TDS 10 electric heater – compact heat with 2 kW
Efficient, condensation-free heat for small rooms, basements, and construction containers – compact, flexible to set up, and easy to operate.
The TROTEC TDS 10 electric heater combines a space-saving design with reliable heating performance. With up to 2 kW, it is suitable for rooms up to approximately 25 m² or 60 m³ and is a practical solution for smaller basements, storage areas, garages, and construction containers.
The desired temperature can be easily regulated via the continuously adjustable thermostat. The fan ensures a continuous airflow, while the heating elements switch on and off automatically as needed. In addition to two heating stages, a fan-only mode is also available.
The unit generates condensation-free heat without consuming oxygen, making it also suitable for indoor spaces. Overheating protection, a thermally protected blower motor, and tip-over protection provide additional safety. Thanks to the auto-restart feature, the heater resumes operation with the previously used settings after a power interruption.
For flexible placement, the TDS 10 is equipped with side mounting threads for optional wall or ceiling installation. Suitable brackets are available as accessories. Recessed controls, a robust metal housing, and the compact format make it a versatile heater for everyday use and professional applications.
The intake room air is heated inside the unit and then blown out. Since a large volume of air is moved, the exiting airflow does not necessarily feel very hot. Instead, the room heats up gradually and evenly.
Features:
- Maximum heating capacity of 2 kW
- Two heating stages plus fan mode
- Continuously adjustable thermostat
- Auto-restart function
- Overheating protection
- Tip-over protection
- Blower motor with thermal protection
- IP24 protection rating
- Condensation-free heat without oxygen consumption
- Prepared for wall or ceiling mounting
- Recessed controls
- Compact metal housing
Precise temperature control
With the integrated, continuously adjustable thermostat, the desired room temperature can be conveniently set. The heating elements switch on automatically when heat is required and switch off again once the set temperature is reached. The fan ensures a consistent flow of warm air during operation.
Additionally, two heating stages of 1 kW and 2 kW, as well as a fan-only function, are available. This allows operation to be adapted to the specific heat requirement.
Integrated safety functions
Overheating protection and a thermally protected blower motor contribute to safe operation. Tip-over protection completes the features. The IP24 protection rating provides protection against the ingress of foreign objects and splash water according to the specified class. For setup and operation, always observe the safety instructions in the manual.
Flexible setup and mounting
Thanks to its compact dimensions, the TDS 10 can be placed flexibly on the floor. Side mounting threads also allow for wall or ceiling mounting with an optionally available bracket. Recessed controls complement the practical, robust design.
Versatile applications
The electric heater is suitable for smaller areas that require targeted heating. Typical locations include construction containers, garages, catering businesses, greenhouses, market stalls, storage and work halls, boat sheds, workshops, and shipbuilding areas.
Advantages at a glance
• Compact electric heater with 2 kW heating capacity
• Two heating stages: 1 kW and 2 kW
• Fan mode without heating function
• Continuously adjustable thermostat
• Automatic temperature control
• Auto-restart after power interruption
• Overheating protection and thermally protected blower motor
• Tip-over protection
• IP24 protection rating
• Condensation-free heat without oxygen consumption
• Wall or ceiling mounting with optional bracket
• Robust metal housing with recessed controls
Technical data
| Model |
TROTEC TDS 10 |
| Item number |
1410000012 |
| Maximum heating capacity |
2,000 W / 2 kW |
| Heating stage 1 |
1,000 W / 1 kW |
| Heating stage 2 |
2,000 W / 2 kW |
| Fan mode |
Yes, without heating function |
| Air volume |
186 m³/h |
| Recommended room size |
Up to 25 m² / 60 m³ |
| Temperature range |
-15 °C to +25 °C ambient temperature |
| Maximum temperature rise |
Up to 95 °C according to manufacturer specifications |
| Thermostat |
Integrated, continuously adjustable |
| Blower |
Axial fan, 1 blower stage |
| Mains connection |
230 V / 50 Hz, 1/N/PE |
| Power consumption |
2,000 W |
| Nominal current |
8.7 A |
| Recommended mains fuse |
16 A |
| Plug type |
EU plug with adapter for Switzerland |
| Protection rating |
IP24 |
| Operating noise |
46 dB(A) at 1 m distance |
| Connection cable |
1.35 m |
| Housing material |
Metal |
| Heating element |
Stainless steel heating element |
| Functions |
Auto-restart, tip-over protection, thermostat, overheating protection |
| Dimensions without packaging (L × W × H) |
210 × 195 × 310 mm |
| Dimensions with packaging (L × W × H) |
240 × 260 × 360 mm |
| Weight without packaging |
3.5 kg |
| Weight including packaging |
4 kg |
| Minimum distance to walls and objects |
Top, back, sides, and front at least 50 cm each |
| Mounting |
Floor placement or wall/ceiling mounting with optional bracket |
Note: Observe the required minimum distances and follow the operating manual and all safety and warning instructions from the manufacturer.
