A very powerful construction dehumidifier with brutal dehumidification strength. Perfect for drying large construction sites and for the effective drying of water damage. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally affordable in price for this performance class. On the other hand, it has everything needed for quick drying: strong dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child’s play. Set up - connect the hose - plug in - flip the main switch - done!"   The operation continues until the dryer is reinstalled. As long as the device is connected to the power grid, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in temperate environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Direct hose connection   With dryers of this strength, collecting water in an integrated bucket makes little sense, as it would constantly fill up. The water extracted from the air is therefore drained through a directly connected hose. The hose must be laid with a downward slope, as there is no pump integrated into the dryer. Freestanding condensate pumps are optionally available if the water needs to be transported upwards or over a distance.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).    Supplement plus for the environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.   Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guiding handle• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 100 liters / day air volume 1000 m³/ h Maximum room size 250 m² (750 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 30 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 8.1 A Power consumption max. 1920W Recommended Coverage 16 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R454C (1000g) GWP146 water bucket no bucket operating noise 67 dB(A) at 1 m distance 64 dB(A) at a distance of 2.5 m Dimensions L x W x H 538 x 698 x 1006 mm incl. guide rail and rollers Weight 64 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator radial, single-stage blower prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12mm) guarantee 2 years

Learn more More Fewer

This practical mini laser has everything a distance measurer needs. This includes precise laser measurement of distances, areas, and volumes. Surprisingly versatile equipment with helpful functions as well as simple and intuitive operation. It is very small and lightweight and fits in any pocket.     Excellent price-performance ratio   'Despite a very favorable price, the measuring device impresses with quality and functionality. Distances of up to 30 meters, areas, and volumes are determined quickly, but also accurately. The deviation is at most 3 millimeters.'   Furthermore, the device scores with the 'simple' and 'double' Pythagoras: both are essential functions that allow for indirect distance or height calculations, in addition to checking for a right angle. Additionally, the handheld laser meter has other useful features such as a continuous measurement mode, the addition and subtraction of measurement results, and the automatic storage of the last 10 measurements.     Thoughtful equipment   "Both the simple operation and the practice-optimized features of the handheld laser meter make the small measuring device truly great." • Automatic shutdown for the laser after 30 seconds • Automatic shutdown for the entire measuring instrument after 3 minutes • Coating with a robust, dust- and splash-proof housing • Protection class IP54   The integrated lithium-ion battery is easily and quickly charged with the included micro-USB cable.     Advantages at a Glance   • 0.05 m to 30 m range• Indirect distance and height or partial height calculation (3-point Pythagorean functions)• Precise, second-fast measurement of distances, areas, and volumes• Backlit multi-line display• Continuous measurement mode with Min / Max function• Addition and subtraction of the measurement results• Automatic storage of the last 10 measurement values• Robust construction – dust and splash water protected (IP54)• Measuring from front and back edge• Battery status indicator• Automatic switch-off• Hand strap• 3.7 V (200 mAh) lithium-ion battery, rechargeable via Micro-USB cable     scope of delivery   • Measuring device• Li-Ion battery (integrated)• Hand strap• Micro-USB-Kabel• User manual    Technical data  Measuring range distance resolution accuracy 0.05 - 30 m (= 0.17 - 98 ft) 1 mm ±3mm laser point at a distance of 10 m at a distance of 20 m at a distance of 30 m 10 mm 12mm 20mm Laser classes 2 laser power memory Retrieve last 10 measurements energy supply Li-Ion battery 3.7 V (integrated) 200mAh, 2000 measurements per battery charge Protection class IP54 Dimensions (H x W x D) 75 x 34 x 15 mm Weight 24 g Ambient temperature operation / storage 0 - 40 °C / -20 - 70 °C Trotec article no. 3.510.205.153 guarantee 2 years

Learn more More Fewer

Trotec BB20 Coating Thickness Gauge for Paints and Coatings With the Trotec BB20, you can measure the thickness of non-magnetic coatings on ferromagnetic and non-ferromagnetic metals. The dual sensor detects the substrate and is suitable, for example, for paint inspections on vehicles and quality checks of coated metal parts. Your Advantages Measurement range from 0 to 1,250 µm Measurement on iron/steel and non-ferrous metals Resolution from 0.1 µm in the lower measurement range Memory for up to 400 readings Statistical functions based on stored measurements Simple zero-point and multi-point calibration Typical Applications The BB20 helps to detect repaints, uneven coatings, or deviations in series measurements. For reliable results, the device must be calibrated appropriately for the respective substrate and placed flat on the measuring surface. Important: The measuring device determines the layer thickness but does not replace a professional assessment of the component or coating.

