AirgoClean One – High-Performance Air Purifier with H14 HEPA Filter System The premium air purifier from the Trotec brand for effective virus filtration and continuous air purification in demanding environments. It is ideal for meeting rooms, waiting rooms, doctor's and veterinary practices, law firms, and high-end private residences. Developed and manufactured in Germany, this high-performance air purifier meets the highest quality standards and is equipped with efficient, state-of-the-art brand components. The high effectiveness of the H14 HEPA filter system is scientifically proven. The device features a manual control panel and a remote control. It can also be controlled and monitored via Bluetooth using a mobile phone or tablet app. Key Features and Performance The AirgoClean One ensures reliable air purification through mechanical filter technology and achieves a separation efficiency of 99.995% of all airborne particles down to 0.1 micrometers in size. Eliminated Pollutants and Particles (Separation efficiency ≥ 99.995%): Bacteria and viruses (e.g., SARS-CoV-2, influenza) Fine dust (including ultra-fine dust PM1) Pollen (flower dust) Volatile organic compounds (VOC) Dust mites and house dust Mold spores Animal dander Pet odors Filter System and Technology The AirgoClean One exclusively relies on established mechanical filter technology, without alternative methods such as UV-C, ionization, ozone, or electrostatic filtration, to guarantee 99.995% virus-free clean air. Filter Stage Type Function 1 (Pre-filter) Synthetic pre-filter mat Captures coarse particles (dust, hair). 2 (F7 Pre-filter) F7 filter (ISO ePM10 85%) Effectively retains coarse and fine dust. 3 (HEPA) H14 HEPA filter (according to EN 1822) Separation efficiency ≥ 99.995% for particles from 0.1 - 0.3 µm (viruses, bacteria, allergens). 3 (Optional) Activated carbon filter Neutralizes odors (tobacco, pets, kitchen) as well as formaldehyde   Technical Data General Information Trotec Article Number 1580001100 Fan Type radial Dimensions and Weight Length without packaging 435 mm Width without packaging 400 mm Height without packaging 835 mm Weight without packaging 17 kg Weight including packaging 24 kg Product and Room Information Recommended Room Size (Area) 78 m² Recommended Room Size (Volume) 195 m³ Fan Speeds 6 Power and Connections Mains Connection and Frequency 230 V, 50/60 Hz Power Consumption 170 W Cable Length 1.4 m Connection Plug Type CEE 7/7 + Fixed adapter for Switzerland Number of Batteries per Device 1 Filter Properties Filter Efficiency 99.995% Suspended Particulate Filter HEPA-H14 (EN 1822) IP Protection Class IP Protection Class IP44 Protection Against Contact Protected against access with a wire (Ø ≥ 1.0 mm) Protection Against Water Protection against splashing water from all directions Protection Against Foreign Objects Protected against solid foreign objects Ø ≥ 1 mm Air Volume (Typical Values) Level/Application Air Volume [m³/h] 1 35 2 115 3 230 4 355 5 475 6 600 Max. 600 Sound Level Level/Application (1 m distance) Sound Level dB(A) 1 19 2 34 3 42 4 48 5 52 6 57 Level/Application (3 m distance) Sound Level dB(A) 1 11 2 25 3 33 4 40 5 44 6 49 Scope of Delivery Battery(ies) HEPA H14 Filter Pre-filter F7 Pre-filter mat Silencer Functions and Features Air quality display (numeric/color bar) Air quality history 24h / 14 days Air quality sensor (VOC) CO₂ sensor Particle sensor PM1 / PM2.5 detection Temperature / humidity display Automatic operation (note: not recommended in virus filter mode) App control / IR remote control Digital / Touch display Turbo mode Timer function / Memory function Night mode Tamper protection / Child lock / Lock button Silencer Filter Change Indicator Main filter (visual and acoustic) Pre-filter (visual and acoustic) General filter replacement indicator Mobility Carrying handle bar Plastic transport castors 2 Year Warranty   Instruction Manuals Instruction Manual German PDF User Manual English PDF -> Replacement filters and accessories -> More information about the benefits and use of air purifiers

