Infrared Dark Radiator IRD 2400 – Designer Heat without Red Light Elegant warmth for upscale outdoor areas: Powerful, silent, and completely glare-free. The IRD 2400 is the perfect solution for patios, balconies, and outdoor catering where aesthetics are paramount. As a dark radiator, it generates pleasant infrared heat via a concealed stainless steel heating coil – entirely without the distracting red glow of conventional devices. The high-quality aluminum design seamlessly integrates into any architecture. No light effect: Ideal for harmonious lighting concepts without disturbing red light. Weatherproof (IP55): Dust, splash, and jet water protected for outdoor use. Allergy-friendly: Clean heat without dust turbulence or odors. Convenient control: Includes infrared remote control and 24h timer. Note on connection: Due to the power of 2400W, a fuse of at least 13A is required. The device comes with a 1.8 m connection cable and a T23 fixed adapter. Areas of Application Upscale outdoor catering Private patios and balconies Sheltered outdoor areas Architecturally sophisticated environments Comfort Functions 3 heating levels: 0.8 kW / 1.6 kW / 2.4 kW Flexibility: Wall or ceiling mounting (45° tiltable) Maintenance-free: No tube change required LED display: Shows current level Technical Specifications Max. heating power 2400 Watt (effective area up to 16 m²) Mains connection 220 - 240 V, 50/60 Hz (1.8 m cable) Housing & protection class Aluminum / IP55 Dimensions (L x W x H) 1460 x 200 x 55 mm Weight 11.5 kg Warranty 2 years

Learn more More Fewer

Dark Radiator IRD 3200 The powerhouse of the IRD series: Invisible heat for spacious outdoor areas up to 21 m². The IRD 3200 redefines premium heating. With an impressive 3200 watts, it is the ideal solution for large terraces or upscale outdoor catering. As a dark radiator, it completely dispenses with brightly lit heating tubes. Instead, it uses a concealed stainless steel heating coil to generate even, glare-free infrared heat that does not disturb the architectural lighting concept. Light-free design: Aesthetic warmth without disturbing red light – perfect for discerning requirements. High performance: Effective area of up to 21 m² with 3.2 kW heating power. Weatherproof (IP55): Optimal protection against dust, splash, and jet water outdoors. Smart control: 3 heating levels, 24-hour timer, and LED display via remote control. ⚠️ Important Installation Note (Switzerland):Due to its high power of 3.2 kW, this device requires protection of at least 16 amperes. The IRD 3200 comes with a 1.8 m connection cable and a T23 fixed adapter, which is designed for corresponding heavy-current sockets (rectangular pins) or construction power distributors. Features Allergy-friendly: Does not stir up dust, odorless and silent. Maintenance-free: No tube changes necessary thanks to stainless steel heating element. Mounting kit: Wall and ceiling bracket included. Flexible: Tilt angle adjustable by 45° for precise alignment. Heating Levels Level 1: 1.07 kW Level 2: 2.14 kW Level 3 (Max): 3.20 kW Technical Specifications Effective Area max. 21 m² Housing Aluminum design housing Dimensions (L x H x D) 1815 x 200 x 55 mm Weight 13.5 kg Electrical Data 230V / 13.9A (16A fuse required) Warranty 2 years

