Airlock 100: The smart window seal Immediately increase the efficiency of your mobile air conditioner. Keeps the heat out, the cool air in, and unwanted insects away. Anyone who uses a mobile air conditioner knows the problem: the exhaust hose must be routed outside through an open window – but warm air constantly flows back through the gap. The Airlock solves this problem simply and reliably. Thanks to the robust special fabric with a zipper, the window opening is sealed. This saves a lot of energy, as the air conditioner cools the room much faster and the heat load from outside is minimized. Your advantages: Noticeably lower room temperature Lower electricity consumption Protection against mosquitoes & insects Window can still be closed Washable at 40° C Easy installation without drilling Installation is as uncomplicated as attaching a mosquito net: The self-adhesive Velcro tape is attached to the window frame and the window itself. Then the fabric is attached with Velcro. The double zipper allows the exhaust hose to be fixed in any desired position. Tip: Do not stretch the fabric too tightly in the corners, so the window can be closed easily even with the stopper mounted. Which size do you need? Measure the three open sides of your window (circumference): Model Max. circumference Suitability Standard version (this product here) 400 cm Common casement, tilt, or skylight windows XL version (Airlock 1000) 560 cm Large windows, balcony doors, or floor-to-ceiling windows Trotec Article No. 6.100.002.004    Frequently Asked Questions (FAQ) Does it work on skylights?Yes, provided they are skylights that open on one side (not for centrally rotating pivot windows). Will my air conditioner fit?The system is universally compatible with all devices that use a flexible exhaust hose (and also for mobile split units like the "Ulisse" series). Is the fabric weatherproof?The material is water-repellent and robust. If it gets dirty, it can be easily cleaned on a gentle cycle at 40° C.

Learn more More Fewer

Ideal for venting the moist warm air from 2-hose air conditioning units. The exhaust hoses are installed in 99% of all cases at an open window."Without an intelligent window installation, such a solution operates extremely inefficiently, as warm outside air continuously flows back in through the window opening, partially negating the cooling performance of the air conditioning unit. In other words: Your mobile air conditioner must not only cool the warm indoor air but also the incoming outside air. This clever sealing fabric significantly increases energy efficiency." This practical helper can be attached to any type of window with just a few simple steps and reliably prevents the backflow of warm outside air into the air-conditioned interior, as well as the intrusion of insects. When installed correctly, the window can be closed as usual without having to remove the fabric. The translucent fabric is made from a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The acquisition costs have already paid off in a very short time.  Easy construction  The sealing cloth is attached using the included Velcro tape, which can be removed at any time, similar to mosquito nets. Cleaning in the washing machine is also easily possible.  Suitable for air conditioning units with dual hose technology Air conditioning units with dual hose technology operate with two separate air paths. Commercially available window seals usually only have a zipper opening and are therefore not suitable for use with dual hose devices. This "Airlock" has two openings, allowing for the variable attachment of one "or" two exhaust hoses. If only one opening is needed, the zipper closes the second one invisibly and airtight.  Maximum circulation 560 cm The sum of the three open sides must not exceed 560 cm for this model. This is usually sufficient to also encompass tilted balcony doors. For standard-sized windows, please also consider the model "Airlock200."  Advantages at a Glance • Increases cooling performance, reduces energy consumption• Suitable for large casement windows, large tilt windows, and tilted balcony doors • For air conditioning units with single hose and dual hose technology• Prevents the intrusion of warm air and insects• The window can be closed despite the window sealing.• Amortizes in no time at all• Easy self-assembly  Trotec Article No. 6.100.002.004

Learn more More Fewer

"Extension cable 2 m for Ulisse 13dci, suitable for devices with cooling function (without heating)."In this connection line, there are copper tubes with refrigerant as well as the water hose, which directs the condensate from the interior to the outside (where it is misted with ventilation). If you want to run or extend the line through a wall, the outdoor unit must be disconnected from the line. This process is feasible with some technical understanding (instructions included in the delivery). However, in case of doubt, we recommend consulting a climate specialist, as improper work can lead to refrigerant leakage. Before disconnecting the outdoor unit, the device should be in operation for a few minutes to build up pressure in the line and ensure that the check valves close properly during disconnection. If you have any questions or uncertainties, we are happy to provide information.ImportantThe latest Ulisse devices use refrigerant R32 (propane). If you want to extend the lines for this version, you must use the R32 line; otherwise, use the R410A. The refrigerants are NOT compatible with each other. Therefore, please check the nameplate of the air conditioning unit to see which refrigerant you need. A return of opened line packages is NOT possible.  Technical data Suitable for devices with cooling function (without heating), refrigerant R32Length 2 m

Learn more More Fewer

"Extension cable 2 m for Ulisse 13dci, suitable for devices with cooling function (without heating)."In this connection line, there are copper tubes with refrigerant as well as the water hose, which directs the condensate from the interior to the outside (where it is misted with ventilation). If you want to run or extend the line through a wall, the outdoor unit must be disconnected from the line. This process is feasible with some technical understanding (instructions included in the delivery). However, in case of doubt, we recommend consulting a climate specialist, as improper work can lead to refrigerant leakage. Before disconnecting the outdoor unit, the device should be in operation for a few minutes to build up pressure in the line and ensure that the check valves close properly during disconnection. If you have any questions or uncertainties, we are happy to provide information.ImportantThe latest Ulisse devices use refrigerant R32 (propane). If you want to extend the lines for this version, you must use the R32 line; otherwise, the R410A. The refrigerants are NOT compatible with each other. Therefore, please check the nameplate of the air conditioning unit to see which refrigerant you need. A return of opened line packages is NOT possible.  Technical data Suitable for devices with cooling function (without heating), refrigerant R410ALength 2 m

Learn more More Fewer

Extension cable 4 m for Ulisse 13dci, suitable for devices with cooling function (without heating).In this connection line, there are copper tubes with refrigerant as well as the water hose, which directs the condensate from the interior to the outside (where it is misted with ventilation). If you want to run or extend the line through a wall, the outdoor unit must be disconnected from the line. This process is feasible with some technical understanding (instructions included in the delivery). However, in case of doubt, we recommend consulting a climate specialist, as improper work can lead to refrigerant leakage. Before disconnecting the outdoor unit, the device should be in operation for a few minutes to build up pressure in the line and ensure that the check valves close properly during disconnection. If you have any questions or uncertainties, we are happy to provide information.ImportantThe latest Ulisse devices use refrigerant R32 (propane). If you want to extend the lines for this version, you must use the R32 line; otherwise, use the R410A. The refrigerants are NOT compatible with each other. Therefore, please check the nameplate of the air conditioning unit to see which refrigerant you need. A return of opened line packages is NOT possible.  Technical data  Suitable for devices with cooling function (without heating), refrigerant R32Length 4 m

Learn more More Fewer