A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Compact design, simple operation, and convincing features   This comfort dehumidifier is characterized by reliable operation, easy handling, and an affordable price. Thanks to its compact dimensions, it is handy and unobtrusive - it simply does its job in the background.   "It is equipped with a hygrostat-controlled dehumidification automatic system, allowing selection between target humidity levels of 40, 50, or 60%. Additionally, continuous operation is possible. It operates efficiently, and the operating noise for this dehumidification class is pleasant. With a capacity of up to 12 liters per day, it is capable of reliably keeping living and office spaces as well as basements up to an area of 25 m² dry."   The topic of safety is also well thought out: a light warns when the water container is full, and the overflow protection automatically shuts off the operation when the bucket is full. A viewing window also allows a look into the water tank, so the fill level can be checked at any time.     Dehumidification with comfort   Thanks to the direct hose connection, this dehumidifier can also be used in environments where regular manual emptying of the water tank is not always possible. For example, during unattended continuous drying operations in heated hobby rooms or holiday apartments.  The room air is cleaned of dust in the air intake area to prevent the interior of the device from becoming dirty. Additionally, a practical cable and plug holder, a stowable carrying handle, and steerable wheels provide easy transport when needed.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     air circulation   In this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. In a temperate environment, the device can dry about 1-2 loads of laundry per day.   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while using significantly less electricity.   "In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."       Propane (R290) as an environmentally friendly refrigerant in dehumidifiers "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection for 40, 50, or 60 % r.H.• Control panel with LED lighting• Memory function: after a power failure, the dryer resumes operation with unchanged settings -> connection to a timer possible• Continuous operation possible• Very compact and lightweight device in its performance class• Easily accessible air filter, easy to clean and reusable. Filters pet hair, lint, fluff, and dust.• Level warning light when bucket is full• Automatic shut-off when the bucket is full• Recirculation defrost automatic• Direct hose connection     Technical data   dehumidification performance at 30 °C / 80 % r.H. 12 liters / day air volume 118 m³/ h Maximum room size 25 m² (62 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C  moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.5 A Power consumption max. 350W Recommended Coverage 6 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (50g) GWP3 water bucket 2.1 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 215 x 320 x 420 mm Weight 11.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and cable holder and Display shows current room humidity, set air humidity, air quality memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Good, affordable household dehumidifier This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower outlet. The hose must be laid with a downward slope, as no pump is included in the device. The hose connection is particularly well designed in this model: if the hose is not permeable or is incorrectly laid (kinked, insufficient slope, etc.), the water is automatically redirected into the bucket, which automatically shuts off the device when full. In other models, backed-up water can lead to leakage from the bottom, which is prevented in this model.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 1-2 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off  Technical data  dehumidification performance at 30 °C / 80 % r.H. 20 liters / day air volume 150 m³/ h Maximum room size 50 m² (125 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 1.8 A Power consumption max. 420W Recommended Coverage 10 A Cable length approx. 1.5 m Plug EU plug with Swiss adapter refrigerant R290 (86g) GWP3 water bucket 3 Liter operating noise 43 dB(A) at 1 m distance 40 dB(A) at a distance of 2.5 m Dimensions L x W x H 253 x 340 x 570 mm Weight 12.5 kg defrosting automatic Electronic, Recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter guarantee 2 years       Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Dehumidifier and air purifier in one device with 95% air purity Enjoy indoor air. This design dehumidifier makes that and more possible. Equipped with two technologies for the permanent improvement of air quality, the combination devices eliminate unhealthy moisture in residential and commercial spaces, offices, retail stores, unheated conservatories, basements, and garages. Furthermore, the indoor air is purified in the integrated filter, removing 95 percent of disease-causing bacteria and viruses, mold spores, pollen, house dust, fine dust, allergens, and other pollutants. A permanent health protection for all individuals in the room – a noticeable relief, especially for allergy sufferers and those with house dust allergies.  