Description
This maintenance-friendly adsorption dehumidifier guarantees high dehumidification values. With its standard stainless steel housing and an electrical control box in IP53 design, it is also corrosion-resistant and withstands adverse operating environments.
"It is ideally suited for many drying tasks or dry air production. Typical applications include drying in the chemical, pharmaceutical, and food industries, as well as in mechanical engineering. Furthermore, it is also used to protect machines, inventory, and buildings from corrosion, condensate, or mold formation, for example in water engineering facilities or electrical control centers."
High dry air performance even at low dew point
The TTR series adsorption dehumidifiers take advantage of the vapor pressure difference between the humid air and a hygroscopic sorbent material, which is incorporated into a drying wheel that has an extremely large surface structure. This process ensures high dehumidification performance even at low humidity and low air temperatures.
TTR-Trisorp-Dual-Principle
Two separate air ducts lead process and regeneration air through each fan. The process air to be dehumidified is drawn in with the help of a fan and flows through the dehumidification sector of the continuously rotating drying wheel, where the moisture contained in it is removed by binding in the sorbent. From there, it flows out as dry air.
When flowing through the heating register, the air is heated significantly and can thus reduce its moisture. Subsequently, it passes through the regeneration sector, where it can reabsorb the moisture bound in the silica gel and discharge it outside through the moist air outlet.
Series-integrated heat recovery (HR)
A major advantage of the TTR adsorption dryers is the already integrated heat recovery system as standard. Depending on the ambient conditions, this saves 20 - 50% energy. Thus, the savings at 20° C and 60% relative humidity (i.e., under "normal" room conditions) is about 50%. In principle, the regeneration air is also drawn in with a separate fan and passed through the purge sector. As the drying wheel heats up due to the released adsorption heat and the regeneration heat, the purge sector serves for heat recovery and cooling of the drying wheel. This reduces the required energy input and improves the dehumidification performance, especially at lower dew points.
Wide range of applications
Due to its very high dehumidification performance in continuous operation even at low dew points, this dehumidifier is suitable for a variety of applications, for example:
• Pre-dehumidification of supply air to maintain the trickling and flowability of hygroscopic products in storage, conveying, and dosing systems.
• Process air dehumidification for gas turbines and humidity control in gas distribution stations
• Ice-free maintenance of freezing tunnels and deep-freeze storage
• Dehumidification or process air drying in the fields of the chemical and pharmaceutical industry, electronics and semiconductor industry, or food industry
• Avoidance of condensation formation, material changes, or granulate clumping in plastic processing
• Process air drying and plant dehumidification in the steel industry
• Air drying and dew point control in cold storage rooms
• Drying of water engineering facilities and pumping stations
• Climate conditioning of ammunition depots or military technical equipment storage facilities
• Dehumidification and dew point control in clean and dry rooms
• Climate conditioning in dry air storage or in timber storage halls
Value added without extra cost
The dryer is already equipped as standard with numerous functions and features that guarantee reliable operation, easy handling, and long service life with low maintenance effort:
• Wide voltage
• Rotor speed control (rotor and drive)
• Overtemperature safety system with restart lock (regeneration air)
• Operating temperature management (regeneration air)
• Filter monitoring (per air flow and collective warning light)
• Configurable air direction reversal (conversion with minimal effort)
• Terminals for external ON/OFF
• Potential-free contacts (operation, fault, filter)
• Operating hour meter
• Air volume regulation
• integrated heat recovery
• Robust and maintenance-friendly stainless steel housing
• Duoventic control* for regeneration air and process air fan respectively
• Overtemperature safety system with restart lock (regeneration air)
• G4 air filter in Z-line design with electronic monitoring and collective warning light
• External connection terminals On/Off and connection terminals Hygrostat
Possible additional options
• Tax module Millennium
• Flowmatic-Flow Rate Control
• Humidity/Temperature Control
• Dew Point Sensor -80 °C to +20 °C
• Touch screen for device operation
• Remote connection GSM
• Remote connection WLAN
• Heat exchanger module
• Electric reheater for dry air
• External Hygrostat HG 120
• External Hygrostat HG 125
• Transport frame (stackable), with wheels
Advantages at a Glance
• High dehumidification performance even at low dew points
• Robust stainless steel housing
• Reliable silica gel adsorption rotor
• Configurable air direction reversal (conversion with minimal effort)
• Duoventic control – the performance of each fan can be individually adjusted using a potentiometer.
• TTR-Trisorp-Dual-Principle with separate guidance of process and regeneration air for a pressure-neutral recirculation operation
• Electric regeneration heating
• Filter monitoring (per air flow and collective warning light)
• Individually configurable through a variety of equipment options for almost every application.
*According to Duoventic, the performance for each fan can be independently adjusted via a potentiometer; no throttling devices are required on-site.
A notice: This device is available under the brands "Trotec" and "Dantherm".
Technical data
dry air
Dehumidification at 20°C/60% r.H. |
7.4 kg/hour = 177.6 kg/day |
| Air volume blowing free | 1750 m³/h |
| nominal air volume | 1450 m³/h |
| external pressing | 300 Pa |
| connection inlet Ø | 250 mm |
| connection outlet Ø | 250 mm |
| | |
regeneration air
nominal air volume |
270 m³/h |
| external pressing | 300 Pa |
| connection inlet Ø | 160 mm |
| connection outlet Ø | 160 mm |
| | |
| working principle | TTR-Trisorp-Dual |
| Ambient temperature | -20 to +40 °C |
| Ambient humidity (non-condensing) | 0 - 100 % r.F. |
| power connection | 380 - 480 V/50 - 60 Hz |
| rated current consumption | 15 A |
| Installed capacity | 9.8 kW |
| heating capacity | 9 kW |
| recommended coverage | 16A |
| electrical connection | terminal connection |
| Suitable for continuous operation | and |
| Dimensions H x W x D | 942 x 649 x 734 mm |
| Weight | 100 kg |
| Country of production | Germany |
| Trotec article no. | 1.110.000.160 |
| guarantee | 2 years |
