The Dryfix "HotAirStopper" and "HotAirStopper XL" are practical accessories for mobile air conditioning units. They simply and reliably seal the window opening required for the passage of the exhaust hose from mobile air conditioning units. This window seal prevents heat from outside on one hand, and the expelled warm air from the air conditioning unit itself from flowing back into the room on the other hand. As a side effect, it keeps mosquitoes and other unwanted insects away. Ultimately, the solution also saves energy: the efficiency of the air conditioning unit is significantly increased because the heat load in the room is reduced.Function principle and assemblyThe Dryfix "HotAirStopper" consists of a roll of hook-and-loop tape that is adhesive on one side, as well as a cloth made of durable special fabric. Incorporated into the cloth is a zipper with two opposing zippers, which allows the exhaust hose to be fixed at the appropriate height from both sides in the window opening. The installation is comparably simple, like attaching a mosquito net: the hook-and-loop strip is glued along the three open sides of the window itself and the window frame. The cloth can then be easily attached with the hook-and-loop. A corresponding installation manual is included in the delivery. By the way, the windows can still be closed even when the cloth is mounted. Ideally, the cloth should not be stretched too tightly over the corners. Calculation window cycleThe standard version fits all common casement or tilt windows, whose three open sides do not exceed a total measurement of 400 cm. Only with us can you also get an XL version for a total measurement of 600 cm (surcharge +CHF 10.-) while supplies last.Calculation of total mass, example tilt window: (2 x window height) + (1 x width)Calculation of total mass, example wing window: (1 x window height) + (2 x width)Advantages and Features• Easy assembly with Velcro tape• Lower room temperature possible• more pleasant sleep without mosquitoes• No ingress of exhaust air and moisture• Window can be opened and closed• Energy-saving and water-repellent• Also suitable for roof windows that can be opened on one side (not for roof windows that rotate around an axis)   questions and answersWhich windows does the system work on?For all common tilt-and-turn windows in old and new buildings, as well as for installable skylights. Ideal are plastic or metal windows. With older, painted wooden windows, some paint may come off when removing the adhesive tape (similar to a mosquito net).  Can I also use the system on my balcony door?Yes. If you open the door as a wing, the standard version is sufficient. If the balcony door is tilted, the XL version fits.Is the cloth machine washable?Yes, up to 40°, e.g. wash program "easy care"   Which air conditioning/extraction devices is the system compatible with?With all devices that have a flexible exhaust hose, also with the mobile split air conditioning units "Ulisse" from our range.

Learn more More Fewer

Ideal for venting the moist warm air from 2-hose air conditioning units. The exhaust hoses are installed in 99% of all cases at an open window."Without an intelligent window installation, such a solution operates extremely inefficiently, as warm outside air continuously flows back in through the window opening, partially negating the cooling performance of the air conditioning unit. In other words: Your mobile air conditioner must not only cool the warm indoor air but also the incoming outside air. This clever sealing fabric significantly increases energy efficiency." This practical helper can be attached to any type of window with just a few simple steps and reliably prevents the backflow of warm outside air into the air-conditioned interior, as well as the intrusion of insects. When installed correctly, the window can be closed as usual without having to remove the fabric. The translucent fabric is made from a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The acquisition costs have already paid off in a very short time.  Easy construction  The sealing cloth is attached using the included Velcro tape, which can be removed at any time, similar to mosquito nets. Cleaning in the washing machine is also easily possible.  Suitable for air conditioning units with dual hose technology Air conditioning units with dual hose technology operate with two separate air paths. Commercially available window seals usually only have a zipper opening and are therefore not suitable for use with dual hose devices. This "Airlock" has two openings, allowing for the variable attachment of one "or" two exhaust hoses. If only one opening is needed, the zipper closes the second one invisibly and airtight.  Maximum circulation 400 cm The sum of the three open sides must not exceed 400 cm for this model. If you need a longer cloth, please also consider the model "Airlock1000".  Advantages at a Glance • Increases cooling performance, reduces energy consumption• Suitable for casement windows, tilt windows, and roof windows (must open on one side, do not rotate over the axis) • For air conditioning units with single hose and dual hose technology• Prevents the intrusion of warm air and insects• The window can be closed despite the window sealing.• Amortizes in no time at all• Easy self-assembly  Trotec Article No. 6.100.002.002

Learn more More Fewer

Ideal for venting the moist warm air from 2-hose air conditioning units. The exhaust hoses are installed in 99% of all cases at an open window."Without an intelligent window installation, such a solution operates extremely inefficiently, as warm outside air continuously flows back in through the window opening, partially negating the cooling performance of the air conditioning unit. In other words: Your mobile air conditioner must not only cool the warm indoor air but also the incoming outside air. This clever sealing fabric significantly increases energy efficiency." This practical helper can be attached to any type of window with just a few simple steps and reliably prevents the backflow of warm outside air into the air-conditioned interior, as well as the intrusion of insects. When installed correctly, the window can be closed as usual without having to remove the fabric. The translucent fabric is made from a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The acquisition costs have already paid off in a very short time.  Easy construction  The sealing cloth is attached using the included Velcro tape, which can be removed at any time, similar to mosquito nets. Cleaning in the washing machine is also easily possible.  Suitable for air conditioning units with dual hose technology Air conditioning units with dual hose technology operate with two separate air paths. Commercially available window seals usually only have a zipper opening and are therefore not suitable for use with dual hose devices. This "Airlock" has two openings, allowing for the variable attachment of one "or" two exhaust hoses. If only one opening is needed, the zipper closes the second one invisibly and airtight.  Maximum circulation 560 cm The sum of the three open sides must not exceed 560 cm for this model. This is usually sufficient to also encompass tilted balcony doors. For standard-sized windows, please also consider the model "Airlock200."  Advantages at a Glance • Increases cooling performance, reduces energy consumption• Suitable for large casement windows, large tilt windows, and tilted balcony doors • For air conditioning units with single hose and dual hose technology• Prevents the intrusion of warm air and insects• The window can be closed despite the window sealing.• Amortizes in no time at all• Easy self-assembly  Trotec Article No. 6.100.002.004

