Wall-mounted pool dehumidifiers The condensation dehumidifiers CDP 40T-50T-70T have been designed for wall mounting in your swimming pool technical room with wall passage. The dehumidifiers are designed as extremely durable devices and feature intuitive remote control and monitoring options for easy operation. In combination with highly efficient fans and compressors, this ensures efficient operation and significant energy savings.   The range is also available in wall-mounted or freestanding versions.   Important functions: Low noise level Low energy consumption Epoxy-coated evaporator and condenser coil Metal parts are powder coated before assembly. Optional remote control Integrated heating and humidity control (ON/OFF) BMS Communication (Modbus) 230V connection   "Dantherm CDP 40-50-70T dehumidifiers for humidity control in indoor swimming pools have been developed with a focus on quality, functionality, and energy savings. Highly efficient fans and compressors, combined with new advanced remote control and monitoring options, contribute to cost-effective operation and significant energy savings."   The CDP-T is an energy-efficient wall-mounted dehumidifier that is installed in adjacent rooms. It operates on the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. As the air passes through the evaporator, it is cooled below its dew point temperature, and its water vapor content condenses into water, which falls into the drip tray and is then directed from the drip tray to a drain. The cold, dry air is then passed over the condenser coil and reheated there before leaving the unit at a temperature that is approximately 5 °C higher than at the inlet. Integrated electronic hygrostat and thermostat. Active, demand-controlled defrosting.   Specifications units CDP 40T Operating temperature range °C 10-36 operating humidity range % RH 40-100 Dehumidification at 28 °C/60 % RH l/24h 34 recirculation m³/h 400 Sound pressure level dB(A) 43 power connection V/Hz 230/1ph/50 Product size (W × D × H) etc

Learn more More Fewer

Wall-mounted/freestanding pool dehumidifier CDP 40 The wall-mounted or freestanding condensation dehumidifiers CDP 40-50-70 have been designed to integrate well into any modern swimming pool setting. The devices offer energy-efficient and nearly silent humidity control and have been designed with quality and ease of use in mind. In combination with highly efficient fans and compressors, the advanced remote control and monitoring options contribute to cost-effective operation and significant energy savings. Important functions Low noise level Low energy consumption Epoxy-coated evaporator and condenser coil Metal parts are powder coated before assembly. Optional remote control Integrated heating and humidity control (ON/OFF) BMS Communication (Modbus) 230V connection   "Dantherm CDP 40-50-70 dehumidifiers for humidity control in indoor swimming pools have been developed with a focus on quality, functionality, and energy savings. Highly efficient fans and compressors, combined with new advanced remote control and monitoring options, contribute to cost-effective operation and significant energy savings." The CDP is an energy-efficient and quiet pool dehumidifier. It operates on the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. As the air passes through the evaporator, it is cooled below its dew point temperature, and its water vapor content condenses into water, which falls into the drip tray and is then directed from the drip tray to a drain. The cold, dry air is then passed over the condenser coil and reheated there before leaving the unit at a temperature that is approximately 5 °C higher than at the inlet. Integrated electronic hygrostat and thermostat. Active, demand-controlled defrosting.   Specifications units CDP 40 Operating temperature range °C 10-36 operating humidity range % RH 40-100 Dehumidification at 28 °C/60 % RH l/24h 34 recirculation m³/h 400 Sound pressure level dB(A) 46 power connection V/Hz 230/1ph/50 Product size (W × D × H) etc

Learn more More Fewer

The energy-efficient and quiet powerful dehumidifiers of the CDF series are ideal for preserving and protecting your valuables from moisture damage. They are suitable for regulating humidity in workshops, warehouses, museums, churches, archives, and waterworks. Important functions Modern Design Low noise level Low power consumption Integrated control of humidity and temperature BMS Communication (Modbus RTU) Built into a strong and robust powder-coated and galvanized sheet metal housing Evaporator and condenser coils epoxy-coated for maximum corrosion resistance  Controls Integrated electronic hygrostat and thermostat Integrated ON/OFF control of humidity and temperature (electric or hot water heating register as an accessory) 230 V for control valve, exhaust fan, and pump/boiler RS485 for Modbus communication  Suitable for Archiving and Storage Storage of classic cars commercial building emergency services Food and beverages Industry, factories and production cultural heritage Leisure and Recreation Defense and Aerospace museums and galleries Pharmacy and Science residential buildings Transport and Logistics Warehouses and Storage waterworks  Technical data: Specifications units CDF 40 Operating temperature range °C