Everything for healthier indoor air and more quality of life A hygrostat-controlled dehumidification automation with target selection of the desired humidity (30% to 80%), digital air quality sensors, four operating modes including night mode, and a two-stage fan ensure reliable dehumidification and air purification. For unattended continuous operation, the device is equipped with overflow protection and also has a rear hose connection to permanently drain the condensate extracted from the air via a hose. Conveniently, the front color LED display shows the status of the indoor air quality in three colors (Blue, Green, Red). A lit segment display in the LED display provides precise percentage information about the current humidity, the preset target humidity, and the remaining operating hours with the activated 24-hour timer for time-controlled switching on or off.  Seeing indoor air with different eyes: Air quality sensors "You cannot tell from the air whether it is too humid or contaminated with pathogens. If mold spores or viruses are floating invisibly in the air, this usually only becomes noticeable when it is already too late." The sensor sees what you cannot see. It continuously measures the room air humidity. Convenient is the front-facing color LED display of the current room air humidity: Blue: Indicates a humidity level below 50%Green: Indicates an optimal humidity level between 50 to 70 %Red: Indicates a humidity level above 70% "Cleaned and dehumidified room air makes the difference" A person breathes in and out between 10,000 and 20,000 liters of air per day. If the air is too humid and contaminated with pollutant particles or pathogens, it burdens our immune system and, in the worst case, leads to respiratory diseases. Likewise, furniture, fixtures, and even the building structure can be damaged by consistently high humidity (> 60 percent).  Combined protection against moisture and pathogens With its combined air purification and dehumidification technology, this all-rounder reliably prevents the formation of unhealthy moisture nests and associated moisture problems such as mold growth, stains, and dampness. The room air is purified in a dual filter system consisting of a pre-filter and a high-performance filter, removing virus-laden aerosols, viruses (such as SARS-CoV-2 and influenza viruses), bacteria, mold spores, fine dust, house dust, pet hair, and other airborne pathogens. It also reduces the growth of dust mites and allergens. A clean solution. The high-performance filter is consumable and should be replaced from time to time. The pre-filter is washable and can be reused repeatedly.  Auto-Restart Function The auto-restart function (or memory function) allows the device to restart with the pre-selected setting after an unexpected shutdown due to a power interruption, as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.  The complete solution for a healthy indoor climate This 2-in-1 device is characterized by extensive comfort features, high ease of use, and the pleasantly low noise level, making the air purifiers also suitable for use in noise-sensitive environments. Hygrostat-controlled dehumidification automation: In the hygrostat-controlled dehumidification automation, the device operates continuously until the desired air humidity level is reached. This can be set between 30% and 80% in 5% increments. After that, the compressor automatically switches off. If the target value is exceeded again, the device activates automatically. Thus, the dehumidifier always ensures optimal room air humidity according to your needs. Continuous operation: Condensed water on walls, glass surfaces, or cold bridges, combined with insufficient ventilation, are common causes of moisture damage, as well as when water from outside penetrates through a poorly insulated wall or during flooding and heavy rain events into the basement. To maintain a permanently dry environment, the air dryer features a powerful continuous operation. In this operating mode, the room air is continuously dehumidified at maximum performance. Night Mode: Poor air quality caused by excessive humidity, unpleasant odors, or stuffy air can literally rob you of sleep. In night mode, the device cleans and dehumidifies the air with a gentle airflow and a dimmed control panel. For a restful sleep to recharge. Clothes drying function: For gentle air drying of laundry, the drying mode is recommended. The clothes drying function (also known as the textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. The air filter ensures that pollen and fine dust are not blown through the laundry and remain attached to it. 24-Hour Timer: This allows the operation to be turned on or off after a certain number of hours. In the bedroom, a combined air dehumidification and purification is recommended for a restful sleep – during the day, however, the device does not need to operate when one is out of the house. Similarly, dehumidification and air purification in the office or workplace are only necessary during working hours. For these and other usage scenarios, the device features a programmable 24-hour timer, which allows the operating time to be preset for automatic on or off switching in 1-hour increments. Thanks to the memory function, the operation can also be controlled with a standard timer switch if the device is to operate at the same times every day (for example, during off-peak hours).  