The top dryer for medium-sized rooms and for rooms with high humidity levels. The FDK provides reliable dehumidification work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round dry storage of single or double garages, archive rooms, basement areas, or also for stabilizing humidity in laundry and drying rooms. You can only get this model from us; comparable products on the market are significantly more expensive.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK44 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 36 Liters20°C/80% r.H.: 18 Liters20°C/60% r.H.: 14 Liters10°C/60% r.H.: 8 Liters(r.H.=relative humidity) Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards)Stronger versionThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Fral Horizon FDK44 Tension: 230V / 50Hz Power consumption:  max. 780W / 530W (at 20°C/60% r.H.) Sound pressure level:  (our measurement) 1 m distance 53 dB(A) 2.5 m distance 51 dB(A) Dehumidification capacity: 36 liters/day (30°C / 80% r.H.)  air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) condensate tank: No tank / only hose connection possible Compressor:     Rotary compressor  refrigerant:   R410A (650gr.) Dimensions (L/H/D):      58 x 44 x 36 cm (including feet and carrying handles) Height without feet and carrying handles: 37 cm Weight:    34 Kg Business closure: Hygrostatrad Ambient temperature: 1°C ~ 35°C  Application area: up to 100m² Swiss plug:  Yes   hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

The DH25 is a powerful dehumidifier that is ideal for medium-sized rooms and environments with high humidity levels. It impresses with its reliable dehumidification performance in both cool and temperate spaces. As an evolution of the FDK44 model, it offers digital control and a slightly increased dehumidification capacity.OperationOperation is incredibly simple: The desired target humidity is set on the control panel. If the measured humidity exceeds the set value, the dehumidifier automatically starts operating; otherwise, it pauses. The display always shows the current room humidity. The DH25 unleashes its full dehumidification power especially for year-round drying of single or double garages, archives, basements, or for stabilizing humidity in laundry and drying rooms. Thanks to its highly advanced hot gas defrosting, the DH25 can be used down to just above freezing point. Its efficient dehumidification performance in low humidity ranges, where other dehumidifiers can no longer extract moisture from the air, is particularly noteworthy. The room air is drawn in from one side of the housing and cleaned through an industrial, reusable filter. The dried air is blown into the room from the opposite side, creating effective air circulation. The setup of the DH25 is flexible: it can be placed both on the floor and on a free shelf, with the wheels being lockable for a secure stand. The condensate is drained directly via a hose connection. It is important that the hose has a constant slope towards the drain to ensure smooth drainage. The DH25 is characterized by its solid and high-quality construction. The housing is made of white powder-coated metal, while the internal components meet professional standards. This allows for uninterrupted continuous operation without supervision. Even after a power failure, the dehumidifier resumes operation with the previous settings, making it ideal for use with timers or smart home systems. For easy mobility, the DH25 is equipped with four sturdy wheels (with brakes) and two foldable carrying handles. Versatile application• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for continuous dehumidification of tempered but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +35°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 40 liters20°C/80% r.H.: 16 Liters20°C/60% r.H.: 12 Liters10°C/60% r.H.: 7 Liters(r.H.=relative humidity)   Optional accessoriesThe delivery includes the ready-to-plug-in device. If needed, we offer various suitable accessories, such as:• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped away to a higher location)Stronger designThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Trotec DH25S Tension: 230V / 50Hz Power consumption:  max. 700W / 510W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 1 m distance 53 dB(A)2.5 m distance 51 dB(A) Dehumidification capacity: 40 liters/day (30°C / 80% r.H.)  Air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) Condensation tank: No tank / only hose connection possible Compressor:     Rotary compressor  Refrigerant:   R290 (152gr.) Dimensions (L/H/D):      580 x 455 x 350 mm (including wheels and carrying handles) Weight:    30 Kg Business closure: Digital Ambient temperature: 1°C ~ 35°C  Area of application: up to 100m² Swiss plug:  EU plug with Swiss fixed adapter, 5m cable Hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