Learn more More Fewer

  A well-thought-out, powerful air conditioner for cooling living rooms and bedrooms. It features easy operation either on the unit itself or via remote control. The exhaust air is directed out of the room using the included hose, e.g., through the window or balcony door. Energy class A. Powerful blower, with adjustable louvers the direction of the cold air can still be easily controlled.   Execution / Scope of delivery• Plastic housing white/anthracite• Operator panel with display of the desired temperature and the current room temperature• 4 The Role• Remote control• Extendable exhaust hose approx. 1.40m (this model does not come with a narrowing attachment for tilt windows)• Cable approx. 1.50 m with Swiss plug (standard socket 230V / three-pole)• Operating instructions in German + French   Once the target temperature is reached, the device interrupts cooling (the ventilation continues to run as with most air conditioning units) and automatically turns back on when the room air warms up again (selectable range: 18-32°C). The air conditioning unit can be limited in operating time with the timer between 1 - 24 hours, but can also be programmed 1-24 hours into the future, so that it automatically turns on, for example, 1 hour before your return or before going to sleep. No memory function, meaning that after a power interruption, the device must be restarted, therefore not suitable for operation with a timer. extra cooling"A side-inserted compartment can be filled with water, which cools the expelled air by about 2°C again. This brings a welcome performance increase during the warmest season."Storage compartment for accessoriesThe hose and the included accessories can be conveniently supplied from above into the device itself in a specially prepared compartment. "As with all mobile air conditioning units, the ventilation and motor are also clearly audible in this model, although the overall noise level has been noticeably reduced compared to earlier mobile air conditioners in this performance class."Not suitable for year-round cooling of server rooms.      Technical data  Features Cool, dehumidify, ventilate Energy class TO cooling capacity 3200 W / 11000 BTU/h consumption cooling mode 1230 W Suitable for rooms up to 28 m² air volume max. 350m³/h Ventilator 3-stage Selectable temperature range 18 - 32° C Ø exhaust hose inside/outside 132 / 142mm (Length 140 cm) refrigerant R290  power connection 230V / 50 Hz shipping weight 31 kg Masse (H x B x T) 744 x 485 x 313 mm noise level (our measurement) 1.0 m distance fan level 1/3: 56 / 58 dB(A) 2.5 m distance fan stage 1/3: 53 / 54 dB(A) guarantee 2 years

Learn more More Fewer

Quick cooling and comfortable room climate at an affordable price. This 3-in-1 air conditioner offers efficient cooling for offices and rooms up to 20 m², making work more pleasant. In addition to the pure cooling operation, there is also a dehumidification and ventilation function.   When the preset target temperature (continuously adjustable between 17-35 °C) is reached, the integrated thermostat completely switches off the compressor in the unit. Compared to conventional designs, the air conditioning unit allows for an extremely economical cooling operation in this way. Of course, the compressor is automatically activated again when the target temperature is exceeded, as long as the unit is switched on.     Comfort features for well-being   "For a restful sleep without catching a cold, the device features a night mode that gradually raises the temperature. Additionally, the LED display can be completely turned off, so you won't be disturbed by any unnecessary light."    Two fan speeds and the variable adjustable airflow direction ensure optimal distribution of the air stream. In conjunction with the integrated 24-hour timer, electricity costs can be saved, as it allows for the timed switching on and off of the device. This is particularly helpful, for example, when the room is only used at certain times.    Follow-Me function: remote control with intelligent temperature measurement All functions and settings can be adjusted not only directly on the LED device control panel but also without getting up using the remote control. With the integrated "Follow-Me function," you can enjoy even more automatic comfort: The thermostat inside the air conditioning unit normally measures the current room temperature at its location and displays it on the LED screen. However, the remote control can also measure the temperature exactly at the location where it is currently situated. When the "Follow-Me function" is active, the air conditioning unit automatically receives the current temperature value from the remote control every 3 minutes and adjusts accordingly. So, for example, if you switch from a shaded spot to a sunny window with the remote control, the air conditioning unit will increase the cooling output to compensate for the warmer temperatures.    Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 1.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold growth. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal reservoir for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.     Installation and Maintenance   The air conditioning unit is set up with just a few simple steps and is ready for use immediately. The pre-assembled air filter cleans the room air of lint, dust, and pet hair and can be easily removed and cleaned.   Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.    Advantages at a Glance   • Energy efficiency class A • 2 kW cooling capacity  • Three operating modes: Cooling, Ventilation, Dehumidification• Two ventilation levels • Timer Function • Practical LED display • Display of room temperature • Easy-care membrane keypad• Adjustable air outlet direction • IR remote control • Removable air filter • Air purification function (pet hair, lint, dust)• Quiet operation   Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."     Technical data  cooling capacity max. 2 kW (7000 Btu/h) Our recommendation room size  max. 20 m² or 50 m³ Room size specification manufacturer max. 26 m² or 65 m³ Minimum room size 7 m² fan speeds 2 Selectable room temperature 17 - 30 °C dehumidification performance 1.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.3 A Recommended Coverage 10 A cable / connector 1.5 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (130g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 153 mm, Length 1.5 m Masse (H x B x T) 703 x 345 x 355 mm Weight 22.5 kg Trotec article no. 1.210.002.012 guarantee 2 years  

