The medium-sized ASE adsorption dryer from Aerial. Handy yet powerful, making it ideal for flexible use in drying water damage or for keeping rooms dry with permanent moisture exposure. The mobile adsorbers of this type are also suitable for industrial applications where low air humidity is required, for example in production facilities.
Adsorption dryers have a practically constant dehumidification performance regardless of the room temperature. They are therefore also suitable for use in cold environments, even below freezing point. In principle, the air is passed through a continuously rotating sorption rotor, which is a wheel made of a very moisture-absorbent material. The moisture absorbed by the rotor is expelled from the device by a heated (PTC heating) air stream flowing in the opposite direction (= regeneration air) and must be vented out of the room. The dry air is directed into the room or through hoses to the areas that need to be dried.
service
The operation is incredibly simple: plug it into the socket, turn on the device with the toggle switch, and set the desired humidity level on the hygrostat. Adjusting the air volumes is not necessary.
Installation of the device
The dryer can optionally be placed outside the damp zone or in the room itself:
Set up outside the damp area, the dry air is blown into the area to be dried using suitable hoses. The moist exhaust air either enters the room where the dryer is located or can also be discharged using hoses, for example, through a window to the outside. This setup is usually used for drying water damage in cavities, such as water damage under bathtubs or in water pits. When drying water damage in dense materials like underfloor drying, the dry air from the adsorption dryer is additionally pressurized with the help of compressors (e.g., with VP2-6 sound boxes from our range) and can thus be directed to hard-to-reach areas.
The arrangement in the room itself is suitable when the entire air volume needs to be kept dry, usually in industrial or commercial applications. The dry air flows directly from the device into the room, while the moist exhaust air is led out of the room via a hose.
Rotor ECODRY G3-MH / PTC Heating ElementThe high-performance rotor is optimized for maximum water intake under varying entry conditions. The mechanical strength of the rotor's surface is extremely high. Non-flammable. The rotor is maintenance-free and washable. Dynamic, safe, and self-regulating PTC heating element.
Characteristics • Stackable, quiet, maintenance-friendly
• Energy efficient through ecoDRY rotor
• Precisely adjustable with built-in hygrostat
• Cost and duration control through combination meter for
• Operating hours and kWh
• Robust stand device with foldable carrying handle
• 4 rubber buffers (abrasion-resistant and non-staining) on the underside protect sensitive floor surfaces
• Air intake: process and regeneration air together
• with air filter and silencer
• Housing: Stainless steel / powder-coated steel sheet
• Connection cable 4.5 m with power plug
• PTC heating elements for maximum operational safety
• Optional with calibrated power meter
Air Inlet: Common air inlet for process and regeneration air at the front Ø = 125 through silencer and air filter.
Air outlet: Dry air: rear side, Ø = 80 mm or 2 x Ø 50 mm, regeneration air: rear side, Ø = 80 mm
Technical data
| Tension | 1 x 230V / 50 Hz |
| Power consumption | 1040W max. |
| insurance | 10A |
| Sound pressure level | 3 m distance 57 dB(A) |
| dehumidification performance | 25.70kg/Tag (20°C / 60% r.F.)
Liters per kilowatt-hour = 1.05 l/kWh
Kilowatt hour per liter = 0.97 kWh/l |
| Airflow | Process air volumes: 300m³/h
Regeneration air volume: 110m³/h |
| Weight | 18 Kg |
| dimension | 37 x 33.5 x 43 cm (including stubs and stand feet) |
| Ambient temperature | -10°C ~ 35°C |
| ambient humidity | 10 to 100% RH |
| control panel | On/Off switch, built-in hygrostat in the
Air intake side, kilowatt-hour meter |
| Swiss plug | Yes |
| guarantee | 2 years |
