The powerful direct-fired oil heater for large halls and construction sites
60 kW heating capacity, 1,100 m³/h airflow and a generous 56-liter tank – professional heating for demanding applications.
The IDE 60 D direct-fired oil heater from TROTEC was developed for the fast and powerful heating of large, well-ventilated spaces and covered outdoor areas. With a nominal heat output of 60 kW, it is ideal for professional applications on construction sites, in warehouses, workshops and agricultural buildings.
The heater combines high heat output with a robust construction and practical features. The durable, double-coated steel housing and high-quality stainless steel combustion chamber are designed for use under demanding working conditions. The integrated fuel tank holds 56 liters and features a level indicator, allowing the available fuel quantity to be checked at any time.
The integrated thermostat ensures comfortable operation and allows the desired temperature to be set. An additional connection for an external thermostat is also available. This allows the temperature to be monitored at a location away from the heater and the heating operation to be controlled accordingly.
The powerful axial fan delivers up to 1,100 m³ of air per hour and distributes the generated heat directly into the surrounding area. An electronic flame safeguard and an integrated overheating protection ensure additional operational safety. Thanks to the stable chassis with wheels and a transport handle, the heater can be easily moved within the area of use despite its high power output.
Features:
- Direct nominal heat output of 60 kW
- Airflow of up to 1,100 m³/h
- Integrated 56-liter fuel tank
- Fuel level indicator
- Electronic flame safeguard
- Integrated overheating protection
- Integrated thermostat
- Connection for external thermostat
- Robust, double-coated steel housing
- Stainless steel combustion chamber
- Axial fan
- Chassis with wheels
- Practical transport handle
- Protection rating IPX4
- Suitable for large, well-ventilated spaces
Direct heating with 100% heat output
The IDE 60 D operates on the principle of direct oil heating. Unlike indirectly fired heaters, it has no flue connection for the separate discharge of combustion gases. The generated heat is released directly into the surroundings. This means that the entire generated heat output is available directly at the place of use.
During the heating process, the fuel is atomized in the combustion chamber, ignited and continuously burned. Part of the air drawn in is compressed and used to supply the fuel. At the same time, the fan delivers the required combustion air and generates the airflow in which the hot combustion gases are mixed. The heated air is then directed directly into the room through the air outlet.
This operating principle enables immediate heat release without additional heat losses through an exhaust flue. The thermal efficiency is 100% of the generated heat output. This makes the IDE 60 D particularly suitable for applications where a large amount of heat must be made available quickly and directly.
Ideal for large spaces and demanding applications
With its heat output of 60 kW, the IDE 60 D is designed for heating large, well-ventilated areas. It is particularly suitable for commercial and industrial applications where a powerful and mobile heat source is required.
Typical applications include:
- Construction sites and covered construction site areas
- Large warehouses and storage areas
- Workshops and production areas
- Agricultural halls and farm buildings
- Greenhouses with sufficient fresh air supply
- Tents and covered event areas
- Temporary heating of large workspaces
The device is designed for use without frequent changes of location. The integrated chassis nevertheless allows for easy transport within the respective work area. Thanks to the high heat output, even large air volumes can be heated quickly.
Comfortable temperature control with integrated thermostat
The integrated thermostat allows for demand-based control of the heating operation. The desired temperature can be set directly on the device. This allows the heat supply to be adapted to the respective requirements without the heater having to be constantly monitored manually.
For additional flexibility, the IDE 60 D features a connection for an external thermostat. This allows the temperature to be monitored at a different location in the area to be heated. This is particularly advantageous if the heater is placed, for example, in a corner of a hall or outside the actual work area.
External temperature monitoring enables more demand-based control and supports comfortable heating operation even in larger spaces. The external thermostat is available separately as an accessory.
Generous 56-liter fuel tank
The integrated fuel tank with a capacity of 56 liters provides a generous fuel reserve for longer heating applications. A practical level indicator allows the tank contents to be checked at any time and makes it easier to plan the next refueling.
The fuel supply is provided by an integrated compressor system. The IDE 60 D can be operated with heating oil EL, diesel or kerosene. This allows the fuel supply to be flexibly adapted to availability and the respective operational requirements.