Learn more More Fewer

Powerful Trotec TTK 355 S Dehumidifier for the Toughest Applications Whether for quickly reducing high humidity or for reliably drying large-volume rooms – the TTK 355 S is designed precisely for such challenges. The device owes its impressive performance to the effective combination of a powerful rotary compressor with a quality fan that processes air volumes of up to 490 m³/h. This high air circulation allows the optimized heat exchanger system to continuously extract large amounts of moisture from the room air – up to 55 liters per day with just one device. A special advantage is offered by the integrated hot gas defrosting automatic: It prevents dehumidification pauses due to fixed defrosting intervals, as is common with many other devices, thus ensuring consistent and efficient performance – even under cooler operating conditions. Features: High dehumidification performance (up to 55 L / day) Encapsulated electronics for dust & moisture protection Efficient hot gas defrosting automatic Rotary compressor (transportable in any position) Stackable & multi-stackable thanks to groove guides Robust chassis with abrasion-resistant rubber wheels Integrated compressor overheating protection German industrial design with registered design protection Mobility & Thought-out Industrial Design The robust chassis with a practical handle bar and large rubber wheels makes transport – even over stairs or uneven ground – remarkably easy. The fitted rubber wheels are abrasion-resistant and leave no marks on delicate floor coverings. Thanks to rotary compressor technology, the TTK 355 S can be transported in almost any position. The technology is housed in a functionally designed, resilient casing in the distinctive Trotec industrial design – aesthetically pleasing, protected, and practical. The stackable design with practical groove guides on the top allows for space-saving storage and safe transport of multiple identical devices. A special protection system shields sensitive electronic components from moisture and dirt. Safe Operation through Intelligent Compressor Overheating Protection During water damage restoration, extreme conditions often prevail with high humidity at simultaneously high temperatures (above 35 °C). With conventional refrigeration dryers, this leads to a drastically reduced lifespan due to an enormous pressure increase in the refrigerant circuit. Therefore, the TTK 355 S is equipped with intelligent compressor overheating protection: sensors continuously monitor temperature development. In case of overheating, the compressor automatically switches off while the fan continues to run. As soon as the system is back in the safe range, the compressor automatically resumes operation. This sustainably extends the service life of the device and protects the building structure. Advantages at a Glance 100 % Trotec – development, design, and manufacturing High dehumidification performance, even at lower temperatures Protection of electronics from dust and moisture Maintenance-friendly construction and easy handling Rotary compressor: transportable in any position Stackable and multi-stackable with identical models Integrated overheating protection for the compressor in extreme room conditions German industrial design with registered design protection Technical Data Dehumidification capacity at 20 °C / 60 % r.h. 27 Liters / Day Dehumidification capacity at 30 °C / 80 % r.h. 55 Liters / Day Air volume max. stage 490 m³/h Room size 140 m² / 350 m³ Temperature range min. 5 – 32 °C Humidity range min. 40 – 90 % r.h. Mains connection 220 – 240 V / 50 Hz Nominal current consumption 6.1 A Power consumption 1.4 kW Recommended fuse protection 10 A Connection plug EU plug with Swiss fixed adapter Cable length 3 m Compressor Rotary compressor Refrigerant type R-454C (650 g, GWP 146, CO2 equivalent 0.0949 t) Pressure suction side / discharge side 0.6 MPa / 2.2 MPa (max. permissible pressure: 3 MPa) Dimensions (H x W x D) 725 x 380 x 390 mm Weight 39 kg Water tank / hose connection 6-liter water bucket + direct hose connection Sound level (1 m distance) 54 dB(A) Trotec item no. 1.120.000.163 Warranty 2 years