Learn more More Fewer

Mobiles Raumklimagerät – Effiziente 4-in-1 Lösung zum Kühlen und Heizen Dieses leistungsstarke Klimagerät bietet effiziente Kühlung für Büros und Wohnräume bis 24 m² und sorgt für ein angenehmes Arbeits- und Wohnklima. Neben dem Kühlbetrieb stehen Heiz-, Entfeuchtungs- und Ventilationsfunktionen zur Verfügung. Thermostat-Steuerung: Beim Erreichen der Zieltemperatur (16–31 °C) schaltet der Kompressor automatisch ab. Die Ventilation läuft weiter, um die Raumtemperatur präzise zu überwachen, und aktiviert die Kühlung oder Heizung bei Bedarf sofort wieder. Komfort-Funktionen zum Wohlfühlen Zwei Ventilatorstufen sowie die variabel einstellbare Ausblasrichtung sorgen für eine optimale Luftverteilung. Dank des integrierten 24-Stunden-Timers lassen sich Stromkosten sparen, da das Gerät zeitgesteuert an- und abgeschaltet werden kann. Die Steuerung erfolgt bequem per LED-Display oder IR-Fernbedienung. Gleichzeitige Entfeuchtung der Raumluft Im Sommer entzieht das Gerät der Luft bis zu 0,8 Liter Wasser pro Stunde. Dies verbessert nicht nur das Wohlbefinden bei schwülem Wetter, sondern beugt auch Schimmelbildung vor. Das Kondensat wird praktischerweise über den Abluftschlauch verdampft. Nachhaltigkeit & Klimaschutz Dieses Klimagerät nutzt Propan (R290) als umweltfreundliches Kältemittel. Es hat kein Ozonabbaupotential und einen minimalen Treibhauseffekt, was es zu einer ökologisch verantwortungsbewussten Wahl macht. Vorteile im Überblick Energieeffizienzklasse A 2,6 kW Kühl- oder Heizleistung Vier Betriebsmodi: Kühlung, Heizung, Ventilation, Entfeuchtung Herausnehmbarer, leicht zu reinigender Luftfilter Einfache Installation und sofort einsatzbereit 2 Jahre Garantie Technische Daten Merkmal Spezifikation Kühlkapazität max. 2,6 kW (9000 Btu/h) Empfohlene Raumgrösse 24 m² / 60 m³ Temperaturbereich 16 °C bis 31 °C Entfeuchtungsleistung 0,8 l/h Nennstromaufnahme 4,1 A (Kühlen) / 4,0 A (Heizen) Kältemittel R290 (160g) Schalldruckpegel (2,5 m) 56–59 dB(A) Abluftschlauch Ø 148 mm, Länge 1,5 m Abmessungen (H x B x T) 690 x 330 x 290 mm Gewicht 19,1 kg Wichtiger Hinweis zum Abluftschlauch: Als Kompressionskälteanlage muss die entstehende Wärme zwingend über den mitgelieferten Abluftschlauch nach draussen geleitet werden, um eine effiziente Kühlung zu gewährleisten.

Learn more More Fewer

A good air conditioner for cooling bedrooms, living rooms, or offices. Simply set your desired temperature in the range of 16°C to 31°C, and the device will automatically cool the room air to the set value. The extracted heat is expelled through an exhaust hose out of the window.  comfort functions With remote control, 24-hour timer, and automatic mode, this model offers you convenient control from your seat, pre-planned on or off switching, as well as self-cooling depending on the room temperature.  Ventilator function – with and without cooling Pure ventilation operation is also possible: a two-stage adjustable fan blower provides fresh air and gentle air circulation in the room with an air volume of up to 320 m³/h – even without activating the cooling compressor. The direction of the airflow can be manually adjusted with the horizontal air deflection flaps, so that the fresh breeze arrives exactly where you want it. In addition, the integrated air filter on the back of the unit filters lint, dust flakes, and pet hair from the room air – an advantage not only for allergy sufferers.  Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 0.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold formation. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal collection container for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.  Mobile and flexible instead of drilling and plugging If you want to place the device in another room, it can be easily moved from one place to another with its smooth-rolling transport wheels. Unlike permanently installed air conditioning units, you can always use a mobile air conditioner exactly where cooling is needed – without drilling, screwing, or plugging. You just need to secure the exhaust hose included in the delivery in a window or door opening, and you can start cooling the room. "To prevent warm outside air from entering the room to be cooled through the slightly opened windows or doors, we offer window and door seals as optional accessories. This way, you can cool even more efficiently."  Tip for restful sleep If you want to fall asleep on warm summer nights with gentle cooling, you can set a timer to have the air conditioning unit turn off by itself after a while to prevent your body from getting too cold during the night.  Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.  Advantages at a Glance • Suitable for rooms up to 24 m² / 60 m³• Energy efficiency class A• 2.6 kW cooling capacity• 3 operating modes: cooling, ventilation, dehumidification• 2 ventilation levels• Adjustable air outlet direction• Target value preselection in the range of 16°C to 31°C• Energy-saving operation through automatic switching off/on upon reaching/exceeding the target value• 24-hour timer• Remote control + intuitive LED display• Removable air filter against pet hair, lint, dust flakes• Quiet operation • Environmentally friendly refrigerant R290• Mobile air conditioners - Comfortable cooling machines  Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."  Technical data  cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size   max. 24 m² or 60 m³ Room size specification manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.5 A Recommended Coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, Length 1.5 m Masse (H x B x T) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1.210.002.022 guarantee 2 years  

