TFT Series - the Adsorption Dryer"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • soldier Stand• 4 carrying handles on the side  Due to high demand, the delivery time is currently 6-8 weeks from the order.   2 year guarantee   You can see the shipping costs in the shopping cart.   Technical data Dehumidification capacity: 453.6 kg per day                                       = 18.90 kg per hour Air volume / Pressure Process air volume blowing free: 2000 m³/hPressure: 300 Pa Nominal regeneration air: 820 m³/hPressure: 250 Pa   Workspace Temperature: -30 °C to + 35°C  Humidity: 10 - 95% r.H. Temperature rise in the heating coil: +80°CNoise level at a distance of 10m: 66 dB(A)Power connection: 1 x 400 V/3 / 50 Hz Power consumption: 27 kW (max. 42.5 A)Connection cable / Plug  Mass housing (L x W x H) mm: 1285 x 845 x 1255 mmDiameter hose connections: regeneration air OUT D = 250mm                                                                         Regeneration air ONE D = 220x350mm                                                                         Process air OUT D = 420x615mm                                                                         Process air A D = 420x615mmWeight: 220 kg

Learn more More Fewer

This maintenance-friendly adsorption dehumidifier guarantees high dehumidification rates of several hundred kilograms per day. With its standard stainless steel housing and an electrical control box in IP53 design, it is also corrosion-resistant against adverse operating environments.   "It is ideally suited for many drying tasks or dry air production. Typical applications include a wide range of air and gas dehumidification tasks in industry, logistics, or supply companies, for example, for production and product security or for the preservation of machines, inventory, and buildings through constant protection against corrosion, condensate, or mold formation."      High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • Wide voltage• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• Filter monitoring (per air flow and collective warning light)• Configurable air direction reversal (conversion with minimal effort)• Terminals for external ON/OFF• Potential-free contacts (operation, fault, filter)• Operating hour meter• Air volume regulation• integrated heat recovery • Robust and maintenance-friendly stainless steel housing• Duoventic control* for regeneration air and process air fan respectively• Overtemperature safety system with restart lock (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat    Possible additional options   • Tax module Millennium• Flowmatic-Flow Rate Control• Humidity/Temperature Control• Dew Point Sensor -80 °C to +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust stainless steel housing• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort)• Duoventic control – the performance of each fan can be individually adjusted using a potentiometer.• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost every application.*According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.   A notice: This device is available under the brands "Trotec" and "Dantherm".     Technical data   dry air Dehumidification at 20°C/60% r.H. 15.7 kg/Std. = 376.8 kg/Day Air volume blowing free 3150 m³/h nominal air volume 2800 m³/h external pressing 300 Pa connection inlet Ø 315 mm connection outlet Ø 315 mm     regeneration air nominal air volume 570 m³/h external pressing 300 Pa connection inlet Ø 200 mm connection outlet Ø 200 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 31.7 A Installed capacity 21.6 kW heating capacity 18.9 kW recommended coverage 32A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1323 x 769 x 1348 mm Weight 250 kg Country of production Germany Trotec article no. 1.110.000.175 guarantee 2 years