Learn more More Fewer

DH 120 Wall-Mounted Dehumidifier for Commercial Use, Basements, and Swimming Pools Powerful, compact wall-mounted dehumidifier for reliable moisture control in commercial spaces, archives, basements, and medium-sized swimming pools – maximum dehumidification performance, high energy efficiency, and reliable building protection. The DH 120 wall-mounted dehumidifier is a powerful device for professional moisture control in demanding indoor environments. It was specially developed for use in medium-sized commercial premises, damp basement areas, archive rooms, and small to medium-sized swimming pools. With an impressive dehumidification capacity of up to 150 litres per day (at 30 °C and 80 % r.h.), the DH 120 reliably ensures stable humidity and effectively prevents the formation of mould, condensation, and moisture-related structural damage. Continuous dehumidification not only protects buildings and materials but also preserves sensitive stored goods, archives, and technical installations in the long term. The robust wall-mounted unit combines high performance with a compact, functional design, making it ideal for permanent use in commercial and technical environments. Features: High dehumidification capacity up to 150 L/day Suitable for commercial use, basements, and swimming pools Robust aluminium casing Corrosion-protected heat exchangers Integrated electronic hygrostat Automatic humidity control 2-stage ventilation Direct condensate drain without tank Energy-efficient continuous operation Wall mounting for space-saving installation User-friendly operation Long service life in professional use Reliable moisture control for optimal indoor air quality The DH 120 ensures constant and precise regulation of humidity in demanding environments. Continuous dehumidification effectively prevents the formation of mould, corrosion, and condensation. This is particularly important in basements, archives, and commercial premises where sensitive materials, documents, or technical equipment are stored. In swimming pools, the DH 120 also contributes significantly to a stable and pleasant indoor climate. Controlled humidity not only protects the building structure but also significantly extends the lifespan of inventory and technical equipment. Efficient operation and economical dehumidification The DH 120 was developed for energy-efficient continuous operation. The powerful compressor and fan technology ensure high dehumidification performance with simultaneously optimized energy consumption. Thanks to modern control technology, the device only operates at full power when it is actually required. This reduces operating costs and ensures efficient energy use. The combination of high performance and economical operation makes the DH 120 ideal for professional applications with persistent humidity problems. Robust construction with high corrosion protection The aluminium casing and cataphorically coated heat exchangers ensure high resistance to moisture and corrosion. This makes the DH 120 suitable for demanding applications such as swimming pools or damp basements. The high-quality workmanship guarantees a long service life and reliable operation even under difficult environmental conditions. Space-saving wall mounting The DH 120 is designed as a wall-mounted unit, allowing for particularly space-saving installation. This is particularly advantageous in technical rooms, basements, or cramped commercial areas. Installation is simple and efficient, while the device can be discreetly integrated into the environment thanks to its functional design. Automatic humidity control The integrated electronic hygrostat continuously monitors the room air and automatically regulates operation. As soon as the set humidity is exceeded, the DH 120 activates itself. This ensures consistent air quality without the need for manual control. This increases comfort and provides reliable protection for the building structure. Efficient condensation principle The DH 120 operates according to the proven condensation principle. Humid room air is drawn in and passed over the evaporator, where it is cooled below the dew point. The moisture condenses and is safely drained away. The dried air is then passed over the condenser, reheated, and returned to the room. This creates an efficient cycle for continuous dehumidification. 2-stage ventilation for flexible adaptation The two-stage ventilation allows the air circulation to be adapted to the respective room conditions. Depending on the humidity level and room size, a choice can be made between two performance levels. This ensures maximum flexibility and optimal adaptation to different operating conditions. Typical applications Medium-sized commercial premises Damp basement areas Archive and storage rooms Medium-sized swimming pools Technical and ancillary rooms Material storage with humidity requirements Renovation and drying projects Why a professional dehumidifier is important Uncontrolled humidity leads to considerable damage in many buildings. Mould formation, material destruction, and corrosion are common consequences of high humidity. The DH 120 reliably prevents these problems, protects the building structure, and at the same time ensures a stable and healthy indoor climate. This makes it an economical and durable solution for professional applications. Advantages at a glance Very high dehumidification capacity up to 150 L/day Suitable for commercial use, basements, and swimming pools Robust aluminium industrial design Corrosion-protected heat exchangers Automatic humidity control 2-stage ventilation Direct condensate drain without tank Energy-efficient continuous operation Space-saving wall mounting Ideal for professional applications Technical Data Operating temperature range 5 – 40 °C Operating humidity range 40 – 80 % r.h. Air flow rate 800 / 1200 m³/h Sound pressure level 51 / 56 dB(A) Dehumidification 150 L / 24 h (30 °C / 80 % r.h.) Dehumidification (reference) 66 L / 24 h (20 °C / 60 % r.h.) Power consumption 2.6 kW Mains connection 230 V / 1 ph / 50 Hz Dimensions 1410 × 365 × 860 mm Weight 130 kg Warranty 2 years

Learn more More Fewer

DH 35 – Compact Wall-Mounted Dehumidifier for Commercial Use & Small Swimming Pools This compact wall-mounted dehumidifier is ideal for effective humidity control in medium-sized commercial spaces, basements, archives, and smaller swimming pools. The DH 35 precisely controls humidity with a dehumidification capacity of up to 52 liters per day (at 30 °C / 80 % RH). This effectively prevents mold growth and reliably protects your premises and stored materials. Thanks to its space-saving wall mounting, the device blends unobtrusively into the room design. The condensate is discharged directly into a nearby drain via a sloped hose, eliminating the need for manual emptying. With its corrosion-resistant aluminum casing and cataphorically coated heat exchangers, this wall-mounted dehumidifier is extremely durable and well-suited even for the demanding conditions in swimming pools. Features: High corrosion resistance (also for swimming pools) Cataphorically coated heat exchangers Robust aluminum housing with modern design Electronic hygrostat for automatic control Direct condensate drainage (no bucket emptying) Space-saving wall mounting Intuitive and simple control panel Environmentally friendly refrigerant R290 Dehumidification Capacity & Consumption The DH 35 ensures consistently precise humidity control within an operating range of 5 °C to 40 °C: 30 °C / 80 % RH: 52.0 liters / 24h (Consumption: 0.72 kWh/L at 30 °C / 60 % RH) 20 °C / 60 % RH: 20.2 liters / 24h (Consumption: 0.83 kWh/L) Technical Data Voltage / Mains Connection 230 V / 1 Ph / 50 Hz Max. Power Consumption 1.0 kW (Nominal current max.: 4.3 A) Max. Dehumidification Capacity 52.0 liters / 24h (at 30 °C / 80 % RH) Dehumidification Capacity (20 °C / 60 % RH) 20.2 liters / 24h Air Flow Rate 500 m³/h Operating Temperature Range 5 °C to 40 °C Operating Humidity Range 40 % to 80 % RH Sound Pressure Level (at 1 m distance) 48 dB(A) Refrigerant / Fill Quantity R290 (0.5 kg / CO₂ equivalent: 0.074 t) Operation & Control Electronic hygrostat, intuitive control panel Condensate Drainage Direct water drainage (sloped hose installation) Mounting Type Wall mounting Dimensions (W × D × H) 885 × 265 × 720 mm Weight 50 kg Warranty 2 years

