH500S and above.     Product details   • Material: anodized aluminum• Can be used in any room• Easy installation• Maintenance-free• Usable for the heating plates TIH 300 S and TIH 400 S • Scope of delivery: 1 pair (=2 pieces)   Trotec Article No. 1.410.003.001

Learn more More Fewer

DRYFIX absorbs moisture up to 200 times its own volume within minutes and transforms it into a solid gel. This allows spilled liquids to be quickly and efficiently absorbed. The practical helper in the household for textiles, floors, and furniture. Application examples in the household"Binds spilled liquids, such as knocked-over drinks like red wine or water, but also animal urine or vomit."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc. Odors are also trapped and largely absorbed.Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).     Simple application The powder is sprinkled directly into the standing water or on the damp areas. In doing so, it absorbs moisture down to the pores and forms a compact (environmentally friendly) gel, which also encapsulates odors and small particles such as small glass shards. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."   Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc. Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: Seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

By using the Dryfix drying granules "Home" or "Pro", a gel is created that can be easily and quickly re-liquefied with this powder. Sprinkle it over the formed gel after completing the work. After approximately 5 minutes, it transforms back into water.  Advantages • No disposal of the gel necessary• Saves time• Simple application• Safe for the environment   Application example after flat roof renovation or application in the interior or household   1. Sweep the gel formed by the application of Dryfix granulate and fill it into a kettle. 2. Sprinkle some "Flu" granulate onto the gel and stir. 3. Reapply as needed 4. Pour away water            Application example for pipes, lines, or toilets   1. Sprinkle some "Flu" granulate directly onto the gel formed by the application of Dryfix granulate and stir. 2. Rinse with water        Important in flat roof renovation The "Flu" should not be applied in strong sunlight, as the heat generated can damage the top bitumen layer. This is especially true if the powder remains for an extended period. In this case, we recommend not to liquefy the drying granulate directly on the roof, but to collect it in a bucket and liquefy it there. Alternatively, the drying granulate can also be disposed of in a waste bag.  

Learn more More Fewer

The use of a filter mat significantly increases the reliability and lifespan of the water separator WA4i. The mat is simply placed at the bottom of the separator and provides additional protection for the pump against dirt particles.  Scope of delivery: 5 pieces Trotec Article No. 7.160.000.205

Learn more More Fewer

DRYFIX absorbs water up to 200 times its own volume within minutes and transforms it into a solid gel. This allows work areas to be quickly and efficiently dried out, creating a dam that keeps incoming water at bay. Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc.    Simple application The powder is sprinkled in a circle or boundary around the work area directly into the standing water. The water in the work area is completely absorbed, and a dam of gel is formed. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."    Application examples in the household "Binds spilled liquids such as knocked-over drinks, animal urine, and much more."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc.   Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).    Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer

Marker dye for building diagnostics and leak detection.Water-soluble powder for• the tracing and leak detection in drains and wastewater systems• the detection of leaks in flat roofs, terrace drains, and underground garages "It is harmless to humans and animals as well as biologically unproblematic." standard colors The leak detection dyes are available in red, green, blue, and yellow. They are visually detectable without aids. These are dissolved in water in the area to be tested, making the water flow to be examined visible.special paintAdditionally, the leak detection dye is available in fluorescent/uranine. It is most visible under infrared and ultraviolet light.ApplicationThe marking dye is dissolved in water (1 level teaspoon of dye for 10 liters of water). A lower or higher color intensity can be individually adjusted by using more or less dye. Please refer to the safety data sheet and adhere to the recommended dosage.     questions and answers  Are the leak detection dyes also suitable for murky water?Yes. Generally, leak detection involves wastewater or contaminated water. The application is possible with all colors and also with fluorescein. However, for fluorescein, you will additionally need a UV flashlight. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking water or groundwater discharge could be problematic. "We need to check an underground river course. Are your colors approved for this?" Yes. Our colors are very well suited and approved for leak detection in wastewater. However, please contact the relevant environmental authority before use, as it may be possible that you could color a body of water, and then, of course, calls from concerned citizens would arrive at the office. Present our corresponding safety data sheet for this purpose. Please observe the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater discharge could be problematic.Can your colors be used for flat roof leak detection?Yes. You would need to subdivide the roof area, seal the drains, and partially flood sections by adding colors. This way, you can localize the leak. Also, try this with our test fog, which you can push under the roof membrane using a fogger and a side channel blower. If you detect fog escaping here, you have pinpointed the error accurately. Please refer to the safety data sheet and always discuss the applications with the respective environmental authority. Applications involving drinking or groundwater introduction could be problematic.

Learn more More Fewer