air circulationIn this model, the compressor (= dehumidification) stops immediately upon reaching the desired humidity level, while the fan continues to run for a few more minutes to dry the interior of the device. Advantages at a Glance • Combined dehumidifier with high-performance air purifier (95% effective filtration of bacteria, viruses, pollen, fine dust, dust mites, mold spores, and other allergens as well as pollutants)• Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor automatically turns off. The fan continues to run to keep the air clean. If the level is exceeded, the device activates automatically.• Suitable for rooms up to 15 m² / 37 m³• Dehumidification capacity max. 12 liters / 24 hours• Air quality display with color LED• Display of relative humidity• Continuous operation for continuous dehumidification in unattended rooms• Timer function (1-24 hours)• Night mode (whisper quiet)• Auto-restart function (memory function)• Overflow protection – Device switches off after reaching the maximum capacity of the water tank.• Warning signal for full water tank• Water container approx. 2.5 liters• Two-stage blower• Connection option for a drain hose for continuous operation• Laundry drying function  Technical data  dehumidification performance at 30 °C / 80 % r.H. 10 liters / day air volume 90 m³/ h Maximum room size 20 m² (50 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C  moisture range 30 - 80 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 1.4 A Power consumption max. 245W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter refrigerant R290 (30g) GWP3 water bucket 2.5 Liter operating noise 45 dB(A) at 1 m distance 42 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 245 x 500 mm Weight 9.5 kg defrosting automatic electronic, recirculation dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and HEPA-Filter yes, efficiency 95% Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity, air quality Night mode and memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery (10 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Trotec TTK 99 HEPA Dehumidifier and Air Purifier for Home and Living Spaces Combined dehumidifier and HEPA air purifier for basements, garages, laundry rooms, and living spaces – efficient moisture control, improved air quality, and reliable protection against mold, allergens, and fine dust. The Trotec TTK 99 HEPA is a modern dehumidifier with an integrated air purification function, specially developed for use in the home. It is ideal for keeping damp basements, garages, and laundry rooms dry, as well as for efficiently assisting with indoor laundry drying. With a dehumidification capacity of up to 31 liters per day, the device reliably ensures stable humidity and protects rooms up to approximately 90 m² from mold formation, moisture damage, and musty odors. Thanks to the integrated HEPA and pre-filter system, the room air is simultaneously cleaned. This significantly reduces pollutants such as dust, pollen, bacteria, viruses, and mold spores – for noticeably healthier indoor air. The combination of dehumidification and air purification makes the TTK 99 HEPA a versatile all-round device for modern households with increased demands for air quality and comfort. Features: Combined dehumidifier & air purifier HEPA filter (E11) against pollen & fine dust Up to 31 L/day dehumidification capacity Suitable for rooms up to approx. 90 m² Air quality indicator via LED (Blue/Green/Red) Hygrostat-controlled automatic operation Laundry drying function Timer function (24 h) Integrated child lock Memory function after power failure Direct hose connection possible 2-stage fan Automatic shut-off when tank is full Healthy Indoor Air through Intelligent Humidity and Air Purification The TTK 99 HEPA continuously monitors humidity and automatically adjusts operation to current room conditions. This ensures that humidity remains within the optimal range of 30 to 80% RH. The integrated air quality indicator provides real-time information about the condition of the indoor air. This allows you to see at a glance whether the air is too dry, optimal, or too humid. At the same time, the HEPA filter system ensures that harmful particles such as pollen, dust, bacteria, and mold spores are effectively removed from the air – ideal for allergy sufferers and health-conscious households. Efficient Dehumidification and Flexible Use With its high dehumidification capacity, the TTK 99 HEPA is ideally suited for medium-sized living and utility rooms. It reliably ensures dry conditions, especially in basements, garages, and laundry rooms. The device also efficiently supports laundry drying: Damp laundry dries significantly faster, simultaneously reducing humidity in the room. Energy-optimized operation allows for economical everyday use with high performance. Convenient Operation and Intelligent Automatic Control The integrated hygrostat allows for precise setting of the desired humidity. The TTK 99 HEPA then operates fully automatically and regulates its operation independently. Various operating modes such as automatic, continuous, laundry drying, and night mode ensure maximum