Learn more More Fewer

This maintenance-friendly adsorption dehumidifier guarantees high dehumidification rates of several hundred kilograms per day. With its standard stainless steel housing and an electrical control box in IP53 design, it is also corrosion-resistant against adverse operating environments.   "It is ideally suited for many drying tasks or dry air production. Typical applications include a wide range of air and gas dehumidification tasks in industry, logistics, or supply companies, for example, for production and product security or for the preservation of machines, inventory, and buildings through constant protection against corrosion, condensate, or mold formation."      High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • Wide voltage• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• Filter monitoring (per air flow and collective warning light)• Configurable air direction reversal (conversion with minimal effort)• Terminals for external ON/OFF• Potential-free contacts (operation, fault, filter)• Operating hour meter• Air volume regulation• integrated heat recovery • Robust and maintenance-friendly stainless steel housing• Duoventic control* for regeneration air and process air fan respectively• Overtemperature safety system with restart lock (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat    Possible additional options   • Tax module Millennium• Flowmatic-Flow Rate Control• Humidity/Temperature Control• Dew Point Sensor -80 °C to +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust stainless steel housing• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort)• Duoventic control – the performance of each fan can be individually adjusted using a potentiometer.• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost every application.*According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.   A notice: This device is available under the brands "Trotec" and "Dantherm".     Technical data   dry air Dehumidification at 20°C/60% r.H. 20.5 kg/Std. = 492 kg/Day Air volume blowing free 4300 m³/h nominal air volume 3700 m³/h external pressing 400 Pa connection inlet Ø 315 mm connection outlet Ø 315 mm     regeneration air nominal air volume 740 m³/h external pressing 200 Pa connection inlet Ø 200 mm connection outlet Ø 200 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 42.8 A Installed capacity 28.8 kW heating capacity 24.5 kW recommended coverage 63A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1323 x 769 x 1348 mm Weight 270 kg Country of production Germany Trotec article no. 1.110.000.177 guarantee 2 years

Learn more More Fewer

This maintenance-friendly adsorption dehumidifier with a large dry air volume is capable of extracting several hundred kilograms of water per day.   The robust, corrosion-protected steel housing in galvanized and painted design withstands even the most adverse operating environments and is ideally suited for drying, gas dehumidification, or dry air generation in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering, but also for reducing ice and frost formation in deep-freeze zones or for protecting moisture-sensitive stored goods.    "It is suitable, for example, for:" • Avoidance of corrosion damage due to condensate • Guaranteeing the best possible processing quality of moisture-sensitive stock goods • Ice-free maintenance of cooling zones • accelerated drying of your products     Perfectly in Flow   The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion.     Flowmatic S reliably maintains the flow rate at the set point.    The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times.     High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Configurable Air Direction Reversal   A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes.    The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted   Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options.     Possible additional options   • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.  A notice: This device is available under the brands "Trotec" and "Dantherm".  Technical data  dry air Dehumidification at 20°C/60% r.H. 29.1 kg/Std. = 698.4 kg/Day Air volume blowing free 5800 m³/h nominal air volume 5200 m³/h external pressing 400 Pa connection inlet Ø 500 mm connection outlet Ø 500 mm     regeneration air nominal air volume 1050 m³/h external pressing 300 Pa connection inlet Ø 300 mm connection outlet Ø 300 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 60 A Installed capacity 40 kW heating capacity 36 kW recommended coverage 63A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1680 x 1110 x 1919 mm Weight 680 kg Country of production Germany Trotec article no. 1.110.000.182 guarantee 2 years

Learn more More Fewer

This maintenance-friendly adsorption dehumidifier with a large dry air volume is capable of extracting several hundred kilograms of water per day.   The robust, corrosion-protected steel housing in galvanized and painted design withstands even the most adverse operating environments and is ideally suited for drying, gas dehumidification, or dry air generation in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering, but also for reducing ice and frost formation in deep-freeze zones or for protecting moisture-sensitive stored goods.    "It is suitable, for example, for:" • Avoidance of corrosion damage due to condensate • Guaranteeing the best possible processing quality of moisture-sensitive stock goods • Ice-free maintenance of cooling zones • accelerated drying of your products     Perfectly in Flow   The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion.     Flowmatic S reliably maintains the flow rate at the set point.    The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times.     High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Configurable Air Direction Reversal   A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes.    The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted   Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options.     Possible additional options   • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.   A notice: This device is available under the brands "Trotec" and "Dantherm".     Technical data  dry air Dehumidification at 20°C/60% r.H. 37.2 kg/hour = 892.8 kg/day Air volume blowing free 7200 m³/h nominal air volume 6600 m³/h external pressing 400 Pa connection inlet Ø 500 mm connection outlet Ø 500 mm     regeneration air nominal air volume 1330 m³/h external pressing 300 Pa connection inlet Ø 300 mm connection outlet Ø 300 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 73.5 A Installed capacity 50.5 kW heating capacity 45 kW recommended coverage 100A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1680 x 1110 x 1919 mm Weight 720 kg Country of production Germany Trotec article no. 1.110.000.187 guarantee 2 years