A quiet dehumidifier for basements and bathrooms. Due to its horizontal format, the C12 clearly differs from other wall-mounted dehumidifiers, as it can be installed in places where other devices do not fit. For example, in the bathroom above the mirror cabinet, in basements above the door frame, or discreetly directly under the ceiling in basement passages. It is quiet, economical, and made with high-quality components from the professional league.   The humid room air is drawn in from the left side, and the dry air is blown out into the room at the front. A pull-out filter cleans the air of coarse dust. With a stepless hygrostat switch, the desired target humidity can be regulated. Once the target humidity is reached, the dryer pauses (the ventilation also stops) and resumes operation with unchanged settings when the humidity in the room rises again.The installation is very simple: a support rail is attached to the wall with two screws, and the dryer can then just be hung on it. The C12 does not have a bucket. This means that the extracted condensate must be drained away through a hose (12 mm inner diameter) into a nearby sink, into the bathtub, or into a siphoned drain below.Properties & Advantages• Stepless hygrostat for regulating the desired humidity.• Automatic function, i.e. the device switches off automatically after reaching the target humidity level and also switches on automatically when it becomes more humid (including a +/- 5% energy-saving function, so that the device does not constantly turn on and off.• The ventilation also stops when the set humidity is reached.• Suitable for unattended operation and for continuous use.• Power consumption of only max. 205 watts (at 20 °C / 60 % humidity: 150 W).• Equipped with a very reliable quality brand compressor.• No interruptions during power failure (device continues from where it was interrupted), therefore also suitable for operation with a timer.• Direct hose connection for continuous drainage of condensate.• Operating warning light.• Maintenance-free / no separate or additional coolant is required (closed circuit).• Simple wall mounting on support rail (included in delivery).• Elegant design, metal housing, white powder-coated.• Quiet operation (comparable to bathroom exhaust fan).• CFC free and compliance with WEEE standards.• CE compliant.    usage examplesBasement moisture: Ideal for damp basements, basement passages in single-family and multi-family homes, archives, and for keeping laundry rooms dry (f'For active laundry drying, the C12 is too weak; however, it is certainly capable of stabilizing general humidity in laundry rooms.)'Bathroom: Fits space-saving over doors or over mirror cabinetsdehumidification performanceThe dryer is designed for at least lightly tempered rooms between +8°C and +32°C. As with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 10 °C / 80% r.H.: 4.0 liters / 24 h (60 %: 1.6 liters)15 °C / 80% r.H.: 4.8 liters / 24 h (60 %: 2.4 liters)20 °C / 80% r.H.: 5.6 liters / 24 h (60 %: 4.0 liters)25 °C / 80% r.H.: 8.0 liters / 24 h (60 %: 5.6 liters)30 °C / 80% r.H.: 12 liters / 24 h(r.F. = relative humidity)scope of delivery• Plug-and-play device• Carrier rail with screws / dowels• 2 m condensate water hose 12 mmMontage"Upon request, we will professionally install the dryer at your home - price on request."   Technical data  Tension 220V-240V / 50Hz Power consumption 150 W at 20 °C / 60% r.H. (max. 205 W) Sound pressure level 2.5 m distance 44 dB(A) (our measurement) dehumidification performance max. 12 liters/day (30 °C / 80% r.H.)  condensate tank direct hose connection 12 mm, no bucket Compressor Rotary compressor refrigerant R134A Dimensions (H/W/D)    32 x 70 x 23 cm (case)35.5 x 71 x 23 cm (including rotary switch + hose connection) Weight 24.3 Kg cessation of operations Hygrostatrad   Ambient temperature 8 °C ~ 35 °C  Area of application bus ca. 30 m² Swiss plug Yes   hose connection Yes / Hose with 12 mm inner diameter Defrost electronic guarantee 2 years