Learn more More Fewer

The compact wall-mounted dehumidifier DH 20 is ideal for effective humidity control in small commercial spaces and for drying damp basements and archive rooms. With its dehumidification capacity of up to 12.6 litres per day (at 20 °C and 60% relative humidity), it precisely keeps humidity under control. This effectively prevents mould formation and thus protects your premises and materials. Thanks to its elongated shape, the DH 20 also fits above door frames and wall cabinets. Features and BenefitsThis wall-mounted unit not only impresses with its robust construction and user-friendly design: Durability: The aluminium housing and cataphoretically coated heat exchangers offer high corrosion resistance, which also allows for use in swimming pools. Precise Humidity Control: An electronic hygrostat automatically regulates the humidity to the desired level. User-friendliness: The intuitive control panel and simple installation make handling the DH20 straightforward. Practical Water Drainage: Direct water drainage eliminates the need to empty a tank. The extracted condensate is directed into a nearby drain via a sloped hose.  Wall Mounting: The  Modern Design: The discreet and modern design blends seamlessly into any environment. Technical Data Specification Value Operating temperature range 5 - 40 °C Operating humidity range 40 - 80 % Airflow 375 m³/h Sound pressure level (at 1 m distance) 48 dB(A) Dehumidification capacity (30°C/80% r.h.) 30 L/24h Dehumidification capacity (20°C/60% r.h.) 12.6 L/24h Consumption (30°C/60% r.h.) 0.66 kWh/L Consumption (20°C/60% r.h.) 0.82 kWh/L Gas weight R290C/CO₂ equivalent 0.15 kg / 0.0005 t Voltage 230 V / 1 Ph / 50 Hz Power consumption (max.) 0.51 kW Rated current (max.) 2.3 A Dimensions (W x D x H) 900 x 350 x 365 mm Weight 33 kg Warranty 2 years

Learn more More Fewer

The 650S is a robust and powerful construction dryer that stands out for its versatility. It effortlessly handles demanding tasks such as drying after water damage, new construction drying, and maintaining dryness in heated and unheated storage rooms. Manufactured in a specialized European facility, this dehumidifier impresses with its high-quality workmanship and reliable operation. The durable construction of the 650S guarantees a long lifespan, while the easy maintenance and low upkeep costs make operation even more economical. Despite its impressive performance and quality, the 650S is available at an extremely attractive price, making it an excellent choice for professional users.Easy to use The desired target humidity can be continuously regulated between 32 - 100 % using a mechanical hygrostat, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 925 cubic meters per hour. With its stable cart construction and large wheels, frequent changes of location can be easily carried out.     Direct hose connection and optional pump kit   Due to its very high dehumidification performance, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a slope towards the drain. If this is not possible, a suitable pump kit is optionally available, which can pump the water upwards and also outwards.   The operating switch is protected against dust and splashes by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position.     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in the range above 40% humidity. Technically, the dryer can be used at room temperatures down to about 5°C, even in unattended continuous operation.     Optional counters   Included in delivery is no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 91 liters / day Air volume 925 m³/ h Maximum room size 230 m² (550 m³) Minimum room size 4 m² Temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. voltage 220 - 240 V/50 Hz Nominal current consumption max. 9.5 A Power consumption max. 2100 W Recommended Coverage 16 A Cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter Operating noise 56 dB(A) at 1 m distance53 dB(A) at a distance of 2.5 m Dimensions L x W x H 616 x 511 x 1022 mm (incl. guide bracket) Weight 52 kg Automatic defrosting Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower Prefilter and Timer no (operation on timer possible) Continuous operation possible and Memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 16 mm Pump optional available (not included in the delivery) Guarantee 2 years

