The powerful direct-fired oil heater for construction sites and large spaces
30 kW heating capacity, 720 m³/h airflow and a generous 19-liter tank – reliable warmth for construction sites, agriculture and well-ventilated work areas.
The IDE 30 D direct-fired oil heater from TROTEC is a powerful and economical solution for professional heating tasks. With a rated heat output of 30 kW, it quickly creates pleasant temperatures even in larger areas. It is particularly suitable for construction sites, agricultural businesses, as well as well-ventilated storage and work rooms.
The device impresses with its robust construction, featuring a durable, double-coated steel housing and a high-quality stainless steel combustion chamber. The integrated fuel tank holds 19 liters and features a practical fuel level indicator, allowing you to check the available fuel at all times.
A thermostat is already integrated for convenient temperature control. In addition, an external thermostat can optionally be used with a 25-meter connection cable. This allows the temperature to be measured directly in the area to be heated, even if the heater is positioned elsewhere.
With an airflow of up to 720 m³/h, the powerful axial fan distributes the generated heat evenly throughout the surroundings. The electronic flame safeguard and integrated overheating protection ensure additional safety during operation. The sturdy chassis with wheels and transport handle makes moving the device easier and makes it a practical companion for demanding heating applications.
Features:
- Direct rated heat output of 30 kW
- Airflow up to 720 m³/h
- Integrated 19-liter fuel tank
- Fuel level indicator
- Electronic flame safeguard
- Integrated overheating protection
- Integrated thermostat
- Connection for external thermostat
- External thermostat with 25 m cable optionally available
- Robust, double-coated steel housing
- Stainless steel combustion chamber
- Axial fan
- Chassis with wheels
- Practical transport handle
- Protection rating IPX4
- Suitable for extended heating applications
Direct heating with 100% heating capacity
The IDE 30 D operates on the principle of direct oil heating. Unlike indirectly fired heaters, it has no flue connection for the separate discharge of combustion gases. The generated heat is released directly into the surroundings. This means that the entire developed heating capacity is available directly at the application site.
During the heating process, the fuel is finely atomized, ignited and burned in the combustion chamber. At the same time, the fan supplies the required combustion air and creates the airflow with which the hot combustion gases are dosed and mixed. The heated air is then blown directly into the room.
This operating principle enables particularly efficient and immediate heat output without additional heat loss through an exhaust flue. The thermal efficiency of direct heating is 100% of the generated heating capacity.
Versatile applications
With its heating capacity of 30 kW, the IDE 30 D is particularly suitable for the temporary heating of larger, well-ventilated areas. The device is intended for use in covered outdoor areas as well as in sufficiently ventilated indoor spaces.
Typical application areas are:
- Outdoor construction sites and covered construction areas
- Agricultural businesses and agricultural halls
- Well-ventilated storage and warehouse areas
- Workshops and commercial workrooms
- Greenhouses with sufficient fresh air supply
- Temporary heating of larger rooms and halls
The robust construction and uncomplicated operation make the IDE 30 D an economical solution for regular heating applications. Especially in applications where direct heat output is required, the device plays to its strengths.
Convenient temperature control with integrated thermostat
The standard integrated thermostat enables demand-oriented control of the room temperature. The desired temperature can be easily set on the device. The heater then operates according to the setpoint and thus ensures comfortable heating operation.
For even more flexible temperature control, an external thermostat with a 25-meter connection cable can optionally be connected. This is particularly practical when the heater is to be positioned outside the actual living or work area. The temperature measurement thus takes place directly at the desired location and not immediately at the heater.
The external thermostat is available as an accessory and is not part of the standard basic equipment.
Generous 19-liter fuel tank
The integrated fuel tank with a capacity of 19 liters enables largely independent operation without an additional external tank. A well-accessible fuel level indicator informs you at all times about the available fuel and makes it easier to plan the next refueling in good time.
The fuel supply is provided by an integrated compressor system. The heater can be operated with EL heating oil, diesel or kerosene. This offers a flexible choice of fuel for different professional application areas.