Learn more More Fewer

The top dryer for larger spaces. The FDK performs reliable heavy-duty work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round drying of garages, industrial halls, or in water management facilities. You can only get this model from us; comparable products on the market cost twice as much.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% r.H.: 80 liters / 24 h20°C/80% r.H.: 45 liters / 24 h20°C/60% r.H.: 30 liters / 24 h10°C/60% r.H.: 18 Liters / 24 h(r.H.=relative humidity)Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards) Smaller versionThe device is also available in the smaller version "FDK44" -> DetailsComparable devices: Lunor L75     Technical data  Tension 230V / 50Hz Power consumption 1020W (at 20°C/60% r.H.), max. 1550W Sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% r.H.)  amount of recirculated air 1100 m³/h (installed, free-blowing approx. 1350 m³/h) condensate tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R410A Dimensions (L x H x D)  73 x 58 x 58 cm Weight 48 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C  Area of application bis 250m²/1000m³ Swiss plug Yes   hose connection Yes guarantee 2 years      

Learn more More Fewer

High-quality dehumidifier for space-saving wall mounting, ideal for up to 30m². It is compact, quiet, and economical. Its high-quality stainless steel housing combines aesthetic demands with a long lifespan.  A special feature of this dehumidifier is the slanted louvers. They allow the air to be released at the front of the device without drafts. This guarantees quiet operation with a noise level of only 46 dB. The air intake is located on the left side via an easily removable air filter, and the outlet of the dry air is on the front side. "In particular, in busy areas such as changing rooms and wellness areas, smaller fitness rooms, etc., the low noise level and draft-free air circulation are of great advantage."In contrast to the AD110 model, the 110P features a built-in pump that can discharge the condensate upwards and outwards, for example into a sink, into a higher or further away drain.The new digital control is easy to understand and displays the temperature, actual and target humidity, as well as the operating hours digitally.The assembly is quite simple: a support rail is screwed to the wall, and the dryer itself can then be easily hung in it. Rail, screws, and dowels are already included in the delivery.   latest technologyThanks to the latest technology, it is highly efficient and economical. The refrigerant R1234rf has minimal environmental impact. Thus, the "Global Warming Potential (GWP)" is an incredible value of 4, which corresponds to a reduction of 99.5% compared to comparable models from previous generations.  Characteristics Compact and space-saving Incl. wall mount Automatic pump with overflow protection New, environmentally friendly refrigerant Edelstahlhaube BlueDry technology for particularly energy-saving operation – even at low humidity and temperatures. Intelligent e-Dry Control operating hour meter Display of target and actual moisture For corporate clients: available upon request with a robust plastic housing in a color of your choice and with company logo, quantities and price upon request.  Dehumidification performance / Power consumption at 30°C / 80% r.H. = 15 liters/day / 330 wattsat 20°C / 60% r.H. = 8.5 liters/day / 236 wattsat 15°C / 70% r.H. = 8 liters/day / 215 watts    Technical data   Tension 230 V / 50 Hz Power consumption max. 330W or 236W at 20°C/60% r.H. operating noise 1 m distance 46 dB(A) (our measurement) dehumidification performance 15 liters/day (30°C / 80% r.H.) amount of recirculated air 225 m³/h condensate tank integrated condensate pump, no tank hose connection Yes, 3m mounted on the device (12mm inner diameter) refrigerant R1234yf Weight 18.5 kg Masse (H x B x T) 49 x 33 x 28 cm cessation of operations Digital Ambient temperature 3°C ~ 32°C Plug Cable with Swiss plug T12 Area of application up to 30m² / 70m³ (temperature-controlled rooms) Ambient temperature 3°C ~ 32°C operating hour meter Yes Protection class IP54 guarantee 2 years