Learn more More Fewer

With this high-quality laser scanner, surfaces such as interior walls and facades can be quickly and easily checked for potential mold risk due to cold spots. The device allows for a non-contact measurement of the wall surface temperature using infrared and simultaneously automatically determines the dew point temperature value. The backlit LCD display ensures a clear and easily readable display of measurement values even in unfavorable lighting conditions. The integrated 20:1 dual laser visualizes the measurement spot on the respective measurement object. For dew point determination, the device additionally measures the current room temperature and humidity. Thanks to the acoustic and visual alarm function based on the traffic light principle, as well as the integrated bar graph indicator, the user quickly receives information even with larger measurement areas about whether the dew point has been reached or fallen below at a measurement point, thus indicating a risk of condensation and mold. 'Since a long-term increased relative humidity of about 70% is sufficient for the formation of mold on material surfaces, the device warns both acoustically and visually several degrees before the actual dew point. Therefore, it is worthwhile to check cold wall areas to detect condensation early and take preventive measures.'     "With 20:1 optics, always keep the measurement spot in view"   Measure the surface temperature of walls, materials, and objects contactlessly, meaning without touching the measurement object. To accurately assess the measurement area (measurement spot), the device is equipped with a dual laser pointer. This projects two laser points onto the surface to be measured, precisely marking the diameter of the measurement spot. In this area, the temperature value is captured by an infrared sensor, and an average value is determined. The rule is: the smaller the measurement spot, the more accurate the measurement, and the further the measuring device is from the measurement object, the larger the measurement spot diameter will be. Thanks to its geometric resolution of 20:1, the handheld measuring device also allows for accurate measurements from several meters away.     Recognizing mold risk   Since the device also has an air temperature sensor and an air humidity sensor (measuring range from 0% to 100% relative humidity) in addition to the infrared surface temperature measurement, the dew point temperature is automatically calculated from these 3 values. In addition to the exact values, an audible signal and/or the color of the LCD display will indicate whether the measured values are in the critical range, if desired.   Green Display: everything is fine Oranges Display: Measured values are approaching the critical dew point value Red Display: Temperature is dangerously close to the dew point or has already reached or fallen below it, allowing condensation to form.   With the increasingly faster beeping sound signal, you can also work by ear if desired. Especially for large area measurements on walls, you can quickly scan where critical points are located with the acoustic and/or optical alarm – all without having to pay attention to the exact measurement values. In addition, the bar graph indicator displayed on the screen provides quick orientation with an easily understandable bar chart and schematically shows you on a scale from 0% to 100% how close the measurement values have come to the dew point temperature.     Versatile   Due to the large temperature measurement range of -50 °C to 260 °C, this measuring device is recommended not only for use as a dew point scanner but also for other applications. The non-contact infrared measurement reliably protects you from surfaces that are too hot or too cold.   "Whether it's heating systems, hot pipes, tanks, boilers, engine blocks, control boxes, or deep-freeze storage – measure temperatures without burning your hands or getting "stuck" to icy surfaces. This device can even be used for preparing baby food when you want to quickly check the correct drinking temperature of the bottle from the outside."     With its compact dimensions, the lightweight device weighing only 163 g can be conveniently carried in a jacket pocket. Additionally, a practical carrying case for attachment to a belt is included in the delivery.   The infrared thermometer is powered wirelessly by the included 9-volt block battery. Thanks to the battery status indicator in the LCD display, you always have the current charge level in view. The automatic shut-off when not in use is energy-saving – allowing you to perform countless measurement tasks!     Advantages at a Glance   • Measurement of surface temperature, air temperature, humidity, and dew point temperature with just one device• Dew point alarm indication through display color change, alarm tone, and bar graph indicator• Non-contact surface temperature measurement via infrared from -50 °C to 260 °C• Messoptik 20:1• Messfleck diameter display via dual laser pointer• Backlit display• Auto shut-off• Practice-oriented German industrial design – protected design pattern• Optimal price-performance ratio   Scope of delivery   • Measuring device • 9V Battery• User manual• Protective bag     Technical data   Optical resolution (D:S) 20:1 Smallest measuring spot Ø 25.4 mm (Distance 508 mm) Measuring range sensor -50 to +260 °C Deviation Sensor ± 3.5 Deviation sensor at 20 °C 1 % ± 1.5 Measuring range of integrated temperature sensor 0 to +50 °C Dew point temperature -30 to +100 °C Dew point deviation ±2.0 % Measuring range humidity 0 to +100% r.h. Humidity Deviation ±3.5 % (between 20-80 % r.F.) Response time temperature sensor Spectral Sensitivity 8 - 14 µm Energy supply 1 x 9 V block battery (included in delivery) Masse (H x B x L) 82 x 58 x 168 mm Weight 163 g Trotec article no. 3.510.003.035 Guarantee 2 years

Learn more More Fewer

The BT20 from the MultiMeasure Basic series is a versatile penetration thermometer that stands out due to its wide measuring range of -40 °C to +250 °C for a variety of applications in gastronomy, trade, crafts, industry, laboratories, and hobbies. With its thin and long stainless steel measuring tip, the contact thermometer enables quick and reliable core temperature measurements with a response time of just 2 seconds. The hygienically easy-to-clean and food-safe plastic housing is additionally equipped with a rubberized soft-touch protective cover that ensures a secure grip and additional splash protection. Especially for food processors, service professionals, and food inspectors, the BT20 offers a simple and effective method for HACCP-compliant checking of food core temperature. However, the BT20 is also well-suited as a roasting thermometer for professional or private use. The practical advantages include quick and easy core temperature measurements, a wide measurement range, minimum, maximum, and hold functions, easy handling and cleaning, fast response time, rubberized soft-touch protective cover, food-safe plastic housing, stainless steel measuring tip, and an optimal price-performance ratio.

Learn more More Fewer

This data logger enables precise measurement and continuous documentation of climate data over long periods. With an impressive storage capacity of up to 32,000 measurement values, you can individually set the measurement cycle and the timing of data collection, thus tailoring it exactly to your needs. To ensure the integrity of the recorded data, the data logger is supplied with a lockable wall mount. This effectively protects the device from unauthorized access and tampering. Since the configuration of the data logger is carried out exclusively via a PC, unauthorized changes to the settings directly on the device are excluded. The evaluation and configuration of the recorded data can be conveniently done using the freely available MultiMeasure Studio software (STD). For more demanding analyses, the optional professional version of the software offers additional features, such as exporting data to Excel spreadsheet format or creating automated reports for comprehensive evaluation.Application examples • Proof of inspection obligation for craftsmen• Determination of causes of mold and moisture damage• Logging of climate data in archives and storage rooms     Scope of delivery   • Measuring device • Battery • PC analysis software • lockable wall mount • User manual • USB-Cable     Technical data   Measurement range air temperature -40 °C to +70 °C (-40 °F to +158 °F) Resolution Air Temperature 0.1 °C Accuracy Air Temperature max. ±1 °C Measuring range relative humidity 0 % r.H. to 100 % r.H. Resolution relative humidity 0.1 % r.F. Accuracy relative humidity max. 3 % r.F. Measured value memory total 32,000 measurement values16,000 for temperature and humidity Temperature display in °C and °F Dimensions L x W x H 94 x 50 x 32 mm Weight 91g including batteries Functions • Display of Maximum Value + Minimum Value• Display of date and time• Alarm function• freely selectable measurement cycle from 1 second to 24 hours• Permanent or ring recording  Trotec article no. 3.510.205.520 Guarantee 2 years