Reliable safety equipment
For safe operation, the IDE 30 D is equipped with an electronic flame safeguard. This monitors the combustion process and ensures an automatic safety shutdown if the flame goes out. The electronics and the fuel pump are switched off.
In addition, an integrated safety thermostat protects the device from overheating. If an impermissibly high operating temperature is reached, the overheating protection intervenes and switches off the heater completely if necessary.
The IPX4 protection rating offers protection against splashing water from all directions. The robust housing and solid device design are designed for the intended use in demanding work environments.
Important operating notes:
The IDE 30 D is a direct-fired oil heater. With this operating principle, not only the generated heat, but also the combustion gases and the moisture created during combustion enter the ambient air directly.
The device may therefore exclusively be operated in covered outdoor areas or in sufficiently ventilated indoor spaces with continuous fresh air supply and sufficient extraction of combustion gases. Operation is not permitted in enclosed, poorly ventilated rooms where people or animals are present.
Due to the moisture created, the IDE 30 D is expressly not suitable for construction drying. In addition, the prescribed safety distances to walls and other objects must be strictly observed.
The operating noise level is 76 dB(A) at a distance of one meter. Suitable hearing protection must therefore be worn during operation.
Mobile chassis for convenient relocation
Unlike smaller heaters with a simple carrying construction, the IDE 30 D is equipped with a sturdy chassis. The easy-rolling wheels enable uncomplicated transport and make it easier to move the device within the application area.
The integrated transport handle aids maneuvering and allows for convenient handling. The chassis is particularly practical for longer heating applications when the device needs to be positioned at a specific location and moved if necessary.
The double-coated steel housing protects the construction during daily work use. Together with the stainless steel combustion chamber and the generous fuel tank, this creates a robust heater for professional applications.
Technical data
| Model |
IDE 30 D |
| Brand |
TROTEC |
| Item number |
1430000065 |
| Heating type |
Direct |
| Rated heat output |
30 kW |
| Rated heat output |
25,800 kcal/h |
| Airflow |
720 m³/h |
| Fan type |
Axial fan |
| Temperature increase ΔT |
210 °C |
| Maximum fuel consumption |
2.8 l/h |
| Tank capacity |
19 liters |
| Fuel supply |
Compressor |
| Permissible fuels |
EL heating oil, diesel, kerosene |
| Thermostat |
Integrated |
| Connection for external thermostat |
Yes |
| External thermostat |
Optional, with 25 m cable |
| Electronic flame safeguard |
Yes |
| Overheating protection |
Yes |
| Housing material |
Steel, double-coated |
| Combustion chamber |
Stainless steel |
| Chassis |
Yes, with wheels and transport handle |
| Protection rating |
IPX4 |
| Operating temperature |
-20 to +40 °C |
| Maximum relative humidity during operation |
90% RH |
| Storage conditions |
-20 to +40 °C, 20 to 80% RH |
| Power supply |
230 V / 50 Hz |
| Current consumption |
1.25 A |
| Power consumption |
230 W |
| Recommended fuse |
10 A |
| Connection cable |
1.2 m |
| Plug type |
CEE 7/7 |
| Operating noise / Sound pressure level (1 m) |
76 dB(A) |
| Dimensions (L x W x H) |
830 x 430 x 560 mm |
| Weight without packaging (empty tank) |
18 kg |
| Warranty |
2 years |
Prescribed safety distances
For safe operation, the heater must be positioned with sufficient distance from walls and other objects. According to the manufacturer's specifications, the following minimum distances apply:
- Top: at least 2 m
- Rear: at least 2 m
- Sides: at least 2 m
- Front at the air outlet: at least 3 m
The device must stand on a stable, level, and non-flammable surface. The air intake and air outlet must not be covered under any circumstances. Sufficient fresh air supply and safe discharge of combustion gases must be ensured at all times.
Suitable accessories
Suitable accessories are available for additional flexibility and demand-oriented operation. These include in particular:
- External thermostat for the IDE series with 25 m connection cable
- Oil hose including quick-release coupling, 5 m
- Connection kit for an external oil tank
- Suitable extension cables for the electrical connection
The accessories are available separately and enable individual adaptation of the heater to the respective application conditions.
