These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.470

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.410

Learn more More Fewer

This condensate pump is suitable for the following Trotec dehumidifiers: • TTK125S• TTK175S• TTK355S• TTK655S• TKK500• TTK900MP The pump is inserted into the dehumidifier instead of the bucket and connected directly to the existing socket in the device. Compared to a standalone pump, this system has the advantage that, on the one hand, no additional power socket is required, and on the other hand, that the pump and dryer work together. This means that in the event of a pump failure, the dehumidifier also stops. The system is also suitable for unattended continuous operation. The delivery includes a connected 5 m drain hose, which can also be extended with a suitable adapter.  Trotec Article No. 6.100.003.030  

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.475

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 1100W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 1.09 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 4.8 A Power consumption max. 1.1 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without stand feet) Weight 9 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.018 Guarantee 2 years

Learn more More Fewer

A high-quality handheld device for determining moisture in soft building materials such as wood, gypsum, or plaster.  Ideal for measurement controls in forestry operations, sawmills, and all wood processing areas. Specifically designed for moisture measurement of wood materials, the device features a menu option that allows the selection of hundreds of different wood types. Additionally, numerous validated material curves are stored in the device software, which can be selected using the corresponding material numbers from the included wood species table. The wood species index, with over 170 pages, is arguably the most comprehensive material curve compendium on the market. The wood moisture value determined in real-time and the defined wood temperature are displayed simultaneously on the easily readable color display behind Blanview special glass during the measurement, which ensures a high-contrast measurement display even in sunlight. The moisture measuring device can be connected to the PC via a USB cable. With the optionally available MultiMeasure Studio software (available for free in the service/download area of trotec.de), the measured data can be transferred online and in real-time directly to the PC and saved for later analysis or reports. With the help of the online storage function, raster measurements can be carried out directly on the computer, such as in the case of measuring the moisture content of a basement wall to be tested.The standard delivery includes, in addition to the measuring device, two coupling nuts, ten measuring tips (length 20 mm, ø 1.5 mm), an electrode protection cap, batteries, an operating manual, and a 170-page wood species directory. Furthermore, you can significantly expand the device's range of applications with the optionally available TS adapter set and the TC 25 connection cable pair, allowing you to connect all electrodes from the MultiMeasure range.  Advantages at a Glance • Measuring device developed and manufactured in Germany according to the highest quality standards• Robust and high-quality two-component construction with protection class IP54• Easy-to-clean, continuous glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measurement values even in sunlight.• Capacitive Touch Control Panel• High-resolution color display for simultaneous display of two measurement values• Function for temperature compensation in wood moisture measurement• Integrated material characteristics for hundreds of different types of wood• Comprehensive material curve compendium including• Extended application spectrum through connection options for various moisture electrodes with optional TS adapter set• A suitable silicone protective cover for the device is included in the delivery.• Including measurement data management software MultiMeasure Studio (Download standard version)  Technical data  Measurement range construction moisture   0 to 100 digits Resolution: 0.1 Digit Measurement range wood moisture       Wood moisture: 0 to 100 M% Resolution: 0.1 M% Tolerance (based on the measurement principle): 0 to 5 M%: ± 0.8 M%; 5 to 30 M%: ± 0.2 M%; 30 to 100 M%: ± 0.1 M% operating temperature   0 °C to + 50 °C at Storage temperature   0 °C to + 60 °C at Battery 4 x Alkaline LR6 AA 1.5 V or NiMH batteries (> 2500 mAh) Optional energy supply 5 V USB Power consumption active approx. 80 mA passive approx. approx. 70 µA Battery life, active > 30 h Masse ((L x B x H) 174 x 63 x 35 mm battery type 2 x 1.5V, AAA Masse (L x B x H) 154 x 32 x 28 mm Weight approx. 300 g Trotec article no. 3.510.207.505 guarantee 2 years

