Here you will find a large selection of adsorption dryers for commercial and residential buildings.
Dehumidifiers with adsorption technology are suitable for keeping individual rooms or entire buildings dry, especially in cold temperatures. They can also be integrated into ventilation circuits to dry the air before it is released into the rooms.
Products
TROTEC Trotec DH 120 Luftentfeuchter Wandmontage
Der kompakte Luftentfeuchter für an die Wand DH 120 eignet sich bestens für eine effektive Feuchtigkeitskontrolle in mittelgrossen Gewerberäumen und zur Trocknung von feuchten Kellerzonen und Archivräumen sowie mittelgrossen Schwimmhallen.Mit seiner Entfeuchtungsfähigkeit von bis zu 150 Litern pro Tag (bei 30 °C und 80 % relativer Luftfeuchtigkeit) hält er die Luftfeuchtigkeit präzise unter Kontrolle. Das beugt effektiv der Bildung von Schimmel vor und schützt so Ihre Räumlichkeiten und Materialien. Merkmale und VorteileDieses wandmontierte Gerät überzeugt nicht nur durch seine robuste Bauweise und sein benutzerfreundliches Design: Langlebigkeit: Das Aluminiumgehäuse und die kataphoretisch beschichteten Wärmetauscher bieten eine hohe Korrosionsbeständigkeit, was u.a. auch den Einsatz in Schwimmhallen ermöglicht. Präzise Feuchtigkeitsregelung: Ein elektronischer Hygrostat regelt die Luftfeuchtigkeit automatisch auf den gewünschten Wert. Benutzerfreundlichkeit: Das intuitive Bedienfeld und die einfache Installation machen die Handhabung des DH 120 unkompliziert. Praktischer Wasserablauf: Der direkte Wasserablauf erspart das Entleeren eines Tanks. Das entzogene Kondensat wird über einen fallend installierten Schlauch in einen nahen Abfluss geleitet. Wandmontage: Das Modernes Design: Das unauffällige und moderne Design fügt sich nahtlos in jede Umgebung ein. 2-stufige Ventilation: Je nach Feuchtigkeit und Raumgrösse kann die Ventilation auf Stufe 1 oder 2 eingestellt werden. Technische Daten Spezifikation Wert Betriebstemperaturbereich 5 - 40 °C Betriebsfeuchtigkeitsbereich 40 - 80 % Luftdurchsatz 800 / 1200 m³/h Schalldruckpegel (in 1 m Abstand) 51/56 dB(A) Entfeuchtungsleistung (30°C/80% r.F.) 150 L/24h Entfeuchtungsleistung (20°C/60% r.F.) 66.0 L/24h Verbrauch (30°C/60% r.F.) 0.51 kWh/L Verbrauch (20°C/60% r.F.) 0.56 kWh/L Gasgewicht R290C/CO₂-Äquivalent 1.6 kg / 0.237 t Stromspannung 230 V / 1 Ph / 50 Hz Stromverbrauch (max.) 2.6 kW Nennstromstärke (max.) 11.7 A Masse (B x T x H) 1410 x 365 x 860 mm Gewicht 130 kg Garantie 2 Jahre
Fr. 8'318.00
TROTEC Trotec DH 20 Luftentfeuchter Wandmontage
Der kompakte Luftentfeuchter für an die Wand DH 20 eignet sich bestens für eine effektive Feuchtigkeitskontrolle in kleinen Gewerberäumen und zur Trocknung von feuchten Keller- und Archivräumen. Mit seiner Entfeuchtungsfähigkeit von bis zu 12,6 Litern pro Tag (bei 20 °C und 60 % relativer Luftfeuchtigkeit) hält er die Luftfeuchtigkeit präzise unter Kontrolle. Das beugt effektiv der Bildung von Schimmel vor und schützt so Ihre Räumlichkeiten und Materialien. Dank seiner länglichen Form passt der DH 20 auch über Türstürze und Wandschränke. Merkmale und VorteileDieses wandmontierte Gerät überzeugt nicht nur durch seine robuste Bauweise und sein benutzerfreundliches Design: Langlebigkeit: Das Aluminiumgehäuse und die kataphoretisch beschichteten Wärmetauscher bieten eine hohe Korrosionsbeständigkeit, was u.a. auch den Einsatz in Schwimmhallen ermöglicht. Präzise Feuchtigkeitsregelung: Ein elektronischer