Description
These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom.
The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.
These panels are also used in modern construction drying to effectively remove moisture from walls and floors.
Application examples
Heating of Living Spaces: Whether living area, conservatory, or bathroom, as a supplementary heating solution, the infrared flat heater creates warmth directly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation.
Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters.
Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves.
Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.
Advantages at a Glance
• Efficient heating process with environmentally friendly IR-C radiation
• Heat transport via light waves - direct object heating without convective loss
• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.
• Clean heat - no noise, no smell
• no condensate, no oxygen consumption, no unpleasant dust swirling
• Integrated suspension device for mounting on wall or mounting supports
• Also usable as a freestanding device (suitable stand feet are available from us as accessories)
• Ready to use immediately - no additional installations or expensive renovations required
You can find the ErP table for this heating device above in the "Documents" section.
Please note: The device is only suitable for use in well-insulated rooms or for occasional use.
Calculation of the power requirements for rooms up to 2.5 m ceiling height
|
Sound insulation quality of the rooms
|
good to very good
|
medium
|
uninsulated/old building
|
1 exterior wall
|
50 W/m²
|
70 W/m²
|
90 W/m²
|
the additional exterior wall
|
+10 W/m²
|
+10 W/m²
|
+10 W/m²
|
The required infrared heating power is calculated as follows: Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W. |
Technical data
Heating output |
450W |
Heizart |
Infrared heat waves |
Suitable room temperature |
0 - 60 °C |
Heating surface |
0.43 m² |
Heating levels |
1 |
voltage |
220 - 240 V/50 Hz |
Nominal current consumption |
max. 2 A |
Power consumption |
max. 0.45 kW |
Housing |
Aluminium |
Cable length |
approx. 1.9 m |
Plug |
EU plug with Swiss adapter |
Dimensions W x H x D |
705 x 605 x 22 mm (without stand feet) |
Weight |
4 kg |
Protection class |
IP54 |
Overheating protection |
and |
Trotec article no. |
1.410.003.010 |
Guarantee |
2 years |