Learn more More Fewer

EPA-Ersatzfilter mit 95 % Abscheideleistung Passender Ersatzfilter für den TTK 70 HEPA (Plus) und Krüger Airsec 3 – EPA-Filter zur effektiven Filterung der Raumluft mit einer Abscheideleistung von 95 %. Dieser Ersatzfilter ist für den Trotec TTK 70 HEPA (Plus) sowie den Krüger Airsec 3 geeignet und unterstützt eine zuverlässige Filterung der angesaugten Raumluft. Mit einer Abscheideleistung von 95 % trägt der EPA-Filter dazu bei, feine Partikel aus der durch das Gerät geführten Luft abzuscheiden. Der Filter lässt sich einfach einsetzen und eignet sich für den regelmässigen Filterwechsel. Ein sauberer Filter unterstützt eine gute Luftzirkulation und trägt zu einem zuverlässigen Betrieb des Luftentfeuchters bei. Eigenschaften EPA-Filter 95 % Abscheideleistung Für TTK 70 HEPA (Plus) Für Krüger Airsec 3 Effektive Partikelfiltration EPA-Filter mit 95 % Abscheideleistung Der EPA-Filter verfügt über eine Abscheideleistung von 95 % und unterstützt damit die Filterung feiner Partikel aus der Raumluft. Die gefilterte Luft wird anschliessend wieder in den Raum abgegeben. Der Filter ist für den Einsatz im Trotec TTK 70 HEPA (Plus) und im Krüger Airsec 3 geeignet und lässt sich bei Bedarf einfach austauschen. Ein regelmässiger Filterwechsel unterstützt eine dauerhaft gute Luftzirkulation und einen zuverlässigen Betrieb des Gerätes. Alternative: Kombinationsfilter mit HEPA 13 und Aktivkohle Als Alternative zum EPA-Filter kann im Trotec TTK 70 HEPA (Plus) und im Krüger Airsec 3 auch der Kombinationsfilter aus HEPA 13 und Aktivkohle verwendet werden. Dieser kombiniert eine HEPA-13-Partikelfiltration mit einer zusätzlichen Aktivkohleschicht. Wichtig: Es kann jeweils nur einer der beiden Filter im Gerät eingesetzt werden. Entweder wird der EPA-Filter mit 95 % Abscheideleistung oder der Kombinationsfilter aus HEPA 13 und Aktivkohle verwendet. Beide Filter finden zusammen finden im Gerät keinen Platz. Ihre Vorteile EPA-Ersatzfilter für TTK 70 HEPA (Plus) und Krüger Airsec 3 95 % Abscheideleistung Unterstützt die Filterung feiner Partikel Einfacher und schneller Filterwechsel Unterstützt eine zuverlässige Luftzirkulation Alternative Verwendung des HEPA-13-Aktivkohle-Kombinationsfilters möglich Jeweils nur ein Filter gleichzeitig im Gerät erforderlich Filterwechsel Für eine dauerhaft gute Luftzirkulation sollte der EPA-Filter regelmässig kontrolliert und bei entsprechender Verschmutzung ausgetauscht werden. Die notwendige Wechselhäufigkeit hängt unter anderem von der Staubbelastung, der Raumluft und der Betriebsdauer des Luftentfeuchters ab. Wichtiger Hinweis: Beim TTK 70 HEPA (Plus) und beim Krüger Airsec 3 kann entweder der EPA-Filter mit 95 % Abscheideleistung oder der Kombinationsfilter aus HEPA 13 und Aktivkohle verwendet werden. Eine gleichzeitige Verwendung beider Filter ist nicht möglich.