Learn more More Fewer

Wall-mounted/freestanding pool dehumidifier CDP 50 The wall-mounted or freestanding condensation dehumidifiers CDP 40-50-70 have been designed to integrate well into any modern swimming pool setting. The devices offer energy-efficient and nearly silent humidity control and have been designed with quality and ease of use in mind. In combination with highly efficient fans and compressors, the advanced remote control and monitoring options contribute to cost-effective operation and significant energy savings.   Important functions Low noise level Low energy consumption Epoxy-coated evaporator and condenser coil Metal parts are powder coated before assembly. Optional remote control Integrated heating and humidity control (ON/OFF) BMS Communication (Modbus) 230V connection   "Dantherm CDP 40-50-70 dehumidifiers for humidity control in indoor swimming pools have been developed with a focus on quality, functionality, and energy savings. Highly efficient fans and compressors, combined with new advanced remote control and monitoring options, contribute to cost-effective operation and significant energy savings." The CDP is an energy-efficient and quiet pool dehumidifier. It operates on the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. As the air passes through the evaporator, it is cooled below its dew point temperature, and its water vapor content condenses into water, which falls into the drip tray and is then directed from the drip tray to a drain. The cold, dry air is then passed over the condenser coil and reheated there before leaving the unit at a temperature that is approximately 5 °C higher than at the inlet. Integrated electronic hygrostat and thermostat. Active, demand-controlled defrosting.   Specifications units CDP 50 Operating temperature range °C 10-36 operating humidity range % RH 40-100 Dehumidification at 28 °C/60 % RH l/24h 52 recirculation m³/h 680 Sound pressure level dB(A) 47 power connection V/Hz 230/1ph/50 Product size (W × D × H) etc

Learn more More Fewer

The energy-efficient and quiet powerful dehumidifiers of the CDF series are ideal for preserving and protecting your valuables from moisture damage. They are suitable for regulating humidity in workshops, warehouses, museums, churches, archives, and waterworks. Important functions Modern Design Low noise level Low power consumption Integrated control of humidity and temperature BMS Communication (Modbus RTU) Built into a strong and robust powder-coated and galvanized sheet metal housing Evaporator and condenser coils epoxy-coated for maximum corrosion resistance  Controls Integrated electronic hygrostat and thermostat Integrated ON/OFF control of humidity and temperature (electric or hot water heating register as an accessory) 230 V for control valve, exhaust fan, and pump/boiler RS485 for Modbus communication  Suitable for Archiving and Storage Storage of classic cars commercial building emergency services Food and beverages Industry, factories and production cultural heritage Leisure and Recreation Defense and Aerospace museums and galleries Pharmacy and Science residential buildings Transport and Logistics Warehouses and Storage waterworks Technical data Specifications units CDF 50 Operating temperature range °C

Learn more More Fewer

Wall-mounted pool dehumidifier CDP 50T The condensation dehumidifiers CDP 40T-50T-70T have been designed for wall mounting in your swimming pool technical room with wall passage. The dehumidifiers are designed as extremely durable devices and feature intuitive remote control and monitoring options for easy operation. In combination with highly efficient fans and compressors, this ensures efficient operation and significant energy savings.   The range is also available in wall-mounted or freestanding versions.   Important functions: Low noise level Low energy consumption Epoxy-coated evaporator and condenser coil Metal parts are powder coated before assembly. Optional remote control Integrated heating and humidity control (ON/OFF) BMS Communication (Modbus) 230V connection   "Dantherm CDP 40-50-70T dehumidifiers for humidity control in indoor swimming pools have been developed with a focus on quality, functionality, and energy savings. Highly efficient fans and compressors, combined with new advanced remote control and monitoring options, contribute to cost-effective operation and significant energy savings."   The CDP-T is an energy-efficient wall-mounted dehumidifier that is installed in adjacent rooms. It operates on the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. As the air passes through the evaporator, it is cooled below its dew point temperature, and its water vapor content condenses into water, which falls into the drip tray and is then directed from the drip tray to a drain. The cold, dry air is then passed over the condenser coil and reheated there before leaving the unit at a temperature that is approximately 5 °C higher than at the inlet. Integrated electronic hygrostat and thermostat. Active, demand-controlled defrosting.     Specifications units CDP 50T Operating temperature range °C 10-36 operating humidity range % RH 40-100 Dehumidification at 28 °C/60 % RH l/24h 52 recirculation m³/h 680 Sound pressure level dB(A) 44 power connection V/Hz 230/1ph/50 Product size (W × D × H) etc