Learn more More Fewer

A good air conditioner for cooling bedrooms, living rooms, or offices. Simply set your desired temperature in the range of 16°C to 31°C, and the device will automatically cool the room air to the set value. The extracted heat is expelled through an exhaust hose out of the window.  comfort functions With remote control, 24-hour timer, and automatic mode, this model offers you convenient control from your seat, pre-planned on or off switching, as well as self-cooling depending on the room temperature.  Ventilator function – with and without cooling Pure ventilation operation is also possible: a two-stage adjustable fan blower provides fresh air and gentle air circulation in the room with an air volume of up to 320 m³/h – even without activating the cooling compressor. The direction of the airflow can be manually adjusted with the horizontal air deflection flaps, so that the fresh breeze arrives exactly where you want it. In addition, the integrated air filter on the back of the unit filters lint, dust flakes, and pet hair from the room air – an advantage not only for allergy sufferers.  Simultaneous dehumidification of the room air In summer, not only the heat but often also a high humidity can be unpleasant. During the cooling process, this air conditioning unit removes up to 0.8 liters of water from the air per hour. This makes the indoor climate much more pleasant. Additionally, the integrated dehumidification function also prevents unhealthy mold formation. The water that is extracted from the air is evaporated directly outside through the exhaust hose along with the warm air. The internal collection container for residual water needs to be emptied very rarely, as it only has to catch the few drops that cannot be evaporated after the unit is turned off.  Mobile and flexible instead of drilling and plugging If you want to place the device in another room, it can be easily moved from one place to another with its smooth-rolling transport wheels. Unlike permanently installed air conditioning units, you can always use a mobile air conditioner exactly where cooling is needed – without drilling, screwing, or plugging. You just need to secure the exhaust hose included in the delivery in a window or door opening, and you can start cooling the room. "To prevent warm outside air from entering the room to be cooled through the slightly opened windows or doors, we offer window and door seals as optional accessories. This way, you can cool even more efficiently."  Tip for restful sleep If you want to fall asleep on warm summer nights with gentle cooling, you can set a timer to have the air conditioning unit turn off by itself after a while to prevent your body from getting too cold during the night.  Propane (R290) as an environmentally friendly refrigerant in air conditioning systems Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the atmosphere due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air conditioning unit makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thus further reducing your energy costs.  Advantages at a Glance • Suitable for rooms up to 24 m² / 60 m³• Energy efficiency class A• 2.6 kW cooling capacity• 3 operating modes: cooling, ventilation, dehumidification• 2 ventilation levels• Adjustable air outlet direction• Target value preselection in the range of 16°C to 31°C• Energy-saving operation through automatic switching off/on upon reaching/exceeding the target value• 24-hour timer• Remote control + intuitive LED display• Removable air filter against pet hair, lint, dust flakes• Quiet operation • Environmentally friendly refrigerant R290• Mobile air conditioners - Comfortable cooling machines  Why does it need an exhaust hose? Professional home air conditioning units are all compression refrigeration systems worldwide. And these generate both cold and heat equally - unchangeable physics. The generated cold is desired in the room, while the heat is not. Therefore, it must be expelled outside. In split units, it is automatically outside, as the heat is directly dissipated in the outdoor-installed condenser. Nevertheless, these units also require a connection line for the circulating refrigerant, which ensures the transport of cold. In monoblock construction, the heat is centralized in the device and must therefore be directed outside without mixing again with the indoor air and warming it up."For this purpose, at least one exhaust hose is absolutely necessary, which is therefore a standard component of every monoblock air conditioning unit available on the market, like this one, even if it is not directly visible in every application image."  Technical data  cooling capacity max. 2.6 kW (9000 Btu/h) Our recommendation room size   max. 24 m² or 60 m³ Room size specification manufacturer max. 34 m² or 85 m³ Minimum room size 9 m² fan speeds 2 Selectable room temperature 16 - 31 °C dehumidification performance 0.8 Liter / h Ambient temperature max. 35 °C power connection 220 - 240 V, 50 Hz Recording max. 1 kW rated current consumption 3.5 A Recommended Coverage 10 A cable / connector 1.8 m cable, EU plug with Swiss fixed adapter T12 refrigerant R290 (160g) GWP 3 Operating noise fan level 1   at a distance of 1 m 53 dB(A) at a distance of 3 m 49.5 dB(A) exhaust hose Ø 145 mm, Length 1.5 m Masse (H x B x T) 700 x 320 x 300 mm Weight 23.5 kg Trotec article no. 1.210.002.022 guarantee 2 years  

