Good, affordable household dehumidifier This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower outlet. The hose must be laid with a downward slope, as no pump is included in the device. The hose connection is particularly well designed in this model: if the hose is not permeable or is incorrectly laid (kinked, insufficient slope, etc.), the water is automatically redirected into the bucket, which automatically shuts off the device when full. In other models, backed-up water can lead to leakage from the bottom, which is prevented in this model.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 1-2 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off  Technical data  dehumidification performance at 30 °C / 80 % r.H. 20 liters / day air volume 150 m³/ h Maximum room size 50 m² (125 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 1.8 A Power consumption max. 420W Recommended Coverage 10 A Cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (86g) GWP3 water bucket 3 Liter operating noise 43 dB(A) at 1 m distance 40 dB(A) at a distance of 2.5 m Dimensions L x W x H 253 x 340 x 570 mm Weight 12.5 kg defrosting automatic Electronic, Recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter guarantee 2 years       Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

This extendable rail simplifies the attachment of the exhaust hose to windows with roller shutters and increases the cooling efficiency of mobile air conditioners. It is easily braced into the guide rails on the left and right and can be precisely extended in width up to a maximum of 136cm. The window cover visually harmonizes perfectly with white windows, allowing for an almost invisible discharge of warm air through the window from the outside. The exhaust hose must have a diameter of Ø15 cm; thinner or thicker hoses do not fit this system. The connection nozzle can be placed in either the left or right area.    Advantages at a Glance   • Particularly simple and visually appealing attachment of the exhaust hose to the window• The cooling efficiency of the air conditioning is increased, as less warm air from outside enters the room.• Uncomplicated installation without craftsmen• Stop hanging exhaust hoses out of the windows• Adjustable variable for window widths of approx. 47 to 136 cm     "The following models from our range are compatible:" • Argo: Argo Chronos • Trotec: PAC Series PAC 2100 X, PAC 2600 X, PAC 3000 X A+, PAC 3500 SH, PAC 3900 X     "For casement windows and casement doors as well as tilt windows and tilt doors, please consider our 'HotAirStopper' as a suitable solution." Trotec Article No. 6.100.000.039

Learn more More Fewer

Compact design, simple operation, and convincing features   This comfort dehumidifier is characterized by reliable operation, easy handling, and an affordable price. Thanks to its compact dimensions, it is handy and unobtrusive - it simply does its job in the background.   "It is equipped with a hygrostat-controlled dehumidification automatic system, allowing selection between target humidity levels of 40, 50, or 60%. Additionally, continuous operation is possible. It operates efficiently, and the operating noise for this dehumidification class is pleasant. With a capacity of up to 12 liters per day, it is capable of reliably keeping living and office spaces as well as basements up to an area of 25 m² dry."   The topic of safety is also well thought out: a light warns when the water container is full, and the overflow protection automatically shuts off the operation when the bucket is full. A viewing window also allows a look into the water tank, so the fill level can be checked at any time.     Dehumidification with comfort   Thanks to the direct hose connection, this dehumidifier can also be used in environments where regular manual emptying of the water tank is not always possible. For example, during unattended continuous drying operations in heated hobby rooms or holiday apartments.  The room air is cleaned of dust in the air intake area to prevent the interior of the device from becoming dirty. Additionally, a practical cable and plug holder, a stowable carrying handle, and steerable wheels provide easy transport when needed.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     air circulation   In this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. In a temperate environment, the device can dry about 1-2 loads of laundry per day.   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while using significantly less electricity.   "In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."       Propane (R290) as an environmentally friendly refrigerant in dehumidifiers "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection for 40, 50, or 60 % r.H.• Control panel with LED lighting• Memory function: after a power failure, the dryer resumes operation with unchanged settings -> connection to a timer possible• Continuous operation possible• Very compact and lightweight device in its performance class• Easily accessible air filter, easy to clean and reusable. Filters pet hair, lint, fluff, and dust.• Level warning light when bucket is full• Automatic shut-off when the bucket is full• Recirculation defrost automatic• Direct hose connection     Technical data   dehumidification performance at 30 °C / 80 % r.H. 12 liters / day air volume 118 m³/ h Maximum room size 25 m² (62 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C  moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.5 A Power consumption max. 350W Recommended Coverage 6 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (50g) GWP3 water bucket 2.1 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 215 x 320 x 420 mm Weight 11.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and cable holder and Display shows current room humidity, set air humidity, air quality memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Trotec PAC 3910 X – Starkes Klimagerät zur Kühlung von grösseren Räumen Ein vielseitiges Klimagerät, das Kühl-, Entfeuchtungs- und Ventilationsfunktionen in einem kompakten und mobil einsetzbaren System vereint. Mit einer Kühlleistung von 4.1 kW eignet es sich hervorragend für mittlere bis grössere Räume und schafft selbst an heißen Sommertagen ein spürbar angenehmes Raumklima. Funktionen, die überzeugen 3-in-1-Klimatisierung: Kühlung, Luftentfeuchtung und Ventilation – flexibel wählbar App-Steuerung via Wi-Fi für einfache Bedienung per Smartphone Follow-Me-Funktion: Die Temperatur wird dort gemessen, wo Sie sich befinden – für punktgenaue Klimatisierung Automatikmodus & Timer: Effiziente Steuerung ohne manuelles Eingreifen Nachtmodus: Reduzierte Lautstärke für störfreien Schlaf Schwenkfunktion (Swing) für gleichmässige Luftverteilung im Raum LED-Display & IR-Fernbedienung für komfortable Bedienung aus der Ferne Technische Merkmale im Überblick Artikelnummer 1210002133 Kühlleistung max. 4,1 kW / 14.000 Btu/h Raumgröße empfohlen bis 52 m² / 130 m³ Luftumwälzung max. 425 m³/h Entfeuchtungskapazität bis zu 3.75 l/h Betriebstemperatur 17–35 °C Geräuschpegel 52.3–53.6 dB(A) in 1 m Abstand Gebläsestufen 3 Energieeffizienz Klasse A Kältemittel R290 (230 g, umweltfreundlich) Stromanschluss 220–240 V / 50 Hz Leistungsaufnahme max. 1.6 kW Stecker EU-Stecker mit Schweizer Fixadapter Kabellänge 2.1 m Garantie 2 Jahre Design & Handhabung Kompakte Masse: 467 × 397 × 765 mm (L × B × H) Gewicht: 34 kg Mobil einsetzbar dank Transportrollen und Tragegriff Abluftschlauch: 1.5 m Länge – leicht über Fenster oder Tür zu führen Aufstellfläche: ab 12 m², mit mindestens 30 cm Abstand zur Wand Im Lieferumfang enthalten PAC 3910 X Klimagerät Abluftschlauch & Schlauchadapter Adapter zur Wandmontage Kondensatschlauch Luftfilter IR-Fernbedienung