Learn more More Fewer

This thermo-hygrometer allows for quick and uncomplicated monitoring of a healthy indoor climate, thanks to its clear display and simple operation, making it ideal for living and sleeping areas, offices, training rooms, and meeting rooms. Hair hygrometers, like this model, are characterized by their high precision. Equipped with a high-quality measuring mechanism 'Made in Germany', it ensures a measurement accuracy of ± 3 % r.H. in the range of 20 to 100 % relative humidity. The measuring principle is based on the length change of a specially treated synthetic fiber, which expands in moisture and contracts in dryness. This length change is converted into a rotational movement that controls the pointers on the display. The display of the hygrometer can be adjusted and calibrated through a simple zero point correction.   Ventilation recommendations   The display shows two scales with ventilation recommendations. During the cold season, the room humidity should not exceed 60%, while in summer, a slightly higher humidity of up to 70% in living areas is considered normal. Cooler basements, on the other hand, should not have more than 60% humidity year-round to avoid mold and odor formation. If the humidity remains above the suggested values despite ventilation, the use of a dehumidifier should be considered.     Hanging on the wall   This device is designed to be mounted on a wall. For this purpose, a suitable hole for a nail or screw is incorporated into the housing on the back. To ensure that humidity and temperature values are measured as accurately as possible, large air slots are provided on the sides. These allow for the free flow of room air and thus the best possible measurement. Please note that cold or poorly insulated exterior walls can distort the value. Therefore, optimal placement with reliable measurement values is on walls inside the building.     Recalibration   After transport, it may happen that the mechanical settings are altered due to vibrations. Additionally, accuracy may deteriorate if the thermo-hygrometer has been stored in a very dry environment for a long time. In this case, the humidity display can be easily corrected using a small screwdriver on the side adjustment screw. The temperature screw is accessible from the back of the housing (bottom hole). For calibrating temperature and humidity, it is easiest to use another thermo-hygrometer that you consider reliable for the values. Please note when adjusting by hand that warm, moist hands can also change the displayed values, just like breath.     Technical data   Measuring range temperature 0 - 40 °C Accuracy / Resolution ± 2 °C Measuring range humidity 0 - 100 % Accuracy / Resolution ± 3 % r.F. Housing stainless steel Measurement method Synthetic hair Trotec article no. 3.510.205.012 Guarantee 2 years

Learn more More Fewer

This moisture meter is equipped with robust steel measuring pins that ensure a reliable connection to the test material, thus providing precise measurement results for wood moisture measurement of cut and firewood, as well as for material moisture measurement of soft building materials such as gypsum or plaster. The reading of the moisture values is facilitated by a clear bar scale and the additional direct display of the moisture volume in absolute percentage figures. Two separate scale ranges for wood and building materials increase measurement accuracy. "For wood moisture measurement, a calibration curve is stored in the device, corresponding to the average of the relevant wood species in Europe at a wood temperature of 20 °C. This means that no further settings are required for a quick determination of the wood moisture content." A switch between wood moisture and construction moisture mode is not necessary, as the measurement values can be read on two parallel displayed scale ranges for the respective material. To check the battery status and device function, a reference adapter is integrated into the protective cap of the device. The measuring pins can be easily unscrewed and replaced if necessary.   Advantages for Practice • Wood moisture and material moisture measurement with a device• Double scale for wood moisture and material moisture• Including protective cap with integrated test function• Ready to use• Display of ambient temperature optionally in °C and °F• Calibration curves for common wood types• With LED moisture indicator• Integrated LED flashlight• Easily replaceable puncture steel measuring pins• Direct measurement display in %• Automatic function and battery test• Practical pocket clip• Auto shut-off• Practice-oriented German industrial design - protected design pattern     Scope of deliveryMeasuring device, operating manual     Technical data   Mess principle: Resistance methodElectrode length: approx. 8 mmElectrodes: integrated, replaceablePermissible ambient conditions: 0 to +40 °C / 0 to 85 % r.H.Power supply: 4 x 1.5 V AAADimensions (L x W x H): 155 x 34 x 52 mmWeight: 135 g   Wood moisture Measuring range: 6 to 44 %Accuracy:   Building moisture Measuring range: approx. 0.2 to 2.0 %Accuracy:   Temperature Measuring range: 0 to 40 °C / 32 - 104 °FAccuracy: not specified   Trotec Article No. 3510205025

