Trotec Air Purifiers
TROTEC Trotec OZ-ONE Ozone Measuring Device incl. Calibration Certificate
Ozone in the ambient air poses a significant damage potential even at low concentrations. Therefore, compliance with safe ozone limit values is essential for the protection of human and animal health. This measuring device is the ideal instrument for the rapid and precise control or long-term monitoring of ozone concentrations in the ambient air. Ozone, a nearly colorless gas, is produced naturally or generated technically. It consists of an unstable compound of three oxygen atoms (O3), which relatively quickly decomposes back into oxygen (O2). In the O3 compound, it acts as a strong oxidizing and disinfecting agent. It kills germs, bacteria, viruses, and odors up to 3000 times more effectively than a chlorine treatment. Therefore, it is used in various areas for the disinfection of air and surfaces. However, before treated spaces are made accessible again for people and animals, it is crucial that the ozone level is within the permissible range. For this purpose, this measuring device is essential. The device is characterized by an extremely low cross-sensitivity to other gases or VOCs and delivers fast, highly precise measurement results even at minimal ozone concentrations. Numerous integrated functions, such as the ozone zero adjustment, the reference value measurement for short-term and time-weighted averages, as well as the switchable value display from ppm to µg/m³, make this responsive measuring device an indispensable tool for the accurate determination of ozone loads. Furthermore, it serves as an environmental measuring device that captures air temperature and humidity, as well as calculates dew point and wet bulb temperature. The dual display allows for the simultaneous display of two measurement values. "For long-term measurements, the device can be mounted on a tripod. It features a mini USB port and a 9V barrel jack, allowing for both battery operation and permanent mains operation. For mobile applications, a power bank can be connected to the mini USB port if needed."Advantages at a Glance • Fast and precise determination of even very low ozone concentrations• Ozone measurement display in ppm or µg/m³• Quick response time• Low cross-sensitivity to VOCs• Ozone null balance function• Ozone reference value measurement (STEL/TWA)• Atmospheric pressure offset for high-precision normal cubic meter measurements• Measurement of air temperature and humidity• Calculation of dew point and wet bulb temperature• Offset setting for air temperature and humidity• Data hold, min, max, and alarm function• Display lighting• ¼-inch thread for tripod mounting• Both battery and mains operation possible for continuous measurements.• Energy-saving automatic shut-off• Including calibration certificate Diverse applications • Workplace measurements in industry and commerce• Environmental analyses• Review of production environments• Limit value controls after the use of ozone generators for odor neutralization or disinfection, for example in the hospitality industry, drinking water treatment, as well as in fire and water damage restoration. Scope of delivery • Measuring device• Batteries• User manual• Calibration certificate• Carrying bag Technical data Ozone (O3) measurement ppm min. 0, max. 1 ppm deviation Ozon (O3) µg/m³ min. 0, max. 1.996 (at 20°C and 1.013 hPa) deviation Temperature 0 to +50°C resolution 0.1 °C deviation ± 0.6 °C moisture0 to 99.9% RH resolution 0.1 % r.F. Deviation 0 % - 10 %Deviation 10.1 % - 70 %Deviation 70.1 % - 99.9 % 5%3%5% Battery (internal) 4 x AAA 1.5V (included in the package) Weight 185 g Masse (L x B x H) 290 x 110 x 80 Trotec article no. 3.510.006.110 Guarantee 2 years
Fr. 479.00
TROTEC Trotec Oxygen Regenerator Zerozon200
This professional ozone destroyer accelerates the breakdown of residual ozone by ten times compared to natural ozone decay. The ozone treatment of indoor spaces is a proven and effective method for large-scale disinfections and for eliminating odors after fire and water damage. Until now, it has been necessary to wait for the lengthy natural ozone decomposition after each ozone treatment, during which unoxidized ozone slowly breaks down into oxygen. Only after the prescribed limit values were fallen below could the treated areas be safely re-entered. In indoor environments, the half-life of ozone under typical conditions is 30 to 60 minutes, meaning that the ozone concentration in the room air is halved only hourly. The larger the room and the more powerful the ozone disinfectant, the higher the ozone concentration and the longer the natural degradation process takes. In rooms with regular disinfections, the reagent reduction additionally prolongs the ozone degradation phases, leading to longer waiting times and higher usage failures. A cross-ventilation could accelerate ozone degradation, but often the necessary ventilation options are lacking in treated spaces such as hotel rooms with secured windows or windowless basements, storage rooms, and archives. This device enables a technical regeneration of oxygen in ozone-contaminated rooms, significantly accelerating their economic reusability. Depending on the conditions of use, rooms can be safely re-entered and utilized after just one-tenth of the time required for natural ozone decay.Unique master-slave solution for accelerated ozone degradation The "Zerozon" has been specifically designed for combined use with all ozone disinfectors of the "Airozon" Professional Series. For this purpose, the device is equipped with a dedicated power supply and a control console for the connected Airozon device, thus enabling the synchronized combined operation of both devices. Alternatively, standalone operation is also possible. Please note that this additional socket attached to the device complies with EU standards. For devices with Swiss plugs, this means that only two-pole Swiss plugs can be connected. Three-pole T12 plugs, on the other hand, do not fit without an adapter. In the Airozon combined operation, the Zerozon automatically switches off the connected Airozon device after reaching the configured treatment duration and automatically begins the technical oxygen regeneration. For this purpose, the Zerozon can be equipped with powerful special filters that enable accelerated catalytic ozone decomposition. Advantages at a Glance • Causes a breakdown process up to 10 times faster compared to natural ozone decay after prior room ozonation.• Compared to natural ozone decomposition, ozone-decomposed rooms can be safely re-entered after just one-tenth of the time, depending on the conditions of use.• Equipped with a dedicated power supply and a control console specifically for connected Airozon Professional devices (only compatible with EU plug)• Original fleece-coated catalyst special filters for extremely fast ozone decomposition• Robust, multiple stackable construction – can also be stacked with the dimensionally identical ozone disinfectant Airozon 20000 as a composite.• Also usable in standalone operation • Made from high-quality production, manufactured in Germany Technical data Air volume flow max. 680 m³ / Std. voltage 220 - 240 V/50 Hz Nominal current consumption max. 0.8 A Power consumption max. 175 W Recommended Coverage 10 A Cable + plug approx. 3m cable, EU plug with Swiss fixed adapter T12 Masse (H x B x L) 400 x 370 x 547 mm Weight 15 kg operating hour meter and Trotec article no. 1.180.000.019 Guarantee 2 years
Fr. 1'749.00