flexibility in everyday life. Additional functions such as timer, child lock, and auto-restart increase operating comfort and safety in daily use. Combined Dehumidification and Air Purification The Trotec TTK 99 HEPA operates on the condensation principle. Humid room air is drawn in, cooled, and dehumidified. The condensed water is safely drained into the tank or via a hose. In parallel, the air is passed through a two-stage filter system. The pre-filter captures coarse particles, while the HEPA filter (E11) removes the finest pollutants from the air. This combination ensures a permanently dry and hygienically clean indoor climate. Typical Applications Basements and lower floors Garages and hobby rooms Laundry rooms Living rooms and bedrooms Private archives Rooms for laundry drying Small storage rooms Why combined dehumidification and air purification is beneficial Humidity and pollutants often occur simultaneously in many indoor spaces. While high humidity promotes mold growth, dust, pollen, and germs impair air quality. The TTK 99 HEPA solves both problems in one device: It reduces humidity and simultaneously filters the air – for a noticeably healthier indoor climate. Advantages at a Glance Combined dehumidifier and HEPA air purifier Up to 31 L/24 h dehumidification capacity Suitable for rooms up to approx. 90 m² HEPA filter against allergens and fine dust Air quality indicator via LED Laundry drying function Hygrostat-controlled automatic operation Timer and night mode Integrated child lock Direct hose connection possible Very versatile for household use Technical Data Dehumidification capacity 31 L / 24 h (30 °C / 80 % RH) Air volume 170 m³/h Room size up to 90 m² Temperature range 5 – 32 °C Humidity range 35 – 100 % RH Power consumption max. 720 W Mains connection 220–240 V / 50 Hz Connection cable 1.8 m with EU plug and fixed adapter for Switzerland Sound pressure level 51 / 48 dB(A) Water tank 4 liters Refrigerant R290 Dimensions 250 × 370 × 585 mm Weight 17 kg Warranty 2 years Documents / Downloads Operating Instructions GermanUser Manual EnglishOperating Instructions Italian

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer

Comfort, design, and high air performance   This dehumidifier impresses with its elegant design and thoughtful functionality. Its diverse features include a total of four operating modes. Here, the dehumidifier offers a hygrostat-controlled dehumidification automatic with a target value selection between 35 and 85% relative humidity in comfortable 5% increments, including an optional turbo fan.   A popular alternative to the dehumidification automatic function is the comfort function, where the humidity level is automatically adjusted to a comfortable value depending on the temperature. Additional operating modes include a laundry drying function and a permanent function.     Comfort function: Temperature-dependent air dehumidification   To achieve an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended when using programmable heating systems. If the room temperature changes during the day or at night, the dehumidifier automatically adjusts its dehumidification performance. This protects against mold formation and saves electricity.      Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Practical Functions   When drying residential and office spaces of up to around 40 m², this dryer is an absolutely reliable partner. Various details simplify operation, such as the viewing window on the tank, which makes the fill level easily recognizable, the practical timer function, the fill level warning light when the water container is full, and the overflow protection with automatic shut-off. The air filter is easy to remove and wash. When the tank is full, a float automatically interrupts operation.     Auto-Restart Function   The auto-restart function (or memory function) allows the device to restart with unchanged settings after a power interruption as soon as the power supply is restored. This makes the dehumidifier suitable for use with a timer.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be used to significantly accelerate the drying of laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns.     Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   "Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs."     Advantages at a Glance   • Hygrostat-controlled dehumidification automation with target value selection between 35 and 85 % r.H. in 5 % steps• As soon as the desired humidity level is reached, the compressor (i.e., the dehumidification) automatically pauses. The fan continues to run to determine the actual humidity in the room. If it exceeds the limit, the device automatically switches back on.