Learn more More Fewer

A reliable wall-mounted dehumidifier with an appealing design. A durable, corrosion-protected construction made of powder-coated, galvanized steel sheet ensures maximum reliability for this industrial condensate dryer and makes it particularly resistant to environmental influences thanks to its protective-coated heat exchanger. The combination of high efficiency and low-maintenance design makes the dryer ideally suited for fully automatic, hygrostat-controlled continuous drying applications in numerous fields of use, and thanks to its autonomous recirculation operation, it can also be easily integrated into any application environment afterwards. With its KTL-coated heat exchanger, it is also extremely resistant to environmental influences even in particularly reactive air environments with high salt, chlorine, or solvent content.    Hygrostat controlled and protection against manipulation The built-in hygrostat automatically regulates the humidity to an optimal level, where condensation, mold, or corrosion have no chance. The target humidity can be freely adjusted according to your needs. High efficiency is ensured by the quiet-running AC axial fan and the powerful compression refrigeration system.  The dry air supplied to the room is simultaneously heated for process technology, so that the use of conventional heating and ventilation energy can be reduced.     Thanks to high-quality hot gas automation, the dryer requires only very short defrosting phases. This is optimal, especially for dehumidifying unheated rooms, as it improves the performance and increases efficiency.  The controls are protected against unauthorized access, making this industrial dryer also the ideal dehumidifier for public buildings, staff and changing rooms, or museums.    Wide range of applications In wall operation, the device can be used for a variety of applications, for example:  • Humidity control in staff rooms, changing rooms, lounges, and break rooms• Drying of changing rooms, gyms, bike and ski cellars• Constant humidity conditions in garages, workshops, test benches, or production halls• Dehumidification in archives, collections, or libraries• Dehumidification of water engineering facilities and pumping stations to prevent condensate formation on pipes or pumps• Humidity control during the storage of natural products, for example for quality assurance in wood storage or during the storage of raw tobacco.• Corrosion prevention in electrical switchgear, boiler systems, turbines, and piping systems in power plants or during the storage of raw bodies and metal components.• Humidity control in data centers, control rooms, etc.• Moisture control in the food industry, for example in cheese production or confectionery manufacturing Due to the horizontally directed recirculation airflow and its compact design, the plug-and-play dehumidifier is particularly well suited for installation above door areas.  The condensate drawn from the air is directly drained through a downward laid hose. If the water needs to be drained to higher areas, please also consider our pump kits.  Advantages at a Glance • Professional quality, made in Germany• High dehumidification performance even at low temperatures• Corrosion-protected construction• Fully automatic operation• Professional hot gas defrosting automatic system• Quiet AC axial fan for horizontal recirculation airflow• Optimal suited for installation above door areas• Control elements installed protected from unauthorized access• Available optionally with condensate pump  Technical data  dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H.   11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C Moisture range technical  Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 657W Recommended Coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in the delivery operating noise   53 dB(A) at 1 m distance 49 dB(A) at a distance of 3 m Masse (B x H x T) 840 x 330 x 365 mm Weight 37 kg defrosting automatic Heissgas dehumidification automation mechanical hygrostat wheel, stepless Ventilator axial, single-stage blower prefilter and operating hour meter no Continuous operation possible and Display no memory function yes (set values remain mechanically fixed) Trotec article no. 1.125.000.111 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The compact wall-mounted dehumidifier DH 20 is ideal for effective humidity control in small commercial spaces and for drying damp basements and archive rooms. With its dehumidification capacity of up to 12.6 litres per day (at 20 °C and 60% relative humidity), it precisely keeps humidity under control. This effectively prevents mould formation and thus protects your premises and materials. Thanks to its elongated shape, the DH 20 also fits above door frames and wall cabinets. Features and BenefitsThis wall-mounted unit not only impresses with its robust construction and user-friendly design: Durability: The aluminium housing and cataphoretically coated heat exchangers offer high corrosion resistance, which also allows for use in swimming pools. Precise Humidity Control: An electronic hygrostat automatically regulates the humidity to the desired level. User-friendliness: The intuitive control panel and simple installation make handling the DH20 straightforward. Practical Water Drainage: Direct water drainage eliminates the need to empty a tank. The extracted condensate is directed into a nearby drain via a sloped hose.  Wall Mounting: The  Modern Design: The discreet and modern design blends seamlessly into any environment. Technical Data Specification Value Operating temperature range 5 - 40 °C Operating humidity range 40 - 80 % Airflow 375 m³/h Sound pressure level (at 1 m distance) 48 dB(A) Dehumidification capacity (30°C/80% r.h.) 30 L/24h Dehumidification capacity (20°C/60% r.h.) 12.6 L/24h Consumption (30°C/60% r.h.) 0.66 kWh/L Consumption (20°C/60% r.h.) 0.82 kWh/L Gas weight R290C/CO₂ equivalent 0.15 kg / 0.0005 t Voltage 230 V / 1 Ph / 50 Hz Power consumption (max.) 0.51 kW Rated current (max.) 2.3 A Dimensions (W x D x H) 900 x 350 x 365 mm Weight 33 kg Warranty 2 years