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.420

Learn more More Fewer

Der Trotec TTK99 HEPA ist ein perfekter Allrounder für Ihren Haushalt. Dieser designstarke Luftentfeuchter und Luftreiniger eignet sich optimal zur Trockenhaltung von feuchten Kellern, Garagen und Waschküchen sowie zur schnelleren Wäschetrocknung. Mit seinem Intensiv-Filter sorgt er gleichzeitig für eine effektive Luftreinigung – für ein trockenes und gesundes Raumklima. Raumluftqualität im Blick: Dank Air-Quality-Sensoren Der Trotec TTK99 HEPA reguliert nicht nur die Luftfeuchtigkeit (30–80%), sondern reinigt die Luft auch gleichzeitig. Während man der Raumluft ihre Belastung durch Krankheitserreger oder Schimmelpilzsporen nicht ansieht, erkennt der TTK 99 HEPA, was Ihnen verborgen bleibt. Seine digitalen Feuchtesensoren messen fortlaufend die Raumluftfeuchte. Eine praktische, vorderseitige Farb-LED-Anzeige informiert Sie über die aktuelle Raumluftqualität: Blau: Zu trocken Grün: Optimal Rot: Zu feucht Effektive Entfeuchtung für grosse Räume Mit einer Entfeuchtungsleistung von bis zu 31 Litern pro Tag eignet sich der TTK99 HEPA ideal zur Trockenhaltung von Räumen bis zu 90 m² (230 m³), wie Kellern, Garagen, Archiven oder Waschküchen. Beachten Sie, dass das Betriebsgeräusch in ruhigen Wohn- oder Schlafzimmern deutlich wahrnehmbar sein kann. Hierfür empfehlen wir den leiseren Dryfix Royal 24 aus unserem Sortiment. Bei Bedarf unterstützt der TTK 99 HEPA auch die Wäschetrocknung erheblich: In leicht temperierten Räumen kann er 1-2 Waschmaschinenfüllungen pro Tag trocknen. Leistungsstarke Luftreinigung mit HEPA-Filter Das zweifache Filtersystem des TTK99 HEPA mit Vorfilter und Intensiv-Filter (EPA-Filter Klasse E11) entfernt bis zu 95% der Schadstoffe aus der Luft, darunter Viren, Bakterien, Schimmelpilzsporen, Pollen, Hausstaub und Allergene. Dies gewährleistet eine ausgezeichnete Reinigungswirkung. Besonders Allergiker schätzen, dass beim Wäschetrocknen herumfliegende Pollen vom Filter abgefangen werden und so nicht in Kleidung oder Bettwäsche gelangen. Komfort und Benutzerfreundlichkeit Hygrostatgesteuerte Automatik: Stellen Sie die gewünschte Luftfeuchtigkeit ein, den Rest erledigt das Gerät. Vier Betriebsmodi: Wählen Sie flexibel zwischen Automatik, Dauerbetrieb, Wäschetrocknung und Nachtmodus. 24-Stunden-Timer: Programmieren Sie Ein- und Ausschaltzeiten präzise in 1-Stundenschritten. Kindersicherung: Schützt die Einstellungen vor ungewollten Veränderungen. Auto-Restart-Funktion: Das Gerät startet nach einem Stromausfall automatisch neu mit den zuvor gewählten Einstellungen (Memory-Funktion). Vorteile des Trotec TTK99 HEPA auf einen Blick: Kombinierter Luftentfeuchter mit Intensiv-Luftreiniger (95% Filtration von Bakterien, Viren, Pollen, Feinstaub, Milben, Schimmelpilzsporen und Allergenen) Hygrostatgesteuerte Entfeuchtungsautomatik (30–80% r.F.) Geeignet für Räume bis 90 m² / 230 m³ Entfeuchtungsleistung: max. 31 Liter / 24 Stunden Luftqualitätsanzeige mit Farb-LED Anzeige der relativen Luftfeuchtigkeit Permanentmodus für Dauerbetrieb Timerfunktion (1–24 Stunden) Auto-Restart-Funktion (Memory-Funktion) Kindersicherung Überlaufschutz und Warnsignal bei vollem Wasserbehälter Wassertank: ca. 4 Liter Zweistufiges Gebläse Anschlussmöglichkeit für Ablaufschlauch Wäschetrocknungsfunktion Lieferumfang TTK 99 HEPA Luftentfeuchter EPA Luftfilter (Kategorie E11) Vorfilter Schlauch für Kondensatablauf Trotec TTK99 HEPA: Technische Daten Entfeuchtungsleistung (30°C / 80% r.F.) 31 Liter / Tag Luftvolumen 170 m³/h Maximale Raumgrösse 90 m² (100 m³) Minimale Raumgrösse 4 m² Temperaturbereich 5 - 32°C Feuchtigkeitsbereich 35 - 100 % r.F. Stromspannung 220 - 240 V/50 Hz Nennstromaufnahme max. 3.38 A Leistungsaufnahme max. 720 W Empfohlene Absicherung 10 A Kabellänge ca. 1.8 m Stecker EU-Stecker mit Schweizer Fixadapter Kältemittel R290 (90g) GWP3 Wassereimer 4 Liter Betriebsgeräusch (1m / 2.5m Abstand) 51 dB(A) / 48 dB(A) Abmessungen (T x B x H) 250 x 370 x 585 mm Gewicht 17 kg Abtauautomatik Umluft, elektronisch Entfeuchtungsautomatik Hygrostatgesteuert Ventilator radial, 2 stufiges Gebläse Automatische Abschaltung bei vollem Eimer Ja Vorfilter Ja Timer Ja Dauerbetrieb möglich Ja Wäschetrocknungsmodus Ja Display Zeigt aktuelle/eingestellte Raumfeuchte Memory-Funktion Ja (speichert Einstellungen) Schlauchanschluss Ja, kurzes Schlauchstück im Lieferumfang Trotec Artikel. Nr. 1.120.000.103 Garantie 2 Jahre Dokumente / Downloads für den Trotec TTK99 HEPA Bedienungsanleitung Deutsch Bedienungsanleitung Französisch Bedienungsanleitung Italienisch