• Comfort operation for temperature-dependent automatic control of humidity for optimal room climate at all times• Continuous operation• Auto-restart function for use with an external timer• Display of relative humidity• Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Laundry drying function• Timer Function• Recirculation defrost automatic• Connection for external condensate drainage• 3 fan speeds• Level warning light when water tank is full• Automatic shutdown when tank is full thanks to float   Technical data  dehumidification performance at 30 °C / 80 % r.H. 16 liters / day air volume 150 m³/ h Maximum room size 40 m² (100 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C moisture range 35 - 85 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.2 A Power consumption max. 430W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (75g) GWP3 water bucket 3 Liter operating noise 46 dB(A) at 1 m distance 43 dB(A) at a distance of 2.5 m Dimensions L x W x H 245 x 350 x 510 mm Weight 15 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 3-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Reliable dehumidifier with solid drying performance This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards.  Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower-lying drain. The hose must be laid with a downward slope, as no pump is included in the device.  Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 2-3 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concern.  Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.  Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.  Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function•  Automatic fault diagnosis system•  Laundry drying function•  Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function•  Direct hose connection• 2 fan speeds•  Level warning light when water tank is full•  Overflow protection with automatic shut-off•  Hot gas defrosting: faster automatic self-defrosting in cooler environments.   Technical data  dehumidification performance at 30 °C / 80 % r.H. 25 liters / day air volume 215 m³/ h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.4 A Power consumption max. 570W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A reliable wall-mounted dehumidifier with an appealing design. A durable, corrosion-protected construction made of powder-coated, galvanized steel sheet ensures maximum reliability for this industrial condensate dryer and makes it particularly resistant to environmental influences thanks to its protective-coated heat exchanger. The combination of high efficiency and low-maintenance design makes the dryer ideally suited for fully automatic, hygrostat-controlled continuous drying applications in numerous fields of use, and thanks to its autonomous recirculation operation, it can also be easily integrated into any application environment afterwards. With its KTL-coated heat exchanger, it is also extremely resistant to environmental influences even in particularly reactive air environments with high salt, chlorine, or solvent content.    Hygrostat controlled and protection against manipulation The built-in hygrostat automatically regulates the humidity to an optimal level, where condensation, mold, or corrosion have no chance. The target humidity can be freely adjusted according to your needs. High efficiency is ensured by the quiet-running AC axial fan and the powerful compression refrigeration system.  The dry air supplied to the room is simultaneously heated for process technology, so that the use of conventional heating and ventilation energy can be reduced.     Thanks to high-quality hot gas automation, the dryer requires only very short defrosting phases. This is optimal, especially for dehumidifying unheated rooms, as it improves the performance and increases efficiency.  The controls are protected against unauthorized access, making this industrial dryer also the ideal dehumidifier for public buildings, staff and changing rooms, or museums.    Wide range of applications In wall operation, the device can be used for a variety of applications, for example:  • Humidity control in staff rooms, changing rooms, lounges, and break rooms• Drying of changing rooms, gyms, bike and ski cellars• Constant humidity conditions in garages, workshops, test benches, or production halls• Dehumidification in archives, collections, or libraries• Dehumidification of water engineering facilities and pumping stations to prevent condensate formation on pipes or pumps• Humidity control during the storage of natural products, for example for quality assurance in wood storage or during the storage of raw tobacco.• Corrosion prevention in electrical switchgear, boiler systems, turbines, and piping systems in power plants or during the storage of raw bodies and metal components.• Humidity control in data centers, control rooms, etc.• Moisture control in the food industry, for example in cheese production or confectionery manufacturing Due to the horizontally directed recirculation airflow and its compact design, the plug-and-play dehumidifier is particularly well suited for installation above door areas.  The condensate drawn from the air is directly drained through a downward laid hose. If the water needs to be drained to higher areas, please also consider our pump kits.  Advantages at a Glance • Professional quality, made in Germany• High dehumidification performance even at low temperatures• Corrosion-protected construction• Fully automatic operation• Professional hot gas defrosting automatic system• Quiet AC axial fan for horizontal recirculation airflow• Optimal suited for installation above door areas• Control elements installed protected from unauthorized access• Available optionally with condensate pump  Technical data  dehumidification performance at 20 °C / 60 % r.H. at 30 °C / 80 % r.H.   11 liters / day 22 liters / day air volume max. 225 m³/ h Maximum room size 60 m² (150 m³) temperature range 5 - 40°C Moisture range technical  Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 657W Recommended Coverage 10 A Plug approx. 