Learn more More Fewer

DH 35 – Compact Wall-Mounted Dehumidifier for Commercial Use & Small Swimming Pools This compact wall-mounted dehumidifier is ideal for effective humidity control in medium-sized commercial spaces, basements, archives, and smaller swimming pools. The DH 35 precisely controls humidity with a dehumidification capacity of up to 52 liters per day (at 30 °C / 80 % RH). This effectively prevents mold growth and reliably protects your premises and stored materials. Thanks to its space-saving wall mounting, the device blends unobtrusively into the room design. The condensate is discharged directly into a nearby drain via a sloped hose, eliminating the need for manual emptying. With its corrosion-resistant aluminum casing and cataphorically coated heat exchangers, this wall-mounted dehumidifier is extremely durable and well-suited even for the demanding conditions in swimming pools. Features: High corrosion resistance (also for swimming pools) Cataphorically coated heat exchangers Robust aluminum housing with modern design Electronic hygrostat for automatic control Direct condensate drainage (no bucket emptying) Space-saving wall mounting Intuitive and simple control panel Environmentally friendly refrigerant R290 Dehumidification Capacity & Consumption The DH 35 ensures consistently precise humidity control within an operating range of 5 °C to 40 °C: 30 °C / 80 % RH: 52.0 liters / 24h (Consumption: 0.72 kWh/L at 30 °C / 60 % RH) 20 °C / 60 % RH: 20.2 liters / 24h (Consumption: 0.83 kWh/L) Technical Data Voltage / Mains Connection 230 V / 1 Ph / 50 Hz Max. Power Consumption 1.0 kW (Nominal current max.: 4.3 A) Max. Dehumidification Capacity 52.0 liters / 24h (at 30 °C / 80 % RH) Dehumidification Capacity (20 °C / 60 % RH) 20.2 liters / 24h Air Flow Rate 500 m³/h Operating Temperature Range 5 °C to 40 °C Operating Humidity Range 40 % to 80 % RH Sound Pressure Level (at 1 m distance) 48 dB(A) Refrigerant / Fill Quantity R290 (0.5 kg / CO₂ equivalent: 0.074 t) Operation & Control Electronic hygrostat, intuitive control panel Condensate Drainage Direct water drainage (sloped hose installation) Mounting Type Wall mounting Dimensions (W × D × H) 885 × 265 × 720 mm Weight 50 kg Warranty 2 years

