The DH25 is a powerful dehumidifier that is ideal for medium-sized rooms and environments with high humidity levels. It impresses with its reliable dehumidification performance in both cool and temperate spaces. As an evolution of the FDK44 model, it offers digital control and a slightly increased dehumidification capacity.OperationOperation is incredibly simple: The desired target humidity is set on the control panel. If the measured humidity exceeds the set value, the dehumidifier automatically starts operating; otherwise, it pauses. The display always shows the current room humidity. The DH25 unleashes its full dehumidification power especially for year-round drying of single or double garages, archives, basements, or for stabilizing humidity in laundry and drying rooms. Thanks to its highly advanced hot gas defrosting, the DH25 can be used down to just above freezing point. Its efficient dehumidification performance in low humidity ranges, where other dehumidifiers can no longer extract moisture from the air, is particularly noteworthy. The room air is drawn in from one side of the housing and cleaned through an industrial, reusable filter. The dried air is blown into the room from the opposite side, creating effective air circulation. The setup of the DH25 is flexible: it can be placed both on the floor and on a free shelf, with the wheels being lockable for a secure stand. The condensate is drained directly via a hose connection. It is important that the hose has a constant slope towards the drain to ensure smooth drainage. The DH25 is characterized by its solid and high-quality construction. The housing is made of white powder-coated metal, while the internal components meet professional standards. This allows for uninterrupted continuous operation without supervision. Even after a power failure, the dehumidifier resumes operation with the previous settings, making it ideal for use with timers or smart home systems. For easy mobility, the DH25 is equipped with four sturdy wheels (with brakes) and two foldable carrying handles. Versatile application• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for continuous dehumidification of tempered but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +35°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 40 liters20°C/80% r.H.: 16 Liters20°C/60% r.H.: 12 Liters10°C/60% r.H.: 7 Liters(r.H.=relative humidity)   Optional accessoriesThe delivery includes the ready-to-plug-in device. If needed, we offer various suitable accessories, such as:• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped away to a higher location)Stronger designThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Trotec DH25S Tension: 230V / 50Hz Power consumption:  max. 700W / 510W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 1 m distance 53 dB(A)2.5 m distance 51 dB(A) Dehumidification capacity: 40 liters/day (30°C / 80% r.H.)  Air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) Condensation tank: No tank / only hose connection possible Compressor:     Rotary compressor  Refrigerant:   R290 (152gr.) Dimensions (L/H/D):      580 x 455 x 350 mm (including wheels and carrying handles) Weight:    30 Kg Business closure: Digital Ambient temperature: 1°C ~ 35°C  Area of application: up to 100m² Swiss plug:  EU plug with Swiss fixed adapter, 5m cable Hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

Swiss version, suitable for three-pole 230V household sockets.  Quick and easy measurement of energy consumption "Which electrical device in the office or household consumes how much energy?" With a minimal possible power display of 0.1 W, this measuring device can track even the smallest energy wasters. This also allows for the detection of standby consumption in devices, meaning any potential consumption when turned off.  The application is incredibly simple: Plug the measuring device into the socket and connect the electrical consumer to be checked. You will immediately see its current energy consumption, optionally displayed as active power in watts, kWh, price, or costs per kWh.   Check your electrical devices using this measuring device, such as TV and HiFi systems, LCD televisions, amplifiers, DVD players, video recorders, computers, servers, refrigerators, freezers, washing machines, dryers, air conditioners, heaters, floor lamps, standing lamps, background and display lighting, machines, etc..  Advantages at a Glance  • Quick and easy measurement of energy requirements• Power consumption display in watts, kWh, or costs• Optimal price-performance ratio • Minimal possible power display 0.1 W • Puffer capacitor for storing the selected settings  • Display of standby consumption starting from 0.1 W - this is not possible with many competing products. • Display of the current power consumption of one or more devices • Display of the costs of the consumed energy within a specific period (electricity price must be recorded once)• Connection of a multiple socket with several devices possible• Easily readable and easy to understand LCD display  • Power failure protected• Swiss version - no conversion or adapter required  Technical data  Measuring range Total power consumption momentary current consumption  0.1 - 9999 kWh 0.1 - 2300 Watt (max. 10A) accuracy ± 2 % voltage / frequency 230V / 50-60 Hz (= household socket) Advertisement LCD memory yes, recording capacity 9999.9 hours. Messkreis category CAT II (2500V) Conformity / Safety EN 61010-1, EN 61326-1, Pollution Degree 2 Protection class IP20 Ambient temperature 5 - 40 °C ambient humidity max. 85 % r.F. Dimensions (H x W x D)  95 x 51 x 70 mm Weight 100 g Trotec article no. 3510205916 guarantee 2 years