Learn more More Fewer

This maintenance-friendly adsorption dehumidifier with a large dry air volume is capable of extracting more than a thousand kilograms of water per day.   The robust, corrosion-protected steel housing in galvanized and painted design withstands even the most adverse operating environments and is ideally suited for drying, gas dehumidification, or dry air generation in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering, but also for reducing ice and frost formation in deep-freeze zones or for protecting moisture-sensitive stored goods.    "It is suitable, for example, for:" • Avoidance of corrosion damage due to condensate • Guaranteeing the best possible processing quality of moisture-sensitive stock goods • Ice-free maintenance of cooling zones • accelerated drying of your products     Perfectly in Flow   The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion.     Flowmatic S reliably maintains the flow rate at the set point.    The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times.     High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Configurable Air Direction Reversal   A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes.    The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted   Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options.     Possible additional options   • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.   A notice: This device is available under the brands "Trotec" and "Dantherm".     Technical data  dry air Dehumidification at 20°C/60% r.H. 46.2 kg/Std. = 1108.8 kg/Day Air volume blowing free 9000 m³/h nominal air volume 8200 m³/h external pressing 400 Pa connection inlet Ø 500 mm connection outlet Ø 500 mm     regeneration air nominal air volume 1660 m³/h external pressing 300 Pa connection inlet Ø 300 mm connection outlet Ø 300 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 93.5 A Installed capacity 64.5 kW heating capacity 57 kW recommended coverage 125A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1680 x 1110 x 1919 mm Weight 750 kg Country of production Germany Trotec article no. 1.110.000.190 guarantee 2 years

Learn more More Fewer

Extensively equipped adsorption dryer with an immense dehumidification capacity of 55 kg per hour. Optimal for very high dry air demand even in cool environments with low dew points.   "It is suitable, for example, for:" • for the permanent drying of buildings • for gas dehumidification or dry air production in the chemical, pharmaceutical, and food industries as well as in mechanical engineering • to protect machines, inventory, and buildings from corrosion, condensation, or mold formation, for example in water engineering facilities or electrical control centers.      Perfectly in Flow   The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion.     Flowmatic S reliably maintains the flow rate at the set point.    The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times.     High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Configurable Air Direction Reversal   A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes.    The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted   Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options.     Possible additional options   • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.   A notice: This device is available under the brands "Trotec" and "Dantherm".     Technical data  dry air Dehumidification at 20°C/60% r.H. 55.1 kg/Std. = 1322.4 kg/Day Air volume blowing free 10'500 m³/h nominal air volume 9680 m³/h external pressing 300 Pa connection inlet Ø 700 mm connection outlet Ø 700 mm     regeneration air nominal air volume 1970 m³/h external pressing 300 Pa connection inlet Ø 400 mm connection outlet Ø 400 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 108 A Installed capacity 74 kW heating capacity 66 kW recommended coverage 160A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1802 x 1460 x 2032 mm Weight 900 kg Country of production Germany Trotec article no. 1.110.000.192 guarantee 2 years