Learn more More Fewer

  Occasionen in gutem Zustand   Die Besondere! Elegantes Design, kräftig in der Leistung und dennoch leiser, als andere mobile Klimaanlagen. WIFI-Steuerung serienmässig. Umweltgerechtes Kältemittel R290. Für Zimmer bis 30m². • 3.5 kW Kühlleistung• Kühlen (A), heizen (A++), lüften, entfeuchten• Mit WIFI, mit Fernbedienung, Abluftschlauch Es handelt sich um mobile Klimaanlagen, welche wir kurzzeitig an Kunden ausgemietet haben. Zustand optisch und technisch gut.Vorhandenes Zubehör: Gerät, Luftschlauch, Verengungsaufsatz zur Fensterdurchführung, Fernbedienung. Die Bedienungsanleitung finden Sie hier zum Download.Garantie 1 Jahr. Sofort abholbereit im Aircenter Baden, auch Versand ist möglich.     Unserer Meinung nach das beste mobile Klimagerät auf dem Markt. Der leicht höhere Preis rechtfertigt sich für alle, die Wert auf Optik, Komfort und Betriebsgeräusch legen. Vom Prinzip her ist das "Milo" ein freistehendes Klimagerät, dessen Abluft mit einem Schlauch entweder aus dem Fenster oder in einen benachbarten Raum geführt wird. Es verfügt über ein kräftiges Gebläse mit Lamellen oben am Gehäuse, welche entweder fix in eine Richtung arretiert werden oder per Swing-Funktion die ausströmende Kaltluft vertikal fächern. Trotz viel Umluft ist das Betriebsgeräusch leiser, als bei anderen Geräten dieser Kategorie, wenn auch dieses wie bei allen mobilen Klimaanlagen nach wie vor gut wahrnehmbar ist.Nach Erreichen der gewünschten Temperatur unterbricht das Gerät die Kühlung (resp. im Heizmodus die Heizung) solange, bis sich die Temperatur wieder verändert. Die Ventilation läuft wie bei den meisten Klimageräten immer, um die Luft im Raum bestmöglich umzuwälzen. Der wählbarer Temperaturbereich geht von 16 bis 30°C. Mit dem Timer kann die Betriebsdauer zwischen 1 - 24 Std. begrenzt werden. Weiter kann auch ein Startzeitpunkt des Betriebes 1-24 Stunden in die Zukunft programmiert werden, so dass sie z.B. 1 Std. vor Ihrer Rückkehr oder vor dem Schlafengehen automatisch einschaltet.Die folgenden Eigenschaften unterscheidet das "Milo Plus" von handelsüblichen Geräten:Konstante Temperatur haltenGrundsätzlich kann gewählt werden, ob das Gerät kühlt oder heizt. Im "Auto"-Modus kann jedoch auch eine gewünschte konstante Temperatur gewählt werden. Fällt die Raumtemperatur darunter, läuft die Anlage im Heizmodus, liegt sie darüber, wechselt sie automatisch auf die Kühlfunktion. Diese Möglichkeit ist bei mobilen Geräten sehr selten.   WIFI-FunktionÜber ein App lassen sich alle Funktionen bequem über WLAN steuern. Selbstverständlich kann das Gerät aber auch traditionell per Tastatur gesteuert werden. Die Fernbedienung ist bei diesen Occasionen nicht mehr verfügbar und nicht im Lieferumfang enthalten.  KindersicherungBei Bedarf kann die Kindersicherung zugeschaltet werden um zu verhindern, dass Kinder die Einstellungen verändern.Schimmelschutz "X-FAN" (nur auf Fernbedienung)mit dieser Funktion läuft die Ventilation im Anschluss an Kühlung oder Entfeuchtung 2 Minuten lang weiter. Dadurch wird das noch feuchte Innenleben im Gerät abgetrocknet und verhindert die Bildung von Schimmel im Gerät.MemoryfunktionNach Stromunterbruch wird der Betrieb automatisch mit unveränderter Einstellung wieder aufgenommen. Somit eignet sich dieses Modell auch für den Betrieb an einer Zeitschaltuhr.Umweltgerechtes Kältemittel R290Auch der grüne Gedanke wird berücksichtigt: Das "Milo Plus" ist mit dem neusten Kältemittel R290 praktisch klimaneutral ausgestattet. Das R290 belastet die Umwelt kaum noch, oder in Zahlen: 600 x weniger, als die noch bis vor kurzem eingesetzten Vorgängerprodukte. Selbstverständlich wird ein Klimagerät auch mit neustem Kältemittel nie so umweltfreundlich sein, wie ein Sprung ins kalte Nass oder unbeirrtem Weiterschwitzen.Ausführung / Lieferumfang• Kunststoffgehäuse weiss• Bedienerfeld mit Display der gewünschten Temperatur und der aktuellen Raumtemperatur• 4 Rollen• Ausziehbarer Abluftschlauch ca. 1.20m (mit Verengungsaufsatz für Kippfenster)• Kabel ca. 1.50 m mit Schweizer Stecker (normale Steckdose 230V / dreipolig)• Mehrsprachige Bedienungsanleitung u.a. mit Deusch, Französisch, Italienisch• Energieklasse A im Kühlbetrieb, A++ im Heizmodus.• Umweltfreundliches Kühlmittel R290   Nicht geeignet zur ganzjährigen Kühlung von Serverräumen. Wie bei allen mobilen Klimageräten ist auch bei diesem Gerät Lüftung und Motor gut hörbar, wenn auch wahrnehmbar leiser, als bei Geräten mit vergleichbarer Leistung, insbesondere auf der kleinsten Lüfterstufe.     Technische Daten  Funktionen: Kühlen, heizen, entfeuchten, lüften Energieklasse: A (kühlen), A++ (heizen) Kälteleistung: 3500 W / 13000 BTU/h Verbrauch Kühlmodus: 1300 W Heizleistung: 3500 W / 13000 BTU/h Verbrauch Heizmodus: 1100W Geeignet für Räume bis 30m² Luftvolumen: max. 380m³/h Ventilator 3-stufig wählbare Temperatur: 16 - 30° C Ø Abluftschlauch innen/aussen: 14 / 15 cm (Länge 120 cm) Kältemitttel: R290  Netzanschluss: 230V / 50 Hz Versandgewicht: 36 kg Masse: Höhe x Breite x Tiefe: 835 x 385 x 405 mm Geräuschpegel: Unsere Messung:1.0 m Entfernung Lüfterstufe 1/3: 52 / 56 dB(A)2.5 m Entfernung Lüfterstufe 1/3: 49 / 53 dB(A) Garantie: 1 Jahr