Learn more More Fewer

This powerful axial fan, combined with thoughtful accessories, offers a versatile solution for numerous applications. It is ideally suited for ventilation, air circulation, and dust extraction, for both cold and warm air. For transport over longer distances, various air transport hoses are available, while dust bags effectively capture dirt in enclosed spaces. Thanks to the variable accessory modules, you only need this one fan to perform a variety of tasks that you would have previously needed multiple devices for. This high-performance fan, like all models in the TTV series, has been specifically designed for use in the toughest conditions. Its robust construction and high reliability ensure a long service life, even in material-intensive continuous operation at varying locations. The powerful blower enables strong and large-volume air circulation, which leads to accelerated evaporation. The higher the flow velocity at the material surface, the faster the drying process occurs. By combining the dryer and blower, the drying time can be reduced by up to 50%, depending on the design. A versatile adapter for numerous applications: The hose adapter can be attached to the fan on both sides to optionally realize suction or ventilation. Additionally, by using two hose adapters, the combined use of air transport hose and dust bag for effective suction of dirt particles is possible.   Protection from dust during renovation work   During renovation work, material processing, and disposal, a lot of dust is inevitably generated. Therefore, protect yourself and your employees from hazardous fine dust while working. A proven alternative to reduce dust exposure is the extraction of dirt and dust particles. The washable Trotec dust bags have a permeability of max.     Advantages at a Glance   • Extremely robust for professional continuous use even under the harshest conditions• Spray water protected (IP55)• Space-saving stackable for transport and storage• Suitable hose adapter available: The optional attachment allows for the connection of air transport hose or dust bag, e.g. for the extraction of dirt particles.     Technical data   Air volume max. 5300 m³ / Std. (free blowing) Ventilator Axial Fan speeds 3 Air speed 11 m/s (= 39.6 km/h) Throwing distance outside 15 mwithin 50 m Air pressure 80 Pa (at highest level) Funding temperature max. 45 °C Mains connection 230 V, 50 Hz Nominal current consumption 1.1 A Power consumption 250 W Insurance 10 A Cable + plug 3m, EU plug with Swiss fixed adapter Protection class IP55 Operating noise 53 dB(A) at a distance of 3m hose connection Diameter 450 mm Dimensions H x W x D 520 x 515 x 358 mm Weight 14.5 kg Trotec article no. 1.510.000.010 Guarantee 2 years  

Learn more More Fewer

Proven UV dye for pipe break detection, available in various colors. This dispersion is water-dilutable. In the visible wavelength range, it leaves virtually no detectable traces, whereas when exposed to UV light, it glows intensely.  The product is particularly well suited for leak tests on water-bearing surfaces of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent substance can be detected and made visible under UV light.  Further applications can be found in non-destructive testing (NDT) as well as in leak detection, when capillarity is of secondary importance and no visible traces of the UV tracer should remain.  "So that users can have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, it is now also available in red, blue, and purple."  Important: Luminat is not suitable as a food coloring.  scope of delivery 1 bottle with 1 liter of red dye  Advantages at a Glance • Proven UV tracer for pipe break detection • No metabolism – optimal for long-term studies • Very intense color luminescence under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100 % formaldehyde-free fluorescent dye, made in Germany• Available in various colors – for every environmental condition and preference