Learn more More Fewer

Der Trotec TTK99 HEPA ist ein perfekter Allrounder für Ihren Haushalt. Dieser designstarke Luftentfeuchter und Luftreiniger eignet sich optimal zur Trockenhaltung von feuchten Kellern, Garagen und Waschküchen sowie zur schnelleren Wäschetrocknung. Mit seinem Intensiv-Filter sorgt er gleichzeitig für eine effektive Luftreinigung – für ein trockenes und gesundes Raumklima. Raumluftqualität im Blick: Dank Air-Quality-Sensoren Der Trotec TTK99 HEPA reguliert nicht nur die Luftfeuchtigkeit (30–80%), sondern reinigt die Luft auch gleichzeitig. Während man der Raumluft ihre Belastung durch Krankheitserreger oder Schimmelpilzsporen nicht ansieht, erkennt der TTK 99 HEPA, was Ihnen verborgen bleibt. Seine digitalen Feuchtesensoren messen fortlaufend die Raumluftfeuchte. Eine praktische, vorderseitige Farb-LED-Anzeige informiert Sie über die aktuelle Raumluftqualität: Blau: Zu trocken Grün: Optimal Rot: Zu feucht Effektive Entfeuchtung für grosse Räume Mit einer Entfeuchtungsleistung von bis zu 31 Litern pro Tag eignet sich der TTK99 HEPA ideal zur Trockenhaltung von Räumen bis zu 90 m² (230 m³), wie Kellern, Garagen, Archiven oder Waschküchen. Beachten Sie, dass das Betriebsgeräusch in ruhigen Wohn- oder Schlafzimmern deutlich wahrnehmbar sein kann. Hierfür empfehlen wir den leiseren Dryfix Royal 24 aus unserem Sortiment. Bei Bedarf unterstützt der TTK 99 HEPA auch die Wäschetrocknung erheblich: In leicht temperierten Räumen kann er 1-2 Waschmaschinenfüllungen pro Tag trocknen. Leistungsstarke Luftreinigung mit HEPA-Filter Das zweifache Filtersystem des TTK99 HEPA mit Vorfilter und Intensiv-Filter (EPA-Filter Klasse E11) entfernt bis zu 95% der Schadstoffe aus der Luft, darunter Viren, Bakterien, Schimmelpilzsporen, Pollen, Hausstaub und Allergene. Dies gewährleistet eine ausgezeichnete Reinigungswirkung. Besonders Allergiker schätzen, dass beim Wäschetrocknen herumfliegende Pollen vom Filter abgefangen werden und so nicht in Kleidung oder Bettwäsche gelangen. Komfort und Benutzerfreundlichkeit Hygrostatgesteuerte Automatik: Stellen Sie die gewünschte Luftfeuchtigkeit ein, den Rest erledigt das Gerät. Vier Betriebsmodi: Wählen Sie flexibel zwischen Automatik, Dauerbetrieb, Wäschetrocknung und Nachtmodus. 24-Stunden-Timer: Programmieren Sie Ein- und Ausschaltzeiten präzise in 1-Stundenschritten. Kindersicherung: Schützt die Einstellungen vor ungewollten Veränderungen. Auto-Restart-Funktion: Das Gerät startet nach einem Stromausfall automatisch neu mit den zuvor gewählten Einstellungen (Memory-Funktion). Vorteile des Trotec TTK99 HEPA auf einen Blick: Kombinierter Luftentfeuchter mit Intensiv-Luftreiniger (95% Filtration von Bakterien, Viren, Pollen, Feinstaub, Milben, Schimmelpilzsporen und Allergenen) Hygrostatgesteuerte Entfeuchtungsautomatik (30–80% r.F.) Geeignet für Räume bis 90 m² / 230 m³ Entfeuchtungsleistung: max. 31 Liter / 24 Stunden Luftqualitätsanzeige mit Farb-LED Anzeige der relativen Luftfeuchtigkeit Permanentmodus für Dauerbetrieb Timerfunktion (1–24 Stunden) Auto-Restart-Funktion (Memory-Funktion) Kindersicherung Überlaufschutz und Warnsignal bei vollem Wasserbehälter Wassertank: ca. 4 Liter Zweistufiges Gebläse Anschlussmöglichkeit für Ablaufschlauch Wäschetrocknungsfunktion Der Ventilator läuft nach Erreichen der Zielfeuchte 3 Minuten nach, um das Innere des Gerätes zu trocknen und so vor Schimmelbildung zu schützen. Lieferumfang TTK 99 HEPA Luftentfeuchter EPA Luftfilter (Kategorie E11) Vorfilter Schlauch für Kondensatablauf Trotec TTK99 HEPA: Technische Daten Entfeuchtungsleistung (30°C / 80% r.F.) 31 Liter / Tag Luftvolumen 170 m³/h Maximale Raumgrösse 90 m² (100 m³) Minimale Raumgrösse 4 m² Temperaturbereich 5 - 32°C Feuchtigkeitsbereich 35 - 100 % r.F. Stromspannung 220 - 240 V/50 Hz Nennstromaufnahme max. 3.38 A Leistungsaufnahme max. 720 W Empfohlene Absicherung 10 A Kabellänge ca. 1.8 m Stecker EU-Stecker mit Schweizer Fixadapter Kältemittel R290 (90g) GWP3 Wassereimer 4 Liter Betriebsgeräusch (1m / 2.5m Abstand) 51 dB(A) / 48 dB(A) Abmessungen (T x B x H) 250 x 370 x 585 mm Gewicht 17 kg Abtauautomatik Umluft, elektronisch Entfeuchtungsautomatik Hygrostatgesteuert Ventilator radial, 2 stufiges Gebläse Automatische Abschaltung bei vollem Eimer Ja Vorfilter Ja Timer Ja Dauerbetrieb möglich Ja Wäschetrocknungsmodus Ja Display Zeigt aktuelle/eingestellte Raumfeuchte Memory-Funktion Ja (speichert Einstellungen) Schlauchanschluss Ja, kurzes Schlauchstück im Lieferumfang Trotec Artikel. Nr. 1.120.000.103 Garantie 2 Jahre Dokumente / Downloads für den Trotec TTK99 HEPA Bedienungsanleitung Deutsch Bedienungsanleitung Französisch Bedienungsanleitung Italienisch

Learn more More Fewer

A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

This electronic moisture indicator allows for precise depth measurement of moisture in solid materials such as masonry, concrete walls, and floors up to a depth of 4 cm. This is particularly useful for quickly locating water damage after a pipe break or for easily monitoring the drying progress of subfloors. Thanks to the dielectric measurement method, moisture measurement is completely non-destructive, without the need to insert electrodes or probes into the material being measured. The reaction time is less than one second, so results are available almost immediately. At the push of a button, additional information such as minimum and maximum values can be displayed on the easily readable, backlit display. Furthermore, the device features a hold function, allowing the current measurement value to be easily retained.     Functions   • Minimal and Maximal Value Display• Hold Function• Illuminated Display• Automatic switch-off     Advantages at a Glance   • Fast and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Minimal value, maximal value, and hold function• Automatic function and battery test• Ready to use• Optimal price-performance ratio• Illuminated Display• Automatic switch-off    Scope of delivery   • Measuring device• Battery• User manual     Technical data   voltage 9V Battery Measuring range digits 100 Resolution and Accuracy 1 Digit Messprinzip dielectric / capacitive Penetration depth 5 - 40 mm (non-destructive) Ambient temperature 0 - +50 °C ambient air humidity 0 - 80 % r.F. Dimensions L x W x H 180 x 35 x 45 mm Weight 180g Trotec article no. 3.510.205.031 Guarantee 2 years  

