Description These infrared panels are ideal for equipping previously unheated rooms with an effective heating source or for generating localized warmth, such as at the workplace, by the sofa, or in the bathroom. The gentle heat waves are absorbed by solid materials like furniture or walls, as well as by people, providing a pleasant warmth. It is very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors.
"While traditional heating devices need to heat the entire room volume, heating plates can specifically heat desired areas. This saves a lot of energy and thus also costs."
application examples
Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation.
Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters.
Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves.
Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for spot heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.
Advantages at a Glance
• Efficient heating process with environmentally friendly IR-C radiation • Heat transfer via light waves - direct object heating without convective loss • Maximum efficiency: 100% of the electrical energy used is converted into thermal power. • Clean heat - no noise, no smell
• no condensate, no oxygen consumption, no unpleasant dust swirling • Integrated suspension device for mounting on wall or mounting supports • Also usable as a freestanding device (matching stand feet are available from us as accessories) • Immediately usable - no additional installations or expensive renovations required
You can find the ErP table for this heating device above in the "Documents" section.
VIDEO
Please note: The device is only suitable for use in well-insulated rooms or for occasional use.
Calculation of the power requirements for rooms up to 2.5 m ceiling height
Sound insulation quality of the rooms
good to very good
medium
uninsulated/old building
1 exterior wall
50 W/m²
70 W/m²
90 W/m²
the additional exterior wall
+10 W/m²
+10 W/m²
+10 W/m²
The required infrared heating power is calculated as follows: Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.
Technical data
heating capacity 580W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 Voltage 220 - 240 V/50 Hz rated current consumption max. 2.6 A Power consumption max. 0.58 kW housing Aluminum Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without stand feet) Weight 5 kg Protection class IP54 Overheating protection and
Trotec article no.
1.410.003.012
guarantee 2 years