Description
The ASE400 demonstrates high reliability in the drying of industrial spaces as well as public and water management facilities. Unlike condensation dryers, adsorbers have a more or less constant dehumidification performance down to well below freezing point. Since the condensate would freeze at these cold temperatures, the extracted moisture is evaporated through a hose and expelled from the room. In water damage drying, the ASE400 is also a powerful device for drying larger areas, ideally in combination with a turbine.
Adsorption dryers operate without a compressor. Simply explained, the humid air is passed over a silica gel wheel and divided into dry air and humid air. The dry air is blown into the room but can also be directed via a hose into cavities such as shafts, substructures of bathtubs, etc., or into another device such as a compressor. On the other side of the dryer, the humid air exits, and this can also be discharged via a hose.
"Heat is required for this process. The ASE400 features a high-performance rotor that is optimized for maximum water absorption under varying inlet conditions. The mechanical strength of the rotor's surface is extremely high. Non-flammable. The rotor is maintenance-free and washable. Dynamic, safe, and self-regulating PTC heating element."
Air intake rear: through wide air filter (can be removed for cleaning)
Air outlet: Dry air front side: Ø = 100 mm, regeneration air back side Ø = 80 mm
serviceThe ASE400 is ready to plug in. It has a toggle switch for turning on/off. Optionally, a hygrostat can be connected via the prepared plug to regulate the desired target humidity. The device is suitable for unattended continuous operation. Furthermore, the ASE has an operating hour counter as well as a counter that measures power consumption in kWh. Adjusting the air volumes is not necessary.
Characteristics • Stackable, quiet, maintenance-friendly
• Energy efficient through ecoDRY rotor
• Precisely adjustable with built-in hygrostat
• Cost and duration control through combination meter for
• Operating hours and kWh
• Robust stand device with foldable carrying handle
• 4 rubber buffers (abrasion-resistant and non-staining) on the underside protect sensitive floor surfaces
• Air intake: process and regeneration air together
• with air filter and silencer
• Housing: Stainless steel / powder-coated steel sheet
• Connection cable 4.5 m with power plug
• PTC heating elements for maximum operational safety
• Optional with calibrated power meter
Technical data
| Tension | 1 x 230V / 50 Hz |
| Power consumption | 2200W max. |
| insurance | 10A |
| Sound pressure level | 3 m distance 60 dB(A) |
| dehumidification performance | 36kg/day (20°C / 60% r.H.)
Liters per kilowatt-hour = 0.75l / kWh
Kilowatt hour per liter = 1.33 kWh / l |
| Airflow | Process air volumes: 480 m³/h
Regeneration air volume: 185 m³/h |
| Weight | 25 Kg |
| Dimensions (H x W x D) | 410 x 395 x 560 mm |
| Ambient temperature | -10°C ~ 35°C |
| ambient humidity | 10 to 95% RH |
| control panel | on/off switch
kilowatt-hour meter
Connection option for external control |
| Swiss plug | Yes |
| guarantee | 2 years |