Learn more More Fewer

High-quality floor fan made of robust metal and the rotors (45 cm diameter) made of aluminum. The fan head is vertically adjustable, allowing the airflow to be tilted in any desired direction. The device has three speed settings, a practical carrying handle, and a good price-performance ratio.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Large fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's airflow direction is continuously adjustable horizontally by 110°.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.50 m length• No assembly required, the fan is ready to use immediately.• RoHS and CE compliant• Suitable wall/ceiling mount available as an accessory  Technical data  Power consumption max. 100 Watts Rotordurchmesser 45 cm airflow Up to 5414 m³/h air speed max. 3.8 m/s Noise (our measurement)     1 m distance Step 1-3: 61-65 dB(A) 2.5 m distance step 1-3: 57-61 dB(A) speed levels 3 Revolutions Level 1 / 2 / 3:  900 / 1150 / 1300 per minute Cable length approx. 1.50 m Connection EU plug with suitable fixed adapter for Switzerland (230V) Dimensions ( W x H x D ) 540 x 535 x 180 mm Weight 4.5 kg Trotec article no. 1.510.006.031 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A good air conditioner for cooling bedrooms, living rooms, or offices. Simply set your desired temperature in the range of 16°C to 31°C, and the device will automatically cool the room air to the set value. The extracted heat is expelled through an exhaust hose out of the window.  comfort functions With remote control, 24-hour timer, and automatic mode, this model offers you convenient control from your seat, pre-planned on or off switching, as well as self-cooling depending on the room temperature.  Ventilator function – with and without cooling Pure ventilation operation is also possible: a two-stage adjustable fan blower provides fresh air and gentle air circulation in the room with an air volume of up to 320 m³/h – even without activating the cooling compressor. The direction of the airflow can be manually adjusted with the horizontal air deflection flaps, so that the fresh breeze arrives exactly where you want it. In addition, the integrated air filter on the back of the unit filters lint, dust flakes, and pet hair from the room air – an advantage not only for allergy sufferers.  Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 0.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold formation. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal collection container for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.  Mobile and flexible instead of drilling and plugging If you want to place the device in another room, it can be easily moved from one place to another with its smooth-rolling transport wheels. Unlike permanently installed air conditioning units, you can always use a mobile air conditioner exactly where cooling is needed – without drilling, screwing, or plugging. You just need to secure the exhaust hose included in the delivery in a window or door opening, and you can start cooling the room. "To prevent warm outside air from entering the room to be cooled through the slightly opened windows or doors, we offer window and door seals as optional accessories. This way, you can cool even more efficiently."  Tip for restful sleep If you want to fall asleep on warm summer nights with gentle cooling, you can set a timer to have the air conditioning unit turn off by itself after a while to prevent your body from getting too cold during the night.  Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.  Advantages at a Glance • Suitable for rooms up to 24 m² / 60 m³• Energy efficiency class A• 2.6 kW cooling capacity• 3 operating modes: cooling, ventilation, dehumidification• 2 ventilation levels• Adjustable air outlet direction• Target value preselection in the range of 16°C to 31°C• Energy-saving operation through automatic switching off/on upon reaching/exceeding the target value• 24-hour timer• Remote control + intuitive LED display• Removable air filter against pet hair, lint, dust flakes• Quiet operation • Environmentally friendly refrigerant R290• Mobile air conditioners - Comfortable cooling machines  Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."  Technical data  cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size   max. 24 m² or 60 m³ Room size specification manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.5 A Recommended Coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, Length 1.5 m Masse (H x B x T) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1.210.002.022 guarantee 2 years  

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer

Die Windmaschine TTW 25000 S  Für alle Belüftungsaufgaben in Produktionsumgebungen, Landwirtschaft oder Lagerbereichen, wo hohe Luftwechselraten auch mit wenig Investitionsaufwand realisierbar sein sollen, ist die Windmaschine TTW 25000 S eine optimale Wahl. Sie ist bei Bedarf auch in der noch kräftigeren Ausführung "TTW 35000S" erhältlich. Hohe Luftleistung und robuste Bauweise Aufgrund der zweistufig regelbaren Luftleistung von bis zu 27'600 m³/h können mit diesem robusten Trommelventilator die erforderlichen Luftwechselraten auch in großen Räumen oder Hallen erreicht werden. Das galvanisierte Stahlgehäuse ist dank Fahrrahmen einfach transportierbar und trägt eine neigbare Ventilatortrommel zur variablen Ausrichtung der Windmaschine bis auf eine senkrechte Strömungsposition. Auf diese Weise lässt sich der Luftstrom gezielt auch an hohe Wand- oder Deckenbereiche lenken, was die Windmaschine TTW 25000 S auch zur flexibel einsetzbaren Lösung bei Effektbelüftungen für Bühne, Film- und Fotosets macht. Vorteile für die Praxis Budgetschonende Option für semiprofessionelle Belüftungsanwendungen Luftumwälzungskapazität bis 27'600 m³/h Steckerfertiges Gerät mit einfacher Handhabung Justierbarer Neigungswinkel der Strömungsrichtung von horizontaler bis senkrechter Position Flexibler Ortswechsel durch Fahrwagenkonstruktion Technische Daten Trotec Artikel-Nr. 1510004020 Dimensionen und Gewicht Tiefe ohne Verpackung 525 mm Tiefe mit Verpackung 395 mm Breite ohne Verpackung 1090 mm Breite mit Verpackung 900 mm Höhe ohne Verpackung 1140 mm Höhe mit Verpackung 1150 mm Gewicht ohne Verpackung 44 kg Gewicht inklusive Verpackung 49 kg Technische Spezifikationen Gebläsestufen 2 Max. Fördermitteltemperatur 40 °C Wurfweite (Innenräume) 8 m Luftmenge und -druck Luftmenge Stufe 1 21'000 m³/h Luftmenge Stufe 2 27'600 m³/h Max. Luftmenge (Typ) 27'600 m³/h (frei ausblasend) Max. Luftdruck 160 Pa Energie und Elektrik Nennstromaufnahme 2.8 A Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme gesamt 650 W Leistungsaufnahme Stufe 1 0.52 kW Leistungsaufnahme Stufe 2 0.65 kW Empfohlene Absicherung/Vorsicherung 16 A Kabellänge 2.3 m Anschlussstecker (Bezeichnung) CEE 7/7 mit Schweizer Fixadapter Akustische Daten Schallpegel Stufe 1 (Abstand 1m) 65 dB(A) Schallpegel Stufe 2 (Abstand 1m) 75 dB(A) Ausführung und Mobilität Lüfterflügel-Material Metall Ventilatortyp axial Luftstrom ausblasend Gehäuseausführung Metall Mobilität fahrbar (Stapler, gummibereifte Metallräder) Garantie 2 Jahre