Learn more More Fewer

Trotec PAC 3500 SH – Leistungsstarkes 4-in-1-Klimagerät mit Heizfunktion Das Trotec PAC 3500 SH ist die ideale All-in-One-Lösung für ganzjährigen Klimakomfort in Ihrem Zuhause oder Büro. Ob im heissen Sommer oder in der kalten Übergangszeit – dieses mobile Klimagerät kühlt, heizt, ventiliert und entfeuchtet Räume bis ca. 46 m² / 115 m³. Mit einer starken Kühlleistung von 3.5 kW (12.000 BTU) sorgt das PAC 3500 SH schnell und effizient für angenehm kühle Raumtemperaturen. Dank der integrierten Heizfunktion (2,9 kW) ist es zudem ein zuverlässiger Wärmespender, wenn es draussen kälter wird.   Die Funktionen des Trotec PAC 3500 SH im Überblick: 4-in-1 Klimagerät: Bietet Kühlung, Beheizung, Ventilation und Entfeuchtung in einem Gerät. Energieeffizienzklasse A: Spart Strom und schont die Umwelt. Umweltfreundliches Kältemittel R290: Nutzt Propan mit geringem Treibhauspotenzial. Luftreinigungsfunktion: Filtert Tierhaare, Flusen und Staub für bessere Raumluft. IR-Fernbedienung mit integrierter Temperaturmessung: Für präzise und komfortable Steuerung. Leiser Betrieb: Angenehmer Geräuschpegel von nur ≤ 54,5 dB(A) (Herstellerangabe). 24-Stunden-Timer: Für die zeitgesteuerte Nutzung und mehr Flexibilität. Automatikmodus mit Temperaturwahl: Optimiert die Klimaregulierung selbstständig. Modernes Design und einfache Bedienung Das moderne Design des PAC 3500 SH, seine einfache Bedienung über das intuitive Bedienfeld oder die Fernbedienung und die starke Leistung machen es zur perfekten Wahl für Wohnräume, Büros oder Ferienwohnungen, die ein flexibles und effektives Raumklimagerät benötigen. Lieferumfang: Klimagerät PAC 3500 SH Fernbedienung Abluftschlauch & Fensteradapter Bedienungsanleitung Technische Daten: Kühlleistung: 3,5 kW / 12.000 BTU Heizleistung: 2,9 kW Luftumwälzung: max. 420 m³/h Entfeuchtungsleistung: 1,2 l/h Geräuschpegel: 54 dB(A) Abmessungen (L x B x H): 450 x 395 x 745 mm Gewicht: ca. 30 kg

Learn more More Fewer

This plug-and-play compact unit does not require an outdoor unit. It can be used as a cost-effective solution for use in hotel rooms, offices, bedrooms, and in various container applications for schools or temporary setups. Thanks to inverter technology, it is economical and quieter than similar models.   Assembly The device is mounted on an exterior wall in the room. On the back, there is an opening through which outside air is drawn in, as well as an opening through which warm air is blown out (or in heating mode: cold air is blown out). Before the system can be installed, two core drillings are required in the wall, which are aligned with these openings. You can find the details in the installation manual in the "Downloads" section on this page.  cooling and heating Thanks to heat pump technology, the "Apollo" can be used for both cooling and economical heating of rooms. The appropriate function is selected at the push of a button.  program functions The operation is simple and can be done either on the device's display itself or via the WLAN function using a mobile phone or tablet. "Eco" function: for lower consumption"Turbo" function: desired temperature in the shortest time"Anti-Cold Wind" function in heating mode: The air is only released into the room when it has been sufficiently warmed up."Sleep" function: Optimizes the operation of the air conditioning unit during nighttime hours."Autodiagnosis" function: Display of errors on the device screen for easy troubleshooting.  Features and Benefits • Ideal for a room size of 70m³• Remote-controlled WLAN with its own app• 4 in 1: Cooling, heating, dehumidifying, ventilating• Energy efficiency class A in cooling mode and in heating mode• Automatic swivel movement or individually adjustable position of the air deflector (Flap) to optimally direct the airflow in the room.• Programmable Timer ON/OFF 24h• 2 holes in the wall and unobtrusive aesthetics• Type of condensate drainage: Through external or internal piping• DC inverter technology, maximum comfort, minimal consumption• Ventilation speeds: 3 + Auto  Technical data Cooling capacity: 2400 W / 8530 BTU/hHeating power: 2400 W / 8530 BTU/hRecommended room size: 70 m³Energy efficiency class: AHousing color: whiteRefrigerant: R32 (0.39 kg)Noise level indoor unit: 56 dB(A)Dimensions (H x W x D): 615 x 965 x 200 mmNet weight: 36.2 kgWarranty: 24 months