Learn more More Fewer

Infrared Heater IR 1200 S – instant heat at the touch of a button Compact wall-mounted heater with two heating levels, targeted infrared heat, and a splash-proof housing – ideal for covered terraces, balconies, and sheltered outdoor areas. The Trotec IR 1200 S provides quick and easy pleasant warmth when temperatures drop on the balcony, covered terrace, or in hospitality areas. Its infrared radiation warms people and objects directly without the need to heat the room air for a long time. Two quartz heating elements produce a heating output of 600 or 1200 watts. The desired level is conveniently selected via the integrated pull switch with cord. Thanks to the direct heat emission, the device is particularly suitable for areas where spot heating is required without a long preheating time. The radiant heater operates silently and without a fan. As a result, no dust is stirred up; at the same time, heat is generated without condensate or annoying odors. This is also advantageous for allergy sufferers. The robust metal housing is IP24 splash-proof and designed for use in covered outdoor areas that are protected from weather influences. Installation is exclusively on the wall. With the swiveling bracket, the heater can be tilted by up to 30°, allowing the heat radiation to be targeted precisely at the desired area. After mounting and connecting to a suitable socket, the device is easy to operate via the pull switch. Features: 2 heating levels: 600 W and 1200 W 2 quartz heating elements Direct infrared heat without preheating Uniform, targeted heat distribution Silent and odorless operation No dust turbulence Splash-proof IP24 Swiveling tilt angle up to 30° Integrated pull switch with cord Designed for wall mounting Direct infrared heat without preheating The IR 1200 S uses the natural principle of thermal radiation: instead of first heating the entire room air, it transfers heat directly to people and objects within its effective range. Thus, heat is available immediately after switching it on. The two power levels allow for adjustment to the respective heat requirement. At 600 W, the device is suitable for reduced heat output, while the full power of 1200 W is available for higher heat demands. Versatile for sheltered outdoor areas The radiant heater is designed for covered outdoor areas protected from weather influences. It is suitable, for example, for balconies, covered terraces, catering areas, storage rooms, construction site areas, containers, as well as trade fairs and events. The IP24 protection rating provides protection against splashing water but does not replace a protected mounting position. Wall mounting and targeted alignment The integrated wall bracket allows for fixed installation. Using the swiveling bracket, the tilt angle can be adjusted by up to 30° to direct the heat precisely to the desired area. Fastening material for wall mounting is included in the scope of delivery. When installing, the prescribed safety distances must be observed: at least 30 cm above, 50 cm to the sides and front, and 180 cm to the floor. A distance of at least 1 m must be maintained from the radiation side to flammable materials such as curtains, textiles, beds, or sofas. Simple operation via pull switch The heating level is selected by pulling the integrated cord. An indicator informs about the set operating status: level 0 means off, level 1 corresponds to 600 W, and level 2 corresponds to 1200 W. For operation, the device is connected to a properly fused socket. Important safety instructions The IR 1200 S must not be covered during operation. Keep textiles and other flammable objects away from the radiation surface and allow the device to cool down completely before transport or cleaning. It must not be exposed to direct water jets or submerged in water. Mounting on the ceiling is not permitted; the device is designed exclusively for wall mounting. Be sure to read the operating instructions before installation and operation. Advantages at a glance • Instant, direct heat through infrared radiation• Two heating levels for demand-oriented heat• Silent operation without a fan• No dust turbulence – beneficial for allergy sufferers• Splash-proof housing according to IP24• Swiveling bracket with up to 30° tilt• Simple operation via pull switch• Compact design for wall mounting• Suitable for covered terraces, balconies, and sheltered areas Technical data Model Trotec IR 1200 S Trotec article no. 1410003100 Heating capacity, level 1 600 W Heating capacity, level 2 1200 W Power consumption 1200 W Nominal current consumption 5.2 A Mains connection 220–240 V / 50–60 Hz Plug type Connection cable approx. 1.2 m with EU plug + fixed adapter for Switzerland Protection class IP24 Heating elements 2 quartz elements Effective area approx. 5–8 m², depending on ambient conditions Installation Wall mounting Tilt angle up to 30° Cable length 1.2 m Dimensions (L × W × H) 113 × 538 × 135 mm Weight 1.5 kg Minimum distance above 30 cm Minimum distance side + front 50 cm Minimum distance to floor 180 cm Warranty 2 years Scope of delivery • 1 × Infrared heater IR 1200 S• 4 × Wall plugs for the wall bracket• 4 × Mounting screws• 1 × Operating manual