Learn more More Fewer

This data logger enables precise monitoring of CO2 air quality in indoor environments such as offices, classrooms, or apartments. It features a generous data storage capacity that can hold up to 50,000 measurements, allowing for comprehensive long-term recording of carbon dioxide concentrations, air temperature, and humidity values. The measurement intervals are freely selectable and range from one second to twelve hours. An integrated CO2 traffic light visualizes changes in air quality at a glance. The recorded data can be conveniently transferred to a PC via a fast USB connection and analyzed and logged using the included analysis software. Thanks to the integrated Li-Ion battery, the CO2 data logger is suitable not only for stationary use on a table but also for mobile applications. Furthermore, the data logger offers property management companies and landlords the opportunity to optimally monitor and, if necessary, adjust ventilation behavior by simultaneously recording humidity, temperature, and CO2 concentrations.    Automatic Calibration (Automatic Baseline Calibration)   The currently expected CO2 fresh air value is around 400 ppm (0.04 %vol). This is assumed by the device as the lowest threshold (baseline). A special algorithm now continuously monitors the lowest measured CO2 value from the sensor over several days. This occurs over a preconfigured time interval and slowly corrects any detected long-term drift compared to the expected fresh air value of 400 ppm (or 0.04%vol) CO2.   In normal indoor applications, the carbon dioxide level eventually drops to nearly outdoor air levels over the course of a week. By recording the values over a period of 8 days and subsequently comparing the lowest value with the 400-ppm point, the measuring device determines whether it needs to adjust the zero point or not. This happens completely automatically. The algorithm thus takes advantage of the fact that the CO2 level in buildings/rooms regularly stabilizes at a minimum for a certain period when they are unoccupied. In rooms that are permanently occupied or where there is a constantly elevated CO2 concentration (e.g., greenhouses), this principle of automatic calibration does not work.     Advantages at a Glance   • Accurate and long-term stable NDIR measurement of carbon dioxide concentrations in indoor air• Simultaneous display of CO2 values, room temperature, humidity, date, and time• Minimum and maximum value function for CO2, air temperature, and air humidity• Carbon dioxide alarm function with audible warning for freely definable limit values• Additional symbolic CO2 indicator display comparable to a CO?-traffic light• Large backlit display with easily readable measurement display• Autonomous long-term logging of carbon dioxide concentration, room temperature, and humidity• Storage for 50,000 measurement values• Freely definable storage interval from 1 second to 12 hours• USB interface for measurement data transfer• For table setup and mobile use• PC analysis software     Scope of delivery• Measuring device• Battery(s)• Power supply• USB connection cable• PC Software (Download)• User manual     Technical data   CO2 measuring range 0 bis 9999 ppm accuracy ±75 ppm / ±5 % resolution 1 ppm Measurement range air temperature -5 °C to +50 °C resolution 0.1 °C accuracy ±1 °C Measuring range humidity 0.01 % r.F to 99.9 % r.F. resolution 0.1 % r.F. accuracy ±5 % r.F. Advertisement LCD Power supply 1 x 3.7 V Li-Ion battery or 230 V power supply Sampling + Storage Interval > 1 s interface USB Weight 245 g Masse (L x B x H) 90 x 110 x 98 mm Trotec article no. 3.510.205.015 Guarantee 2 years

Learn more More Fewer

Affordable tensioning set, ideal for securing air hoses to fans or also for everyday use to secure transported belts. Color: bright yellowLength: 2.5 metersStrap width: approx. 25 mmManufactured according to EN121952Ideal for trailers, bike carriersTensile strength approx. 100 kg Trotec Article No. 6.100.001.995

Learn more More Fewer

This air hose adapter is suitable for connecting to the TTV 4500 and can be used to connect hoses with a diameter of 450mm. The hose adapter can be attached to both the front and the back of the fan.     Trotec Article No. 6.100.005.010 (Attachment piece TTV 4500 hose adapter 1 x 450 mm)    

Learn more More Fewer

Proven UV dye for pipe break detection, available in various colors. This dispersion is water-dilutable. In the visible wavelength range, it leaves virtually no detectable traces, whereas when exposed to UV light, it glows intensely.  The product is particularly well suited for leak tests on water-bearing surfaces of flat roofs or for checking drains and downpipes. At its exit points, the fluorescent substance can be detected and made visible under UV light.  Further applications can be found in non-destructive testing (NDT) as well as in leak detection, when capillarity is of secondary importance and no visible traces of the UV tracer should remain.  "So that users can have the optimal UV fluorescent dye for every task, the product is now available in four bright colors. In addition to the established green version, it is now also available in red, blue, and purple."  Important: Luminat is not suitable as a food coloring.  scope of delivery 1 bottle with 1 liter of dye purple  Advantages at a Glance • Proven UV tracer for pipe break detection • No metabolism – optimal for long-term studies • Very intense color luminescence under UV excitation • Color-neutral application – leaves no visible discoloration on most surfaces • 100 % formaldehyde-free fluorescent dye, made in Germany• Available in various colors – for every environmental condition and preference