Learn more More Fewer

The DH25 is a powerful dehumidifier that is ideal for medium-sized rooms and environments with high humidity levels. It impresses with its reliable dehumidification performance in both cool and temperate spaces. As an evolution of the FDK44 model, it offers digital control and a slightly increased dehumidification capacity.OperationOperation is incredibly simple: The desired target humidity is set on the control panel. If the measured humidity exceeds the set value, the dehumidifier automatically starts operating; otherwise, it pauses. The display always shows the current room humidity. The DH25 unleashes its full dehumidification power especially for year-round drying of single or double garages, archives, basements, or for stabilizing humidity in laundry and drying rooms. Thanks to its highly advanced hot gas defrosting, the DH25 can be used down to just above freezing point. Its efficient dehumidification performance in low humidity ranges, where other dehumidifiers can no longer extract moisture from the air, is particularly noteworthy. The room air is drawn in from one side of the housing and cleaned through an industrial, reusable filter. The dried air is blown into the room from the opposite side, creating effective air circulation. The setup of the DH25 is flexible: it can be placed both on the floor and on a free shelf, with the wheels being lockable for a secure stand. The condensate is drained directly via a hose connection. It is important that the hose has a constant slope towards the drain to ensure smooth drainage. The DH25 is characterized by its solid and high-quality construction. The housing is made of white powder-coated metal, while the internal components meet professional standards. This allows for uninterrupted continuous operation without supervision. Even after a power failure, the dehumidifier resumes operation with the previous settings, making it ideal for use with timers or smart home systems. For easy mobility, the DH25 is equipped with four sturdy wheels (with brakes) and two foldable carrying handles. Versatile application• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for continuous dehumidification of tempered but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +35°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 40 liters20°C/80% r.H.: 16 Liters20°C/60% r.H.: 12 Liters10°C/60% r.H.: 7 Liters(r.H.=relative humidity)   Optional accessoriesThe delivery includes the ready-to-plug-in device. If needed, we offer various suitable accessories, such as:• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped away to a higher location)Stronger designThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Trotec DH25S Tension: 230V / 50Hz Power consumption:  max. 700W / 510W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 1 m distance 53 dB(A)2.5 m distance 51 dB(A) Dehumidification capacity: 40 liters/day (30°C / 80% r.H.)  Air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) Condensation tank: No tank / only hose connection possible Compressor:     Rotary compressor  Refrigerant:   R290 (152gr.) Dimensions (L/H/D):      580 x 455 x 350 mm (including wheels and carrying handles) Weight:    30 Kg Business closure: Digital Ambient temperature: 1°C ~ 35°C  Area of application: up to 100m² Swiss plug:  EU plug with Swiss fixed adapter, 5m cable Hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

This handy floor fan, made of sturdy metal with aluminum rotors (30 cm diameter), offers a flexible and powerful solution for a variety of applications. The fan head can be tilted vertically by 100°, allowing the airflow to be directed precisely in any desired direction. With three speed settings, a practical carrying handle, and an excellent price-performance ratio, this fan is an ideal choice for everyday use. The use of a copper coil ensures a long lifespan and reliable operation. The fan is excellent for supporting drying after water damage or for effective air circulation in any rooms. Thanks to its high reliability, it is also suitable for unattended continuous operation.Characteristics• Fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's airflow direction is continuously adjustable horizontally by 100°.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance motor with copper coil• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.50 m in length• No assembly required, the fan is ready to use immediately.• RoHS and CE compliant • Suitable wall/ceiling mount available as an accessory   Technical data  Power consumption max. 37 Watts Rotordurchmesser 30 cm Airflow Up to 3019 m³/h noise 1 m distance: max. 58 dB(A)2.5 m distance max. 55 dB(A) speed levels 3 Revolutions Level 1 / 2 / 3:  950 / 1100 / 1250 per minute Cable length approx. 1.50 m Connection EU plug with suitable fixed adapter for Switzerland (230V) Dimensions ( W x H x D ) 395 x 375 x 185 mm Weight 2.8 kg Trotec article no. 1.510.006.011 Guarantee 2 years Documents / Downloads   Operating Instructions German  User manual French  User manual Italian  User manual English

Learn more More Fewer

Ideal for venting the moist warm air from 2-hose air conditioning units. The exhaust hoses are installed in 99% of all cases at an open window."Without an intelligent window installation, such a solution operates extremely inefficiently, as warm outside air continuously flows back in through the window opening, partially negating the cooling performance of the air conditioning unit. In other words: Your mobile air conditioner must not only cool the warm indoor air but also the incoming outside air. This clever sealing fabric significantly increases energy efficiency." This practical helper can be attached to any type of window with just a few simple steps and reliably prevents the backflow of warm outside air into the air-conditioned interior, as well as the intrusion of insects. When installed correctly, the window can be closed as usual without having to remove the fabric. The translucent fabric is made from a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The acquisition costs have already paid off in a very short time.  Easy construction  The sealing cloth is attached using the included Velcro tape, which can be removed at any time, similar to mosquito nets. Cleaning in the washing machine is also easily possible.  Suitable for air conditioning units with dual hose technology Air conditioning units with dual hose technology operate with two separate air paths. Commercially available window seals usually only have a zipper opening and are therefore not suitable for use with dual hose devices. This "Airlock" has two openings, allowing for the variable attachment of one "or" two exhaust hoses. If only one opening is needed, the zipper closes the second one invisibly and airtight.  Maximum circulation 560 cm The sum of the three open sides must not exceed 560 cm for this model. This is usually sufficient to also encompass tilted balcony doors. For standard-sized windows, please also consider the model "Airlock200."  Advantages at a Glance • Increases cooling performance, reduces energy consumption• Suitable for large casement windows, large tilt windows, and tilted balcony doors • For air conditioning units with single hose and dual hose technology• Prevents the intrusion of warm air and insects• The window can be closed despite the window sealing.• Amortizes in no time at all• Easy self-assembly  Trotec Article No. 6.100.002.004