Learn more More Fewer

The Ulisse 13DCI bridges the gap between conventional mobile monoblock air conditioning units and permanently installed split air conditioning systems by combining the advantages of both systems. It is portable and consists of an indoor and outdoor unit connected by a flexible refrigerant line. The outdoor unit can be conveniently placed on the terrace or mounted on an exterior wall, while the indoor unit is set up in the room or office to be cooled. Compared to monoblock air conditioning units, the Ulisse 13DCI offers significantly quieter operation and improved energy efficiency. Thanks to state-of-the-art inverter technology, the compressor's performance automatically adjusts to the actual cooling demand, thereby avoiding continuous operation at full capacity. The operation of the device is incredibly simple and comfortable via the included remote control. The desired target temperature can be set in 1°C increments within the range of 10°C to 32°C. As with all air conditioning units, the actual achievement of the target temperature depends on the room size and heat input, for example, from sunlight or devices present in the room. The "I Feel" function allows for precise temperature control at the user's location. The device has two measurement points: one on the device itself and another in the remote control. By pressing the "I Feel" button, the remote control measures the temperature at the current location and adjusts the air conditioning unit accordingly. For example, the remote control can be placed on the sofa to ensure an optimal temperature directly at the seating area. For the "I Feel" function to work properly, a direct line of sight between the remote control and the indoor unit is required. The warm indoor air is drawn in at the front of the indoor unit, cooled, and then blown back into the room from the upper front area. During the cooling process, excess moisture is simultaneously removed from the air. The condensate is directed through a hose via the connection line to the outdoor unit, where it is automatically misted before the fan. Important to know when dealing with mobile split air conditioning units • the indoor and outdoor units are connected by a copper refrigerant line. Copper is not reversible, meaning: if the copper line is bent, it is destroyed and must be replaced (cost for a 2m line: Fr. 310.-).• If the line between the indoor and outdoor unit is to be routed through a hole (e.g., in the wall), it must be disconnected from the outdoor unit. This requires knowledge in handling refrigerant lines and should be done by a professional. Otherwise, it is likely that refrigerant will escape during the disconnection process, which will impair cooling performance. We have appropriately trained professionals and can offer you both delivery and installation.    Scope of delivery Split air conditioning 13dci• Mobile air conditioning unit WITH WIFI function• Indoor and outdoor unit with 2m refrigerant line (already connected and ready for operation)• Remote control• Cable approx. 2.30 m with Swiss plug (standard socket 230V / three-pole)• Operating instructions in German + IT / FR / EN + other languagesLatest series"With us, you will receive the latest series with environmentally friendly R32 refrigerant. The optional extension lines are available for the old R410A or the new R32. Please note when ordering lines, which refrigerant is used in your device." Optional accessoriesextension cords• The length of the refrigerant line included in the delivery is 2m. This can be extended if necessary with extension lines of 2m or 4m up to a maximum of 6m.Wall mount for outdoor unit• If you want to mount the outdoor unit on a wall, a suitable wall bracket is optionally available from us (Fr. 49.-).     SEER: 5.2  Technical data  Energy Efficiency Class A Operating modes Cooling, ventilation For rooms up to max. 40m² (depending on heat sources) Cooling performance 3920 W / 13340 BTU/h Connection voltage 230 Volts - 50 Hz Adjustment range temperature 10° - 32° C Power consumption 1600 W Dehumidification capacity approx. 1.9 L/h coolant R32 Operating noise dB(A) (min/max) 37 - 40 (our measurement)34 - 37 (Manufacturer's specification) Air circulation (level 1-2-3) 335-375-400 m³/h Operation remote control Cable included in the delivery 2 m (ø40 mm) Mass Indoor Unit (HxWxD) 79 x 58 x 25 cm Mass Outdoor Unit (HxWxD) 49 x 53 x 25 cm Weight indoor / outdoor unit 42 / 15 kg Guarantee 2 years   Quick course to establish WIFI connection to Ulisse   Connect device to power supply (or unplug and plug back in) Press the power button for 5 seconds until the WIFI light blinks. Connect desired device to WLAN network "UI_Setup" Enter and open the following in the internet; 192.168.4.1 Select the WLAN to which the Ulisse must be connected, enter the password, click "APP Connect." Change username and password upon request and click «APP Connect» again. Ulisse can now be served.

Learn more More Fewer

The compact air conditioning units "WFD" from AIRWELL are quickly installed. Essentially, the units are pushed through wall openings or appropriately prepared windows. One side extends into the room to be cooled, while the other typically blows the extracted heat outside, but it can also be directed into an adjacent room. With these window air conditioners, rooms can be cooled, but they can also be used solely for dehumidification if needed. The side with the operator panel faces into the room, with only a short part of the device protruding from the wall. This side also contains the air intake area with the inserted filter as well as the outlet for the cooled air. The part that extends outward, on the other hand, is somewhat longer and should be supported by a console or a bracket. The device has two air circuits: One refers to the interior space. It draws in warm room air and blows cooled air into the room. The second circuit is located in the outdoor area, where it draws in outside air to release the waste heat outside.The operation can be carried out either via the keyboard on the device itself or via the infrared remote control included in the delivery. A display shows the values.Functions of the operator panel• On/off switch• Setting of the desired operating mode (only recirculation, dehumidification, or air conditioning)• Setting the desired target temperature using the up/down arrow keys in the range between 16°C and 30°C.• Setting of the desired ventilation level 3-stage + auto program• Setting whether the air outlet louvers should swing vertically or remain stationary (horizontal alignment can be adjusted manually)• Duration limitation with timer, half-hourly up to a maximum of 24 hoursDrainage of condensate water"During cooling/dehumidification, moisture is removed from the air. This accumulates as condensate in the device. There are two selectable options for drainage:"a) As standard, water drips over the condenser coils (the warm part of the heat exchanger in the device) and automatically evaporates with the blown warm air. This solution is generally used as it simultaneously increases the cooling performance. However, it may cause a slight background noise.b) the water is drained through the existing hose connection, thus not evaporated. Converting to this solution requires opening the housing, but can be done in a relatively short time. This solution causes hardly any additional noise.operating noiseThe operating noise primarily depends on the selected fan speed. The stronger the ventilation, the more noticeable the operating noise is. Compact air conditioning units are significantly more pleasant in terms of volume, unlike mobile air conditioning units with exhaust hoses, but they are not comparable to fixed installed split air conditioning systems.Air filterIn the intake area of the air, a filter is inserted, which should be cleaned occasionally. The filter serves to ensure that as little dirt as possible accumulates in the device and also to prevent dust from being blown into the room. There is an LED light on the control panel that appears after every 250 operating hours to remind you to clean the filter.memory function"After a power failure, the WFD automatically resumes work with unchanged settings."Further informationInverterInverter technology is more economical because the compressor only runs with as much power as is currently needed, while conventional devices either operate at full power or not at all. In terms of operating noise, inverter devices are usually quieter as well, because full power is rarely called upon.Power supplyThe power supply is provided from the interior. A normal household socket is sufficient.angle of inclinationDuring installation, the back of the unit should be tilted a few millimeters downwards to avoid noise or vibrations.Refrigerants of the latest generation"With us, you will receive the latest series with R32 (propane) refrigerant. R32 is one of the most environmentally friendly refrigerants on the market and has a significantly lower environmental impact, approximately 600 times less than previous refrigerants."  scope of delivery- Compact air conditioning unit WFD in the desired strength with cable and plug- remote control- Operating instructions and service manualTechnical data     WFD009-C11   WFD012-C11   operating modes Cooling, Dehumidifying, Only Recirculation For rooms up to max. 30m² 40m² Cooling performance 2750 W 3700W connection voltage 1P/230V/50Hz insurance 10A Setting range temperature 16° - 30° C Power consumption 810 W 1090 W dehumidification performance 1.0 L/h 1.2 L/h Kühlmittel R32 / 510g R32 / 630g Operating noise at a distance of 1m Manufacturer specification fan speed 1 / 2 / 3 45 / 47 / 49 dB(A) Air circulation (Level 1 / 2 / 3) 310 / 350 / 380 m³/h 400 / 450 / 490 m³/h service Operator panel or remote control Mass (HxWxD) 375 x 560 x 710 mm 428 x 660 x 700 mm Weight indoor / outdoor unit 34 kg 46 kg guarantee 2 years

Learn more More Fewer

This mobile split air conditioner impresses with strong cooling performance as well as the ability to place the indoor and outdoor units up to 30 m apart. Thanks to its appealing design and quiet operation, it is ideally suited for representative areas, trade fairs, and for cooling retail stores or fitness centers. functionality The air conditioning unit absorbs heat in a cooling system. From there, the heat is transferred to the closed cold water/glycol system. It is then pumped through the outdoor unit, where the water is cooled and the heat is dissipated. The operation is possible at ambient temperatures of up to 45 °C.   The indoor unit is connected to the outdoor unit via two flexible hoses with quick-release fittings. These hoses are supplied in lengths of 10 m and can be connected to a maximum length of 30 m. Therefore, the indoor and outdoor units can be positioned up to 30 meters apart and at different heights (up to 10 meters) if needed.   Intelligent control reduces energy consumption The indoor unit is equipped with an EC fan. This means that the speed of the fan intelligently adjusts to the actual cooling demand. This automatic regulation minimizes energy consumption and avoids unnecessary noise, allowing you to work in a quiet environment. Furthermore, the fan of the outdoor unit dynamically adjusts to the outside temperatures, ensuring optimal performance regardless of weather conditions.   Remote monitoring possible "Through a mobile app, it is possible to monitor and control the operation. Managing multiple devices simultaneously is also effortless."    Advantages at a Glance • Robust metal construction• High-efficiency cooling circuit• Cooling capacity of up to 7 kW• Air flow rate of 800 to 1450 m³/h• Operating temperatures of up to -5°C• Simple installation without prior training• Quick connections for cooling lines• Indoor unit with infinitely variable fan speedand adjustable grid• Remote control via app• Up to 30 meters installation distance betweenIndoor and outdoor unit• Slim water and glycol hose connectionmakes large air ducts unnecessary   scope of delivery 1 x indoor unit1 x outdoor unit1 x Standard Hose Set1 x cable for the electrical connection of indoor and outdoor unit1 x power cable (for indoor unit)   Important  The power consumption is a maximum of 2950 watts.This means that a Type 23 socket (16 Amperes) is required for operation.       Technical data operating modes cooling, ventilation For rooms up to max. 150m² (depending on heat sources) Cooling capacity max. Cooling capacity at 25 °C 7000 W / 23884 BTU/h6500 W / 22178 BTU/h connection voltage 230 Volts - 50 Hz Operating temperature range -5 °C - +45 °C Power consumption max. 2950 W Protection class indoor / outdoor unit  IP44 / IP55 refrigerant R454C (840 gr), GWP 148 Refrigerant of the outdoor unitSpecification of the glycol 10.5 liters of water, 4.5 liters of glycol Monopropylene glycol 1.2 Sound level at 1m distance 62 dB (A), manufacturer's specification air circulation min. 800 m³/h - max. 1450 m³/h service Touch Screen + App Cable included in the delivery 10 m Mass Indoor Unit (H x W x D) 1025 x 880 x 400 mm Mass Outdoor Unit (H x W x D) 580 x 700 x 250 mm Weight indoor / outdoor unit  114 kg / 19 kg guarantee 2 years    

Learn more More Fewer

Dantherm AC 15000 – Mobile Hochleistungsklimaanlage für Industrie, Gewerbe & kritische Anwendungen Das Dantherm AC 15000 ist ein professionelles mobiles Split-Klimagerät für anspruchsvolle Kühlaufgaben in Industrie, Gewerbe, IT-Umgebungen und temporären Einsatzbereichen. Mit bis zu 18.3 kW Kühlleistung sorgt das mobile Klimasystem selbst bei extremen Aussentemperaturen von bis zu 47 °C zuverlässig für stabile und angenehme Raumtemperaturen. Dank der Split-Bauweise bleibt die Geräuschentwicklung im Innenbereich deutlich reduziert, während die Wärme effizient nach aussen abgeführt wird. Die robuste Konstruktion, die hohe Mobilität und die einfache Inbetriebnahme ohne Kältetechniker machen das AC 15000 zur idealen Lösung für temporäre Notfallkühlung, Produktionsumgebungen, Serverräume, Events oder kritische Infrastrukturen. Flexible Sofortlösung: Das AC 15000 arbeitet mit selbstabdichtenden Schnellkupplungen und benötigt keine Installation durch einen Kältetechniker. Dadurch eignet sich das Gerät ideal für temporäre Einsätze, Notfälle oder flexible Kühlanforderungen. Exklusive Highlights des Dantherm AC 15000 Extrem hohe Kühlleistung Mit bis zu 18.3 kW Kühlleistung eignet sich das AC 15000 auch für grosse Hallen, Serverräume, Produktionsbereiche oder kritische Infrastrukturen. EC-Ventilatortechnologie Die intelligenten EC-Ventilatoren passen ihre Drehzahl automatisch an die Temperaturbedingungen an und reduzieren dadurch Energieverbrauch und Geräuschentwicklung. Sofort einsatzbereit Keine feste Installation notwendig. Das System kann schnell transportiert und innerhalb kürzester Zeit in Betrieb genommen werden. Maximale Flexibilität 10 Meter Schlauchlänge serienmässig – erweiterbar auf bis zu 30 Meter. Auch Höhenunterschiede bis 8 Meter sind problemlos möglich. Ideal für Notfallkühlung Perfekt geeignet für Hitzewellen, Ausfälle stationärer Klimaanlagen oder temporäre Kühlanforderungen in sensiblen Bereichen. Dantherm Control App Steuerung und Überwachung mehrerer Geräte via Bluetooth oder Cloud – inklusive Temperaturregelung, Timer und Wochenplanung. Typische Einsatzbereiche Serverräume & IT-Infrastruktur Produktionshallen & Industrie Lager & Logistik Events, Festzelte & Messen Büros & Verkaufsflächen Baustellencontainer & temporäre Gebäude Hotels & Gastronomie Nachhaltige Technologie: Das AC 15000 verwendet das moderne Kältemittel R-454C mit einem deutlich reduzierten Treibhauspotenzial (GWP 148) und erfüllt aktuelle F-Gas-Vorgaben. Technische Daten – Dantherm AC 15000 Merkmal Spezifikation Kühlleistung bei 25 °C 15000 W / 51240 Btu/h Max. Kühlleistung 18300 W / 62442 Btu/h Leistungsaufnahme 7960 W max. Luftdurchsatz Innengerät 2000 – 3000 m³/h Luftdurchsatz Boost-Modus 3450 m³/h Lüfterstufen 5 + Boost Betriebsmodi Kühlung, Belüftung, Automatik Luftvolumen Aussengerät 6700 m³/h Geräuschpegel Innengerät 69 dB(A) Betriebstemperatur Aussengerät -5 °C bis +47 °C Stromversorgung 400 V / 3 Phasen / 50 Hz Absicherung 16 A Schutzklasse IP22 / IP24 Kältemittel R-454C / 2400 g Treibhauspotenzial (GWP) 148 Abmessungen Innengerät 1175 × 601 × 1315 mm Gewicht Innengerät 200 kg Abmessungen Aussengerät 1019 × 509 × 1420 mm Gewicht Aussengerät 135 kg Hinweis: Durch die Split-Technologie bleibt die Geräuschentwicklung im Innenbereich deutlich geringer als bei klassischen Monoblock-Systemen vergleichbarer Leistungsklasse. Das Dantherm AC 15000 ist die ideale Lösung für Unternehmen, die eine leistungsstarke, mobile und sofort verfügbare Kühlung für anspruchsvolle oder temporäre Anwendungen benötigen.

Learn more More Fewer