Learn more More Fewer

Luftentfeuchter mit EPA-Filter TTK 70 HEPA – Entfeuchten und Luft reinigen in einem Gerät 18 Liter Entfeuchtungsleistung pro Tag, integrierte EPA-Luftfilterung und automatische Feuchteregelung für Wohnräume, Schlafzimmer, Keller und Räume bis 45 m². Extra grosser Tank. Der TTK 70 HEPA kombiniert zwei wichtige Funktionen für ein angenehmes Raumklima: Er reduziert zuverlässig überschüssige Feuchtigkeit und unterstützt gleichzeitig die Reinigung der Raumluft. Mit einer Entfeuchtungsleistung von 18 Litern pro Tag bei 30 °C und 80 % relativer Luftfeuchtigkeit eignet sich der leistungsstarke Luftentfeuchter für Räume bis zu 45 m². Der integrierte EPA-Filter mit einer Abscheideleistung von 95 % ergänzt die Entfeuchtung um eine zusätzliche Filterstufe für die Raumluft. Der Filter unterstützt die Reduzierung von Schimmelpilzsporen, Pollen, Hausstaubmilbenallergenen, Bakterien, Viren und Feinstaub aus der durch das Gerät geführten Luft. Damit eignet sich der TTK 70 HEPA insbesondere für Wohnräume, Schlafzimmer, Homeoffice, Kellerräume und Haushalte, in denen neben einer kontrollierten Luftfeuchtigkeit auch Wert auf eine verbesserte Raumluftqualität gelegt wird. Die intelligente Feuchteautomatik überwacht die relative Luftfeuchtigkeit und ermöglicht eine komfortable Regelung des gewünschten Feuchtewertes. Eine integrierte Luftqualitätsanzeige informiert zusätzlich über den aktuellen Zustand der Raumluft. Die frontseitige Farb-LED macht die Kontrolle besonders einfach: Der aktuelle Zustand wird auf einen Blick angezeigt. Mit seinem grosszügigen Wassertank, dem praktischen Schlauchanschluss und der Auto-Restart-Funktion eignet sich der TTK 70 HEPA auch für längere Betriebszeiten. Das natürliche Kältemittel R290 mit einem GWP von 3 unterstützt zudem einen umweltbewussten und effizienten Betrieb. Eigenschaften: 2-in-1: Luftentfeuchter und Luftreiniger 18 Liter Entfeuchtungsleistung pro Tag Für Räume bis 45 m² Integrierter EPA-Filter 95 % Abscheideleistung Filterung verschiedener Luftschadstoffe und Partikel Anzeige der Luftqualität Anzeige der Raumtemperatur Automatische Feuchteregelung LED-Display und Farb-LED Auto-Restart-Funktion Kindersicherung Direkter Schlauchanschluss Natürliches Kältemittel R290 GS-geprüft Luftentfeuchter und Luftreiniger in einem Gerät Ein herkömmlicher Luftentfeuchter reduziert die Feuchtigkeit, während ein Luftreiniger hauptsächlich Partikel aus der Raumluft filtert. Der TTK 70 HEPA verbindet beide Funktionen in einem kompakten Gerät und schafft damit eine praktische Lösung für die Feuchtigkeitsregulierung und Luftreinigung. Während der Kompressor der Raumluft Feuchtigkeit entzieht, wird die durch das Gerät strömende Luft zusätzlich über den EPA-Filter geführt. So lässt sich die Raumfeuchtigkeit kontrollieren und gleichzeitig die Raumluft von verschiedenen Partikeln entlasten. Das Gerät eignet sich damit für alle, die einen Luftentfeuchter mit Luftfilter suchen und nicht zwei separate Geräte aufstellen möchten. EPA-Filter mit 95 % Abscheideleistung Der integrierte EPA-Filter erweitert den TTK 70 HEPA um eine zusätzliche Funktion zur Reinigung der Raumluft. Mit einer Abscheideleistung von 95 % reduziert die Filterstufe einen grossen Teil der im Luftstrom enthaltenen Partikel. Der EPA-Filter kann dabei insbesondere bei Pollen, Staub, Feinstaub, Schimmelpilzsporen und weiteren in der Raumluft vorhandenen Partikeln unterstützen. Dadurch ist der TTK 70 HEPA nicht nur als Luftentfeuchter, sondern auch als Luftreiniger mit EPA-Filter interessant. Der Filter sollte entsprechend der Nutzung regelmässig kontrolliert und gereinigt beziehungsweise bei Bedarf ersetzt werden. Die genauen Hinweise zur Filterpflege und zum Filterwechsel sind der jeweiligen Bedienungsanleitung zu entnehmen. Luftentfeuchter gegen Schimmel – Feuchtigkeit gezielt reduzieren Zu hohe Luftfeuchtigkeit kann insbesondere an kalten Oberflächen die Bildung von Kondenswasser begünstigen und damit ein ungünstiges Raumklima schaffen. Ein Luftentfeuchter gegen Schimmel setzt deshalb an einer wichtigen Ursache an: Er reduziert überschüssige Feuchtigkeit in der Raumluft. Der TTK 70 HEPA unterstützt die automatische Kontrolle der Raumfeuchtigkeit und hilft dabei, einen angenehmen Feuchtebereich einzuhalten. Gleichzeitig kann der integrierte EPA-Filter Partikel aus der durchströmenden Raumluft abscheiden. Wichtig: Bei bereits vorhandenem, grösserem Schimmelbefall ersetzt ein Luftentfeuchter keine fachgerechte Ursachenanalyse und Sanierung. Bauliche Ursachen wie eindringende Feuchtigkeit, Wärmebrücken oder undichte Stellen müssen unabhängig davon behoben werden. Angenehmes Raumklima für Wohnräume und Allergiker Gerade in Wohnräumen entstehen täglich unterschiedliche Feuchtigkeitsquellen: Duschen, Kochen, Wäschetrocknen und die normale Nutzung eines Raumes erhöhen die Luftfeuchtigkeit. Gleichzeitig gelangen Pollen, Staub und andere Partikel in die Raumluft. Der TTK 70 HEPA verbindet deshalb Feuchtigkeitsregulierung und Luftfilterung. Mit einer Entfeuchtungsleistung von 18 Litern pro Tag bei 30 °C / 80 % r.F. eignet er sich für Räume bis zu 45 m². Die automatische Regelung sorgt für einen komfortablen Betrieb, ohne dass die gewünschte Luftfeuchtigkeit ständig manuell kontrolliert werden muss. Die integrierte Kindersicherung verhindert zudem unbeabsichtigte Änderungen der Einstellungen. Luftqualitätsanzeige mit praktischer Farb-LED Der TTK 70 HEPA macht den Zustand der Raumluft einfach sichtbar. Die integrierte Farb-LED zeigt den aktuellen Luftzustand auf einen Blick an. Dadurch lässt sich schnell erkennen, ob die Raumluft im gewünschten Bereich liegt oder eine Anpassung der Einstellungen sinnvoll ist. Zusätzlich zeigt das Gerät wichtige Informationen zum aktuellen Raumklima an. Damit stehen relevante Werte für die Kontrolle