At a maximum fuel consumption of 5.7 liters per hour, the calculated operating time is approximately 9.8 hours with a completely full tank. The actual operating time depends on the respective operating mode and the required heat output.
Reliable safety equipment
With a heat output of 60 kW, reliable safety equipment is particularly important. The IDE 60 D therefore features an electronic flame safeguard that monitors the combustion process. If a fault is detected or the flame goes out, the fuel supply is interrupted accordingly.
In addition, an integrated safety thermostat protects the device from overheating. If the permissible operating temperature is exceeded, the safety device intervenes. In the event of corresponding overheating, the additional overheating protection can shut down the device completely.
The IPX4 protection rating provides protection against splashing water from all directions. The robust housing and high-quality combustion chamber support reliable use in the intended professional application area.
Important operating instructions:
The IDE 60 D is a direct-fired oil heater. With this type of heating, not only heat but also combustion gases are released directly into the surroundings. Furthermore, additional moisture is generated during combustion.
The device may therefore only be operated in covered outdoor areas or in sufficiently ventilated indoor spaces. A continuous supply of fresh air and sufficient discharge of combustion gases must be ensured at all times. An air exchange rate of at least two air changes per hour is required for operation.
The device is not suitable for use in enclosed, insufficiently ventilated spaces with people or animals. Due to the moisture generated, it must also not be used for construction drying.
The hot surfaces and air outlet must not be touched during operation. The heater must be positioned at the prescribed safety distances. Due to the operating noise of 78 dB(A) at a distance of one meter, suitable hearing protection must be worn.
The device must not be operated in explosion-hazardous areas or in the immediate vicinity of highly flammable substances. Be sure to read the complete operating instructions before commissioning.
Stable chassis for flexible use
The IDE 60 D is equipped with a stable chassis and wheels. This allows the powerful heater to be easily moved within the area of use when required. The practical transport handle makes maneuvering easier and assists with handling when moving the device.
With an empty weight of 28.5 kg with an empty tank, the heater remains relatively easy to transport despite its high power output. The chassis ensures a stable position and makes positioning at the desired place of use easier.
The robust, double-coated steel housing and stainless steel combustion chamber are designed for professional use. Together with the generous tank volume and high heat output, the IDE 60 D offers a reliable solution for regular heating applications in large spaces.
Technical data
| Model |
IDE 60 D |
| Brand |
TROTEC |
| Item number |
1430000074 |
| Heating type |
Direct |
| Nominal heat output |
60 kW |
| Nominal heat output |
51,600 kcal/h |
| Airflow |
1,100 m³/h |
| Fan |
Axial fan |
| Air changes per hour |
At least 2 |
| Temperature increase ΔT |
150 °C |
| Maximum fuel consumption |
5.7 l/h |
| Tank capacity |
56 liters |
| Fuel supply |
Compressor |
| Permissible fuels |
Heating oil EL, diesel, kerosene |
| Thermostat |
Integrated |
| Connection for external thermostat |
Yes |
| Electronic flame safeguard |
Yes |
| Overheating protection |
Yes |
| Housing material |
Steel, double-coated |
| Combustion chamber |
Stainless steel |
| Chassis |
Yes, with wheels and transport handle |
| Protection rating |
IPX4 |
| Operating temperature |
-20 to +40 °C |
| Maximum relative humidity during operation |
90% r.F. |
| Storage conditions |
-20 to +40 °C, 20 to 80% r.F. |
| Connection voltage |
230 V / 50 Hz |
| Current consumption |
1.5 A |
| Sound level (distance 1 m) |
78 dB(A) |
| Dimensions (L x W x H) |
1,140 x 550 x 680 mm |
| Weight with empty tank |
28.5 kg |
| Warranty |
2 years |
Prescribed safety distances
For safe operation, the IDE 60 D must be positioned at a sufficient distance from walls, objects and other potential hazards. According to the manufacturer's specifications, the following minimum distances apply:
- Top: at least 2 m
- Rear: at least 2 m
- Sides: at least 2 m
- Front at the air outlet: at least 3 m
The device must be placed on a stable, level and non-flammable surface. The air inlet and air outlet must remain clear at all times. Also ensure that the required fresh air supply and discharge of combustion gases are ensured.