Learn more More Fewer

"Striking in technical features, modest in price: The dehumidifier with built-in condensate pump."     Comfort function: Temperature-dependent air dehumidification   "For an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended for use in rooms with temperature fluctuations throughout the day or year. If the room temperature changes, the dehumidifier automatically adjusts its dehumidification performance."     Effective and simple   The device also naturally features a hygrostat-controlled dehumidification automation. A fixed air humidity value is selected, which should not be exceeded. The adjustable range is between 35 and 85% relative humidity, in 5% increments. If the value is exceeded, the dehumidifier automatically activates and switches off by itself in an energy-saving manner as soon as the desired target value is reached.     Gentle laundry drying with dehumidifiers   "In addition to dehumidifying the room air, the dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumbler. The laundry drying function is comparable to traditional air drying outdoors."   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, with significantly less energy consumption. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns. In contrast to pure air drying, the laundry becomes softer and more pleasant to wear against the skin because the garments move in the gentle breeze of the dryer during the drying process.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Convincing Features   The timer function, a fill level warning light for a full water tank, the overflow protection with automatic shut-off, and a laundry drying mode complete the comfort features of this TTK dehumidifier. In addition, the integrated, washable air filter allows for additional air purification by extracting dust or pet hair. Thanks to its wheels and practical carrying handles, the device is also well-prepared for flexible relocation. The operation is easy and low-maintenance due to its comfortable features.     Bucket, direct hose connection and integrated condensate pump   The water that is extracted from the air is collected in a standard 6-liter bucket. A float switch automatically stops the operation when the bucket is full. Alternatively, the water can also be directed through a hose to a lower drainage point. If no floor drain is available, the water can be pumped up to 4 meters high using the built-in pump in the device, for example into a sink, out of a basement window, or even one floor up. Direct drainage is particularly convenient in unattended operation, as it eliminates the need to empty the bucket (hobby rooms, holiday apartments, drying of water damage, etc.).    The integrated pump is not suitable for continuous operation.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Advantages at a Glance • Hygrostat-controlled dehumidification automation with selectable target value between 35 and 85 % r.H. in 5 % steps• Comfort operation for temperature-dependent automatic control of humidity• Overflow protection with automatic shutdown when the bucket is full • Level warning light when water tank is full• Connection for external condensate drainage with integrated condensate pump• Pump-out function for faster condensate drainage• Optional fully automatic or continuous operation• Easily readable, illuminated display• Display of relative humidity• Laundry drying function• Timer Function• 2 fan speeds • Cable winding     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 47 liters / day air volume 375 m³/ h Maximum room size 120 m² (100 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C moisture range 35 - 100 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 5.4 A Power consumption max. 1060W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss fixed adapter refrigerant R290 (145g) GWP3 water bucket 6 Liter Pump integrated, lifting height up to 4 m operating noise 50 dB(A) at 1 m distance47 dB(A) at a distance of 2.5 m Dimensions L x W x H 282 x 392 x 616 mm Weight 19.5 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

This heater is characterized by its effective and rapid heat output, making it ideal as an additional heater for apartments or for general heating of poorly insulated rooms during the cool season. With a heating power of 2000 watts, it ensures pleasant comfort temperatures in rooms up to 24 m² or 60 m³. Whether in the living room, bedroom, children's room, in the holiday apartment, in the hobby cellar, party room, office, sales room, or conservatory – this heater creates a cozy atmosphere everywhere.     Perfect combination of convection heat and infrared radiation   Unlike many other heating devices or heaters, the heat from this heat wave heater is not only emitted from one direction into the room. Instead, the combination of convection heating and mica infrared heating elements ensures that the heating is felt all around. Furthermore, the heating elements heat up particularly quickly, so that the heat output is noticeable within just a few seconds. It is best to place the device in the middle of the room so that you can benefit from the even and rapid 3D heat distribution. Further down, you will learn more about the operating principle of the heat wave heater.     Thermostat control for high comfort and low energy consumption   With the remote control and the intuitive membrane button control panel, you can quickly and easily select 2 heating levels (1200 watts and 2000 watts). The current room temperature is always displayed on the LCD screen.   You can optimally adjust the heating power to your room temperature thanks to an intelligent temperature control via thermostat. Simply enter your desired target room temperature in the range of 15 °C to 35 °C. The heating will warm the room until the selected temperature is reached and then automatically switch off. As soon as additional heating is required, the operation will automatically restart, ensuring that the room temperature is kept constant. This process is particularly efficient and energy-saving because only as much heating is provided as necessary to ensure a pleasant feeling of warmth.     Quiet and dust-free warmth   This model operates without a fan blower, unlike electric heaters, and therefore does not stir up any dust in the room. This is particularly pleasant not only for allergy sufferers and asthmatics. Additionally, it generates its heat completely silently, making it suitable for use in the bedroom, for example. This way, you can sleep comfortably and restfully even in rooms that have become very cold, such as when you spend the first night in a holiday home that has not been used for a long time.     Timer function – programmable on and off switching   Equally comfortable and energy-saving is the practical 24-hour timer of the comfort heater. If desired, the device can be automatically turned on or off after a set time (1-24 hours). For example, you can set it so that the heater in the bedroom turns off by itself after you have fallen asleep. Or you can preheat the kitchen in the morning so that you can enjoy your coffee in warmth.     Lots of security   "For safe heating operation, the heat wave heater is equipped with an overheating protection that automatically switches off the device when there is a risk of overheating. It is also well protected against accidental tipping, e.g. by pets, careless guests, or rambunctious children, as the integrated tilt switch immediately deactivates the operation in case of an incline."     How do these infrared heaters work?   The 3D heating system of this heater cleverly combines the advantages of a convector and an infrared heater, providing real all-around warmth in no time:    Efficient Mica Heating Technology with Mica Plates: The 3-layer mica heating plates made from natural mica ore generate a pleasant infrared radiant heat in no time, which, unlike conventional heaters, is emitted not only from one direction but simultaneously forwards and backwards. Another advantage of the high-quality mica heating elements is their full-surface and uniform heating. The intense radiant heat is generated over the entire surface, without loss of power and without consuming oxygen. Additionally, warm air also rises from the hot mica heating elements. This creates a gentle airflow that further distributes the heat throughout the entire room. This principle is called convection.   Space-filling warmth based on the principle of the sun: Infrared radiation works according to the natural principle of the sun. It does not heat the air, but rather the surfaces of the objects it encounters. The objects store the heat and gradually release it back into the room, so that the warmth continues to linger even after the infrared heater has been turned off. On the skin, infrared radiation creates the pleasant sensation of natural sun warmth.   Advantages: The soothing warmth takes effect immediately and without any warm-up time throughout the entire room and does not need to be transported by the circulating room air. Together, the infrared radiation and convection heat complement each other to create a three-dimensional all-around heating system. The heat radiated upwards, forwards, and backwards uniformly warms the entire room. For quick comfort warmth throughout the room – even into the farthest corner.     Healthy indoor climate Breathe Healthy with the Stop-DryAir Function: U You no longer have to worry about dry heating air. Unlike conventional heating techniques, where heating inevitably leads to a decrease in room air humidity, the heat wave heating principle keeps the existing air humidity in the room to be heated constant at the same level.   Especially during the cold autumn and winter months, cool temperatures are perceived as uncomfortable by the body. Then, the infrared heat settles on the skin like a soothing heat plaster. The circulation and metabolism are stimulated, which can in turn have a relieving effect on muscle pain and the musculoskeletal system.     Striking black design "The optics also play a big role, after all, the cool black infrared heater often takes center stage in your room. The high-quality workmanship and the robust retro charm of the black metal grid set a striking design accent in your room ambiance."     Rollbar, compact and easy to transport   Thanks to its compact dimensions, integrated smooth-running wheels, and practical handles, the heater can be quickly and easily moved or carried from one room to another. This keeps you flexible, allowing you to use it in the office, in living and commercial spaces, or for example in wellness areas. The integrated cable management ensures order during transport and storage, preventing tripping hazards.     Advantages at a Glance   • Up to 2,000 W heating power for clean, condensation-free, and odorless warmth• 2 heating levels (1200 W / 2000 W)• 3D Surround Heating System: Combination of infrared radiation and convection heat• High-quality mica heating technology with mica plates• Thermostat-controlled automatic operation with target value selection between 15 °C and 35 °C• Automatic temperature control• Current room temperature display• Stop-DryAir: no drying out of the room air• Timer Function• IR remote control• LCD-Display• Energy-efficient operation thanks to automatic shutdown upon target value achievement• Maximum safety thanks to overheating and tilt protection• Easy transport through handles and integrated wheels• Silent heating Please note: The device is only suitable for use in well-insulated rooms or for occasional use.     Technical data   Heating output 1200W / 2000W Heizart Convection and Infrared Heat Waves Maximum room size 24 m² (60 m³) Temperature range 15 - 35 °C voltage 220 - 240 V/50 Hz Nominal current consumption max. 8.7 A Power consumption max. 2000W Recommended Coverage 10 A Cable length approx. 1.2 m Plug EU plug with Swiss adapter Dimensions W x H x D 640 x 660 x 260 mm (including stand feet) Weight 5 kg Protection class IPX0 On/off switch yes, plus step switch 1200W - 2000W Thermostat control and LC-Display and Frost Watch Function no Automatic shutdown at target value and Parental controls no Timer yes (1-24 hours) Memory function yes (values are saved, operation on timer possible) Anti-tip protection and Overheating protection and Guarantee 2 years