3.5m connection cable with EU plug and Swiss fixed adapter refrigerant R-407C (480g) GWP1774 hose connection   Direct hose connection, no bucket suitable hose 10mm inner diameter short hose piece included in the delivery operating noise   53 dB(A) at 1 m distance 49 dB(A) at a distance of 3 m Masse (B x H x T) 840 x 330 x 365 mm Weight 37 kg defrosting automatic Heissgas dehumidification automation mechanical hygrostat wheel, stepless Ventilator axial, single-stage blower prefilter and operating hour meter no Continuous operation possible and Display no memory function yes (set values remain mechanically fixed) Trotec article no. 1.125.000.111 guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

The 650S is a robust and powerful construction dryer that stands out for its versatility. It effortlessly handles demanding tasks such as drying after water damage, new construction drying, and maintaining dryness in heated and unheated storage rooms. Manufactured in a specialized European facility, this dehumidifier impresses with its high-quality workmanship and reliable operation. The durable construction of the 650S guarantees a long lifespan, while the easy maintenance and low upkeep costs make operation even more economical. Despite its impressive performance and quality, the 650S is available at an extremely attractive price, making it an excellent choice for professional users.Easy to use The desired target humidity can be continuously regulated between 32 - 100 % using a mechanical hygrostat, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 925 cubic meters per hour. With its stable cart construction and large wheels, frequent changes of location can be easily carried out.     Direct hose connection and optional pump kit   Due to its very high dehumidification performance, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a slope towards the drain. If this is not possible, a suitable pump kit is optionally available, which can pump the water upwards and also outwards.   The operating switch is protected against dust and splashes by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position.     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in the range above 40% humidity. Technically, the dryer can be used at room temperatures down to about 5°C, even in unattended continuous operation.     Optional counters   Included in delivery is no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 91 liters / day Air volume 925 m³/ h Maximum room size 230 m² (550 m³) Minimum room size 4 m² Temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. voltage 220 - 240 V/50 Hz Nominal current consumption max. 9.5 A Power consumption max. 2100 W Recommended Coverage 16 A Cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter Operating noise 56 dB(A) at 1 m distance53 dB(A) at a distance of 2.5 m Dimensions L x W x H 616 x 511 x 1022 mm (incl. guide bracket) Weight 52 kg Automatic defrosting Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower Prefilter and Timer no (operation on timer possible) Continuous operation possible and Memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 16 mm Pump optional available (not included in the delivery) Guarantee 2 years

Learn more More Fewer

Trotec TTK 355 S – Powerful construction dryer for the toughest applications Whether for quickly reducing high humidity or for reliably drying large-volume rooms – the TTK 355 S is designed precisely for such challenges. The device owes its impressive performance to the effective combination of a powerful rotary compressor with a high-quality fan that processes air volumes of up to 490 m³/h. This high air circulation allows the optimised heat exchanger system to continuously extract large amounts of moisture from the room air – up to 70 litres per day with just one device. A particular advantage is the integrated hot gas defrosting automatic system: it prevents dehumidification pauses due to fixed defrosting intervals, as is common with many other devices, and thus ensures consistent and efficient performance – even in cooler operating conditions. Mobility meets robustness The TTK 355 S is also perfectly equipped for changing locations and harsh environments. The robust chassis with a practical push handle bar and large rubber wheels makes transport – even over stairs or uneven ground – incredibly easy. The installed rubber wheels are abrasion-resistant and leave no marks on sensitive floor coverings. Thanks to the rotary compressor technology, the TTK 355 S can also be transported in almost any position. A special protection system for the electronics reliably protects the sensitive components from moisture and dirt – for a long service life even under construction site conditions. Thoughtful design – inside and out The TTK 355 S also impresses visually: the technology is housed in a functionally designed, resistant casing in the distinctive Trotec industrial design – aesthetically pleasing, protected and practical. The stackable design with practical groove guides on the top allows for space-saving storage and safe transport of several identical