Learn more More Fewer

This user-friendly set is ideal for precise leak testing and leak detection. Leaky spots are quickly and easily located by blowing in smoke, as the smoke escapes at the leak points and is visually detectable. Thanks to its compact and lightweight aluminum construction, the set is easy to transport and ready for use immediately. The innovative canister holder can be unlocked and unfolded on-site in seconds, thereby increasing the footprint and ensuring high stability even on uneven surfaces such as gravel flat roofs. "For optimal fog generation, both the powerful turbine and the fluid pump can be continuously regulated in their performance and precisely adapted to the respective operating conditions. The intelligent power coupling of the turbine, heating, and pump ensures a consistently dense fog flow for minutes, even at maximum turbine output, without interruptions caused by reheating." The fluid consumption of the FS200 is remarkably low, amounting to a maximum of only 100 ml per minute.Advantages at a Glance• Robust aluminum lightweight construction – therefore more than 40% lighter and smaller than the predecessor model• Extremely powerful blower turbine – infinitely adjustable• Space-saving integral solution with foldable canister holder• Extra dense white smoke thanks to infinitely adjustable fluid pump• Conveniently transportable even through narrow passages such as safety ladders• Intelligent performance coupling of turbine, heating, and pump for consistently dense fog generation for minutes without interruptions due to reheating.• Service-friendly design – easy filter change in seconds• Professional quality "made in Germany" – Original Trotec manufacturing     Technical data   Fog Time at Maximum Level approx. 210 s Fog time at intermediate level and below Persistent fog Evaporator performance 1500 W Turbine power blower 1600 W Maximum power consumption 3100 W Protection class IP54 Air delivery volume approx. 68 l/s (245 m³/h) Fluid consumption at max. output 100 ml/min Fluid consumption in continuous fog 30 ml/min Heating time about 7 minutes Connection voltage 230 V / 50 Hz Dimensions (L x W x H) 270 x 250 x 275 mm Weight (without 5-liter fluid canister) 12.5 kg Trotec article no. 3.510.010.021 Guarantee 2 years     The FS200 includes a 38 mm connection nozzle, a 5-liter canister of branded fog concentrate FluiTect, a filling hose with coupling plugs, and 5 meters of fog hose (Tronect PV-A 38).