Learn more More Fewer

Extensively equipped adsorption dryer with an immense dehumidification capacity of 66.5 kg per hour. Optimal for very high dry air demand even in cool environments with low dew points.   "It is suitable, for example, for:" • for the permanent drying of buildings • for gas dehumidification or dry air production in the chemical, pharmaceutical, and food industries as well as in mechanical engineering • to protect machines, inventory, and buildings from corrosion, condensation, or mold formation, for example in water engineering facilities or electrical control centers.      Perfectly in Flow   The high-performance fans are driven by energy-saving EC motors, whose speed can be adjusted independently using the "Duoventic" controller. Thanks to this integrated air volume regulation, you can quickly and appropriately configure the drying unit for any requirement without any conversion measures: extremely dry air with low airflow, larger quantities of dry air, or maximum recirculation performance with a moderate dry air proportion.     Flowmatic S reliably maintains the flow rate at the set point.    The dehumidifier is equipped as standard with a "Flowmatic-S" volumetric flow control system, which automatically detects and compensates for pressure losses based on sensors. The control of the volumetric flow or pressure can be adjusted via a control signal as desired. As soon as it registers deviations, it counteracts them and thus guarantees a consistent maintenance of the specified volumetric flow or pressure. This provides you with a constant flow of dry air in the desired quantity at all times.     High dry air performance even at low dew point   The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.     TTR-Trisorp-Dual-Principle    Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.    When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.     Series-integrated heat recovery (HR)   A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.     Configurable Air Direction Reversal   A practical detail for stationary industrial use, especially in piped installations, is the configurable air reversal of the TTR units, as in such applications new or additional devices must be able to flexibly integrate into existing processes.    The dehumidifier housing is already factory-prepared for the mirror-inverted assembly of the air guidance, so this device can always be set up with the operating side facing the user, regardless of the process air direction. If desired, the air direction can be optionally adjusted to your individual processes by reversing the module. Blow dry air out on the right and discharge humid air on the left, or vice versa.     Wide range of applications   Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:   • Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.• Process air dehumidification for gas turbines and humidity control in gas distribution stations• Ice-free maintenance of freezing tunnels and deep-freeze storage• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing• Process air drying and plant dehumidification in the steel industry• Air drying and dew point control in cold storage rooms• Drying of water engineering facilities and pumping stations• Climate conditioning of ammunition depots or military technical equipment storage facilities• Dehumidification and dew point control in clean and dry rooms• Climate conditioning in dry air storage or in timber storage halls     Value added without extra cost   The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:   • SPS control module Millenium for precise energy management• Flowmatic-Flow Rate Control• Rotor speed control (rotor and drive)• Overtemperature safety system with restart lock (regeneration air)• Operating temperature management (regeneration air)• G4 air filter in Z-line design with electronic monitoring and collective warning light• External connection terminals On/Off and connection terminals Hygrostat• Potential-free contacts for operation, fault, and filter• Configurable air direction reversal• Robust and maintenance-friendly steel housing, galvanized and painted   Furthermore, the device can be precisely equipped for your individual needs with numerous equipment options.     Possible additional options   • Stainless steel case• Moisture/Temperature Control• Dew point sensor -80 °C ... +20 °C• Touch screen for device operation• Remote connection GSM• Remote connection WLAN• Heat exchanger module• Steam heater for regeneration air• Gas heater for regeneration air• Electric reheater for dry air• External Hygrostat HG 120• External Hygrostat HG 125• Transport frame (stackable), with wheels   Advantages at a Glance   • High dehumidification performance even at low dew points• Robust steel housing, galvanized and painted• Reliable silica gel adsorption rotor• Configurable air direction reversal (conversion with minimal effort) • Duoventic control* – the power of each fan can be individually adjusted using a potentiometer.• SPS control unit Millenium• Flowmatic control for constant setpoint maintenance of specified volumetric flow rate or pressure• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation• Electric regeneration heating• Filter monitoring (per air flow and collective warning light)• Individually configurable through a variety of equipment options for almost any application. *According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.   A notice: This device is available under the brands "Trotec" and "Dantherm".     Technical data  dry air Dehumidification at 20°C/60% r.H. 66.5 kg/Std. = 1596 kg/Day Air volume blowing free 12'500 m³/h nominal air volume 11'800 m³/h external pressing 300 Pa connection inlet Ø 700 mm connection outlet Ø 700 mm     regeneration air nominal air volume 2380 m³/h external pressing 300 Pa connection inlet Ø 400 mm connection outlet Ø 400 mm     working principle TTR-Trisorp-Dual Ambient temperature -20 to +40 °C Ambient humidity (non-condensing) 0 - 100 % r.F. power connection 380 - 480 V/50 - 60 Hz rated current consumption 129 A Installed capacity 89 kW heating capacity 81 kW recommended coverage 160A electrical connection terminal connection Suitable for continuous operation and Dimensions H x W x L 1802 x 1460 x 2032 mm Weight 1000 kg Country of production Germany Trotec article no. 1.110.000.195 guarantee 2 years

Learn more More Fewer