Learn more More Fewer

Measuring device for the harshest working environments and all relevant measurement quantities   The battery-operated multimeter with integrated flashlight has been specifically designed for safe use in harsh environments. With ten different functions for the most common measurement parameters, this particularly durable current measuring device covers a wide range of applications in the fields of craftsmanship, DIY, hobbies, and automotive. Whether for measurements in building services engineering, professional work with electricity, occasional repairs of household and electronic devices, or issues in automotive electronics – the BE52 impresses even under the most adverse outdoor conditions with its outstanding variety of functions and features. Wherever electricity flows, the multifunction device provides valuable assistance in installation and troubleshooting.    Perfectly equipped for almost all current, voltage, capacitance, and continuity measurements.   The BE52 can perform measurements of direct and alternating voltage, direct and alternating current, capacitance measurements, frequency/duty cycle measurements, resistance measurements, diode tests, as well as acoustic continuity tests.     Especially durable and high-performance True-RMS multimeter   The measured values are clearly displayed on the large, backlit LC display. Thanks to the practical hold function, the measurement values remain readable on the display even after the measurement process. During continuity testing, an acoustic signal indicates a short circuit or a closed circuit, allowing for faster progress as you do not need to keep an eye on the display during the measurement. To keep both hands free for measurement work, a foldable stand is integrated on the back of the device. This allows the measuring instrument to be placed in a clearly readable position on flat surfaces. Energy-saving and practical is the automatic device shutdown (Auto-Power-Off) after 15 minutes of inactivity.      Evaluation and logging including MultiMeasure mobile app   As a true RMS digital multimeter of the latest generation, the BE52 is 100 percent "MultiMeasure Mobile ready" and thus equipped for all requirements of professional measurement data evaluation and documentation. The integrated Bluetooth® interface allows the captured measurement data to be easily and conveniently transferred to a smartphone or tablet, where it can be professionally evaluated or documented using the free MultiMeasure Mobile app (Android and iOS).    The advantageous combination of BE52 and professional MultiMeasure mobile evaluation software enables quick and reliable statements on electricity measurements at any time – including various analysis options such as logging function for long-term measurements, graphical evaluations, reporting function, and data synchronization with our professional software MultiMeasure Professional via Cloud.     Equipment, scope of delivery and technical specification   For safe working within building installations (stationary consumers with non-pluggable connections, distribution connections, permanently installed devices in the distribution board), the Digital Multimeter BE52 complies with measurement category CAT III 600 V. In addition to the particularly durable housing made of impact-resistant plastic, the dust-protected BE52 according to IP40 impresses with double insulation of the measuring device and measuring leads according to insulation protection class II. Optimal conditions for making measurements safely and reliably even in harsh environments.   • LC-Display: backlit• LCD display: 4-digit (max. display 3999)• Dimensions: 121 x 67 x 45 mm• Weight: 205 g    Direct current (V/DC)• Measuring range: 0.4 to 600 V• Accuracy 400 mV: ±(1.0 % +8 Digits)• Accuracy 4V/40V/400V: ±(1.0 % +3 Digits)• Accuracy 600V: ±(1.2 % +3 Digits)    Alternating current (V/AC, 50 / 60 Hz)• Measuring range: 4 to 600 V• Accuracy 4V/40V/400V: ±(1.0 % +5 Digits)• Accuracy 600V: ±(1.2 % +5 Digits)   Direct current (A/DC)• Measurement range: 400 ?A to 10 A• Accuracy 400 ?A: ±(1.0 % +3 Digits)• Accuracy 4000 ?A/40 mA/400 mA: ±(1.5 % +3 Digits)• Accuracy 10 A: ±(2.5 % +5 Digits)    Alternating current (A/AC)• Measurement range: 400 ?A to 10 A• Accuracy 400 ?A: ±(2.0 % +5 Digits)• Accuracy 4000 ?A/40 mA/400 mA: ±(2.5 % +5 Digits)• Accuracy 10 A: ±(3.0 % +7 Digits)   capacity• Measurement range: 40 nF to 4000 ?F• Accuracy 40 nF: ±(5.0 % +35 Digits)• Accuracy 400 nF/4 ?F/40 ?F: ±(3.0 % +5 Digits)• Accuracy 400 ?F: ±(4.0 % +5 Digits)• Accuracy 4000 ?F: ±(5.0 % +5 Digits)   Resistance (Ohm)• Measurement range: 400 ? to 40 M?• Accuracy 400 ?: ±(1.0 % +4 Digits)• Accuracy 4 k?/40 k?/400 k?/4 M?: ±(1.5 % +5 Digits)• Accuracy 40 M?: ±(3.5 % +5 Digits)    frequency• Measurement range: 10Hz - 10KHz• Accuracy: ±(1.0 % +5Digits)    Duty cycle• Measurement range: 1% to 99%• Accuracy: ±(1.2 % +5 Digits)    Integrated flashlight function       Difference between ordinary measuring devices and measuring devices with True-RMS function   A digital measuring device without True-RMS function assumes that the measured AC signal is sinusoidal and converts the measured raw signal for display accordingly. In reality, however, the current flow is never purely sinusoidal; consumers such as switch-mode power supplies, speed or power controllers, etc. cause disturbances that in turn lead to distorted current waveforms. Since these are no longer purely sinusoidal, they cannot be measured correctly without True-RMS function.    True RMS measuring devices can also accurately measure non-sinusoidal signal waveforms and are thus capable of directly determining the true effective value of any alternating quantity. The "True Root Mean Square" (translated: "true quadratic mean calculation") stands for the correct determination and output of the true effective value.     MultiMeasure Mobile App – smart measurement data collection and measurement data evaluation   The free MultiMeasure Mobile app makes the recorded measurement data even more transparent. Just like the analysis software MultiMeasure Studio Professional 2.0 developed by Trotec, which allows for cross-device management, analysis, and report generation of measurement data on the PC, the free app MultiMeasure Mobile for Android and iOS devices also enables professional measurement data management with a variety of useful features. The handheld measuring device BE52, as well as numerous other measuring devices with Bluetooth® interface, are automatically recognized by the app and can be quickly and easily connected wirelessly to the mobile device. The functionality of the MultiMeasure mobile app goes far beyond the simple display of recorded measurement values. All recorded data can be displayed either numerically or in graphical chart form, and can also be recorded as a measurement series for long-term evaluation using the logging function. Even assigning measurement data to different projects (e.g., departments, rooms, buildings, etc.) is effortlessly possible through the multi-tenant app – including text and report templates for professional measurement data reports.     Advantages at a Glance   • Digital multifunction measuring device with a variety of measuring functions • 4-digit LCD display (max. display 3999)• Particularly durable and high-performance • Automatic range selection • CAT III 600 V • AC and DC measurement up to 10 A • AC and DC voltage measurement up to 600 V • True RMS function: precise measurement through direct determination of the true effective value • Resistance measurement• Continuity test and diode test• Measurement of frequency, capacitance, and duty cycle• Hold Function• Impact-resistant housing • Dust protected – Protection class IP40• Isolation protection class II for measuring device and measuring cables• Compatible with the MultiMeasure Mobile App (Bluetooth)• Backlit display• Battery-saving automatic shut-off• Battery status indicator • MultiMeasure Mobile – all app benefits at a glance: • Automatic recognition of the BE52 and other measuring devices with Bluetooth® interface• Quick and intuitive navigation• Numeric or diagram/matrix display of measurement values?• Integrated reporting function for documentation directly on site• Organizer function for measurement data and documents• Customer management already integrated• Diverse analysis options directly in the app• Photo-linked measurement value storage• Matrix measurements, also photo-linked• Complete data synchronization to MultiMeasure Professional via Cloud     Scope of delivery   • Digital-Multimeter BE52• AAA batteries (2x)• Safety leads with test probes (2x) • User manual     Technical data     Generally   Article number 3.510.205.252   Display   Counts 4.000 Messrate   Messrate 3 Hz Housing design   plastic   Interfaces   Connection sockets for 4mm safety plugs (banana)   Messkreis category   CAT III (600 V)   Security   Conformity- yes EN 61010-2-031, Overvoltage category 2 Protection class