Learn more More Fewer

This sensor is an electronic moisture indicator that non-destructively measures the capacitive moisture in solid materials such as walls, floors, or ceilings up to about 3-4 cm deep. The measuring device is ready for use immediately, can be easily connected with the app, and allows you to quickly and easily locate surface moisture distributions. "Not only is the quick indication of various surface moisture values possible, but this sensor is also particularly well-suited for the preliminary assessment of the readiness of building materials in CM measurements."  Extended evaluation and functionality thanks to the app Compared to non-app-supported moisture measuring devices, users of this device benefit from numerous additional advantages in terms of flexibility, analysis functions, data control, and documentation with the free app "Multimeasure Mobile." Compare different moisture measurements of an object, which were taken at different times, directly in the app. Or use the measurement values in combination for differentiated analyses directly on site. Useful additional features such as the alarm function, the export of moisture measurement values to further analysis software, and the creation of a report complete the universal application possibilities of the BM31WP and make this measuring device a valuable tool in the field of structural diagnostic tasks. With the MultiMeasure Mobile App, not only can the MIN, MAX, and average values be displayed automatically or individual measurement values marked directly in an image, but also elaborate graphical representations in the form of a photo-linked moisture matrix can be created, saved, and sent. The grid to be measured can be overlaid with a real image and later output as an overlay graphic with the moisture matrix for documentation – for example, for your measurement report, which you can generate and send directly on-site from the app.  What is an AppSensor? Trotec appSensors are compact precision measuring devices with high-quality sensors, designed to save energy and space, and do not have evaluation electronics or display units, as operation and data evaluation of the devices are almost entirely handled via the connected smartphone. In conjunction with the freely available app "MultiMeasure Mobile," this measuring device concept can convince with many advantages.   App "Multimeasure Mobile" "MultiMeasure Mobile" offers a variety of advantages for you: • Auto-detection for appSensors• Parallel operation of multiple appSensors• Quick and intuitive navigation• Measurement display numeric or as diagram / matrix• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud   Your mobile device becomes a multifunctional measurement data manager. All app sensors are automatically recognized and can be connected and read via Bluetooth with the app. The operation is as simple and intuitive as the installation.    Advantages at a Glance • Quick and non-destructive indication of moisture distributions in near-surface areas• Useful pre-testing device for CM measurements• Professional sensor technology for precise measurement results• Easy app connection via Bluetooth with optical connection confirmation via LED on the device• Wireless measurement device control and data display via app• Simple measurement data collection even at remote locations, as the values do not need to be read directly from the measuring device.• Additional determination and display of minimum value, maximum value, or average value• Measurement holding, logging and alarm function• Wrist strap for secure handling included• Automatic switch-off Trotec appSensors house professional sensors for precise measurement results, specifically developed for this purpose. Therefore, for professional measurements, use the clever combination of appSensor and MultiMeasure Mobile – the free app available for iOS and Android.  scope of delivery  • measuring device• Batteries• Hand strap• User manual     Technical data   Measuring range 0 - 100 Digits resolution 0.1 Digit Messprinzip dielectric / capacitive Ambient temperature 0 °C to 50 °C ambient humidity 10 - 90 % r.H. (Storage: max. 80% r.H.) Bluetooth 4.0 (BLE), max. 10 m transmission range in open area Masse (L x B x H) 160 x 36 x 22 mm Weight 93 g Trotec article no. 3.510.206.031 guarantee 2 years      

Learn more More Fewer

Proven UV dye for pipe break detection, available in various colors. This dispersion is water-dilutable. In the visible wavelength range, it leaves virtually no detectable traces, whereas when exposed to UV light, it glows intensely.  The product is particularly well suited for leak tests on water-bearing surfaces of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent substance can be detected and made visible under UV light.  Further applications can be found in non-destructive testing (NDT) as well as in leak detection, when capillarity is of secondary importance and no visible traces of the UV tracer should remain.  "So that users can have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, it is now also available in red, blue, and purple."  Important: Luminat is not suitable as a food coloring.  scope of delivery 1 bottle with 1 liter of blue dye  Advantages at a Glance • Proven UV tracer for pipe break detection • No metabolism – optimal for long-term studies • Very intense color luminescence under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100 % formaldehyde-free fluorescent dye, made in Germany• Available in various colors – for every environmental condition and preference

Learn more More Fewer

The universal all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 170S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely needs servicing, and is very affordable considering its power and quality.".     Easy handling   "Using a mechanical hygrometer, the desired target humidity can be continuously adjusted between 32 - 100%, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 580 cubic meters per hour. With its stable cart construction and large wheels, frequent relocation to different usage sites can be easily carried out."     Bucket, direct hose connection and optional pump kit   The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards.   "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in areas above 40% humidity. Technically, the dryer can also be used in lower ranges down to about 5°C, even in unattended continuous operation.     Optional counters   The delivery includes no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)   Technical data  dehumidification performance at 30 °C / 80 % r.H. 40 liters / day air volume 580 m³/ h Maximum room size 100 m² (250 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.8 A Power consumption max. 600W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 540 x 490 x 963 mm (incl. guide bracket) Weight 32 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 12 mm Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

