TFT Series - the Adsorption Dryer
"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere."
The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.
The TFT devices are optionally available with a heat recovery module.
Characteristics
• On / Off toggle switch
• Hygrostat built-in
• Kilowatt-hour meter
• soldier Stand
• 4 carrying handles on the side
Due to high demand, the delivery time is currently 6-8 weeks from the order.
2 year guarantee
You can see the shipping costs in the shopping cart.
Technical data
Dehumidification capacity: 453.6 kg per day
= 18.90 kg per hour
Air volume / Pressure
Process air volume blowing free: 2000 m³/h
Pressure: 300 Pa
Nominal regeneration air: 820 m³/h
Pressure: 250 Pa
Workspace
Temperature: -30 °C to + 35°C
Humidity: 10 - 95% r.H.
Temperature rise in the heating coil: +80°C
Noise level at a distance of 10m: 66 dB(A)
Power connection: 1 x 400 V/3 / 50 Hz
Power consumption: 27 kW (max. 42.5 A)
Connection cable / Plug
Mass housing (L x W x H) mm: 1285 x 845 x 1255 mm
Diameter hose connections: regeneration air OUT D = 250mm
Regeneration air ONE D = 220x350mm
Process air OUT D = 420x615mm
Process air A D = 420x615mm
Weight: 220 kg