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be inserted through the edge strip or other joints after the bases are removed. Comparable to the flat electrode pair M 6-Bi 300. • Isolated shaft to exclude surface moisture.• The electrode length is 300 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

For professional use in industry, on construction sites, or during maintenance work.  The materials used are particularly robust yet surprisingly lightweight fabrics. The thoughtful tensioning system allows for a setup in seconds while still providing maximum stability and sturdiness. The lightfastness of the fabric is also an important factor for various tasks related to electrical installations.   The inconspicuous construction site tent proves itself time and again in everyday practice. Whether in rain or cold - it always offers you optimal protection and enough space for, for example, an electric heater.   Unlike the "250K" model, the "250KE" is equipped at the front with three zippers, allowing the entrance to be rolled up completely or partially. Two zippered ventilation openings with mesh and rain protection cloth are additional features. All zippers are protected from penetrating water by rain protection strips.   Advantages at a Glance • 3 zippers in the front, so that the entrance can be rolled up completely or partially.• 2 lockable vents with grille and rain protection cloth• thought-out system with fiberglass poles• easy to clean polyester cloth• Setup in seconds• incredibly versatile• Transport bag is included• Plastic tent pegs for better grip• maintenance-free and durable• low weight of approx. 25.8 kg• Dimensions of L 250 x W 250 x H 200 cm "Available upon request also individually with your company logo and in your desired colors." Trotec Article No. 4.110.003.075 

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.430

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.480

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.425

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.475

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.420

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.470

Learn more More Fewer

This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.410

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.460

Learn more More Fewer