Reliable dehumidifier with solid drying performance This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower-lying drain. The hose must be laid with a downward slope, as no pump is included in the device.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 2-3 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concern.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off•  Hot gas defrosting: faster automatic self-defrosting in cooler environments.   Technical data  dehumidification performance at 30 °C / 80 % r.H. 25 liters / day air volume 215 m³/ h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.4 A Power consumption max. 570W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The Trotec Axial Fan TTV 7000 is a powerful professional fan for intensive air circulation, ventilation, and technical drying applications. With a maximum air output of 8,500 m³/h, three fan stages, and robust industrial design, the device is ideal for construction sites, commercial use, industry, and water damage restoration. Powerful Axial Fan for Professional Applications The TTV 7000 was developed for reliable continuous operation under demanding conditions. The high air flow rate supports rapid air circulation and improves the efficiency of dehumidifiers, heaters, and construction dryers. Thanks to the three fan stages, the air performance can be flexibly adjusted to the respective application. The fan is suitable for both free air circulation and for connecting air transport hoses or dust bags with optional accessories. High Air Output: With up to 8,500 m³/h, the TTV 7000 ensures efficient air movement in large rooms and work areas. Professional Construction: The robust construction with IP55 protection enables reliable use even under difficult conditions. Robust, Stackable, and Versatile The TTV 7000 was specially developed for professional users. The sturdy housing, compact design, and stacking function enable easy transport and space-saving storage. Thanks to the optionally available hose adapter, the airflow can be directed precisely. This makes the device particularly suitable for construction drying, water damage restoration, and industrial ventilation tasks. Your Advantages at a Glance Maximum air output up to 8,500 m³/h Three fan stages High air outlet speed of 39.6 km/h Robust axial fan for professional applications Splash-proof according to IP55 Suitable for continuous operation Space-saving stackable Optional connection of air hose or dust bag possible Ideal for construction and water damage remediation Effective support for drying processes Mobile and easy to transport 2-year warranty Technical Data Air Output & Performance Fan Type Axial Fan Air Volume Stage 1 3,800 m³/h Air Volume Stage 2 5,600 m³/h Air Volume Stage 3 8,500 m³/h Max. Air Volume 8,500 m³/h Fan Stages 3 Air Outlet Speed 39.6 km/h Max. Air Pressure 100 Pa Max. Conveyed Medium Temperature 45 °C Hose Connection Ø 560 mm Electrical Data Mains Connection 230 V / 50 Hz, EU plug with fixed adapter for Switzerland Power Consumption 0.41 kW Current Consumption 1.8 A Protection Class IP55 Safety Class I Connection Cable 2.5 m Features & Use Housing Robust industrial design made of plastic Motor Powerful electric motor with thermal overload protection Impeller Axial impeller for high air flow rate Mobility Integrated carrying handle Stacking Function Multiple devices stackable for space-saving storage Areas of Application Construction drying, water damage restoration, ventilation, industry, commercial, and storage areas Accessories Optional hose adapter for targeted airflow available Dimensions & Construction Housing Material Robust plastic housing for professional use Motor Powerful electric motor with thermal overload protection Mobility Integrated carrying handle for easy transport Sound Pressure Level (3 m distance) 58 dB(A) Permissible Ambient Temperature -25 °C to +45 °C Dimensions (L × W × H) 365 × 620 × 620 mm Weight 18.5 kg Trotec Item No. 1.510.000.030 Warranty 2 years Areas of Application The Trotec TTV 7000 is a versatile professional axial fan for rapid air circulation in various application areas. Especially in construction drying and water damage restoration, the device supports efficient drying in combination with dehumidifiers and heaters. Due to its high air output, three fan stages, and robust design, the fan is ideal for craftsmen, restoration companies, industrial and commercial applications. The optional hose connection allows targeted airflow even in hard-to-reach areas. Professional Air Conveyance for Demanding Applications The TTV 7000 combines high performance, compact dimensions, and easy handling. Its stackable design, low energy consumption, and robust construction make it a reliable tool for daily professional use.