Learn more More Fewer

The wall-mounted or freestanding condensation dehumidifiers CDP 40-50-70 have been designed to integrate well into any modern swimming pool setting. The devices offer energy-efficient and nearly silent humidity control and have been designed with quality and ease of use in mind. "In combination with highly efficient fans and compressors, the advanced remote control and monitoring options contribute to cost-effective operation and significant energy savings."  Important functions Low noise level Low energy consumption Epoxy-coated evaporator and condenser coil Metal parts are powder coated before assembly. Optional remote control Integrated heating and humidity control (ON/OFF) BMS Communication (Modbus) 230V connection   "Dantherm CDP 40-50-70 dehumidifiers for humidity control in indoor swimming pools have been developed with a focus on quality, functionality, and energy savings. Highly efficient fans and compressors, combined with new advanced remote control and monitoring options, contribute to cost-effective operation and significant energy savings." The CDP is an energy-efficient and quiet pool dehumidifier. It operates on the condensation principle. A fan draws the humid air into the dehumidifier and through an evaporator coil. As the air passes through the evaporator, it is cooled below its dew point temperature, and its water vapor content condenses into water, which falls into the drip tray and is then directed from the drip tray to a drain. The cold, dry air is then passed over the condenser coil and reheated there before leaving the unit at a temperature that is approximately 5 °C higher than at the inlet. Integrated electronic hygrostat and thermostat. Active, demand-controlled defrosting.     Technical data   Operating temperature range 10-36°C operating humidity range 40-100 % RH dehumidification 69 liters / 24h at 28°C/60% r.H. recirculation 900 m³/h Sound pressure level 50 dB(A) power connection 230V/1ph/50Hz Product size (W×D×H) 1495x326x770 mm Weight 75.5 kg    

Learn more More Fewer

Der kompakte Luftentfeuchter für an die Wand DH 120 eignet sich bestens für eine effektive Feuchtigkeitskontrolle in mittelgrossen Gewerberäumen und zur Trocknung von feuchten Kellerzonen und Archivräumen sowie mittelgrossen Schwimmhallen.Mit seiner Entfeuchtungsfähigkeit von bis zu 150 Litern pro Tag (bei 30 °C und 80 % relativer Luftfeuchtigkeit) hält er die Luftfeuchtigkeit präzise unter Kontrolle. Das beugt effektiv der Bildung von Schimmel vor und schützt so Ihre Räumlichkeiten und Materialien.  Merkmale und VorteileDieses wandmontierte Gerät überzeugt nicht nur durch seine robuste Bauweise und sein benutzerfreundliches Design: Langlebigkeit: Das Aluminiumgehäuse und die kataphoretisch beschichteten Wärmetauscher bieten eine hohe Korrosionsbeständigkeit, was u.a. auch den Einsatz in Schwimmhallen ermöglicht. Präzise Feuchtigkeitsregelung: Ein elektronischer Hygrostat regelt die Luftfeuchtigkeit automatisch auf den gewünschten Wert. Benutzerfreundlichkeit: Das intuitive Bedienfeld und die einfache Installation machen die Handhabung des DH 120 unkompliziert. Praktischer Wasserablauf: Der direkte Wasserablauf erspart das Entleeren eines Tanks. Das entzogene Kondensat wird über einen fallend installierten Schlauch in einen nahen Abfluss geleitet.  Wandmontage: Das  Modernes Design: Das unauffällige und moderne Design fügt sich nahtlos in jede Umgebung ein. 2-stufige Ventilation: Je nach Feuchtigkeit und Raumgrösse kann die Ventilation auf Stufe 1 oder 2 eingestellt werden. Technische Daten Spezifikation Wert Betriebstemperaturbereich 5 - 40 °C Betriebsfeuchtigkeitsbereich 40 - 80 % Luftdurchsatz 800 / 1200 m³/h Schalldruckpegel (in 1 m Abstand) 51/56 dB(A) Entfeuchtungsleistung (30°C/80% r.F.) 150 L/24h Entfeuchtungsleistung (20°C/60% r.F.) 66.0 L/24h Verbrauch (30°C/60% r.F.) 0.51 kWh/L Verbrauch (20°C/60% r.F.) 0.56 kWh/L Gasgewicht R290C/CO₂-Äquivalent 1.6 kg / 0.237 t Stromspannung 230 V / 1 Ph / 50 Hz Stromverbrauch (max.) 2.6 kW Nennstromstärke (max.) 11.7 A Masse (B x T x H) 1410 x 365 x 860 mm Gewicht 130 kg Garantie 2 Jahre

Learn more More Fewer

The energy-efficient and quiet powerful dehumidifiers of the CDF series are ideal for preserving and protecting your valuables from moisture damage. They are suitable for regulating humidity in workshops, warehouses, museums, churches, archives, and waterworks. Important functions Modern Design Low noise level Low power consumption Integrated control of humidity and temperature BMS Communication (Modbus RTU) Built into a strong and robust powder-coated and galvanized sheet metal housing Evaporator and condenser coils epoxy-coated for maximum corrosion resistance  Controls Integrated electronic hygrostat and thermostat Integrated ON/OFF control of humidity and temperature (electric or hot water heating register as an accessory) 230 V for control valve, exhaust fan, and pump/boiler RS485 for Modbus communication  Suitable for Archiving and Storage Storage of classic cars commercial building emergency services Food and beverages Industry, factories and production cultural heritage Leisure and Recreation Defense and Aerospace museums and galleries Pharmacy and Science residential buildings Transport and Logistics Warehouses and Storage waterworks Technical data Specifications units CDF 70 Operating temperature range °C

Learn more More Fewer