Learn more More Fewer

The large area humidifier B400 is a powerful cold evaporator with air washing function. It is comparatively quiet and compactly built, ensuring good humidity in dry living rooms, overheated offices, as well as storage rooms and workshops up to 250 m².Functional principleA humidification mat is pulled through the water bath by a wheel and absorbs moisture. This creates a moisture buildup in the device, which is released into the room air by a two-stage adjustable fan. This method is very effective in humidification performance, while particles in the air are captured on the humidification mat and deposited in the water bath. The air humidifier thus also cleans the air of airborne particles such as dust and pollen.serviceThe operation is incredibly simple. The humidifier has only two rotary switches:Operating switch: three-stage - OFF, fan level 1 or fan level 2Hygrostat switch: for stepless regulation of the desired target humidityTwo lights also indicate when the device is in operation and when the water tank is empty.The humidifier has a metal housing (white powder-coated), stands on 4 wheels, and is easy to move.VentilationThe ventilation is two-stage, the maximum air output is 500 m³, the operating noise is good on level 2, and only minimally perceptible on level 1. The three ventilation grilles at the air outlet can be easily adjusted either forward or backward.Consumables and MaintenanceThe water bath (pull-out drawer) serves to provide the necessary moisture on one hand, but on the other hand, it also collects the dirt that is removed from the air. Therefore, it should be completely emptied and cleaned once a week. The humidification wheel is clicked into the holder from above and can be easily removed for cleaning; the degree of contamination and thus the necessity for cleaning is visible from above.As with all evaporative coolers, it is also advisable to disinfect the water in the B400 to prevent germs and bacteria. For this purpose, the silver cubes (Ionic Silver Sticks) are suitable, which are available as consumables from us. The silver cubes should be replaced once per season; otherwise, no consumables are required for this device.scope of delivery• ready-to-use device  Technical data  Tension 230V/50Hz consumption max. fan speed 1 fan speed 2 Standby 53 Watt 31 Watt 45 Watt 0 operating noise (at a distance of 2.5m) Level 1: 44 dB(A) Level 2: 49 dB(A) circulating air level 2 500 m³/h humidification max. 60 liters / 24 h Room size max. 200 m² steering mechanically Weight 19 kg Mass (HxWxD) 74 x 63 x 34 cm guarantee  2 years

Learn more More Fewer

Der TDS 30 R ist ein professioneller 9-kW-Elektro-Heizlüfter für den Einsatz in anspruchsvollen Umgebungen wie Baustellen und Werkstätten. Funktionsweise und Anwendung Da das Gerät keinen Sauerstoff verbraucht und keine Verbrennungsabgase produziert, ist es optimal für Beheizungseinsätze in geschlossenen oder schlecht belüfteten Innenräumen geeignet. Diese Eigenschaften machen die Elektro-Heizkanone ideal zur Temperierung von kleineren bis mittelgrossen unbeheizten Innenräumen, darunter Werkstätten, Garagen, sowie Bereiche im Bauwesen, Schiffsbau, Landwirtschaft oder KFZ-Werkstätten. Regelung und Steuerung Die gewünschte Warmlufttemperatur lässt sich über das integrierte Thermostat stufenlos und bedarfsgerecht einstellen. Die Leistungsregulierung erfolgt über zwei Heizstufen. Zusätzlich steht eine separate Stufe für den reinen Ventilatorbetrieb ohne Heizfunktion zur Verfügung. Konstruktion und Mobilität Das Gehäuse des Elektroheizlüfters besteht aus vollverzinktem, lackiertem Stahlblech. Der robuste, ergonomische Tragegriff gewährleistet eine maximale Mobilität und einen einfachen Transport. Sicherheit  Der sichere Betrieb wird durch mehrere integrierte Schutzfunktionen gewährleistet. Die Bauweise ermöglicht die Erzeugung kondensfreier Wärme ohne Sauerstoffverbrauch. Vorteile Integriertes Thermostat für konstanten Warmluftstrom. Platzierung der Steuerung unterhalb der Heizung schützt vor Überhitzung und  verbessert die Zuverlässigkeit gegenüber anders gebauten Geräten. Kondensfreie Wärme – optimal zur Innenraumbeheizung. Sicherheit: Integrierter Überhitzungsschutz und Kippschutz. Langlebigkeit: Gebläsemotor mit Thermoschutz und Ventilator-Nachlauffunktion zum sicheren Herunterkühlen der Komponenten. Flexibilität: Ventilatorbetrieb auch ohne Heizfunktion möglich. Mögliche Einsatzgebiete Auto-Werkstatt Baustellen und Montageeinsätze Lager- und Arbeitshallen Gastronomie und Gewächshäuser Technische Daten Trotec-Artikelnr. 1410000003 Heizelement Edelstahl-Heizspirale Funktionsprinzip elektrisch Gehäuseausführung Metall Ventilatortyp axial Abmessungen und Gewicht Länge ohne Verpackung 275 mm Breite ohne Verpackung 220 mm Höhe ohne Verpackung 330 mm Gewicht ohne Verpackung 5 kg Gewicht inklusive Verpackung 5.5 kg Leistung und Energieversorgung Netzanschluss und -frequenz 400 V, 50 Hz Anschlussstecker CEE 16 A, 5-polig Nennstromaufnahme 7.22 A Leistungsaufnahme / Max. Heizleistung 5 kW (4.300 kcal/h) Empfohlene Absicherung 16 A Kabellänge 1.2 m Heizleistung und Luftmenge Stufen 1: Nur Ventilation (0.05 kW)2: Ventilation + Heizung (2.5 kW)3: Ventilation + Heizung (5 kW) Max. Luftmenge 580 m³/h Gebläsestufen 1 Max. Temperaturerhöhung (bei 1 m) 85 °C Betriebsbedingungen und Sicherheit Temperaturbereich min./max. -15 °C bis 25 °C Schallpegel (bei 1 m Abstand) 56 dB(A) IP Schutzart IP20 Sicherheitsfunktionen Auto-Restart-Funktion, Ventilator-Nachlauffunktion, Kippschutz Mobilität Trage-/Transportgriff(e) Garantie 2 Jahre