von Luftfeuchtigkeit und Raumluftqualität direkt am Gerät zur Verfügung. Automatische Feuchteregelung für komfortablen Betrieb Die integrierte Feuchteautomatik übernimmt die Regelung der Luftfeuchtigkeit automatisch. Dadurch muss das Gerät nicht ständig manuell ein- und ausgeschaltet werden. Der TTK 70 HEPA passt seinen Betrieb an die gemessene Raumfeuchtigkeit an und unterstützt so ein konstant angenehmes Raumklima. Das ist besonders praktisch im Schlafzimmer, Wohnzimmer, Homeoffice oder Keller, wenn die Luftfeuchtigkeit über längere Zeit kontrolliert werden soll. Für längeren Betrieb mit Schlauchanschluss Für einen besonders komfortablen Betrieb kann das Kondenswasser über den vorhandenen Schlauchanschluss direkt abgeleitet werden. Dadurch ist auch ein längerer beziehungsweise unbeaufsichtigter Betrieb möglich, sofern der Kondensatablauf entsprechend eingerichtet wird. Damit eignet sich der TTK 70 HEPA nicht nur für Wohnräume, sondern auch für Kellerräume, Hobbyräume und andere Bereiche, in denen eine kontinuierliche Entfeuchtung erforderlich ist. Auto-Restart-Funktion für einen zuverlässigen Betrieb Nach einer Unterbrechung der Stromversorgung kann das Gerät dank der Auto-Restart-Funktion automatisch wieder in Betrieb gehen. Dadurch eignet sich der TTK 70 HEPA auch für einen Betrieb, bei dem das Gerät nicht ständig manuell gestartet werden soll. Natürliches Kältemittel R290 Der TTK 70 HEPA verwendet das natürliche Kältemittel R290 (Propan). Dieses Kältemittel besitzt ein sehr niedriges Treibhauspotenzial mit einem GWP von 3 und wird zunehmend in modernen Kälte- und Klimageräten eingesetzt. Die Verwendung von R290 verbindet die leistungsfähige Kompressortechnik des Luftentfeuchters mit einem Kältemittel mit geringem Treibhauspotenzial. Vorteile des TTK 70 HEPA im Überblick Leistungsstarker Luftentfeuchter mit 18 Litern pro Tag bei 30 °C / 80 % r.F. Für Räume bis 45 m² geeignet Extragrosser 6.5 Liter Tank Zusätzliche Luftreinigung durch integrierten EPA-Filter 95 % Abscheideleistung des Filters Geeignet zur Reduzierung verschiedener Partikel aus der Raumluft Automatische Regelung der Raumfeuchtigkeit Anzeige der Luftqualität Praktische Farb-LED zur schnellen Kontrolle Direkter Schlauchanschluss für längeren Dauerbetrieb Auto-Restart-Funktion nach Stromunterbrechung Integrierte Kindersicherung Natürliches Kältemittel R290, GWP 3 GS-geprüft Geeignet für diese Einsatzbereiche Wohnzimmer und offene Wohnbereiche Schlafzimmer Homeoffice und Arbeitszimmer Keller und Hobbyräume Räume mit erhöhter Luftfeuchtigkeit Räume mit erhöhter Staubbelastung Wohnräume während der Pollensaison Haushalte, in denen zusätzlich zur Entfeuchtung eine Luftfilterung gewünscht wird Bereiche 4 bis ca. 45 m² Technische Daten Gerätetyp Luftentfeuchter mit EPA-Luftfilterung Gerätefunktion Luftentfeuchtung und Luftfilterung Entfeuchtungsleistung bei 30 °C / 80 % r.F. 18 Liter / Tag Minimale / maximale Raumgrösse 4 / 45 m² Filter Vorfilter + austauschbarer EPA-Filter, 1 St. im Lieferumfang Filter-Abscheideleistung 95 % Farb-LED zur Luftqualitätsanzeige ja Automatische Feuchteregelung ja Anzeige der Raumfeuchtigkeit ja Anzeige der Raumtemperatur ja Auto-Restart ja Kindersicherung ja Wassertank 6.5 Liter Wasserstandsanzeige ja Automatische Abschaltung bei vollem Wassertank ja Schlauchanschluss ja, passender Schlauch: 10 mm Innendurchmesser Kältemittel R290 (Propan) / 60 g GWP (Global Warming Potential) 3 Kältemittelmenge gemäss Typenschild Betriebsart Kompressor-Luftentfeuchtung Abtauautomatik ja Ventilator integriert Netzanschluss 230 V / 50 Hz Ca. 1.8 m Anschlusskabel mit EU-Stecker + Fixadapter für die Schweiz Leistungsaufnahme 420 W Masse (H x B x T) 565 x 340 x 225 mm Schalldruckpegel 48 dB(A) Umgebungstemperatur 5 – 32 °C Relative Luftfeuchtigkeit gemäss Herstellerangabe Gewicht 13 kg Zertifikate GS-geprüft Garantie 2 Jahre Häufige Fragen zum Luftentfeuchter mit EPA-Filter TTK 70 HEPA Was ist ein EPA-Filter? EPA steht für Efficient Particulate Air. EPA-Filter gehören zu den hocheffizienten Partikelfiltern und werden zur Abscheidung feiner Partikel aus der Luft eingesetzt. Der EPA-Filter des TTK 70 HEPA verfügt über eine angegebene Abscheideleistung von 95 %. Wie viel Wasser entzieht der TTK 70 HEPA der Luft? Die angegebene Entfeuchtungsleistung beträgt 18 Liter pro Tag bei 30 °C und 80 % relativer Luftfeuchtigkeit. Die tatsächlich erzielte Entfeuchtungsleistung hängt von den jeweiligen Raumbedingungen ab. Für welche Raumgrösse ist der TTK 70 HEPA geeignet? Der TTK 70 HEPA ist für Räume bis etwa 45 m² geeignet. Die tatsächlich erforderliche Leistung kann abhängig von Raumhöhe, Temperatur, Feuchtebelastung, Bausubstanz und Nutzung variieren. Ist der TTK 70 HEPA ein Luftreiniger? Der TTK 70 HEPA kombiniert die Funktionen eines Luftentfeuchters und Luftfilters. Die Raumluft wird zusätzlich zur Entfeuchtung über den integrierten EPA-Filter geführt. Dadurch kann das Gerät neben der Feuchtigkeitsreduzierung auch zur Reduzierung von Partikeln in der Raumluft beitragen. Hilft der TTK 70 HEPA gegen Schimmel? Durch die Reduzierung der Raumfeuchtigkeit kann das Gerät Bedingungen entgegenwirken, die Schimmelwachstum begünstigen. Der EPA-Filter kann zusätzlich Partikel wie Schimmelpilzsporen aus der durchströmenden Raumluft abscheiden. Bei bestehendem Schimmelbefall müssen jedoch auch die Ursachen der Feuchtigkeit fachgerecht behoben werden. Kann der TTK 70 HEPA dauerhaft betrieben werden? Ja. Über den direkten Schlauchanschluss kann das Kondenswasser kontinuierlich abgeleitet werden. Dadurch ist ein längerer beziehungsweise unbeaufsichtigter Betrieb möglich, sofern der Kondensatablauf fachgerecht eingerichtet ist. Welches Kältemittel verwendet der TTK 70 HEPA? Der TTK 70 HEPA verwendet das natürliche Kältemittel R290 (Propan) mit einem GWP von 3.

Learn more More Fewer

Aqueous dispersion for leak testing on water-bearing levels, drains and downpipes. With fluorescent material that becomes visible under UV light. Proven UV dye for pipe burst detection, available in various colors. This dispersion is dilutable with water. In the visible wavelength range, it leaves virtually no recognizable traces; however, when illuminated with UV light, it glows intensely. The product is particularly suitable for leak testing on water-bearing levels of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent material can be detected and made visible under UV light. Further applications can be found in non-destructive testing (NDT) and in leak detection, where capillary action is secondary and no visible traces of the UV tracer should remain. To ensure that users have the optimal UV fluorescent dye for every task, the product is now available in four brightly glowing colors. In addition to the established green version, red, blue, and purple are now also available. Important: Luminat is not suitable as a food coloring. Scope of delivery 1 bottle with 1 liter of yellow dye Advantages at a glance • Proven UV tracer for pipe burst detection • No metabolism – ideal for long-term investigations • Very intense color glow under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100% formaldehyde-free fluorescent dye, manufactured in Germany • Available in various colors – for every environmental condition and preference

Learn more More Fewer

The Trotec Turbo Fan TFV 20 is a powerful industrial fan for construction drying, water damage drying, and ventilation. As a compact and robust radial fan, it ensures rapid drying and strong air circulation with an air output of up to 1185 m³/h. It is ideally designed for tough, professional use on construction sites and in commercial environments. Targeted Airflow and System Drying Multiple Setup Angles: The well-thought-out housing design allows for three different setup angles. This means the strong, directed airflow can be aimed with high flexibility and precision at the floor, wall, or carpet surfaces to be dried. Optimal Combination: Due to the enormous acceleration of surface evaporation, the turbo fan is excellently suited for combined use with professional dehumidifiers to drastically shorten remediation processes. Advantages at a Glance High Airflow: Up to 1,185 m³/h for noticeably faster drying results Renovation Professional: Perfectly suited for water damage, construction drying, and industrial ventilation Targeted Airflow: 3 setup angles for needs-based alignment of airflow Construction Site Suitable: Robust, durable housing for commercial and harsh environments Excellent Mobility: Compact design, space-saving stackable, and especially easy to transport Technical Data Basic Data & Performance Device Type Turbo Fan / Radial Fan Application Area Construction drying, water damage, industrial ventilation Air output max. 1,185 m³/h Airflow Strong, directed Construction, Mobility & Warranty Housing Design Robust, construction site-suitable housing Setup Positions 3 selectable setup angles Storage & Transport Stackable and compact Warranty 2 years

Learn more More Fewer

Thanks to its high air output and PTC ceramic heating coil technology, the powerful TDS 30 M rapid heater is suitable for quickly heating large, cool rooms. It is operated with three-phase current (380-400 V) and offers a maximum heating output of 5 kW in two stages, supplemented by a cold air mode. PTC technology and its advantages Compared to heating coils, the durable PTC ceramic heating element ensures a more homogeneous, draft-free warm air flow with less noise. PTC registers automatically regulate power consumption depending on the ambient temperature, which ensures automatic overheating protection. As no dust combustion takes place, the room air is not burdened with additional fine dust. Self-regulation: Leads to significantly fewer temperature fluctuations and a more even room temperature. Positioning the control below the heater protects against overheating and improves reliability compared to differently constructed devices. Safety: Integrated overheating protection, thermal protection and fan motor overrun function. Air: Condensate-free heat without oxygen consumption. Operation: Stepless thermostat and heat-insulated carrying handle for easy transport. Areas of application The robust and stable construction allows for use in: Workshops (car workshops, warehouses and production halls) Construction sites and assembly operations Catering and greenhouses Technical data Trotec item no. 1410000054 Heating element PTC ceramic heating element Operating principle electric Housing design Metal Fan type axial Storage capacity stackable Dimensions and weight Length without packaging 250 mm Width without packaging 205 mm Height without packaging 360 mm Weight without packaging 4 kg Weight including packaging 5 kg Performance and power supply Mains connection and frequency 380 - 400 V, 50 Hz Connection plug CEE 16 A, 5-pin Rated current consumption 7.6 A Power consumption 5 kW Recommended fuse protection 10 A Cable length 1.15 m Heating power and air volume Stages 1: Ventilation only (0.05 kW)2: Ventilation + heating (3.3 kW)3: Ventilation + heating (5 kW) Max. heating output 5 kW (4300 kcal/h) Max. air volume (type) 575 m³/h Fan stages 1 Max. temperature increase (at 1 m distance) 90 °C Operating conditions and safety Temperature range min./max. -15 °C to 25 °C Sound level (at 1 m distance) 53 dB(A) IP protection class IP20 Overheating protection 98 °C Functions (protection) Overheating protection, auto-restart function Mobility Carrying/transport handle(s), feet Warranty 2 years

Learn more More Fewer

Dark Radiator IRD 3200 The powerhouse of the IRD series: Invisible heat for spacious outdoor areas up to 21 m². The IRD 3200 redefines premium heating. With an impressive 3200 watts, it is the ideal solution for large terraces or upscale outdoor catering. As a dark radiator, it completely dispenses with brightly lit heating tubes. Instead, it uses a concealed stainless steel heating coil to generate even, glare-free infrared heat that does not disturb the architectural lighting concept. Light-free design: Aesthetic warmth without disturbing red light – perfect for discerning requirements. High performance: Effective area of up to 21 m² with 3.2 kW heating power. Weatherproof (IP55): Optimal protection against dust, splash, and jet water outdoors. Smart control: 3 heating levels, 24-hour timer, and LED display via remote control. ⚠️ Important Installation Note (Switzerland):Due to its high power of 3.2 kW, this device requires protection of at least 16 amperes. The IRD 3200 comes with a 1.8 m connection cable and a T23 fixed adapter, which is designed for corresponding heavy-current sockets (rectangular pins) or construction power distributors. Features Allergy-friendly: Does not stir up dust, odorless and silent. Maintenance-free: No tube changes necessary thanks to stainless steel heating element. Mounting kit: Wall and ceiling bracket included. Flexible: Tilt angle adjustable by 45° for precise alignment. Heating Levels Level 1: 1.07 kW Level 2: 2.14 kW Level 3 (Max): 3.20 kW Technical Specifications Effective Area max. 21 m² Housing Aluminum design housing Dimensions (L x H x D) 1815 x 200 x 55 mm Weight 13.5 kg Electrical Data 230V / 13.9A (16A fuse required) Warranty 2 years

Learn more More Fewer

Infrared Dark Radiator IRD 2400 – Designer Heat without Red Light Elegant warmth for upscale outdoor areas: Powerful, silent, and completely glare-free. The IRD 2400 is the perfect solution for patios, balconies, and outdoor catering where aesthetics are paramount. As a dark radiator, it generates pleasant infrared heat via a concealed stainless steel heating coil – entirely without the distracting red glow of conventional devices. The high-quality aluminum design seamlessly integrates into any architecture. No light effect: Ideal for harmonious lighting concepts without disturbing red light. Weatherproof (IP55): Dust, splash, and jet water protected for outdoor use. Allergy-friendly: Clean heat without dust turbulence or odors. Convenient control: Includes infrared remote control and 24h timer. Note on connection: Due to the power of 2400W, a fuse of at least 13A is required. The device comes with a 1.8 m connection cable and a T23 fixed adapter. Areas of Application Upscale outdoor catering Private patios and balconies Sheltered outdoor areas Architecturally sophisticated environments Comfort Functions 3 heating levels: 0.8 kW / 1.6 kW / 2.4 kW Flexibility: Wall or ceiling mounting (45° tiltable) Maintenance-free: No tube change required LED display: Shows current level Technical Specifications Max. heating power 2400 Watt (effective area up to 16 m²) Mains connection 220 - 240 V, 50/60 Hz (1.8 m cable) Housing & protection class Aluminum / IP55 Dimensions (L x W x H) 1460 x 200 x 55 mm Weight 11.5 kg Warranty 2 years

Learn more More Fewer

With a high blower output of a maximum of 1785 m³/h, the powerful 18kW "Trotec TEH 100" electric fan heater ensures rapid heating of large rooms. For a secure hold of the connected warm air hose, the heater is equipped with a heat-insulated connection piece including a special hose support ring. An integrated discharge grille also promotes a directed warm air flow.The robust construction made of protective-coated sheet steel encloses a specially developed, flow-optimized chassis. This design maximizes system efficiency by enabling a focused hot air flow without turbulence losses, even over hose lengths of up to 15 m. The robust step switching allows for demand-driven power regulation. Level one activates the fan; levels two to four increase the heating output in parallel in three stages to the maximum value. Thanks to an identical stacking groove, the multi-stackable electric heater can be stacked flexibly and in a space-saving manner with models of the same dimensions, such as the TEH 70. This allows for space-saving storage and flexible, individual heating setups in use, such as 180-degree stacking installations for air distribution in multiple directions. The 360-degree rotating transport wheels facilitate relocation. In stacking installations, the wheels, locked by a roll-stop latch in the stacking groove, provide stable support.   Technical and Practical Advantages at a Glance Particularly durable sheet steel construction with a resistant protective coating. Flow-optimized chassis for a focused, turbulence-free warm air flow. Practical stacking groove for stable, space-saving storage and transport. Double-walled housing for minimized heating of the outer casing. Extremely maintenance-friendly design. Robust Trotec Ergo grip recesses with internal grip clip for optimal carrying comfort. Practice-optimized German industrial design (protected design patent). Multi-stackability with models of the same dimensions.  Technical Data Trotec item no. 1410000220 Product Information Max. stacking height 3 Storage capacity stackable Fan type axial   Dimensions and Weight Length without packaging 465 mm Length with packaging 435 mm Width without packaging 425 mm Width with packaging 495 mm Height without packaging 555 mm Height with packaging 600 mm Weight without packaging 27.5 kg Weight including packaging 29.5 kg Hose connection diameter 300 mm Max. hose length 15 m   Electrical and Heating Data Operating principle electric Heating element stainless steel heating coil Nominal current consumption 27.3 A Mains connection and frequency 400 V, 50 Hz Power consumption / Max. heating output 18 kW Recommended fuse protection 32 A Cable length 0.75 m Connection plug designation CEE 32 A | 5-pole Overheat protection 60 °C   Performance Values (Heating Output / Air Volume) Max. air volume 1785 m³/h Fan stages 1 Heating output stage 1 0 kW (fan operation) Heating output stage 2 9 kW / 7740 kcal Heating output stage 3 13.5 kW Heating output stage 4 / Max. 18 kW / 15'480 kcal Max. temperature increase 38 °C   Features and Mobility Housing design Metal Mobility Carrying/transport handle(s), rubberized metal wheels Functions On/off switch, overheat protection Other Data Sound pressure level (at 1 m distance) 73 dB(A) Optional (accessories) Extension cable, external thermostat, hoses (300-305 mm), universal tension belt

Learn more More Fewer

The synthetic pre-filter mat with high dust storage capacity acts as the first filter stage of the AirgoClean One, retaining coarser household dust, textile fibers, and pet hair from the room air.

Learn more More Fewer

The F7 class (ISO ePM10 85%) fine dust filter serves as a pre-filter for the H14 HEPA filter and separates pollen and finer particles ≤ 10 µm with a minimum separation efficiency of 85%.

Learn more More Fewer

The activated carbon filter effectively neutralizes tobacco odors, pet odors, kitchen odors, smoke odors, as well as formaldehyde and solvent odors from the ambient air. The activated carbon filter can be installed in filter compartment 3 instead of the silencer, if required.

Learn more More Fewer

Filters particle sizes from 0.1 - 0.3 µm, such as viruses, bacteria, and fine dust, with an efficiency of ≥ 99.995% each time the air passes through the device.

Learn more More Fewer

A powerful silencer for efficient noise reduction of the air purifier for pleasantly quiet operation. The sound absorber has been extensively flow-optimized so that it is volume flow neutral and creates virtually no flow resistance.

Learn more More Fewer

The Trotec axial fan TTV 4500 HP is a particularly robust professional fan for demanding applications in commerce, industry, and technical drying. With a maximum air output of 4,800 m³/h, a high air pressure of 160 Pa, and an air outlet velocity of 9.3 m/s, the device is ideal for targeted air conveyance over longer distances as well as for supporting professional drying processes. Powerful axial fan for professional use The TTV 4500 HP was specially developed for tough continuous use. The combination of a powerful axial fan, high pressure performance, and robust construction enables reliable air conveyance on construction sites, renovations, industrial applications, and water damage restoration. With its three fan stages, the air performance can be flexibly adapted to the respective application. The fan can be used freestanding or combined with air transport hoses or dust bags. This makes it particularly suitable for ventilation, extraction, dust extraction, and the transport of cold or warm air over long distances. High pressure performance:With a maximum air pressure of 160 Pa, the TTV 4500 HP reliably transports air even over longer hose lengths. Flexible application:Three power levels and extensive accessories allow individual adaptation to different ventilation and drying tasks. Robust construction for professional continuous operation The resistant housing and high-quality technology are designed for daily use under demanding conditions. The IP55 protection class reliably protects the fan against dust and splash water. Thanks to its compact design, stacking function, and low weight, the TTV 4500 HP is easy to transport and store in a space-saving manner. This makes the device particularly suitable for mobile deployment teams and rental companies. Your advantages at a glance Maximum air output up to 4,800 m³/h High air pressure up to 160 Pa Three fan stages Air outlet velocity up to 9.3 m/s Suitable for air transport hoses and dust bags Ideal for construction drying and water damage restoration Robust professional housing Splash-proof according to IP55 Stackable for space-saving storage Suitable for continuous operation Professional air conveyance over long distances 2-year warranty Technical data Air output & Performance Air volume level 1 2,000 m³/h Air volume level 2 3,000 m³/h Air volume level 3 4,500 m³/h Nominal air volume 2,850 m³/h at 160 Pa Fan type Axial fan Air flow Exhausting / sucking Air outlet velocity 9 m/s (32.4 km/h) Throw distance 60 m Max. air pressure 160 Pa Max. conveying medium temperature 45 °C Electrical data Mains connection 230 V / 50 Hz, EU plug with fixed adapter for Switzerland Power consumption 0.33 kW Current consumption 1.4 A Fusing 10 A Protection class IP55 Safety class I Features & Use Hose connection Ø 450 mm Combination distributor 8 × Ø 100 mm possible Dust bag connection Yes (optional) Carry handle Integrated Mobility Portable and stackable Permissible ambient temperature -25 °C to +40 °C Areas of application Building drying, water damage restoration, ventilation and aeration, dust extraction, industry and trade Dimensions & Construction Housing material Robust plastic housing for professional use Motor Powerful electric motor with thermal overload protection Mobility Portable and stackable Permissible ambient temperature -25 °C to +40 °C Sound pressure level (max., 3 m distance) 64 dB(A) Dimensions (L × W × D) 358 × 515 × 520 mm Weight 13.5 kg Trotec item no. 1.510.000.012 Warranty 2 years Areas of application The Trotec TTV 4500 HP was developed for professional applications where high air conveyance performance and increased air pressure are required. Particularly in construction drying, water damage restoration, and technical building drying, the fan supports faster drying through targeted air movement. By connecting air transport hoses or a combination distributor, air can be guided specifically into hard-to-reach areas. This makes the device particularly suitable for cavities, shafts, large rooms, and industrial applications. Professional air conveyance for demanding applications The TTV 4500 HP combines high performance, robust construction, and flexible application possibilities. The three power levels, IP55 protection class, and stackable design make this axial fan a reliable tool for tradesmen, restoration companies, and professional users.

Learn more More Fewer

Trotec TEH 20 T Electric Heater – Professional Quality in Industrial Design Focused warm air for the toughest applications: Robust, stackable, and precisely adjustable. The TEH 20 T impresses with its functional German industrial design and an extremely robust sheet steel housing with protective coating. Thanks to the flow-optimised chassis, the hot air is directed precisely without turbulence. The double-walled housing minimises the heating of the outer casing, which significantly increases operational safety. Important note on connection (Switzerland): Due to its power consumption (11.4 A), the device is supplied with a T23 fixed adapter. This fits into T23 sockets (rectangular pins, 13A/16A fuse protection) as well as into power distributors with T25 sockets. It is not compatible with conventional household sockets (T13). Highlights Precise Control: Stepless thermostat for constant room temperature. Trotec Ergo-Grip: Secure hold thanks to innovative grip recess with Grip-Clip. Stacking System: Safely stackable thanks to practical grooves on the top. Easy Maintenance: Designed for durable professional use. Key Facts Heating Power: 2.5 kW (2150 kcal) Airflow: Focused jet via axial fan Hose Connection: 155 mm diameter (max. 7m length) Safety: Integrated overheating protection (60 °C) Technical Data Power / Current Consumption 2.5 kW / 11.4 A (recommended fuse protection 16 A) Power Connection 230 V / 50 Hz (2.75 m cable incl. T23 adapter) Dimensions (L x W x H) 325 x 260 x 332 mm Weight 10.5 kg Sound Pressure Level 62 dB(A) (1 m distance) Warranty 2 years

Learn more More Fewer