devices. Your advantages at a glance: 100 % Trotec – development, design and manufacturing High dehumidification performance, even at lower temperatures Protection of electronics against dust and moisture Maintenance-friendly design Easy handling and flexible transport Rotary compressor: transportable in any position Stackable for storage and transport Multi-stackable with identical models Integrated heat protection for the compressor German industrial design with design patent protection Safe operation with high heat and moisture loads When restoring water damage or similar applications, extreme conditions often prevail: high humidity combined with high temperatures. This places a great strain on refrigeration dryers. The so-called "35 rule" illustrates the problem: If the room temperature is continuously above 35 °C, the lifespan of conventional refrigeration dryers drops dramatically – to less than 35 %. The cause is the increasing pressure in the refrigerant circuit, which heavily burdens the compressor. Although the devices continue to operate initially, they are operating far beyond their load limit, which can lead to premature failure. Adsorption dryers are not an economical alternative under such conditions – their energy consumption is significantly higher for comparable dehumidification performance. Intelligent protection function as standard Therefore, the TTK-S models are equipped with an intelligent compressor heat protection. Sensors continuously monitor the temperature development in the device. In case of overheating, the compressor switches off automatically, while the fan continues to run. As soon as the system is back in the safe temperature range, the compressor automatically resumes operation. This protection mechanism not only extends the service life of the device but also protects the materials to be dried and the building structure from heat-related damage. Dehumidification capacity at 20 °C / 60 % RH 27 litres / day at 30 °C / 80 % RH 55 litres / day Technical data Air flow rate max. 490 m³/h Room size 140 m² / 350 m³ Temperature range min. 5 - 32 °C Humidity range min. 40 - 90 % RH Mains connection 220 - 240 V, 50 Hz Rated current consumption 6.1 A Power consumption 1.4 kW Recommended fuse 10 A Connection plug EU plug with Swiss fixed adapter Cable length 3 m Rotary compressor Refrigerant type R-454C Refrigerant quantity 650 g GWP factor 146 CO2 equivalent 0.0949 t Pressure suction side 0.6 Mpa Pressure discharge side 2.2 Mpa Max. permissible pressure 3 Mpa Dimensions (H x W x D) 725 x 380 x 390 mm Weight 39 kg Water bucket 6 litres + direct hose connection Sound level at 1 m distance 54 dB(A) Trotec item no. 1.120.000.163 Warranty 2 years

Learn more More Fewer

The robust and powerful all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely requires servicing, and is very affordable considering its power and quality."  Easy handling The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat, and continuous operation is also possible. With the used lamella evaporator, target humidities below 40% r.H. are difficult to achieve; however, this technology shows impressive dehumidification power in temperate and humid environments. Particularly useful in larger areas is the high air circulation volume of a substantial 1000 cubic meters per hour. With its stable trolley construction and large wheels, frequent relocation to different sites can be easily carried out.  Bucket, direct hose connection and optional pump kit The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards. "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     For continuous operation on construction sites   The possibility of connecting an external condensate drain – optionally with a condensate pump if needed – makes the construction dryer also ideally suited for longer unattended drying tasks, e.g. in construction drying.     Optional counters The delivery does not include an hour or consumption meter. You can order these from us if desired (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional)• Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % r.H. 55 liters / day air volume 1000 m³/ h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 6.1 A Power consumption max. 1400W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 Liter operating noise 54 dB(A) at 1 m distance 51 dB(A) at a distance of 2.5 m Dimensions L x W x H 530 x 500 x 965 mm (incl. guide bracket) Weight 39 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

DH 120 Wall-Mounted Dehumidifier for Commercial, Basement and Swimming Pool Areas Powerful, compact wall-mounted dehumidifier for reliable humidity control in commercial spaces, archives, basements, and medium-sized swimming pool areas – maximum dehumidification performance, high energy efficiency, and reliable building protection. The DH 120 wall-mounted dehumidifier is a powerful device for professional humidity control in demanding indoor environments. It was specially developed for use in medium-sized commercial premises, damp basement areas, archives, and small to medium-sized swimming pool areas. With an impressive dehumidification capacity of up to 150 liters per day (at 30 °C and 80% RH), the DH 120 reliably ensures stable humidity and effectively prevents the formation of mold, condensation, and