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.425

Learn more More Fewer

The large area humidifier B400 is a powerful cold evaporator with air washing function. It is comparatively quiet and compactly built, ensuring good humidity in dry living rooms, overheated offices, as well as storage rooms and workshops up to 250 m².Functional principleA humidification mat is pulled through the water bath by a wheel and absorbs moisture. This creates a moisture buildup in the device, which is released into the room air by a two-stage adjustable fan. This method is very effective in humidification performance, while particles in the air are captured on the humidification mat and deposited in the water bath. The air humidifier thus also cleans the air of airborne particles such as dust and pollen.serviceThe operation is incredibly simple. The humidifier has only two rotary switches:Operating switch: three-stage - OFF, fan level 1 or fan level 2Hygrostat switch: for stepless regulation of the desired target humidityTwo lights also indicate when the device is in operation and when the water tank is empty.The humidifier has a metal housing (white powder-coated), stands on 4 wheels, and is easy to move.VentilationThe ventilation is two-stage, the maximum air output is 500 m³, the operating noise is good on level 2, and only minimally perceptible on level 1. The three ventilation grilles at the air outlet can be easily adjusted either forward or backward.Consumables and MaintenanceThe water bath (pull-out drawer) serves to provide the necessary moisture on one hand, but on the other hand, it also collects the dirt that is removed from the air. Therefore, it should be completely emptied and cleaned once a week. The humidification wheel is clicked into the holder from above and can be easily removed for cleaning; the degree of contamination and thus the necessity for cleaning is visible from above.As with all evaporative coolers, it is also advisable to disinfect the water in the B400 to prevent germs and bacteria. For this purpose, the silver cubes (Ionic Silver Sticks) are suitable, which are available as consumables from us. The silver cubes should be replaced once per season; otherwise, no consumables are required for this device.scope of delivery• ready-to-use device  Technical data  Tension 230V/50Hz consumption max. fan speed 1 fan speed 2 Standby 53 Watt 31 Watt 45 Watt 0 operating noise (at a distance of 2.5m) Level 1: 44 dB(A) Level 2: 49 dB(A) circulating air level 2 500 m³/h humidification max. 60 liters / 24 h Room size max. 200 m² steering mechanically Weight 19 kg Mass (HxWxD) 74 x 63 x 34 cm guarantee  2 years

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.480

Learn more More Fewer

In vacuum insulation layer drying, the use of a class H13 particulate filter is highly recommended to protect against mineral fiber dust, mold spores, and allergens in the air. This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It has been specifically designed for use with Trotec water separators and compressors and is characterized by optimal filter performance as well as a high separation efficiency. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominal > 99.97 % at 0.3 micrometer particle size. With 3 m² of filter area and 315 m³/h nominal air flow rate, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and provide performance reserves for combined use with up to two VE4S MultiQube or one VX5.  Optional filter class H14 "For an even higher purity rate, a filter of class H14 is optionally available (Item No. 7.160.000.223) with a separation efficiency of > 99.995 % at 0.2 micrometer particle size."  Hepacontrol Contaminated filters not only pose a contamination risk to the surrounding air, but they also have longer drying times and a risk of overheating.the compressor turbine as a result. Here, it offers even more safety compared to passive systems thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a used filter element, the warning light automatically turns on, clearly signaling the need for a replacement of the filter element. Hepacontrol does not require an additional power connection, as the supply of the bright warning LED is provided by an integrated and particularly long-lasting high-performance battery.  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  scope of delivery complete with housing and a filter element  Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h Number of hose fittings 4 x 38 mm (Rubber adapter available in 50 mm optional) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6.100.000.043 guarantee 2 years

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.430

Learn more More Fewer