Learn more More Fewer

The compact TFV 30 S turbo fan for drying professionals is the ideal equipment for drying construction sites, water damage, and carpets. It is characterized by its flexible application and extremely robust construction. Designed as a universal solution for renovation, cleaning, and craft businesses, it combines high performance with compact dimensions. Flexibility and Additional Functions Three Setup Angles: The device can be operated flexibly in three different positions (0°, 45°, or 90°). The sophisticated housing design guarantees an absolutely secure and vibration-free stand in any orientation. Integrated Service Socket: A special comfort feature is the EU socket integrated directly on the control panel. It allows for uncomplicated power supply to another device or the direct connection of multiple fans. Practical Advantages Indestructible polyethylene housing – particularly lightweight and robust Double-flow radial fans with an extra-large special shaft Maximum stability: All internal mechanical components are made entirely of metal Durable motor with quality ball bearings to protect against one-sided load High energy efficiency: Enormous performance with economical consumption Ready for connection with EU plug and matching Swiss fixed adapter Technical Data & Performance Levels Overview of Operating Levels Level Air Volume Max. Air Pressure Sound Level (3m) Consumption Level 1 1,350 m³/h 370 Pa 73.5 dB(A) 0.71 kW Level 2 1,880 m³/h 400 Pa 80.8 dB(A) 0.78 kW Level 3 2,250 m³/h 525 Pa 86.2 dB(A) 1.05 kW Specifications & Connection Values Maximum Conveying Medium Temperature 60 °C Nominal Voltage / Current Consumption 230 V / 5.2 A Power Connection EU plug with Swiss fixed adapter Dimensions (L x W x H) 545 x 515 x 490 mm Weight 16.5 kg Warranty 2 years Note on accessories: An optional 3-way distributor and suitable air hoses are available as accessories and are not included in the standard delivery.

Learn more More Fewer

Large Brune B 600 Humidifier for Professional Mobile Humidification. The B 600 meets professional requirements for maintaining constant climatic conditions and is considered a top model on the market due to its structured design, the high-quality materials used, and its high performance. Thanks to the availability of various model variants, the B 600 can be used flexibly for diverse application profiles. The basic version offered here is characterized by easy handling and low installation effort.  Technical Features and Scope of Functions I. Operation and Efficiency Powerful EC radial fan with 8-stage automatic operation. Automatic comfort humidification for rooms up to 1000 m³ volume. Can be operated with conventional tap water or treated water. Large water tank (50 litres). Designed for economical operation. II. Control and Maintenance Clear touch display for showing humidity, temperature and maintenance instructions. Standard WLAN module for remote monitoring and control via app. Self-diagnosis system with warning display for malfunctions. Modular design for easier maintenance and care. III. Quality and Safety High-quality, UV-resistant plastics, stainless steel shafts and ball bearings. Safety glass cover with damper lowering. PIN protection against unauthorized access. No limescale deposits on furnishings. IV. Mobility and Flexibility Immediately ready for operation without fixed installation. Equipped with castors for easy relocation. Safe transport due to anti-spill protection. Special functions and options: Air Purification Mode: In summer operation, the humidification function can be deactivated; pre-filtration of air by coarse (G2) and fine dust filters (F7). Optional activated carbon purification filter. Hygiene (optional): Reduction of germ formation through UV sterilization and limescale conversion. Water Connection (optional): Direct connection to the water mains possible. Areas of Application and Benefits The use of professional mobile humidifiers is important for optimal indoor air humidity in various environments: Health Protection: Reduction of the risk of infection with pathogens in public and business areas through optimized air humidity. Preservation of Value: Protection of sensitive exhibits, historical writings and objects (wood, paper, canvases) from material damage (cracks, fractures) and minimization of dust deposits. Productivity: Creation of an ideal indoor climate to promote performance in the workplace. Technical Data Trotec Article No. 1160000600 Dimensions without packaging L x W x H 390 mm x 850 mm x 630 mm Weight without packaging 28 kg Device Type Evaporation Fan Type Radial Recommended Room Size 420 m² / 1000 m³ Water Tank Capacity 50 litres Transport Wheels Yes Air Volume Flow max. 900 m³/h Fan Speeds 8 Evaporation Performance (at 25 °C / 20 % r.F.) 64 l/24h Mains Connection and Frequency 220 - 240 V, 50/60 Hz Power Consumption 130 W Nominal Current Consumption 1 A Connection Plug CEE 7/7 with Swiss fixed adapter Maximum Water Pressure (with direct supply) 10 bar Control Hygrostat-controlled automatic operation (internal humidity sensor) Operation Programmable control unit, touch display with locking function Additional Functions Timer function Housing Material Plastic IP Protection Class IP54 Water Protection Protection against splashing water from all directions Protection against Foreign Bodies Protected against harmful quantities of dust Sound Level Min. 32 dB(A) / max. 58 dB(A) Included Filters Coarse dust filter G2, fine dust filter F7, evaporation filter Warranty 2 years