moisture-related building damage. Continuous dehumidification not only protects buildings and materials but also preserves sensitive stored goods, document archives, and technical installations for the long term. The robust wall-mounted unit combines high performance with a compact, functional design, making it ideal for continuous use in commercial and technical environments. Your advantages: High dehumidification capacity up to 150 L/day Suitable for commercial, basement, and swimming pool areas Robust aluminum housing Corrosion-protected heat exchangers Integrated electronic hygrostat Automatic humidity control 2-stage ventilation Direct condensate drainage without a tank Energy-efficient continuous operation Wall mounting for space-saving installation User-friendly operation Long service life in professional use Reliable humidity control for optimal indoor climate The DH 120 ensures constant and precise regulation of humidity in demanding environments. Continuous dehumidification effectively prevents the formation of mold, corrosion, and condensation. This is particularly important in basements, archives, and commercial spaces where sensitive materials, documents, or technical systems are stored. In swimming pool areas, the DH 120 also contributes significantly to a stable and pleasant indoor climate. Controlled humidity not only protects the building structure but also significantly increases the lifespan of inventory and technical equipment. Efficient operation and economical dehumidification The DH 120 was developed for energy-efficient continuous operation. The powerful compressor and fan technology ensure high dehumidification performance with optimized energy consumption. Thanks to modern control technology, the device only operates at full power when it is actually required. This reduces operating costs and ensures efficient energy use. The combination of high performance and economical operation makes the DH 120 ideal for professional applications with persistent humidity problems. Robust construction with high corrosion protection The aluminum housing and cataphoric coated heat exchangers ensure high resistance to moisture and corrosion. This makes the DH 120 suitable even for demanding applications such as swimming pool areas or damp basements. The high-quality workmanship ensures a long service life and reliable operation even under difficult environmental conditions. Space-saving wall mounting The DH 120 is designed as a wall-mounted unit, allowing for particularly space-saving installation. This is especially advantageous in technical rooms, basements, or cramped commercial areas. Installation is simple and efficient, while the device can be discreetly integrated into the environment thanks to its functional design. Automatic humidity control The integrated electronic hygrostat continuously monitors the room air and fully automatically regulates operation. As soon as the set humidity is exceeded, the DH 120 activates itself. This ensures consistent air quality without the need for manual control. This increases comfort and provides reliable protection of the building structure. Efficient condensation principle The DH 120 operates on the proven condensation principle. Humid room air is drawn in and passed over the evaporator, where it is cooled below the dew point. The moisture condenses and is safely discharged. Subsequently, the dried air is passed over the condenser, reheated, and returned to the room. This creates an efficient cycle for continuous dehumidification. 2-stage ventilation for flexible adaptation The two-stage ventilation allows for adaptation of air circulation to the respective room conditions. Depending on the humidity level and room size, two power levels can be selected. This ensures maximum flexibility and optimal adaptation to different operating conditions. Typical areas of application Medium-sized commercial spaces Damp basement areas Archive and storage rooms Medium-sized swimming pool areas Technical and ancillary rooms Material storage with humidity requirements Renovation and drying projects Why a professional dehumidifier is important Uncontrolled humidity leads to significant damage in many buildings. Mold growth, material destruction, and corrosion are common consequences of high humidity. The DH 120 reliably prevents these problems, protects the building structure, and at the same time ensures a stable and healthy indoor climate. This makes it an economical and durable solution for professional applications. Advantages at a glance Very high dehumidification capacity up to 150 L/day Suitable for commercial, basement, and swimming pool areas Robust aluminum industrial design Corrosion-protected heat exchangers Automatic humidity control 2-stage ventilation Direct condensate drainage without a tank Energy-efficient continuous operation Space-saving wall mounting Ideal for professional applications Technical data Operating temperature range 5 – 40 °C Operating humidity range 40 – 80 % RH Air flow rate 800 / 1200 m³/h Sound pressure level 51 / 56 dB(A) Dehumidification 150 L / 24 h (30 °C / 80 % RH) Dehumidification (reference) 66 L / 24 h (20 °C / 60 % RH) Power consumption 2.6 kW Mains connection 230 V / 1 ph / 50 Hz Dimensions 1410 × 365 × 860 mm Weight 130 kg Warranty 2 years

Learn more More Fewer