Learn more More Fewer

DH 120 Wall-Mounted Dehumidifier for Commercial Use, Basements, and Swimming Pools Powerful, compact wall-mounted dehumidifier for reliable moisture control in commercial spaces, archives, basements, and medium-sized swimming pools – maximum dehumidification performance, high energy efficiency, and reliable building protection. The DH 120 wall-mounted dehumidifier is a powerful device for professional moisture control in demanding indoor environments. It was specially developed for use in medium-sized commercial premises, damp basement areas, archive rooms, and small to medium-sized swimming pools. With an impressive dehumidification capacity of up to 150 litres per day (at 30 °C and 80 % r.h.), the DH 120 reliably ensures stable humidity and effectively prevents the formation of mould, condensation, and moisture-related structural damage. Continuous dehumidification not only protects buildings and materials but also preserves sensitive stored goods, archives, and technical installations in the long term. The robust wall-mounted unit combines high performance with a compact, functional design, making it ideal for permanent use in commercial and technical environments. Features: High dehumidification capacity up to 150 L/day Suitable for commercial use, basements, and swimming pools Robust aluminium casing Corrosion-protected heat exchangers Integrated electronic hygrostat Automatic humidity control 2-stage ventilation Direct condensate drain without tank Energy-efficient continuous operation Wall mounting for space-saving installation User-friendly operation Long service life in professional use Reliable moisture control for optimal indoor air quality The DH 120 ensures constant and precise regulation of humidity in demanding environments. Continuous dehumidification effectively prevents the formation of mould, corrosion, and condensation. This is particularly important in basements, archives, and commercial premises where sensitive materials, documents, or technical equipment are stored. In swimming pools, the DH 120 also contributes significantly to a stable and pleasant indoor climate. Controlled humidity not only protects the building structure but also significantly extends the lifespan of inventory and technical equipment. Efficient operation and economical dehumidification The DH 120 was developed for energy-efficient continuous operation. The powerful compressor and fan technology ensure high dehumidification performance with simultaneously optimized energy consumption. Thanks to modern control technology, the device only operates at full power when it is actually required. This reduces operating costs and ensures efficient energy use. The combination of high performance and economical operation makes the DH 120 ideal for professional applications with persistent humidity problems. Robust construction with high corrosion protection The aluminium casing and cataphorically coated heat exchangers ensure high resistance to moisture and corrosion. This makes the DH 120 suitable for demanding applications such as swimming pools or damp basements. The high-quality workmanship guarantees a long service life and reliable operation even under difficult environmental conditions. Space-saving wall mounting The DH 120 is designed as a wall-mounted unit, allowing for particularly space-saving installation. This is particularly advantageous in technical rooms, basements, or cramped commercial areas. Installation is simple and efficient, while the device can be discreetly integrated into the environment thanks to its functional design. Automatic humidity control The integrated electronic hygrostat continuously monitors the room air and automatically regulates operation. As soon as the set humidity is exceeded, the DH 120 activates itself. This ensures consistent air quality without the need for manual control. This increases comfort and provides reliable protection for the building structure. Efficient condensation principle The DH 120 operates according to the proven condensation principle. Humid room air is drawn in and passed over the evaporator, where it is cooled below the dew point. The moisture condenses and is safely drained away. The dried air is then passed over the condenser, reheated, and returned to the room. This creates an efficient cycle for continuous dehumidification. 2-stage ventilation for flexible adaptation The two-stage ventilation allows the air circulation to be adapted to the respective room conditions. Depending on the humidity level and room size, a choice can be made between two performance levels. This ensures maximum flexibility and optimal adaptation to different operating conditions. Typical applications Medium-sized commercial premises Damp basement areas Archive and storage rooms Medium-sized swimming pools Technical and ancillary rooms Material storage with humidity requirements Renovation and drying projects Why a professional dehumidifier is important Uncontrolled humidity leads to considerable damage in many buildings. Mould formation, material destruction, and corrosion are common consequences of high humidity. The DH 120 reliably prevents these problems, protects the building structure, and at the same time ensures a stable and healthy indoor climate. This makes it an economical and durable solution for professional applications. Advantages at a glance Very high dehumidification capacity up to 150 L/day Suitable for commercial use, basements, and swimming pools Robust aluminium industrial design Corrosion-protected heat exchangers Automatic humidity control 2-stage ventilation Direct condensate drain without tank Energy-efficient continuous operation Space-saving wall mounting Ideal for professional applications Technical Data Operating temperature range 5 – 40 °C Operating humidity range 40 – 80 % r.h. Air flow rate 800 / 1200 m³/h Sound pressure level 51 / 56 dB(A) Dehumidification 150 L / 24 h (30 °C / 80 % r.h.) Dehumidification (reference) 66 L / 24 h (20 °C / 60 % r.h.) Power consumption 2.6 kW Mains connection 230 V / 1 ph / 50 Hz Dimensions 1410 × 365 × 860 mm Weight 130 kg Warranty 2 years

Learn more More Fewer