Learn more More Fewer

A reliable wall-mounted dehumidifier with an appealing design. A durable, corrosion-protected construction made of powder-coated, galvanized steel sheet ensures maximum reliability for this industrial condensate dryer and makes it particularly resistant to environmental influences thanks to its protective-coated heat exchanger. The combination of high efficiency and low-maintenance design makes the dryer ideally suited for fully automatic, hygrostat-controlled continuous drying applications in numerous fields of use, and thanks to its autonomous recirculation operation, it can also be easily integrated into any application environment afterwards. With its KTL-coated heat exchanger, it is also extremely resistant to environmental influences even in particularly reactive air environments with high salt, chlorine, or solvent content.    Hygrostat controlled and protection against manipulation The built-in hygrostat automatically regulates the humidity to an optimal level, where condensation, mold, or corrosion have no chance. The target humidity can be freely adjusted according to your needs. High efficiency is ensured by the quiet-running AC axial fan and the powerful compression refrigeration system.  The dry air supplied to the room is simultaneously heated for process technology, so that the use of conventional heating and ventilation energy can be reduced.     Thanks to high-quality hot gas automation, the dryer requires only very short defrosting phases. This is optimal, especially for dehumidifying unheated rooms, as it improves the performance and increases efficiency.  The controls are protected against unauthorized access, making this industrial dryer also the ideal dehumidifier for public buildings, staff and changing rooms, or museums.    Wide range of applications In wall operation, the device can be used for a variety of applications, for example:  • Humidity control in staff rooms, changing rooms, lounges, and break rooms• Drying of changing rooms, gyms, bike and ski cellars• Constant humidity conditions in garages, workshops, test benches, or production halls• Dehumidification in archives, collections, or libraries• Dehumidification of water engineering facilities and pumping stations to prevent condensate formation on pipes or pumps• Humidity control during the storage of natural products, for example for quality assurance in wood storage or during the storage of raw tobacco.• Corrosion prevention in electrical switchgear, boiler systems, turbines, and piping systems in power plants or during the storage of raw bodies and metal components.• Humidity control in data centers, control rooms, etc.• Moisture control in the food industry, for example in cheese production or confectionery manufacturing Due to the horizontally directed recirculation airflow and its compact design, the plug-and-play dehumidifier is particularly well suited for installation above door areas.  The condensate drawn from the air is directly drained through a downward laid hose. If the water needs to be drained to higher areas, please also consider our pump kits.  Advantages at a Glance • Professional quality, made in Germany• High dehumidification performance even at low temperatures• Corrosion-protected construction• Fully automatic operation• Professional hot gas defrosting automatic system• Quiet AC axial fan for horizontal recirculation airflow• Optimal suited for installation above door areas• Control elements installed protected from unauthorized access• Available optionally with condensate pump  Technical data  dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H.   11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C Moisture range technical  Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 657W Recommended Coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in the delivery operating noise   53 dB(A) at 1 m distance 49 dB(A) at a distance of 3 m Masse (B x H x T) 840 x 330 x 365 mm Weight 37 kg defrosting automatic Heissgas dehumidification automation mechanical hygrostat wheel, stepless Ventilator axial, single-stage blower prefilter and operating hour meter no Continuous operation possible and Display no memory function yes (set values remain mechanically fixed) Trotec article no. 1.125.000.111 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

"With these fittings, the air hoses are fixed in drill holes of floor slabs during the drying of water damage." • PVC, yellow• for 50 to 52 mm core hole drilling• suitable for air hoses with a 38mm inner diameter 1 piece = 10 pack Trotec Article No. 6.100.009.044

Learn more More Fewer

Trotec BC21WP Thermohygrometer with Smartphone Evaluation The Trotec BC21WP appSensor measures air temperature and relative humidity indoors. The readings are displayed and evaluated on a compatible smartphone or tablet via the free MultiMeasure Mobile app. Your Benefits Measurement of air temperature and relative humidity Calculation of dew point and critical dew point Determination of absolute and specific humidity Measurement display, recording, and evaluation via app Compact sensor solution for indoor climate and humidity checks Typical Applications The BC21WP is suitable for monitoring indoor climate, assessing ventilation needs, and supporting mold prevention and drying tasks. A compatible mobile device with the Trotec MultiMeasure Mobile app installed is required for use. Note: The device is intended for measuring indoor air temperature and humidity.

Learn more More Fewer

This color powder is visually recognizable without technical aids and is ideally suited for direct gradient or connection control in the detection of faulty or leaky connections and incorrect discharges from drainage systems. The productive marking dye can be mixed in water as a color solution in any desired color intensity, as the pure powder mixtures are completely free from dosage limits due to their extreme environmental compatibility. Further applications lie in tracer hydrology, for example for flow path verification, for visualizing the mixing and flow behavior in flowing waters, lakes, reservoirs, or water treatment plants, as well as for monitoring flow rates and flow velocities in fish ladders. "The Pure dye is also an ideal tool for simulated hazardous material visualizations during GSG exercises of the fire department.""Individually adjustable for every need" "Due to their 100% natural food-grade ingredients, the colorants of the Pure series can be dosed as desired - an overdose is not possible.""Depending on the desired intensity, 2 g of pure dye can be added per 1 to 5 liters of water, thus producing a pure dose of between 100 and 500 liters of color solution."  Advantages at a Glance • 100% natural, food grade• hypoallergenic, vegan, kosher and halal• 100% biodegradable• Safe for humans and animals• No impairment of water quality• No maximum dosage limits• Water-soluble powder - easy handling  composition Radish, apple, black currant, citric acid, and maltodextrin  Technical data  Masse (L x B x H) 70 x 70 x 165 mm Contents 200 g ingredients Radish, apple and black currant, citric acid and maltodextrin scope of delivery 1 Dose Trotec article no. 3.510.012.051

Learn more More Fewer

environmentally conscious   The Trotec liquid descaler consists of organic acids that can be 100% biologically decomposed.     active ingredient indicator   The striking pink color of the descaler is used to check the active ingredient. As soon as the color fades and starts to turn yellow, the liquid loses its descaling power.     Energy-saving   "A calcification causes electronic devices to require up to 30% more power to deliver the same performance as a non-calcified device. Therefore, clean your devices regularly to save energy. The Trotec liquid descaler helps you with that!"     quality product   The 100% biodegradable liquid descaler from Trotec is a quality product 'Made in Germany'. It is made on an amidosulfonic acid basis and contains maleic acid to prevent re-scaling.     Universal descaler for household appliances   The descaler with color indicator is suitable not only for cleaning the coffee machine/fully automatic coffee machine, but also for all other household appliances with a water tank, such as air conditioners, humidifiers, kettles, or steam irons.     Data   • Quality product, made in Germany• Naturally and Environmentally Friendly - 100% biodegradable• Content: 1000 ml• Safety lock/Child safety lock• Universally applicable: coffee machine, fully automatic coffee machine, espresso machine, air conditioning units, humidifiers, etc.• Suitable for devices from all appliance manufacturers• Mixing ratio: 0.5 liters of descaler for a 30-liter humidifier water tank.   "For further information, please refer to the descaling instructions of your device manufacturer."

Learn more More Fewer