Hygrostat regelt die Luftfeuchtigkeit automatisch auf den gewünschten Wert. Benutzerfreundlichkeit: Das intuitive Bedienfeld und die einfache Installation machen die Handhabung des DH20 unkompliziert. Praktischer Wasserablauf: Der direkte Wasserablauf erspart das Entleeren eines Tanks. Das entzogene Kondensat wird über einen fallend installierten Schlauch in einen nahen Abfluss geleitet. Wandmontage: Das Modernes Design: Das unauffällige und moderne Design fügt sich nahtlos in jede Umgebung ein. Technische Daten Spezifikation Wert Betriebstemperaturbereich 5 - 40 °C Betriebsfeuchtigkeitsbereich 40 - 80 % Luftdurchsatz 375 m³/h Schalldruckpegel (in 1 m Abstand) 48 dB(A) Entfeuchtungsleistung (30°C/80% r.F.) 30 L/24h Entfeuchtungsleistung (20°C/60% r.F.) 12.6 L/24h Verbrauch (30°C/60% r.F.) 0.66 kWh/L Verbrauch (20°C/60% r.F.) 0.82 kWh/L Gasgewicht R290C/CO₂-Äquivalent 0.15 kg / 0.0005 t Stromspannung 230 V / 1 Ph / 50 Hz Stromverbrauch (max.) 0.51 kW Nennstromstärke (max.) 2.3 A Masse (B x T x H) 900 x 350 x 365 mm Gewicht 33 kg Garantie 2 Jahre
Fr. 2'092.00
TROTEC Trotec DH 35 Luftentfeuchter Wandmontage
Der kompakte Luftentfeuchter für an die Wand DH 35 eignet sich bestens für eine effektive Feuchtigkeitskontrolle in mittelgrossen Gewerberäumen und zur Trocknung von feuchten Kellerzonen und Archivräumen sowie kleineren Schwimmhallen.Mit seiner Entfeuchtungsfähigkeit von bis zu 52 Litern pro Tag (bei 30 °C und 80 % relativer Luftfeuchtigkeit) hält er die Luftfeuchtigkeit präzise unter Kontrolle. Das beugt effektiv der Bildung von Schimmel vor und schützt so Ihre Räumlichkeiten und Materialien. Merkmale und VorteileDieses wandmontierte Gerät überzeugt nicht nur durch seine robuste Bauweise und sein benutzerfreundliches Design: Langlebigkeit: Das Aluminiumgehäuse und die kataphoretisch beschichteten Wärmetauscher bieten eine hohe Korrosionsbeständigkeit, was u.a. auch den Einsatz in Schwimmhallen ermöglicht. Präzise Feuchtigkeitsregelung: Ein elektronischer Hygrostat regelt die Luftfeuchtigkeit automatisch auf den gewünschten Wert. Benutzerfreundlichkeit: Das intuitive Bedienfeld und die einfache Installation machen die Handhabung des DH 35 unkompliziert. Praktischer Wasserablauf: Der direkte Wasserablauf erspart das Entleeren eines Tanks. Das entzogene Kondensat wird über einen fallend installierten Schlauch in einen nahen Abfluss geleitet. Wandmontage: Das Modernes Design: Das unauffällige und moderne Design fügt sich nahtlos in jede Umgebung ein. Technische Daten Spezifikation Wert Betriebstemperaturbereich 5 - 40 °C Betriebsfeuchtigkeitsbereich 40 - 80 % Luftdurchsatz 500 m³/h Schalldruckpegel (in 1 m Abstand) 48 dB(A) Entfeuchtungsleistung (30°C/80% r.F.) 52 L/24h Entfeuchtungsleistung (20°C/60% r.F.) 20.2 L/24h Verbrauch (30°C/60% r.F.) 0.72 kWh/L Verbrauch (20°C/60% r.F.) 0.83 kWh/L Gasgewicht R290C/CO₂-Äquivalent 0.5 kg / 0.074 t Stromspannung 230 V / 1 Ph / 50 Hz Stromverbrauch (max.) 1.0 kW Nennstromstärke (max.) 4.3 A Masse (B x T x H) 885 x 265 x 720 mm Gewicht 50 kg Garantie 2 Jahre
Fr. 3'785.00
TROTEC Trotec DH 65 Luftentfeuchter Wandmontage
Der kompakte Luftentfeuchter für an die Wand DH 65 eignet sich bestens für eine effektive Feuchtigkeitskontrolle in mittelgrossen Gewerberäumen und zur Trocknung von feuchten Kellerzonen und Archivräumen sowie mittelgrossen Schwimmhallen.Mit seiner Entfeuchtungsfähigkeit von bis zu 80 Litern pro Tag (bei 30 °C und 80 % relativer Luftfeuchtigkeit) hält er die Luftfeuchtigkeit präzise unter Kontrolle. Das beugt effektiv der Bildung von Schimmel vor und schützt so Ihre Räumlichkeiten und Materialien. Merkmale und VorteileDieses wandmontierte Gerät überzeugt nicht nur durch seine robuste Bauweise und sein benutzerfreundliches Design: Langlebigkeit: Das Aluminiumgehäuse und die kataphoretisch beschichteten Wärmetauscher bieten eine hohe Korrosionsbeständigkeit, was u.a. auch den Einsatz in Schwimmhallen ermöglicht. Präzise Feuchtigkeitsregelung: Ein elektronischer Hygrostat regelt die Luftfeuchtigkeit automatisch auf den gewünschten Wert. Benutzerfreundlichkeit: Das intuitive Bedienfeld und die einfache Installation machen die Handhabung des DH 65 unkompliziert. Praktischer Wasserablauf: Der direkte Wasserablauf erspart das Entleeren eines Tanks. Das entzogene Kondensat wird über einen fallend installierten Schlauch in einen nahen Abfluss geleitet. Wandmontage: Das Modernes Design: Das unauffällige und moderne Design fügt sich nahtlos in jede Umgebung ein. Technische Daten Spezifikation Wert Betriebstemperaturbereich 5 - 40 °C Betriebsfeuchtigkeitsbereich 40 - 80 % Luftdurchsatz 800 m³/h Schalldruckpegel (in 1 m Abstand) 48 dB(A) Entfeuchtungsleistung (30°C/80% r.F.) 80 L/24h Entfeuchtungsleistung (20°C/60% r.F.) 31.9 L/24h Verbrauch (30°C/60% r.F.) 0.57 kWh/L Verbrauch (20°C/60% r.F.) 0.65 kWh/L Gasgewicht R290C/CO₂-Äquivalent 0.85 kg / 0.126 t Stromspannung 230 V / 1 Ph / 50 Hz Stromverbrauch (max.) 1.2 kW Nennstromstärke (max.) 5.3 A Masse (B x T x H) 1306 x 265 x 720 mm Gewicht 76 kg Garantie 2 Jahre
Fr. 4'816.00
TROTEC Trotec Tripod Universal Stand
This universal device tripod features a stable central brace with locking for secure standing and comes with a robust 3-way head including a quick-release plate with a standard 1/4" connection for optimal alignment of measuring devices or cameras. The head can be tilted up to 90 degrees to the side, allowing for portrait shots or angled planes. Non-slip and flexible rubber feet help the user adjust to different ground conditions. A quick-release clamp ensures fast and uncomplicated setup. With the panorama ball head, almost any setting is possible when it comes to stable camera positioning or precise measurements. By extending the telescopic rods, you can achieve a comfortable working height of up to 150 cm. If necessary, the quick-release plate can be detached with a single hand movement when the situation requires it. Trotec Article No. 6.300.000.200
Fr. 19.50
TROTEC Trotec End Fittings 38mm, Aluminum Bitumen
Trotec Article No. 6.100.009.054
Fr. 69.00
TROTEC Trotec end fittings, PVC for 38mm hose (pack of 10)
"With these fittings, the air hoses are fixed in drill holes of floor slabs during the drying of water damage." • PVC, yellow• for 50 to 52 mm core hole drilling• suitable for air hoses with a 38mm inner diameter 1 piece = 10 pack Trotec Article No. 6.100.009.044
Fr. 29.00
TROTEC Trotec Energy Cost Measuring Device BX09
Swiss version, suitable for three-pole 230V household sockets. Quick and easy measurement of energy consumption "Which electrical device in the office or household consumes how much energy?" With a minimal possible power display of 0.1 W, this measuring device can track even the smallest energy wasters. This also allows for the detection of standby consumption in devices, meaning any potential consumption when turned off. The application is incredibly simple: Plug the measuring device into the socket and connect the electrical consumer to be checked. You will immediately see its current energy consumption, optionally displayed as active power in watts, kWh, price, or costs per kWh. Check your electrical devices using this measuring device, such as TV and HiFi systems, LCD televisions, amplifiers, DVD players, video recorders, computers, servers, refrigerators, freezers, washing machines, dryers, air conditioners, heaters, floor lamps, standing lamps, background and display lighting, machines, etc.. Advantages at a Glance • Quick and easy measurement of energy requirements• Power consumption display in watts, kWh, or costs• Optimal price-performance ratio • Minimal possible power display 0.1 W • Puffer capacitor for storing the selected settings • Display of standby consumption starting from 0.1 W - this is not possible with many competing products. • Display of the current power consumption of one or more devices • Display of the costs of the consumed energy within a specific period (electricity price must be recorded once)• Connection of a multiple socket with several devices possible• Easily readable and easy to understand LCD display • Power failure protected• Swiss version - no conversion or adapter required Technical data Measuring range Total power consumption momentary current consumption 0.1 - 9999 kWh 0.1 - 2300 Watt (max. 10A) accuracy ± 2 % voltage / frequency 230V / 50-60 Hz (= household socket) Advertisement LCD memory yes, recording capacity 9999.9 hours. Messkreis category CAT II (2500V) Conformity / Safety EN 61010-1, EN 61326-1, Pollution Degree 2 Protection class IP20 Ambient temperature 5 - 40 °C ambient humidity max. 85 % r.F. Dimensions (H x W x D) 95 x 51 x 70 mm Weight 100 g Trotec article no. 3510205916 guarantee 2 years
Fr. 19.90
TROTEC Trotec Descaler 1000ml
environmentally conscious The Trotec liquid descaler consists of organic acids that can be 100% biologically decomposed. active ingredient indicator The striking pink color of the descaler is used to check the active ingredient. As soon as the color fades and starts to turn yellow, the liquid loses its descaling power. Energy-saving "A calcification causes electronic devices to require up to 30% more power to deliver the same performance as a non-calcified device. Therefore, clean your devices regularly to save energy. The Trotec liquid descaler helps you with that!" quality product The 100% biodegradable liquid descaler from Trotec is a quality product 'Made in Germany'. It is made on an amidosulfonic acid basis and contains maleic acid to prevent re-scaling. Universal descaler for household appliances The descaler with color indicator is suitable not only for cleaning the coffee machine/fully automatic coffee machine, but also for all other household appliances with a water tank, such as air conditioners, humidifiers, kettles, or steam irons. Data • Quality product, made in Germany• Naturally and Environmentally Friendly - 100% biodegradable• Content: 1000 ml• Safety lock/Child safety lock• Universally applicable: coffee machine, fully automatic coffee machine, espresso machine, air conditioning units, humidifiers, etc.• Suitable for devices from all appliance manufacturers• Mixing ratio: 0.5 liters of descaler for a 30-liter humidifier water tank. "For further information, please refer to the descaling instructions of your device manufacturer."
Fr. 11.50
TROTEC Trotec Coloring Agent PureRubin 200 g
This color powder is visually recognizable without technical aids and is ideally suited for direct gradient or connection control in the detection of faulty or leaky connections and incorrect discharges from drainage systems. The productive marking dye can be mixed in water as a color solution in any desired color intensity, as the pure powder mixtures are completely free from dosage limits due to their extreme environmental compatibility. Further applications lie in tracer hydrology, for example for flow path verification, for visualizing the mixing and flow behavior in flowing waters, lakes, reservoirs, or water treatment plants, as well as for monitoring flow rates and flow velocities in fish ladders. "The Pure dye is also an ideal tool for simulated hazardous material visualizations during GSG exercises of the fire department.""Individually adjustable for every need" "Due to their 100% natural food-grade ingredients, the colorants of the Pure series can be dosed as desired - an overdose is not possible.""Depending on the desired intensity, 2 g of pure dye can be added per 1 to 5 liters of water, thus producing a pure dose of between 100 and 500 liters of color solution." Advantages at a Glance • 100% natural, food grade• hypoallergenic, vegan, kosher and halal• 100% biodegradable• Safe for humans and animals• No impairment of water quality• No maximum dosage limits• Water-soluble powder - easy handling composition Radish, apple, black currant, citric acid, and maltodextrin Technical data Masse (L x B x H) 70 x 70 x 165 mm Contents 200 g ingredients Radish, apple and black currant, citric acid and maltodextrin scope of delivery 1 Dose Trotec article no. 3.510.012.051
Fr. 42.00
TROTEC Trotec Moisture Meter BM22
This moisture meter is equipped with robust steel measuring pins that ensure a reliable connection to the test material, thus providing precise measurement results for wood moisture measurement of cut and firewood, as well as for material moisture measurement of soft building materials such as gypsum or plaster. The reading of the moisture values is facilitated by a clear bar scale and the additional direct display of the moisture volume in absolute percentage figures. Two separate scale ranges for wood and building materials increase measurement accuracy. "For wood moisture measurement, a calibration curve is stored in the device, corresponding to the average of the relevant wood species in Europe at a wood temperature of 20 °C. This means that no further settings are required for a quick determination of the wood moisture content." A switch between wood moisture and construction moisture mode is not necessary, as the measurement values can be read on two parallel displayed scale ranges for the respective material. To check the battery status and device function, a reference adapter is integrated into the protective cap of the device. The measuring pins can be easily unscrewed and replaced if necessary. Advantages for Practice • Wood moisture and material moisture measurement with a device• Double scale for wood moisture and material moisture• Including protective cap with integrated test function• Ready to use• Display of ambient temperature optionally in °C and °F• Calibration curves for common wood types• With LED moisture indicator• Integrated LED flashlight• Easily replaceable puncture steel measuring pins• Direct measurement display in %• Automatic function and battery test• Practical pocket clip• Auto shut-off• Practice-oriented German industrial design - protected design pattern Scope of deliveryMeasuring device, operating manual Technical data Mess principle: Resistance methodElectrode length: approx. 8 mmElectrodes: integrated, replaceablePermissible ambient conditions: 0 to +40 °C / 0 to 85 % r.H.Power supply: 4 x 1.5 V AAADimensions (L x W x H): 155 x 34 x 52 mmWeight: 135 g Wood moisture Measuring range: 6 to 44 %Accuracy: Building moisture Measuring range: approx. 0.2 to 2.0 %Accuracy: Temperature Measuring range: 0 to 40 °C / 32 - 104 °FAccuracy: not specified Trotec Article No. 3510205025
Fr. 29.00
TROTEC Trotec Filter mat for water separator WA4i (pack of 5)
The use of a filter mat significantly increases the reliability and lifespan of the water separator WA4i. The mat is simply placed at the bottom of the separator and provides additional protection for the pump against dirt particles. Scope of delivery: 5 pieces Trotec Article No. 7.160.000.205
Fr. 37.00