"Those who like their laundry to dry faster will find the WT 240D to be a good and powerful device. The WT240 is the most economical of the new WT series from Aerial. A reliable helper for frequent use in the laundry room."serviceThe easily understandable digital control on the front allows for very simple operation of the device. The display provides current information about the room condition and the selected program. Available display languages include German, French, Italian, and English.
Drying programs:
Pressing a button starts the drying program. The dehumidifier runs until the laundry is dry and then automatically switches off. With the help of three pre-programmed drying levels, you can choose between damp, iron-damp, or cupboard-dry. All pre-programmed moisture values can be changed at any time according to your own preferences.
Furthermore, the dryer features a general room monitoring system to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the threshold for mold and odor formation of 60% relative humidity. This moisture level can also be adjusted as needed. Unlike the laundry drying programs, the dryer does not turn off completely in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also resume.
In both programs, both the current humidity and the target humidity are displayed.
Blower and fan stages:
The blower is an electronically operated, energy-efficient radial fan. The stream of dry air blows slightly downward from the outlet, meaning that the air is directed into the lower area of the laundry, where the laundry is usually the most damp. This downward air channel is also very practical when placing a drying rack in front of the device.
Selectable fan speeds: The WT tumble dryers are the only devices of this kind where the fan speed can be adjusted. Even the lower setting already has a quite respectable air throughput, but significantly reduces the operating noise. If the laundry load is fully packed, the high fan speed is recommended to push the dry air as forcefully as possible through the laundry. This results in faster and more even drying results. At the high setting, the stream of dry air also reaches distant laundry items up to about 8m away.
Adjustable air louvers:
Flexible slats are installed at the air outlet, which can be adjusted laterally and in height, allowing the air to be more accurately adapted to the length/width of the clotheslines.
Direct hose connection:
The water extracted from the laundry runs into a hose, which is installed slightly below the middle of the back wall of the WT devices, instead of the usual position at the bottom of the device. This is advantageous compared to other models when the slope to the drain is not very steep or when the device is to be hung slightly lower. The device does not have a built-in pump, so the hose must have a continuous slope to the drain. If no drain is available, the water can of course also be easily collected in a bucket placed under the device. We offer suitable inlet pipes and buckets in our range if needed.
Air filter:
The humid room air is drawn in at the upper part of the front. A magnetically adhering filter with a frame cleans the air of coarse dust and lint, keeping the inside of the device clean. The filter consists of a very fine, closely woven nylon mesh. This has a high cleaning power, is easy to clean, and typically lasts for the entire lifespan of the dryer with proper care.
Memory function:
The settings are stored in the room monitoring program. In the event of a power interruption, the WT resumes operation with unchanged settings. It is therefore also suitable for operation with a timer, for example, when you only want to run the dryer during off-peak hours. If the power is interrupted during the laundry drying program, the device goes into standby and must be restarted.
Room temperature:Technically, the WT dryers from Aerial can be used down to 8°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.
Made in Europe:
The WT dryers are manufactured by the Dantherm Group in Europe. They have received very good ratings from the Swiss testing authority for tumble dryers "Swiss Testing."
Service-friendly device construction:
With just a few simple steps, the entire cover can be removed from the device. This makes handling easier in case of cleaning needs or service work, as the device does not need to be taken off the wall.
mounting on the wall
The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as a 2m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.
"Upon request, we will professionally install the dryer at your home within a radius of up to 120 km for Fr. 210.-. For further distances, price upon request."
Calculate distanceImportant:
• Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by you through an appropriate craftsman, unless already in place.
• If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall installation, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.
Technical data
| drying room: | up to 20 m² |
| Drying performance: | 1.93 Kg/h |
| Consumption per kg of laundry: | 0.26 kWh |
| Energy efficiency: | A1 |
| Tension: | 230V / 50Hz |
| Power consumption: | max. 620W or 440W (at 20°C/60% r.H.) |
| Sound pressure level: | 2.5 m distance 62 dB(A)
2.5 m distance 68 dB(A) fan level 2
(our measurement) |
Examples of
dehumidification performance
and consumption: | at 30°C / 80% r.H = 36.5 L/24h (Power consumption: 570 W)
at 27°C / 60% r.H. = 21.6 L/24h (Power consumption: 500 W)
at 20°C / 60% r.H. = 16.8 L/24h (power consumption: 440 W)
at 10°C / 70% r.H. = 7.2 L/24h (power consumption 390 W) |
| air circulation volume: | 830 m³/h |
| condensate tank: | No integrated tank. With hose connection, the water
directly drained into the drain or into a bucket. |
| Compressor: | Rotary compressor |
| refrigerant: | R407C |
| Dimensions (H/W/D): | 80.9 x 64.0 x 34.5 cm |
| Weight: | 40 Kg |
| Business closure: | Digital |
| Ambient temperature: | 8°C ~ 32°C |
| Swiss plug: | Yes |
| hose connection: | Yes |
| Guarantee: | 3 years |