Learn more More Fewer

High-performance IR 2050 wall-mounted infrared heater Rapid, targeted infrared heat with 2000 W, 3 heat settings and IP65 weatherproof protection – ideal for patios, balconies, workshops, and catering establishments. The Trotec IR 2050 infrared heater provides pleasant warmth wherever quick and targeted heating is required. Whether in uncovered outdoor areas, on patios and balconies, in the catering industry, workshops, or at trade fairs and events – the device generates uniform and targeted heat immediately after switching on, with no need for preheating. Short-wave infrared radiation acts directly on people and objects hit by the radiation. These surfaces store the absorbed heat and then release it as secondary radiation. This creates quickly noticeable warmth exactly where it is needed. With a maximum heat output of 2000 watts and three heat settings, the heating power can be flexibly adapted to individual needs. The high-quality Low Glare short-wave infrared tube combines intensive heat with significantly reduced light emission. With protection class IP65, the device is protected against water jets as well as the ingress of dust. Features: 3 heat settings: 750 / 1500 / 2000 W Infrared heat without preheating Even and targeted heat distribution High-quality Low Glare short-wave infrared tube Up to 6000 hours of illumination Up to 80% reduced light emission IP65 protection class Dust and rainproof from all directions Weather-resistant aluminum housing Infrared remote control Suitable for wall mounting Adjustable tilt angle No dust circulation Silent operation without a fan Instant and targeted infrared heat The IR 2050 uses the natural principle of infrared radiation. Instead of heating the air in the room, the radiation directly warms people and objects. The surfaces hit absorb the thermal energy, store it, and emit it back as secondary radiation. As a result, heat is available immediately after switching on. Preheating is not required. The radiant heat can be aimed specifically at the desired area, making it particularly suitable for spot heating at workbenches, seating areas, guest tables, or other work and leisure spaces. Flexible heat output with 3 heat settings With three heat settings, the heating output can be flexibly adapted to individual requirements. You can choose between 750 watts, 1500 watts, and 2000 watts. The desired heat setting can be conveniently selected via the included infrared remote control. Additionally, the heater can be operated directly on the device. Low Glare – comfortable warmth with reduced red light The high-quality Low Glare short-wave infrared tube provides intensive heat with significantly reduced light emission. The bright red light, which has previously been perceived as annoying, is reduced by up to 80% while the heat intensity remains fully preserved. The infrared tube reaches an average service life of up to 6000 hours and is thus designed for long-term use over several heating seasons. Weatherproof and suitable for outdoor use The robust aluminum housing and the IP65 protection class make the IR 2050 a resilient heater for outdoor use. The device is protected against water jets and is dust and rainproof from all directions. This makes it suitable for uncovered balconies and terraces as well as for professional applications in the catering industry, workshops, at trade fairs, and events. Silent and without dust circulation Since the IR 2050 operates without a fan, it generates heat completely silently. At the same time, the room air is not moved by a fan, meaning no dust is swirled around. This makes the heater suitable for allergy sufferers and areas where especially quiet operation is desired. Flexible alignment and simple operation The heater features a wall bracket with an adjustable tilt angle. The device can be angled up to 90° upwards and downwards, allowing the heat radiation to be directed exactly to the desired area. It is operated conveniently via the infrared remote control; alternatively, the IR 2050 can be operated directly on the device. The heater is intended exclusively for wall mounting and must be installed horizontally. For safe mounting, a minimum distance of 180 cm from the floor and at least 50 cm from adjacent walls and objects must be maintained. The heater must not be mounted on the ceiling. Efficient heat for spot applications The IR 2050 converts a large proportion of the electrical energy used directly into radiant heat. This makes it particularly suitable as an energy-efficient standby heating solution for areas where it is not necessary to heat the entire room air. The heat can be provided specifically where it is needed. Scope of delivery 1 x Heater1 x Remote control (without battery)1 x Operating manualMounting material: 1 x Mounting bracket, 2 x wing nut, 3 x screws, 2 x fastening screw, 3 x wall plugs, 1 x Allen key SW 5 Technical data Heating capacity 750 / 1500 / 2000 W Effective range ideal 8-10 m², max. 14 m² Mains connection 220 – 240 V ~ 50/60 Hz Nominal current consumption 8.7 A Power input 2 kW Plug type EU plug + fixed adapter for Switzerland Cable length 1.7 m Housing design Aluminum Protection class IP65 Dimensions (depth x width x height) 165 x 630 x 105 mm Minimum distance to walls and objectsside / top 50 cm Minimum distance to walls and objects in radiation direction 180 cm Remote control battery 1 x type CR 2025 / 3 V Weight 2 kg Trotec item no. 1410003211 Warranty 2 years

Learn more More Fewer

"This heater is suitable for quickly warming seating areas on terraces, in lounges, sports halls, or conservatories, so that the cozy gathering does not come to an abrupt end due to the cold. Thanks to its slim, attractive design, this heater is not only a source of warmth but also integrates decoratively into the room design."     Usable as wall and ceiling heating radiators   A supplied bracket allows for horizontal or vertical mounting of the heater on the wall or ceiling. The 45° swivel joint enables precise alignment of the heat rays to seating or table areas. Additionally, an easy-to-install cable system with quick screw connection is included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself can be done easily with minimal DIY skills.     Feel-good atmosphere at the push of a button   The pleasant infrared heat is immediately noticeable on the skin after switching on. To adjust the heat intensity, the heater has two heating levels of 1100 watts or 2200 watts, which can be set directly on the device or via the included remote control. When mounted on the ceiling, the height is also crucial for how much the space below is heated and how wide the heat rays spread. The lower the height, the warmer and smaller the illuminated area becomes. In lounges, a height of about 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment according to the natural principle of the sun. Unlike devices with heating wires, infrared rays do not warm the surrounding air, but exclusively the surfaces and people they encounter. The irradiated objects (such as furniture, walls, and ceilings) absorb the heat and store it, gradually releasing it back. The objects thus serve as an additional energy and heat storage – even when the device is turned off, which further increases efficiency. The heat radiation creates a pleasant feeling of warm sunlight on the skin in summer.   The high heating level (2200 watts) covers an area of approximately 9 m² in outdoor areas (in cool surroundings) or a maximum of 15 m² in slightly tempered, wind-protected environments.    "In particular, allergy sufferers and people with sensitive airways will find the benefits of infrared heaters to be soothing. The clean and condensation-free instant heat is generated, unlike electric heaters, without dust swirling, disturbing noises, and unpleasant odors."     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-red light, which many people perceive as warm and cozy, but sometimes also as glaring. To prevent the surroundings from being too brightly lit, this heater is equipped with two shortwave infrared tubes featuring light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwave heaters produce a larger proportion of infrared light from the invisible light spectrum. The infrared radiation is bundled through an innovative coating process of the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology, with a lifespan of approximately 6000 hours.   Full heat output at lower brightness: "As the perceivable light is significantly reduced, the immediate surroundings of the heater create the impression of a cozy candlelight atmosphere, and the ambiance is noticeably more pleasant. An already existing lighting concept on the terrace or in the gastronomy is overall less affected."     Advantages at a Glance   • Instant heat without preheating• Uniform and targeted heat distribution• Clean, condensate-free, odorless and noiseless• No dust swirling, therefore suitable for allergy sufferers• 2 heating levels 1100W / 2200 Watts• Remote control• Elegant Design• Weather-resistant aluminum-plastic housing• High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light• Adjustable 45° tilt angle – with a large effective area• Usable in the covered outdoor area• LED display• Operating control light• Suitable for wall and ceiling mounting• Energy efficient     Information video on infrared heaters   Technical data  heating capacity max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W Heizart Shortwave infrared heat waves, low glare tubes effective area 9 - 15 m² Voltage 220 - 240 V/50 Hz rated current consumption max. 9.5 A Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg Protection class IP66 (dust-tight and protected against powerful water jets) Min. distance to flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED-Display and parental controls no Timer no Trotec article number: 1.410.003.215 guarantee 2 years

Learn more More Fewer

High-performance infrared patio heater with 3 heat settings Instant, pleasant warmth for patios and balconies – quiet, targeted, low-glare, and conveniently controllable. The Trotec IRS 2000 E provides pleasant warmth on patios and balconies, extending the use of outdoor areas even on cooler days. The infrared heat is transmitted directly to people and objects, making it immediately noticeable – with no long warm-up phase. With its three heat settings of 650 W, 1350 W, and 2000 W, the heat output can be flexibly adjusted to the situation at hand. The high-quality low-glare carbon infrared tube combines pleasant warmth with exceptionally low light emission. The IRS 2000 E is suitable for an effective area of up to max. 15 m² (ideal: 8–10 m²). The infrared heat is clean, condensation-free, and odorless. Since no air is moved by the device, there is neither drafts nor dust swirling. This makes the IRS 2000 E an attractive option for allergy and asthma sufferers as well. For safe operation, the device features an integrated tilt protection. With an IP34 protection rating, the IRS 2000 E is protected against splashing water and is suitable for use in sheltered outdoor areas. Features: 3 heat settings: 650 W / 1350 W / 2000 W Effective area up to max. 15 m² (ideal: 8–10 m²) Low-glare carbon infrared tube Up to 80% less light emission Approx. 5,500 lighting hours Wide heat distribution via reflector mirror 24-hour timer Infrared remote control LED display and operating indicator light IP34 protection rating Integrated tilt protection with warning tone Robust aluminum housing Silent operation without a fan Direct heat without preheating Infrared radiation does not heat the ambient air first, but rather the people and objects it shines on. As a result, the heat is perceived immediately. This makes the IRS 2000 E particularly suitable for targeted use on patios and balconies when quick, pleasant warmth is needed. Low-glare thanks to Low-Glare technology The carbon infrared tube was specifically developed for reduced light output. It generates pleasant warmth while simultaneously producing up to 80% less light emission compared to conventional heating tubes. This ensures that ambient lighting outdoors remains largely undisturbed. With a service life of up to 5,500 lighting hours, the heating tube is also durable and low-maintenance. Convenient operation The desired heat output can be adjusted across three levels. For added convenience, the IRS 2000 E can be controlled via an infrared remote control. The integrated 24-hour timer enables automatic shutdown after the desired operating duration. For patios and balconies The compact pillar design with a round base allows for flexible and space-saving placement. The specially shaped reflector mirror distributes heat over a large area. With an IP34 protection rating, the device is protected against splashing water and is designed for use in sheltered outdoor areas. Safety functions The integrated tilt protection automatically switches off the device in the event of unintentional tipping and also emits a warning tone. The protective grille reduces the risk of direct contact with the heating tube. Technical data Model IRS 2000 E Trotec item no. 1410003920 Heat output 650 / 1350 / 2000 W Maximum heat output 2000 W Effective area 8–10 m² (max. 15 m²) Nominal current consumption 8.6 A Mains connection 220–240 V / 50–60 Hz Connection plug EU plug + fixed adapter for Switzerland Protection rating IP34 Cable length 1.80 m Dimensions (length × width × height) 300 × 300 × 1,000 mm Minimum distance above 100 cm Minimum distance around the unit 100 cm Weight 5 kg Remote control battery CR 2025 / 3 V Warranty 2 years

Learn more More Fewer

The Heater 200LS is an affordable yet high-quality infrared-based heating solution. It can be mounted on the ceiling using the included chain, similar to a lampshade, and thus provides warmth from above. It is ideal for creating a cozy table setting on the balcony, as well as for providing targeted heating in workplaces such as basements, workshops, or production halls.The 200LS has a protection class of IP24. This means that it is protected against splashing water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, which means at a normal room height of about 2.5m, it covers a radius of about 2-3 meters.Heater:The heater has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating power can thus be adjusted at the device itself with the push of a button, but also via the included remote control to either 1000W or 2000W. The heating tubes emit not only heat during operation but also a bright light, which sufficiently illuminates the warmed area.LED light:Additionally, the 200LS is equipped with an LED lamp that can be turned on independently of the heating operation. It emits a subtle white light downwards. The brightness of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when heating is not in operation.The device is almost entirely made of metal and impresses with its very robust workmanship.Properties & Advantages over other heaters:• Equipped with two individual heating tubes• IP24 - suitable for indoor and outdoor use• Heating power selectable 1000 watts or 2000 watts• Integrated, separately switchable LED lamp as a light source even without heating operation• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning the LED light on/off.• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataVoltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 WHeating levels: 2 (1000 W / 2000 W)Dimensions (H/W/D): 265 x 430 x 430 mmProtection class: IP24 (protected against foreign bodies >12.5 mm and against splashing water)Weight: 3.5 kg

Learn more More Fewer

The heater 210S is a powerful infrared heater in a stylish industrial look. It can be attached to the ceiling using the included chain, similar to a lampshade, and thus warms from above. It is ideal for creating a cozy table setting on the balcony, but also for providing targeted heating in workplaces such as basements, workshops, or production halls.The heater has protection class IP54 - which means protection against splashing water - and is therefore also suitable for outdoor use.The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, meaning at a normal room height of about 2.5m, it covers a radius of approximately 2-3 meters. Heater:The 210S is equipped with two powerful carbon heating tubes, which have a significantly lower glare effect than conventional heating tubes. The heating power can be selected in three levels: 900W / 1200W / 2100W. The heating strength can be adjusted by pressing a button on the device itself, as well as via the included remote control.The device is almost entirely made of metal and impresses with its very robust workmanship.Features & Advantages over Other Heaters:• Equipped with two individual heating tubes• IP54 - suitable for indoor and outdoor use• Three heating levels 900 / 1200 / 2100 W (fits standard household socket)• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning on/off• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2100 WHeating levels: 3 (900 W / 1200 W / 2000 W)Heating tubes: 2 carbon heating tubesHousing: Metal, light gray paintedDimensions (H/W/D): 310 x 475 x 475 mmProtection class: IP54 (protected against dust in harmful amounts and against splashing water)Weight: 3.5 kg

Learn more More Fewer