Learn more More Fewer

Diese vielseitige Infrarot-Standheizung ist die ideale Lösung, um Füsse und Beine unter einem Tisch warm zu halten – sei es im Freien, im Wintergarten oder am Arbeitsplatz. Die Tischplatte staut die Wärme effektiv, sodass sich im Beinbereich eine wohltuende, angenehme Temperatur sammelt. Auch neben oder innerhalb einer Sitzgruppe platziert, strahlt das Gerät seine Infrarotwärme gleichmässig und wohltuend auf Sitzhöhe ab. Dank der Infrarot-Technologie wird die Wärme sofort erzeugt, ganz ohne lange Aufwärmphase. Die Wärmeabgabe erfolgt gleichmässig rund um das Gerät (360°). Mit ihrem geringen Gewicht und dem praktischen Tragegriff lässt sich die Heizung schnell aufstellen oder verstauen. Sicher geschützt vor Regen und Staub Weder feuchte Witterung, plötzlicher Regen noch Staub können diesem robusten Standheizstrahler etwas anhaben. Das hochwertige Aluminium-Gehäuse ist nach Schutzklasse IP55 gegen Staubablagerungen sowie Spritz- und Strahlwasser geschützt und gewährleistet so Langlebigkeit und Zuverlässigkeit. Low Glare: Weniger Licht, mehr Atmosphäre Geniessen Sie und Ihre Gäste die Zeit im Freien blendungsfrei und ohne störendes Rotlicht. Der Strahler verfügt über eine langlebige Low-Glare-Infrarotröhre, die 80 % weniger Lichtabstrahlung bietet, ohne die hohe Wärmeeffizienz zu beeinträchtigen. Der reduzierte Rotlichtanteil schafft eine gemütliche Kerzenscheinatmosphäre – perfekt für kuschelig-warme Abende unter sternenklarem Himmel. Die hochwertige Carbon-Infrarotröhre erzeugt Wärme nach dem natürlichen Prinzip der Sonnenstrahlung. Dies geschieht besonders energieeffizient, da ein Grossteil der eingesetzten Energie direkt in Wärme umgewandelt wird. Nicht die Luft wird erwärmt, sondern Objekte und Personen in der direkten Umgebung nehmen die Strahlungswärme auf, speichern diese und geben sie als Sekundärstrahlung wieder an ihre Umgebung ab. Diese naturgetreue Wärmeverteilung ist geräuschlos und erfolgt ohne Staubaufwirbelung durch ein Gebläse, was besonders für Asthmatiker, Allergiker und Personen mit empfindlichen Atemwegen ein freies Durchatmen ermöglicht. Wärme geniessen ohne Berührungsängste Im Gegensatz zu anderen Heizlösungen bietet dieser Infrarotstrahler ein hohes Mass an Sicherheit. Ein engmaschiges Metallgitter schützt die Carbon-Infrarotheizröhre vor neugierigen Kinderfingern, unbeabsichtigten Berührungen mit Beinen oder Füssen und gewährleistet die Sicherheit von Haustieren. Zusätzlich reduziert eine hochwertige Veloursbeschichtung die Oberflächentemperatur des Schutzgitters, sodass selbst bei direkter Berührung keine unmittelbare Gefahr besteht. Stabil und standfest in jeder Situation Der tellerförmige Fuss (Ø 20 cm) sorgt für einen sicheren und stabilen Stand. Ein zusätzlicher Kippschutz wird durch die optimierte Gewichtsverteilung mit einem tiefen Geräteschwerpunkt geboten, wodurch ein Umkippen bei sachgemässem Gebrauch nahezu ausgeschlossen ist. Sollte der Standheizstrahler doch einmal unachtsam umgestossen werden, deaktiviert der integrierte Kipp-Abschalter das Gerät automatisch und sorgt so für maximale Sicherheit. Schnelle Inbetriebnahme Nach der einfachen und schnellen Montage des Standfußes muss diese Heizung nur noch aufgestellt und eingesteckt werden – und schon genießen Sie sofortige Wärme. Vorteile im Überblick Infrarotwärme ohne Vorheizen Gleichmässige Wärmeverteilung (360°) Heizleistung 1200 W Blendfreie Wärme dank hochwertiger Low Glare-Carbon-Infrarotröhre – ca. 5500 Leuchtstunden mit 80 % Lichtreduzierung Hochwertiges Aluminium-Design-Gehäuse Schutz vor Verbrennungen dank hochwertiger Velours-Beschichtung des Schutzgitters der Infrarot-Heizröhre Regensicher sowie gegen das Eindringen von Fremdkörpern geschützt, Schutzart IP55 Platzsparendes Säulendesign mit rundem Standfuss Passt perfekt unter den Tisch, um die Beine zu wärmen Saubere, kondens- und geruchlose Wärme – ganz ohne Lärm Keine Staubaufwirbelung, deshalb für Allergiker geeignet Im Gerät integrierter Kipp-Abschalter Energieeffiziente Umwandlung von Strom in Wärme Technische Daten Heizleistung 1200W Ein-/Ausschalter Ja, einstufig Heizart Kurzwellige Infrarot-Wärmewellen, Low Glare Röhren Wirkungsfläche ca. 5 m² Stromspannung 220 - 240 V/50 Hz Nennstromaufnahme max. 5.2 A Empfohlene Absicherung 10 A Kabellänge ca. 1.8 m Stecker EU-Stecker mit Schweizer Fixadapter Abmessungen B x H x T 200 x 650 x 200 mm (inkl. Standfuss) Gewicht 3 kg Schutzart IP55 (staub- und strahlwassergeschützt) Fernbedienung Nein LED-Display Nein Kindersicherung Kipp-Schutz, velourbeschichtete Oberfläche Timer Nein Trotec Artikel-Nr.: 1.410.003.908 Garantie 2 Jahre Produktvideo

Learn more More Fewer

Swiss version, suitable for three-pole 230V household sockets.  Quick and easy measurement of energy consumption "Which electrical device in the office or household consumes how much energy?" With a minimal possible power display of 0.1 W, this measuring device can track even the smallest energy wasters. This also allows for the detection of standby consumption in devices, meaning any potential consumption when turned off.  The application is incredibly simple: Plug the measuring device into the socket and connect the electrical consumer to be checked. You will immediately see its current energy consumption, optionally displayed as active power in watts, kWh, price, or costs per kWh.   Check your electrical devices using this measuring device, such as TV and HiFi systems, LCD televisions, amplifiers, DVD players, video recorders, computers, servers, refrigerators, freezers, washing machines, dryers, air conditioners, heaters, floor lamps, standing lamps, background and display lighting, machines, etc..  Advantages at a Glance  • Quick and easy measurement of energy requirements• Power consumption display in watts, kWh, or costs• Optimal price-performance ratio • Minimal possible power display 0.1 W • Puffer capacitor for storing the selected settings  • Display of standby consumption starting from 0.1 W - this is not possible with many competing products. • Display of the current power consumption of one or more devices • Display of the costs of the consumed energy within a specific period (electricity price must be recorded once)• Connection of a multiple socket with several devices possible• Easily readable and easy to understand LCD display  • Power failure protected• Swiss version - no conversion or adapter required  Technical data  Measuring range Total power consumption momentary current consumption  0.1 - 9999 kWh 0.1 - 2300 Watt (max. 10A) accuracy ± 2 % voltage / frequency 230V / 50-60 Hz (= household socket) Advertisement LCD memory yes, recording capacity 9999.9 hours. Messkreis category CAT II (2500V) Conformity / Safety EN 61010-1, EN 61326-1, Pollution Degree 2 Protection class IP20 Ambient temperature 5 - 40 °C ambient humidity max. 85 % r.F. Dimensions (H x W x D)  95 x 51 x 70 mm Weight 100 g Trotec article no. 3510205916 guarantee 2 years

Learn more More Fewer

The floor fan TVM 20 D quickly provides plenty of cooling with its quiet operation and is also visually a great favorite. Due to its distinctive design, the device is also called a drum fan and its matte black look of the rotor cage and stand bracket reminds of countless professional appearances of wind machines of this type in front of and behind the cameras of large photo and film studios. Optimal for ventilation, wind generation, wind cooling, or drying - the TVM 20 D is versatile.   Made of metal and with attention to detail   "Made entirely of robust metal down to the last chrome-plated wing tip and equipped with a copper coil in the motor, the floor fan is designed for an exceptionally long lifespan. The device blows away even the hottest stagnant air from living or office spaces with a high air throughput and a blade diameter of 20 inches (about 50 cm). Additionally, with 120 watts, it has sufficient power reserves to provide adequate cooling even at escalating temperatures." With its three speed levels, the TVM 20 D is perfectly equipped for any ventilation scenario: At the control element on the back of the metal grid basket, a gently cooling airflow can be adjusted just as easily as a stiff breeze. The rotor basket can be tilted continuously 360° around its horizontal axis, ensuring that the airflow always reaches exactly where it is welcome.   Secure stance with a small footprint   As a professional, the floor fan TVM 20 D requires little space and is always a welcome sight – whether at a photo shoot, in a restaurant, or with the practical wall and ceiling mounting at a party or concert. The device also easily withstands the occasional bump – thanks to three non-slip rubber feet attached to the bottom of the stand, which ensure the fan's stable position. The carrying handle at the back also makes the fan particularly easy to handle for transport to different locations.   Here are some practical advantages at a glance: 120 watts of power 3 speed levels Adjustable tilt angle of the fan head up to 360° Front and rear protected metal grill Fan blade diameter 50 cm Stable and non-slip base for a tilt-resistant stand Long lifespan thanks to the copper coil in the motor Smooth running Practical carrying handle Unique value for money Optional available: Wall and ceiling mount for ventilating hard-to-reach areas. Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A reliable wall-mounted dehumidifier with an appealing design. A durable, corrosion-protected construction made of powder-coated, galvanized steel sheet ensures maximum reliability for this industrial condensate dryer and makes it particularly resistant to environmental influences thanks to its protective-coated heat exchanger. The combination of high efficiency and low-maintenance design makes the dryer ideally suited for fully automatic, hygrostat-controlled continuous drying applications in numerous fields of use, and thanks to its autonomous recirculation operation, it can also be easily integrated into any application environment afterwards. With its KTL-coated heat exchanger, it is also extremely resistant to environmental influences even in particularly reactive air environments with high salt, chlorine, or solvent content.    Hygrostat controlled and protection against manipulation The built-in hygrostat automatically regulates the humidity to an optimal level, where condensation, mold, or corrosion have no chance. The target humidity can be freely adjusted according to your needs. High efficiency is ensured by the quiet-running AC axial fan and the powerful compression refrigeration system.  The dry air supplied to the room is simultaneously heated for process technology, so that the use of conventional heating and ventilation energy can be reduced.     Thanks to high-quality hot gas automation, the dryer requires only very short defrosting phases. This is optimal, especially for dehumidifying unheated rooms, as it improves the performance and increases efficiency.  The controls are protected against unauthorized access, making this industrial dryer also the ideal dehumidifier for public buildings, staff and changing rooms, or museums.    Wide range of applications In wall operation, the device can be used for a variety of applications, for example:  • Humidity control in staff rooms, changing rooms, lounges, and break rooms• Drying of changing rooms, gyms, bike and ski cellars• Constant humidity conditions in garages, workshops, test benches, or production halls• Dehumidification in archives, collections, or libraries• Dehumidification of water engineering facilities and pumping stations to prevent condensate formation on pipes or pumps• Humidity control during the storage of natural products, for example for quality assurance in wood storage or during the storage of raw tobacco.• Corrosion prevention in electrical switchgear, boiler systems, turbines, and piping systems in power plants or during the storage of raw bodies and metal components.• Humidity control in data centers, control rooms, etc.• Moisture control in the food industry, for example in cheese production or confectionery manufacturing Due to the horizontally directed recirculation airflow and its compact design, the plug-and-play dehumidifier is particularly well suited for installation above door areas.  The condensate drawn from the air is directly drained through a downward laid hose. If the water needs to be drained to higher areas, please also consider our pump kits.  Advantages at a Glance • Professional quality, made in Germany• High dehumidification performance even at low temperatures• Corrosion-protected construction• Fully automatic operation• Professional hot gas defrosting automatic system• Quiet AC axial fan for horizontal recirculation airflow• Optimal suited for installation above door areas• Control elements installed protected from unauthorized access• Available optionally with condensate pump  Technical data  dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H.   11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C Moisture range technical  Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 657W Recommended Coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in the delivery operating noise   53 dB(A) at 1 m distance 49 dB(A) at a distance of 3 m Masse (B x H x T) 840 x 330 x 365 mm Weight 37 kg defrosting automatic Heissgas dehumidification automation mechanical hygrostat wheel, stepless Ventilator axial, single-stage blower prefilter and operating hour meter no Continuous operation possible and Display no memory function yes (set values remain mechanically fixed) Trotec article no. 1.125.000.111 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer