This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.425

Learn more More Fewer

The large area humidifier B400 is a powerful cold evaporator with air washing function. It is comparatively quiet and compactly built, ensuring good humidity in dry living rooms, overheated offices, as well as storage rooms and workshops up to 250 m².Functional principleA humidification mat is pulled through the water bath by a wheel and absorbs moisture. This creates a moisture buildup in the device, which is released into the room air by a two-stage adjustable fan. This method is very effective in humidification performance, while particles in the air are captured on the humidification mat and deposited in the water bath. The air humidifier thus also cleans the air of airborne particles such as dust and pollen.serviceThe operation is incredibly simple. The humidifier has only two rotary switches:Operating switch: three-stage - OFF, fan level 1 or fan level 2Hygrostat switch: for stepless regulation of the desired target humidityTwo lights also indicate when the device is in operation and when the water tank is empty.The humidifier has a metal housing (white powder-coated), stands on 4 wheels, and is easy to move.VentilationThe ventilation is two-stage, the maximum air output is 500 m³, the operating noise is good on level 2, and only minimally perceptible on level 1. The three ventilation grilles at the air outlet can be easily adjusted either forward or backward.Consumables and MaintenanceThe water bath (pull-out drawer) serves to provide the necessary moisture on one hand, but on the other hand, it also collects the dirt that is removed from the air. Therefore, it should be completely emptied and cleaned once a week. The humidification wheel is clicked into the holder from above and can be easily removed for cleaning; the degree of contamination and thus the necessity for cleaning is visible from above.As with all evaporative coolers, it is also advisable to disinfect the water in the B400 to prevent germs and bacteria. For this purpose, the silver cubes (Ionic Silver Sticks) are suitable, which are available as consumables from us. The silver cubes should be replaced once per season; otherwise, no consumables are required for this device.scope of delivery• ready-to-use device  Technical data  Tension 230V/50Hz consumption max. fan speed 1 fan speed 2 Standby 53 Watt 31 Watt 45 Watt 0 operating noise (at a distance of 2.5m) Level 1: 44 dB(A) Level 2: 49 dB(A) circulating air level 2 500 m³/h humidification max. 60 liters / 24 h Room size max. 200 m² steering mechanically Weight 19 kg Mass (HxWxD) 74 x 63 x 34 cm guarantee  2 years

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.480

Learn more More Fewer

In vacuum insulation layer drying, the use of a class H13 particulate filter is highly recommended to protect against mineral fiber dust, mold spores, and allergens in the air. This two-part Multiqube filter consists of a robust, maintenance-friendly plastic housing and the filter element, which must be replaced after appropriate use. It has been specifically designed for use with Trotec water separators and compressors and is characterized by optimal filter performance as well as a high separation efficiency. The filter class H13 according to DIN EN 1822-1 corresponds to a separation efficiency of nominal > 99.97 % at 0.3 micrometer particle size. With 3 m² of filter area and 315 m³/h nominal air flow rate, the filter elements are optimally matched to the technical specifications of the vacuum turbines of Trotec compressors and provide performance reserves for combined use with up to two VE4S MultiQube or one VX5.  Optional filter class H14 "For an even higher purity rate, a filter of class H14 is optionally available (Item No. 7.160.000.223) with a separation efficiency of > 99.995 % at 0.2 micrometer particle size."  Hepacontrol Contaminated filters not only pose a contamination risk to the surrounding air, but they also have longer drying times and a risk of overheating.the compressor turbine as a result. Here, it offers even more safety compared to passive systems thanks to its innovative "Hepacontrol" status display. Active contamination protection: If the filter performance is too low due to a used filter element, the warning light automatically turns on, clearly signaling the need for a replacement of the filter element. Hepacontrol does not require an additional power connection, as the supply of the bright warning LED is provided by an integrated and particularly long-lasting high-performance battery.  additional No power connection required. The filter is integrated into the airflow of the rest of the drying system.  scope of delivery complete with housing and a filter element  Technical data filter class H13 according to ISO 14644-1 air flow max. 315 m³/h Number of hose fittings 4 x 38 mm (Rubber adapter available in 50 mm optional) Dimensions W x H x D 435 x 255 x 435 mm Weight 6.3 kg Trotec article no. 6.100.000.043 guarantee 2 years

Learn more More Fewer

Der Dunkelheizstrahler IRD 3200 ist eine leistungsstarke Lösung für punktuelle Wärme in geschützten Aussenbereichen, wie Terrassen, Balkonen oder in der Aussengastronomie. Er ist zur Wand- und Deckenmontage geeignet. Aufgrund der kräftigen Heizleistung von 3200 Watt ist eine Sicherung mit min. 13 Ampère erforderlich (T23-Stecker). Moderne Technologie Unsichtbare Wärmequelle (Dunkelstrahler): Im Gegensatz zu konventionellen Infrarotstrahlern arbeitet der IRD 3200 ohne sichtbare, hellleuchtende Heizröhre. Die Wärme wird durch eine verdeckte, in Aluminium eingebettete Edelstahl-Heizspirale erzeugt, was ein stimmiges Lichtdesign in anspruchsvollen Umgebungen ermöglicht. Wichtig: die Aufheizzeit ist etwas träger, als bei konventionellen Heizstrahlern und kann ein paar Minuten dauern bis zum Erreichen der vollen Heizleistung. Wärmespektrum: Die Abgabe der Strahlungsenergie erfolgt vorwiegend im mittel- und langwelligen Infrarotspektrum (IR-B und IR-C). Wärmeeffekt: Erzeugt eine gleichmässige und zielgerichtete Wärmeverteilung, ohne die Umgebungsluft aufzuheizen. Die Wärme ist sauber, kondensfrei, geruchs- und lautlos. Allergikerfreundlich: Durch die Vermeidung von Staubaufwirbelung ist das Gerät für Allergiker geeignet. Eigenschaften Merkmal Details Heizleistung 3200 Watt Heizstufen 3, wählbar per IR-Fernbedienung Schutzart IP55 (Staub-, Spritz- und Strahlwassergeschützt) Gehäuse Aluminium-Design-Gehäuse Bedienung Infrarot-Fernbedienung Timer-Funktion 24-Stunden-Timer Display LED-Anzeige Kontrolle Betriebs-Kontrollleuchte Montage Zur Wand- und Deckenmontage geeignet (Halterung im Lieferumfang enthalten) Ausrichtung Verstellbarer Neigungswinkel (um 45°), für grosses Wirkungsfeld Wartung Wartungsarm (kein Röhrenwechsel erforderlich) Einsatzbereiche Windgeschützte Aussenbereiche mit architektonischem Anspruch Gehobene Gastronomie-Bereiche Gepflegtes privates Umfeld (Terrassen, Balkone) Technische Daten Trotec Artikelnr. 1410003340 Wirkungsfläche max. 21 m² Gehäuseausführung Aluminium Abmessungen und Gewicht Produkt (ohne Verpackung) Länge 1815 mm Tiefe 55 mm Höhe 200 mm Gewicht 13.5 kg Leistung und Energie Funktionsprinzip elektrisch Infrarot Heizleistung 3200 W (3.2 kW max.) Heizelement Edelstahl-Heizspirale Anzahl Heizstufen 3 Elektrische Daten Netzanschluss und -frequenz 220 - 240 V, 50/60 Hz Leistungsaufnahme 3.2 kW Nennstromaufnahme 13.9 A empfohlene Absicherung 16 A Kabellänge 1.8 m Anschlussstecker EU-Stecker Typ F plus Fixadapter für die Schweiz T23 IP-Schutzart (IP55) Schutz gegen Berührung vollständiger Schutz gegen Berührung Schutz gegen Fremdkörper Geschützt gegen Staub in schädigender Menge Schutz gegen Wasser Schutz gegen Wasserstrahl, aus beliebigem Winkel auftreffend Ausstattung und Funktionen IR-Fernbedienung Ja (im Lieferumfang enthalten) Timer-Funktion Ja Garantie 2 Jahre Funktion/Stufe Heizleistung [kW] Stufe 1 1.07 Stufe 2 2.14 Stufe 3 / Max. 3.2

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.430

Learn more More Fewer

"Striking in technical features, modest in price: The dehumidifier with built-in condensate pump."     Comfort function: Temperature-dependent air dehumidification   "For an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended for use in rooms with temperature fluctuations throughout the day or year. If the room temperature changes, the dehumidifier automatically adjusts its dehumidification performance."     Effective and simple   The device also naturally features a hygrostat-controlled dehumidification automation. A fixed air humidity value is selected, which should not be exceeded. The adjustable range is between 35 and 85% relative humidity, in 5% increments. If the value is exceeded, the dehumidifier automatically activates and switches off by itself in an energy-saving manner as soon as the desired target value is reached.     Gentle laundry drying with dehumidifiers   "In addition to dehumidifying the room air, the dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumbler. The laundry drying function is comparable to traditional air drying outdoors."   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, with significantly less energy consumption. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns. In contrast to pure air drying, the laundry becomes softer and more pleasant to wear against the skin because the garments move in the gentle breeze of the dryer during the drying process.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Convincing Features   The timer function, a fill level warning light for a full water tank, the overflow protection with automatic shut-off, and a laundry drying mode complete the comfort features of this TTK dehumidifier. In addition, the integrated, washable air filter allows for additional air purification by extracting dust or pet hair. Thanks to its wheels and practical carrying handles, the device is also well-prepared for flexible relocation. The operation is easy and low-maintenance due to its comfortable features.     Bucket, direct hose connection and integrated condensate pump   The water that is extracted from the air is collected in a standard 6-liter bucket. A float switch automatically stops the operation when the bucket is full. Alternatively, the water can also be directed through a hose to a lower drainage point. If no floor drain is available, the water can be pumped up to 4 meters high using the built-in pump in the device, for example into a sink, out of a basement window, or even one floor up. Direct drainage is particularly convenient in unattended operation, as it eliminates the need to empty the bucket (hobby rooms, holiday apartments, drying of water damage, etc.).    The integrated pump is not suitable for continuous operation.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Advantages at a Glance • Hygrostat-controlled dehumidification automation with selectable target value between 35 and 85 % r.H. in 5 % steps• Comfort operation for temperature-dependent automatic control of humidity• Overflow protection with automatic shutdown when the bucket is full • Level warning light when water tank is full• Connection for external condensate drainage with integrated condensate pump• Pump-out function for faster condensate drainage• Optional fully automatic or continuous operation• Easily readable, illuminated display• Display of relative humidity• Laundry drying function• Timer Function• 2 fan speeds • Cable winding     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 47 liters / day air volume 375 m³/ h Maximum room size 120 m² (100 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C moisture range 35 - 100 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 5.4 A Power consumption max. 1060W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss fixed adapter refrigerant R290 (145g) GWP3 water bucket 6 Liter Pump integrated, lifting height up to 4 m operating noise 50 dB(A) at 1 m distance47 dB(A) at a distance of 2.5 m Dimensions L x W x H 282 x 392 x 616 mm Weight 19.5 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A good, affordable racing horse for builders and water damage restorers. This dehumidifier has consistently omitted everything that is unnecessary for continuous operation. It has neither a display nor a hygrostat (a plug-in hygrostat can be optionally ordered if needed). This makes it very easy to operate, safe from tampering, and exceptionally low in price. On the other hand, it has everything needed for effective and quick drying: powerful dehumidification performance, hot gas defrosting, hour counter, as well as large wheels and a handle for easy mobility on construction and damage sites.     Easy handling   "The commissioning is child's play. Plug in - flip the main switch - done!"   The operation continues until either the bucket is full or the dryer is uninstalled again. As long as the device is connected to the power supply, it runs reliably and there are no settings that can be accidentally changed or manipulated. This also applies in the event of a power outage: when the power returns, the dehumidifier resumes its task with unchanged settings.   Thanks to the professional hot gas automatic control, operation in cooler environments is also possible without any issues, although the dehumidifying power, as with all condensation dryers, decreases at low temperatures. The installed finned evaporator (cooling element) has an exceptionally high efficiency in tempered environments and can dry the air to just below 40% relative humidity. Furthermore, the dryer is equipped with a rolling piston compressor. This means that it can be transported and stored in any position.     Optional Hygrostat   "Should a hygrometer for regulating the target humidity be required at any point, the dryer is prepared so that the Trotec Hygrostat HG110 can be connected directly via a jack plug. Please note the accessories."     Bucket and direct hose connection   The water extracted from the air is collected in a bucket with a capacity of 5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid downwards, as no pump is integrated in the dryer.     Suitable for unattended continuous operation   This "TTK" is suitable for longer, unattended drying operations. The exact operating time can be precisely determined with the standard integrated hour meter. This is particularly useful for commercial applications. Thanks to the meter, it can also be tracked whether the device was always in operation or if it was accidentally or intentionally turned off.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Affordable price with strong performance in the commercial sector• Thanks to hot gas defrosting, it can also be used in cooler environments.• Robust steel construction with large wheels and guide bracket• Suitable for continuous operation• Thanks to the roll piston compressor, it is transportable and storable in any position.• External hygrometer connection     Technical data  dehumidification performance at 30 °C / 80 % r.H. 50 liters / day air volume 350 m³/ h Maximum room size 125 m² (310 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 35 - 90 % r.F. 40 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 3.7 A Power consumption max. 820W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5 Liter operating noise 56 dB(A) at 1 m distance 53 dB(A) at a distance of 2.5 m Dimensions L x W x H 495 x 455 x 900 mm Weight 31 kg defrosting automatic Heissgas dehumidification automation Continuous operation, an insertable mechanical hygrometer is optionally available. Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and operating hour meter and Continuous operation possible and Display no memory function yes (automatically saves set values) hose connection yes, not included in the delivery (suitable inner diameter: 12 mm) guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

Ozone in the ambient air poses a significant damage potential even at low concentrations. Therefore, compliance with safe ozone limit values is essential for the protection of human and animal health. This measuring device is the ideal instrument for the rapid and precise control or long-term monitoring of ozone concentrations in the ambient air. Ozone, a nearly colorless gas, is produced naturally or generated technically. It consists of an unstable compound of three oxygen atoms (O3), which relatively quickly decomposes back into oxygen (O2). In the O3 compound, it acts as a strong oxidizing and disinfecting agent. It kills germs, bacteria, viruses, and odors up to 3000 times more effectively than a chlorine treatment. Therefore, it is used in various areas for the disinfection of air and surfaces. However, before treated spaces are made accessible again for people and animals, it is crucial that the ozone level is within the permissible range. For this purpose, this measuring device is essential. The device is characterized by an extremely low cross-sensitivity to other gases or VOCs and delivers fast, highly precise measurement results even at minimal ozone concentrations. Numerous integrated functions, such as the ozone zero adjustment, the reference value measurement for short-term and time-weighted averages, as well as the switchable value display from ppm to µg/m³, make this responsive measuring device an indispensable tool for the accurate determination of ozone loads. Furthermore, it serves as an environmental measuring device that captures air temperature and humidity, as well as calculates dew point and wet bulb temperature. The dual display allows for the simultaneous display of two measurement values. "For long-term measurements, the device can be mounted on a tripod. It features a mini USB port and a 9V barrel jack, allowing for both battery operation and permanent mains operation. For mobile applications, a power bank can be connected to the mini USB port if needed."Advantages at a Glance • Fast and precise determination of even very low ozone concentrations• Ozone measurement display in ppm or µg/m³• Quick response time• Low cross-sensitivity to VOCs• Ozone null balance function• Ozone reference value measurement (STEL/TWA)• Atmospheric pressure offset for high-precision normal cubic meter measurements• Measurement of air temperature and humidity• Calculation of dew point and wet bulb temperature• Offset setting for air temperature and humidity• Data hold, min, max, and alarm function• Display lighting• ¼-inch thread for tripod mounting• Both battery and mains operation possible for continuous measurements.• Energy-saving automatic shut-off• Including calibration certificate     Diverse applications   • Workplace measurements in industry and commerce• Environmental analyses• Review of production environments• Limit value controls after the use of ozone generators for odor neutralization or disinfection, for example in the hospitality industry, drinking water treatment, as well as in fire and water damage restoration.     Scope of delivery   • Measuring device• Batteries• User manual• Calibration certificate• Carrying bag     Technical data Ozone (O3) measurement ppm min. 0, max. 1 ppm deviation Ozon (O3) µg/m³ min. 0, max. 1.996 (at 20°C and 1.013 hPa) deviation Temperature 0 to +50°C resolution 0.1 °C deviation ± 0.6 °C moisture0 to 99.9% RH resolution 0.1 % r.F. Deviation 0 % - 10 %Deviation 10.1 % - 70 %Deviation 70.1 % - 99.9 % 5%3%5% Battery (internal) 4 x AAA 1.5V (included in the package) Weight 185 g Masse (L x B x H) 290 x 110 x 80 Trotec article no. 3.510.006.110 Guarantee 2 years

Learn more More Fewer

This high-quality protective cover has been specifically designed for the insulation layer dryer Qube+. It can be easily slipped over the device when needed and securely closed with zippers to ensure an optimal fit. Integrated openings at the front allow for smooth connection of hoses, while side ventilation holes ensure adequate air circulation.   Advantages at a Glance • Noise reduction of up to 5 dB(A) and additional modulation of high frequencies in low-frequency ranges perceived as quieter• Easy to clean and waterproof material• Optimal for continuous operation in residential environments• Quickly installable and accessible through double zipper system• Supply and exhaust openings ensure optimal engine cooling free from heat buildup.• Also for the use of the Qube+ with the attached drying control unit DA 4 Qube   SKU: 6100000070

Learn more More Fewer

Trotec PAC 3910 X – Starkes Klimagerät zur Kühlung von grösseren Räumen Ein vielseitiges Klimagerät, das Kühl-, Entfeuchtungs- und Ventilationsfunktionen in einem kompakten und mobil einsetzbaren System vereint. Mit einer Kühlleistung von 4.1 kW eignet es sich hervorragend für mittlere bis grössere Räume und schafft selbst an heißen Sommertagen ein spürbar angenehmes Raumklima. Funktionen, die überzeugen 3-in-1-Klimatisierung: Kühlung, Luftentfeuchtung und Ventilation – flexibel wählbar App-Steuerung via Wi-Fi für einfache Bedienung per Smartphone Follow-Me-Funktion: Die Temperatur wird dort gemessen, wo Sie sich befinden – für punktgenaue Klimatisierung Automatikmodus & Timer: Effiziente Steuerung ohne manuelles Eingreifen Nachtmodus: Reduzierte Lautstärke für störfreien Schlaf Schwenkfunktion (Swing) für gleichmässige Luftverteilung im Raum LED-Display & IR-Fernbedienung für komfortable Bedienung aus der Ferne Technische Merkmale im Überblick Artikelnummer 1210002133 Kühlleistung max. 4,1 kW / 14.000 Btu/h Raumgröße empfohlen bis 52 m² / 130 m³ Luftumwälzung max. 425 m³/h Entfeuchtungskapazität bis zu 3.75 l/h Betriebstemperatur 17–35 °C Geräuschpegel 52.3–53.6 dB(A) in 1 m Abstand Gebläsestufen 3 Energieeffizienz Klasse A Kältemittel R290 (230 g, umweltfreundlich) Stromanschluss 220–240 V / 50 Hz Leistungsaufnahme max. 1.6 kW Stecker EU-Stecker mit Schweizer Fixadapter Kabellänge 2.1 m Garantie 2 Jahre Design & Handhabung Kompakte Masse: 467 × 397 × 765 mm (L × B × H) Gewicht: 34 kg Mobil einsetzbar dank Transportrollen und Tragegriff Abluftschlauch: 1.5 m Länge – leicht über Fenster oder Tür zu führen Aufstellfläche: ab 12 m², mit mindestens 30 cm Abstand zur Wand Im Lieferumfang enthalten PAC 3910 X Klimagerät Abluftschlauch & Schlauchadapter Adapter zur Wandmontage Kondensatschlauch Luftfilter IR-Fernbedienung

Learn more More Fewer

Semi-professional dehumidifier for basements, construction sites, and laundry drying   This comfort dehumidifier protects and preserves what is dear and valuable to you. It is suitable for both robust dehumidification tasks in basements and laundry rooms, as well as for professional use in drying water damage or for keeping construction sites dry. Thanks to hot gas defrosting, it is also recommended for optimal drying results at low temperatures.     The all-rounder: Protects against mold, corrosion, and construction damage Excess moisture in the indoor air (> 60 percent) provides an ideal environment for pathogens. Mold also spreads in living spaces starting from this value, increasing the risk of respiratory diseases. Classic cars in the garage, artworks on the walls, and archived documents and books also suffer from excessive humidity. The causes of harmful humidity are diverse: deficiencies in building sealing, insufficient ventilation, as well as storms, flooding, or leaks in water-carrying pipes. The 122E keeps it dry.     Compact design – outstanding dehumidification performance Whether as a room climate improver in private settings or as a dehumidifier in commercial use – the cuboid stainless steel dehumidifier impresses with its comfortable features (e.g. 24h timer and auto-restart function as well as control panel lock function), an 8-liter condensate tank, and a strong dehumidification performance of 38 l/24 h at an air volume of 240 m³/h – sufficient for room sizes up to 100 m² or 250 m³. Thanks to the auto-restart function (memory function), the device automatically starts again in the pre-selected settings after a brief power interruption. For maximum user comfort, the control panel is equipped with easy-care membrane buttons and a digital display of room temperature and humidity. The target humidity can be set in 5 percent increments. Standard features also include a fill level warning light for a full water tank, overflow protection with automatic shut-off, and a reusable air filter that is easy to clean.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity."In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."    Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.     A dehumidifier for all occasions • Optimal suited for a healthy indoor climate in living areas• Moisture protection in archives, libraries, and art exhibitions• Corrosion and mold protection in (classic car) garages, basements, and storage rooms• Construction site drying and drying of damp masonry after water damage     Connection for external condensate drainage "For applications where regular emptying of the 8-liter condensate container is either not possible or undesirable, such as during unattended continuous drying operations in the basement, garage, holiday home, or on boats, the dryer features a built-in hose connection for direct drainage of the condensate into a drain. A short piece of suitable hose is already included in the delivery."     Hot gas defrosting automatic for faster drying results In low temperature ranges (below 12 °C), the integrated hot gas defrosting automatic system ensures consistently reliable air dehumidification – without long defrosting phases. Unlike the time-consuming recirculation defrosting of normal condensate dryers, the defrosting occurs through hot gas injection into the evaporator. This significantly shortens the duration of defrosting and achieves the drying goal more quickly.     SuperDry function for accelerated textile drying Practically for the quick dehumidification of wet laundry, clothing, or carpets is the special SuperDry function. This allows even large textiles to dry in no time, which do not fit in the tumble dryer.    Advantages at a Glance • Quality hot gas defrost automatic system• SuperDry function for accelerated textile drying• Automatic hygrostat-controlled dehumidification operation with real value humidity preset• Activated carbon filter against unpleasant odors• 24-hour timer• Auto-restart function (memory function) • suitable for construction drying • suitable for drying damp basements• suitable for laundry drying• Permanent mode• Easy-care material mix with a distinctive look• Digital display of current humidity and temperature values• Locking function of the control panel (child safety)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 38 liters / day air volume 240 m³/ h Maximum room size 100 m² (100 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 35°C moisture range 30 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.9 A Power consumption max. 750W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (96g) GWP3 water bucket 8 Liter operating noise 52 dB(A) at 1 m distance49 dB(A) at a distance of 2.5 m Dimensions L x W x H 453 x 310 x 635 mm Weight 27.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

A high-quality work and assembly tent with a thoughtful design. Ideal for use on construction sites and in roadworks in the trade. "Even with just one person, the tent can be set up effortlessly in seconds and can be easily carried to other locations thanks to its lightweight. The possible extensions and a whole range of accessories also allow for tasks from electrical installations to welding work. Furthermore, the lightfastness of the polyester fabric used and the enormous flexibility provided by lightweight and robust materials are impressive." The assembly tent not only provides protection from rain but also from cold. Clever rain protection strips on all zippers prevent water from entering. And even in darkness, the tent is well visible thanks to reflective strips.  Advantages at a Glance • 3 zippers in the front, so that the entrance can be rolled up completely or partially.• 2 closable vents with grille and rain protection cloth• Transport bag included in delivery• Dimensions L x W x H: 120 x 120 x 200 cm• Weight: approx. 10 kg "Available upon request also individually with your company logo and in your desired colors." Trotec Article No. 4.110.003.046

Learn more More Fewer

Perfect all-rounder for construction, trade, and water damage restoration   This Trotec dehumidifier impresses with powerful dehumidification performance combined with a strong fan that blows the dried air back into the room at high speed. This means that the room air is optimally circulated, and the drying process, especially in large, highly humid, or shelf-adjusted archive and storage rooms, is significantly faster.   The vehicle construction with guiding bow, carrying troughs, and large wheels facilitates transport even in difficult terrain sections or on stair steps.   For quick commissioning, the dryer features an easy-to-use control panel with a digital display of all functions. For hygrostat-controlled automatic operation, the target value can be pre-selected in percentage steps, which is then displayed together with the current actual value. The selectable target humidity range is from 20 - 90 %, although in practice, values below 35 % are difficult to achieve. This device operates at its full capacity in at least slightly heated rooms, with an ideal temperature of 12 °C or higher.   "With the timer, you can configure the on or off times, and thanks to the integrated memory function, the settings are retained even after a power interruption. This means that operation with a timer is also possible."     Bucket and direct hose connection The water extracted from the air is collected in a bucket with a capacity of 5.5 liters. A magnetic float automatically interrupts operation when full, and a warning light visually indicates that the bucket should be emptied. A hose can be connected to the bucket if needed, in case the water can be drained directly. The hose must be laid with a downward slope, as there is no pump integrated in the dryer (optionally, a standalone condensate pump is available from us if the water can or should be transported upwards or over a distance).     With optional air hose connection for cavity drying   "Whether in suspended ceilings, in bathtub cavities, in cassette walls, or cable ducts – when moisture has penetrated poorly accessible cavities, quick action should be taken to prevent mold formation. This dehumidifier is also suitable for this purpose, as it is equipped with a specially powerful fan with 3.2 MPa air pressure. An air hose with a suitable adapter can be optionally attached to it, allowing the dry air to be directed precisely to the damp areas."   Note: If there is heavy dirt, dust, or already mold in the cavity, the room should ideally not be occupied or used during this drying process, as otherwise, dust particles and mold spores can spread everywhere. In this case, the additional use of an air purifier is recommended.      Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • Particularly economical solution for typical dehumidification applications in the commercial sector• High dehumidification performance even at low temperatures• Air hose connection for localized dry air application or cavity drying• Robust steel construction in vehicle design• Thanks to the roll piston compressor, it is transportable and storable in any position.• Timer Function• Memory function (auto-restart function)• Permanent mode for continuous operation• Maintenance-friendly magnetic closure door   Technical data   dehumidification performance at 30 °C / 80 % r.H. 51 liters / day air volume 450 m³/ h Maximum room size 130 m² (330 m³) Minimum room size 12 m² (30 m³) temperature range 5 - 30°C Moisture range technical Moisture Range Practice 20 - 90 % r.F. 35 - 90 % r.H. (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.7 A Power consumption max. 650W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (230g) GWP3 water bucket 5.5 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 525 x 490 x 900 mm Weight 40 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, no hose included in the delivery guarantee 2 years

Learn more More Fewer

Der Hochdruck-Axialventilator für extreme Distanzen High Pressure (HP): Der TTV 4500 HP ist die spezialisierte Hochleistungsvariante des bewährten TTV 4500 und bietet alle dessen Vorteile, ergänzt durch einen besonders hohen Druck von beeindruckenden 160 Pa. Dank dieses hohen Drucks ist der Axialventilator TTV 4500 HP ideal dafür geeignet, auch weit entfernte Bereiche zuverlässig zu belüften oder zu entlüften – selbst über lange Schlauchdistanzen und mit mehreren hintereinander geschalteten Lufttransportschläuchen. Flexibler Einsatz durch beidseitigen Adapter Das Herzstück der Flexibilität ist der TTV 4500 Schlauchadapter, der beidseitig am Gerät montiert werden kann: Belüftung: Anschluss des Lufttransportschlauchs an der Ausblasseite. Absaugung: Anschluss des Lufttransportschlauchs an der Ansaugseite. Kombination: Durch die Verwendung von zwei Adaptern können Sie beispielsweise einen Ansaugschlauch mit einem Staubsack an der Ausblasseite kombinieren – die perfekte Lösung für die effektive Staubabsaugung über weite Strecken. Gesundheitsschutz: Effektive Reduktion von Feinstaub Gerade bei Sanierungs-, Materialverarbeitungs- und Entsorgungsarbeiten entsteht viel lungengängiger Feinstaub. Aktuelle Studien weisen darauf hin, dass die gesetzlichen Höchstwerte oft nicht ausreichen, um Mitarbeiter, insbesondere in der Bauindustrie, vollständig vor Gesundheitsrisiken wie Lungenkrebs zu schützen. Der TTV 4500 HP bietet in Kombination mit dem Staubsack eine praxiserprobte Lösung zur Reduktion der Staubbelastung: Die auswaschbaren Trotec-Staubsäcke haben einen extrem geringen Durchlassgrad von max. < 0.1 %. Sie erfüllen die Staubklasse M und entsprechen der Norm DIN EN 60335-2-69 für den Filtereinsatz in staubbeseitigenden Maschinen. Praxisvorteile im Überblick 160 Pa starker Axialventilator – nach hohen Industriestandards gefertigt. Extrem robust und langlebig für den professionellen Dauereinsatz auch unter härtesten Bedingungen. Spritzwassergeschützt (IP55). Platzsparend stapelbar für einfachen Transport und Lagerung. Optionaler Schlauchadapter erhältlich: Ermöglicht den vielseitigen Anschluss von Lufttransportschlauch oder Staubsack zur Belüftung oder Staubabsaugung. Technische Daten  Artikelnummer 1.510.000.012 Ventilatortyp Axial Gehäuseausführung Kunststoff Lüfterflügel-Material Kunststoff Luftstrom Ausblasend, Ansaugend Durchmesser Schlauchanschluss 450 mm Gebläsestufen 3 Max. Luftdruck 160 Pa Max. Fördermitteltemperatur 45 °C Luftaustrittsgeschwindigkeit 9 m/s (32,4 km/h) Wurfweite (im Freien) 25 m Wurfweite (in Innenräumen) 43 m Luftmengen (frei ausblasend) Stufe 1 2000 m³/h Stufe 2 3000 m³/h Stufe 3 / Max. 4500 m³/h Elektrische Werte Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme 330 W Nennstromaufnahme 1.4 A Empfohlene Absicherung/Vorsicherung 10 A Kabellänge 3 m Anschlussstecker CEE 7/7 mit Schweizer Fixadapter Schutz und Mobilität IP Schutzart IP55 Details IP55 Vollschutz gegen Berührung; Geschützt gegen Staub in schädigender Menge; Schutz gegen Wasserstrahl. Mobilität Trage-/Transportgriff(e) Stapelfähigkeit (max. Höhe) 3 Geräte Abmessungen und Gewicht Länge (ohne Verpackung) 358 mm Breite (ohne Verpackung) 515 mm Höhe (ohne Verpackung) 520 mm Gewicht (ohne Verpackung) 15.5 kg Länge (mit Verpackung) 360 mm Breite (mit Verpackung) 520 mm Höhe (mit Verpackung) 590 mm Gewicht (inkl. Verpackung) 17 kg Schallpegel (Abstand 3 m) 64 dB(A) Garantie 2 Jahre Enthaltener Lieferumfang Kombiverteiler, Staubsack 3 m, Staubsack 5 m, Schlauchadapter, Schlauch TF-L, Schläuche Normaltemperatur, Universal-Spanngurt

Learn more More Fewer

The robust and powerful all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely requires servicing, and is very affordable considering its power and quality."  Easy handling The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat, and continuous operation is also possible. With the used lamella evaporator, target humidities below 40% r.H. are difficult to achieve; however, this technology shows impressive dehumidification power in temperate and humid environments. Particularly useful in larger areas is the high air circulation volume of a substantial 1000 cubic meters per hour. With its stable trolley construction and large wheels, frequent relocation to different sites can be easily carried out.  Bucket, direct hose connection and optional pump kit The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards. "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     For continuous operation on construction sites   The possibility of connecting an external condensate drain – optionally with a condensate pump if needed – makes the construction dryer also ideally suited for longer unattended drying tasks, e.g. in construction drying.     Optional counters The delivery does not include an hour or consumption meter. You can order these from us if desired (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional)• Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % r.H. 55 liters / day air volume 1000 m³/ h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 6.1 A Power consumption max. 1400W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 Liter operating noise 54 dB(A) at 1 m distance 51 dB(A) at a distance of 2.5 m Dimensions L x W x H 530 x 500 x 965 mm (incl. guide bracket) Weight 39 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

AirgoClean One – Hochleistungs-Luftreiniger mit H14-HEPA-Filtersystem Der Premium-Luftreiniger der Marke Trotec für effektive Virenfilterung und dauerhafte Luftreinhaltung in anspruchsvollen Umgebungen. Er eignet sich ideal für Besprechungsräume, Wartezimmer, Arzt- und Veterinärpraxen, Kanzleien sowie hochwertige Privatambientes. Der in Deutschland entwickelte und gefertigte Hochleistungsluftreiniger erfüllt höchste Qualitätsstandards und ist mit effizienten Markenbauteilen neuester Technologie ausgestattet. Die hohe Wirksamkeit des H14-HEPA-Filtersystems ist wissenschaftlich bewiesen. Das Gerät besitzt ein manuelles Bedienerfeld und eine Fernbedienung. Weiter lässt es sich über Bluetooth auch von einem Mobil-Telefon oder Tablet mittels App steuern und überwachen. Kernmerkmale und Leistung Der AirgoClean One gewährleistet eine zuverlässige Luftreinigung durch mechanische Filtertechnik und erzielt eine Abscheideleistung von 99.995 % aller luftgetragenen Partikel bis zu einer Grösse von 0.1 Mikrometern. Eliminierte Schadstoffe und Partikel (Abscheidegrad ≥ 99.995%): Bakterien und Viren (z.B. SARS-CoV-2, Grippe) Feinstaub (einschliesslich Ultrafeinstaub PM1) Pollen (Blütenstäube) Flüchtige organische Verbindungen (VOC) Staubmilben und Hausstaub Schimmelpilzsporen Hautschuppen von Tieren Tiergerüche Filtersystem und Technologie Der AirgoClean One setzt ausschliesslich auf etablierte, mechanische Filtertechnik ohne alternative Verfahren wie UV-C, Ionisation, Ozon oder elektrostatische Filterung, um eine 99.995 % virenbefreite Reinluft zu garantieren. Filterstufe Typ Funktion 1 (Vorfilter) Synthetische Vorfiltermatte Fängt Grobpartikel (Staub, Haare) auf. 2 (F7-Vorfilter) F7-Filter (ISO ePM10 85 %) Hält effektiv Grob- und Feinstaub zurück. 3 (HEPA) H14-HEPA-Filter (nach EN 1822) Abscheidegrad ≥ 99.995% für Partikel von 0.1 - 0.3 µm (Viren, Bakterien, Allergene). 3 (Optional) Aktivkohle-Filter Neutralisiert Gerüche (Tabak, Haustiere, Küche) sowie Formaldehyd   Technische Daten Allgemeine Informationen Trotec-Artikelnummer 1580001100 Ventilatortyp radial Dimensionen und Gewicht Länge ohne Verpackung 435 mm Breite ohne Verpackung 400 mm Höhe ohne Verpackung 835 mm Gewicht ohne Verpackung 17 kg Gewicht inklusive Verpackung 24 kg Produkt- und Raumangaben Empfohlene Raumgrösse (Fläche) 78 m² Empfohlene Raumgrösse (Volumen) 195 m³ Gebläsestufen 6 Energie und Anschlüsse Netzanschluss und -frequenz 230 V, 50/60 Hz Leistungsaufnahme 170 W Kabellänge 1.4 m Anschlussstecker Bezeichnung CEE 7/7 Anzahl Batterien pro Gerät 1 Filtereigenschaften Filtereffizienz 99.995% Schwebstofffilter HEPA-H14 (EN 1822) IP-Schutzart IP Schutzart IP44 Schutz gegen Berührung Geschützt gegen Zugang mit einem Draht (Ø ≥ 1,0 mm) Schutz gegen Wasser Schutz gegen allseitig auffallendes Wasser / Spritzwasser Schutz gegen Fremdkörper Geschützt gegen feste Fremdkörper Ø ≥ 1 mm Luftmengen (Typwerte) Stufe/Anwendung Luftmenge [m³/h] 1 35 2 115 3 230 4 355 5 475 6 600 Max. 600 Schallpegel Stufe/Anwendung (Abstand 1 m) Schallpegel dB(A) 1 19 2 34 3 42 4 48 5 52 6 57 Stufe/Anwendung (Abstand 3 m) Schallpegel dB(A) 1 11 2 25 3 33 4 40 5 44 6 49 Lieferumfang Batterie(n) HEPA H14 Filter Vorfilter F7 Vorfiltermatte Schalldämpfer Funktionen und Ausstattung Anzeige der Luftqualität (numerisch/Farbbalken) Historie Luftqualität 24h / 14 Tage Luftqualitätssensor (VOC) CO₂-Sensor Partikelsensor PM1 / PM2.5 Erkennung Anzeige der Temperatur / Luftfeuchtigkeit Automatikbetrieb (Hinweis: nicht im Virenfilter-Modus empfohlen) App-Steuerung / IR-Fernbedienung Digital- / Touch-Display Turbo-Modus Timer-Funktion / Memory-Funktion Nachtmodus Manipulationsschutz / Kinderschutz/Lock-button Schalldämpfer Filterwechsel-Anzeige Hauptfilter (optisch und akustisch) Vorfilter (optisch und akustisch) Filteraustauschanzeige (generell) Mobilität Tragegriff-Leiste Kunststoff-Transportrollen Garantie 2 Jahre   Bedienungsanleitungen Bedienungsanleitung Deutsch PDF User Manual English PDF -> Ersatzfilter und Zubehör -> Mehr Informationen über Nutzen und Anwendung von Luftreinigern

Learn more More Fewer

This powerful axial fan, combined with thoughtful accessories, offers a versatile solution for numerous applications. It is ideally suited for ventilation, air circulation, and dust extraction, for both cold and warm air. For transport over longer distances, various air transport hoses are available, while dust bags effectively capture dirt in enclosed spaces. Thanks to the variable accessory modules, you only need this one fan to perform a variety of tasks that you would have previously needed multiple devices for. This high-performance fan, like all models in the TTV series, has been specifically designed for use in the toughest conditions. Its robust construction and high reliability ensure a long service life, even in material-intensive continuous operation at varying locations. The powerful blower enables strong and large-volume air circulation, which leads to accelerated evaporation. The higher the flow velocity at the material surface, the faster the drying process occurs. By combining the dryer and blower, the drying time can be reduced by up to 50%, depending on the design. A versatile adapter for numerous applications: The hose adapter can be attached to the fan on both sides to optionally realize suction or ventilation. Additionally, by using two hose adapters, the combined use of air transport hose and dust bag for effective suction of dirt particles is possible.   Protection from dust during renovation work   During renovation work, material processing, and disposal, a lot of dust is inevitably generated. Therefore, protect yourself and your employees from hazardous fine dust while working. A proven alternative to reduce dust exposure is the extraction of dirt and dust particles. The washable Trotec dust bags have a permeability of max.     Advantages at a Glance   • Extremely robust for professional continuous use even under the harshest conditions• Spray water protected (IP55)• Space-saving stackable for transport and storage• Suitable hose adapter available: The optional attachment allows for the connection of air transport hose or dust bag, e.g. for the extraction of dirt particles.     Technical data   Air volume max. 5300 m³ / Std. (free blowing) Ventilator Axial Fan speeds 3 Air speed 11 m/s (= 39.6 km/h) Throwing distance outside 15 mwithin 50 m Air pressure 80 Pa (at highest level) Funding temperature max. 45 °C Mains connection 230 V, 50 Hz Nominal current consumption 1.1 A Power consumption 250 W Insurance 10 A Cable + plug 3m, EU plug with Swiss fixed adapter Protection class IP55 Operating noise 53 dB(A) at a distance of 3m hose connection Diameter 450 mm Dimensions H x W x D 520 x 515 x 358 mm Weight 14.5 kg Trotec article no. 1.510.000.010 Guarantee 2 years  

Learn more More Fewer

Die Windmaschine TTW 25000 S  Für alle Belüftungsaufgaben in Produktionsumgebungen, Landwirtschaft oder Lagerbereichen, wo hohe Luftwechselraten auch mit wenig Investitionsaufwand realisierbar sein sollen, ist die Windmaschine TTW 25000 S eine optimale Wahl. Sie ist bei Bedarf auch in der noch kräftigeren Ausführung "TTW 35000S" erhältlich. Hohe Luftleistung und robuste Bauweise Aufgrund der zweistufig regelbaren Luftleistung von bis zu 27'600 m³/h können mit diesem robusten Trommelventilator die erforderlichen Luftwechselraten auch in großen Räumen oder Hallen erreicht werden. Das galvanisierte Stahlgehäuse ist dank Fahrrahmen einfach transportierbar und trägt eine neigbare Ventilatortrommel zur variablen Ausrichtung der Windmaschine bis auf eine senkrechte Strömungsposition. Auf diese Weise lässt sich der Luftstrom gezielt auch an hohe Wand- oder Deckenbereiche lenken, was die Windmaschine TTW 25000 S auch zur flexibel einsetzbaren Lösung bei Effektbelüftungen für Bühne, Film- und Fotosets macht. Vorteile für die Praxis Budgetschonende Option für semiprofessionelle Belüftungsanwendungen Luftumwälzungskapazität bis 27'600 m³/h Steckerfertiges Gerät mit einfacher Handhabung Justierbarer Neigungswinkel der Strömungsrichtung von horizontaler bis senkrechter Position Flexibler Ortswechsel durch Fahrwagenkonstruktion Technische Daten Trotec Artikel-Nr. 1510004020 Dimensionen und Gewicht Tiefe ohne Verpackung 525 mm Tiefe mit Verpackung 395 mm Breite ohne Verpackung 1090 mm Breite mit Verpackung 900 mm Höhe ohne Verpackung 1140 mm Höhe mit Verpackung 1150 mm Gewicht ohne Verpackung 44 kg Gewicht inklusive Verpackung 49 kg Technische Spezifikationen Gebläsestufen 2 Max. Fördermitteltemperatur 40 °C Wurfweite (Innenräume) 8 m Luftmenge und -druck Luftmenge Stufe 1 21'000 m³/h Luftmenge Stufe 2 27'600 m³/h Max. Luftmenge (Typ) 27'600 m³/h (frei ausblasend) Max. Luftdruck 160 Pa Energie und Elektrik Nennstromaufnahme 2.8 A Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme gesamt 650 W Leistungsaufnahme Stufe 1 0.52 kW Leistungsaufnahme Stufe 2 0.65 kW Empfohlene Absicherung/Vorsicherung 16 A Kabellänge 2.3 m Anschlussstecker (Bezeichnung) CEE 7/7 mit Schweizer Fixadapter Akustische Daten Schallpegel Stufe 1 (Abstand 1m) 65 dB(A) Schallpegel Stufe 2 (Abstand 1m) 75 dB(A) Ausführung und Mobilität Lüfterflügel-Material Metall Ventilatortyp axial Luftstrom ausblasend Gehäuseausführung Metall Mobilität fahrbar (Stapler, gummibereifte Metallräder) Garantie 2 Jahre

Learn more More Fewer

Mit einer hohen Gebläseleistung von maximal 1785 m³/h gewährleistet der starke 18kW Heizlüfter "Trotec TEH 100" die schnelle Beheizung grosser Räume. Für einen sicheren Halt des angeschlossenen Warmluftschlauchs ist das Heizgerät mit einem wärmegedämmten Anschlussstutzen inklusive speziellem Schlauch-Stützring ausgestattet. Ein integriertes Ausblasgitter fördert zusätzlich einen gerichteten Warmluftstrom.Die robuste Konstruktion aus schutzlackiertem Stahlblech birgt ein speziell entwickeltes, strömungsoptimiertes Chassis. Dieses Design maximiert den System-Wirkungsgrad, indem es einen fokussierten Heissluftstrom ohne Verwirbelungsverluste ermöglicht, selbst über Schlauchstrecken von bis zu 15 m. Die robuste Stufenschaltung ermöglicht eine bedarfsgerechte Leistungsdosierung. Stufe eins aktiviert das Gebläse; die Stufen zwei bis vier erhöhen die Heizleistung parallel dazu dreistufig auf den Maximalwert. Das multistapelfähige Elektroheizgerät ist dank einer identischen Stapelnut flexibel und platzsparend mit dimensionsgleichen Modellen, wie dem TEH 70, stapelbar. Dies ermöglicht platzsparende Lagerung und flexible, individuelle Beheizungsaufbauten im Einsatz, wie zum Beispiel 180-Grad-Stapelinstallationen zur Luftverteilung in mehrere Richtungen. Die rundum drehbaren Transporträder erleichtern den Standortwechsel. Bei Stapelinstallationen bieten die Räder, arretiert per Rollstopp-Raste in der Stapelnut, standsicheren Halt.   Technische und Praktische Vorteile im Überblick Besonders strapazierfähige Stahlblechkonstruktion mit widerstandsfähiger Schutzlackierung. Strömungsoptimiertes Chassis für einen fokussierten, verwirbelungsfreien Warmluftstrom. Praktische Stapelnut für standsichere, platzsparende Lagerung und Transport. Doppelwandiges Gehäuse zur minimierten Aufheizung der Aussenummantelung. Extrem wartungsfreundliche Bauart. Robuste Trotec-Ergo-Griffmulden mit innenliegendem Grip-Clip für optimalen Tragekomfort. Praxisoptimiertes deutsches Industriedesign (geschütztes Geschmacksmuster). Multistapelfähigkeit mit dimensionsgleichen Modellen.  Technische Daten Trotec-Artikelnr. 1410000220 Produktinformationen Stapelhöhe max. 3 Lagerfähigkeit stapelbar Ventilatortyp axial   Abmessungen und Gewicht Länge ohne Verpackung 465 mm Länge mit Verpackung 435 mm Breite ohne Verpackung 425 mm Breite mit Verpackung 495 mm Höhe ohne Verpackung 555 mm Höhe mit Verpackung 600 mm Gewicht ohne Verpackung 27.5 kg Gewicht inklusive Verpackung 29.5 kg Durchmesser Schlauchanschluss 300 mm Schlauchlänge max. 15 m   Elektrische und Heizdaten Funktionsprinzip elektrisch Heizelement Edelstahl-Heizspirale Nennstromaufnahme 27.3 A Netzanschluss und -frequenz 400 V, 50 Hz Leistungsaufnahme / Max. Heizleistung 18 kW Empfohlene Absicherung 32 A Kabellänge 0.75 m Anschlussstecker Bezeichnung CEE 32 A | 5-polig Überhitzungsschutz 60 °C   Leistungswerte (Heizleistung / Luftmenge) Max. Luftmenge 1785 m³/h Gebläsestufen 1 Heizleistung Stufe 1 0 kW (Lüfterbetrieb) Heizleistung Stufe 2 9 kW / 7740 kcal Heizleistung Stufe 3 13.5 kW Heizleistung Stufe 4 / Max. 18 kW / 15'480 kcal Max. Temperaturerhöhung (bei 3 m Abstand) 38 °C   Ausstattung und Mobilität Gehäuseausführung Metall Mobilität Trage-/Transportgriff(e), gummibereifte Metallräder Funktionen Ein-/Ausschalter, Überhitzungsschutz Sonstige Daten Schallpegel (bei 1 m Abstand) 73 dB(A) Lieferumfang (Zubehör) Verlängerungskabel, externes Thermostat, Schläuche (Normaltemperatur 300 mm), Universal-Spanngurt

Learn more More Fewer

Die Windmaschine TTW 35000 S – Leistungsstark und Flexibel Für alle Belüftungsaufgaben in Produktionsumgebungen, Landwirtschaft oder Lagerbereichen, wo hohe Luftwechselraten auch mit wenig Investitionsaufwand realisierbar sein sollen, ist die Windmaschine TTW 35000 S eine optimale Wahl. Hohe Luftleistung und robuste Bauweise Aufgrund der zweistufig regelbaren Luftleistung von bis zu 32'400 m³/h können mit diesem robusten Trommelventilator die erforderlichen Luftwechselraten auch in großen Räumen oder Hallen erreicht werden. Das galvanisierte Stahlgehäuse ist dank Fahrrahmen einfach transportierbar und trägt eine neigbare Ventilatortrommel zur variablen Ausrichtung der Windmaschine bis auf eine senkrechte Strömungsposition. Auf diese Weise lässt sich der Luftstrom gezielt auch an hohe Wand- oder Deckenbereiche lenken, was die Windmaschine TTW 35000 S auch zur flexibel einsetzbaren Lösung bei Effektbelüftungen für Bühne, Film- und Fotosets macht. Vorteile für die Praxis Budgetschonende Option für semiprofessionelle Belüftungsanwendungen Luftumwälzungskapazität bis 32'400 m³/h Steckerfertiges Gerät mit einfacher Handhabung Justierbarer Neigungswinkel der Strömungsrichtung von horizontaler bis senkrechter Position Flexibler Ortswechsel durch Fahrwagenkonstruktion Technische Daten Trotec Artikel-Nr. 1510004025 Dimensionen und Gewicht Tiefe ohne Verpackung 1290 mm Tiefe mit Verpackung 1250 mm Breite ohne Verpackung 525 mm Breite mit Verpackung 395 mm Höhe ohne Verpackung 1210 mm Höhe mit Verpackung 1270 mm Gewicht ohne Verpackung 49 kg Gewicht inklusive Verpackung 55 kg Technische Spezifikationen Gebläsestufen 2 Max. Fördermitteltemperatur 40 °C Wurfweite (Innenräume) 10 m Luftmenge und -druck Luftmenge Stufe 1 24'600 m³/h Luftmenge Stufe 2 32'400 m³/h Max. Luftmenge (Typ) 32'400 m³/h (frei ausblasend) Max. Luftdruck 160 Pa Energie und Elektrik Nennstromaufnahme 3.2 A Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme gesamt 750 W Leistungsaufnahme Stufe 1 0.62 kW Leistungsaufnahme Stufe 2 0.75 kW Empfohlene Absicherung/Vorsicherung 16 A Kabellänge 2.3 m Anschlussstecker (Bezeichnung) CEE 7/7 mit Schweizer Fixadapter Akustische Daten Schallpegel Stufe 1 (Abstand 1m) 65 dB(A) Schallpegel Stufe 2 (Abstand 1m) 75 dB(A) Ausführung und Mobilität Lüfterflügel-Material Metall Ventilatortyp axial Luftstrom ausblasend Gehäuseausführung Metall Mobilität fahrbar (Stapler, gummibereifte Metallräder) Garantie 2 Jahre

Learn more More Fewer

Der Hochleistungslüfter für extreme Luftvolumen. Der TTV 7000 ist ein extrem robuster Hochleistungsventilator, konzipiert für den professionellen Dauerbetrieb unter härtesten Bedingungen. Er ist die optimale Lösung für alle Belüftungs- und Umwälzaufgaben, bei denen sehr hohe Luftvolumina bewegt werden müssen – ideal für Industrie, Bauwesen, Landwirtschaft oder grosse Lagerbereiche. Überlegene Leistung und Reichweite Mit einer dreistufig schaltbaren Luftleistung von bis zu 8500 m³/h garantiert der TTV 7000 hohe Luftwechselraten auch in grossvolumigen Umgebungen. Beeindruckende Wurfweite: In Innenbereichen erreicht er eine beeindruckende Reichweite von 65 Metern, was ihn zur idealen Wahl für die unterstützende Trockenluftumwälzung in Vollgutlagern oder bei grossflächigen Trocknungsarbeiten macht. Transport über Distanz: In Kombination mit dem passenden Schlauchadapter kann der TTV 7000 grosse Luftmengen souverän über sehr lange Distanzen befördern, auch mit mehreren angeschlossenen Lüfterschläuchen. Vielseitige Anwendung durch Adapter Der TTV 7000 ist durchdacht konstruiert, um maximale Flexibilität zu bieten: Beidseitiger Adapteranschluss: Der optionale TTV-Schlauchadapter kann beidseitig am Ventilator montiert werden, wahlweise zur Belüftung oder zur Absaugung. Staubabsaugung: Die Verwendung von zwei Schlauchadaptern ermöglicht den kombinierten Einsatz von Lufttransportschlauch und Staubsack zur effektiven Absaugung von Schmutzpartikeln. Gesundheitsschutz und Staubreduktion Gerade bei Sanierungsarbeiten und Materialverarbeitung entstehen oft gefährliche, lungengängige Feinstäube.  Die Absaugung von Schmutz- und Staubpartikeln ist eine praxiserprobte Alternative zur Reduktion der Staubbelastung: Die auswaschbaren Trotec-Staubsäcke haben einen Durchlassgrad von max. < 0.1 %. Sie erfüllen die Staubklasse M und die Norm DIN EN 60335-2-69, was einen sicheren Einsatz zur Staubreduktion gewährleistet.  Vorteile für die Praxis: Leistungsstarker Axialventilator – gefertigt nach hohen Industriestandards. Extrem robust für den professionellen Dauereinsatz. Spritzwassergeschützt (IP55) für raue Umgebungen. Platzsparend stapelbar für einfachen Transport und Lagerung. Hohe Standzeit und Zuverlässigkeit machen ihn zur perfekten Lösung für Maschinenvermieter. Optionaler Schlauchadapter erhältlich (ermöglicht Anschluss von Lufttransportschlauch oder Staubsack).   Technische Daten Allgemeine Produktinformationen Trotec-Artikelnr. 1510000030 Ventilatortyp Axial Luftstrom Ausblasend, Ansaugend Gehäuseausführung Kunststoff Lüfterflügel-Material Kunststoff Lagerfähigkeit Stapelfähig (max. Höhe 3) Mobilität Trage-/Transportgriff(e) Leistungsdaten Gebläsestufen 3 Luftmenge (Max., frei ausblasend) 8500 m³/h Luftdruck (Max.) 100 Pa Luftaustrittsgeschwindigkeit 11 m/s (39.6 km/h) Wurfweite (Innen) 65 m Wurfweite (Außen) 20 m Max. Fördermitteltemperatur 45 °C Luftmenge nach Stufe: Stufe 1 3800 m³/h Stufe 2 5600 m³/h Stufe 3 / Max. 8500 m³/h Elektrische Daten und Schutz Netzanschluss und -frequenz 230 V, 50 Hz Leistungsaufnahme 410 W Nennstromaufnahme 1.8 A Empfohlene Absicherung/Vorsicherung 10 A Kabellänge 3 m Anschlussstecker CEE 7/7 IP Schutzart IP55 Details IP55: Vollständiger Schutz gegen Berührung; Geschützt gegen Staub in schädigender Menge; Schutz gegen Wasserstrahl. Abmessungen, Gewicht und Lärm Produktgrösse (L x B x H) 665 x 520 x 500 mm Länge 365 mm Breite 620 mm Höhe 620 mm Gewicht netto/brutto 18.5 kg / 20 kg Durchmesser Schlauchanschluss 560 mm Schallpegel (in 3 m Abstand) 58 dB(A) Lieferumfang (Zubehör) Enthaltener Lieferumfang Staubsack 3 m, Staubsack 5 m, Schlauchadapter, Schläuche Normaltemperatur, Universal-Spanngurt Garantie 2 Jahre

Learn more More Fewer

The universal all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 170S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely needs servicing, and is very affordable considering its power and quality.".     Easy handling   "Using a mechanical hygrometer, the desired target humidity can be continuously adjusted between 32 - 100%, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 580 cubic meters per hour. With its stable cart construction and large wheels, frequent relocation to different usage sites can be easily carried out."     Bucket, direct hose connection and optional pump kit   The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards.   "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in areas above 40% humidity. Technically, the dryer can also be used in lower ranges down to about 5°C, even in unattended continuous operation.     Optional counters   The delivery includes no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)   Technical data  dehumidification performance at 30 °C / 80 % r.H. 40 liters / day air volume 580 m³/ h Maximum room size 100 m² (250 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.8 A Power consumption max. 600W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 540 x 490 x 963 mm (incl. guide bracket) Weight 32 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 12 mm Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer