Laundry Hangers Single Elements
Aircenter Clothesline roll 10 m white
The clotheslines consist of a robust wire core with a white, UV-resistant plastic coating. Compared to commercially available nylon clotheslines, these wire core lines can be tensioned significantly tighter, so that even when loaded with a lot of laundry, they sag only slightly. Additionally, these lines warp very little over time. The clotheslines are equipped on one side with a loop, which can be hooked onto the first sliding pulley of the clothesline system. The other side has no loop, so that the end can be guided into a rope tensioner from where tension can be applied over the entire length of the line from that point. Characteristics• PVC coated steel wire strand• white, UV-stabilized• Nominal strength 1400 N/mm²• Lengths: 10 / 20 / 30 / 40 / 50 / 70 / 100 / 200m• Total diameter 4mm• Made in Switzerland
Fr. 12.00 - Fr. 170.00
Aircenter Chrome cable tensioner
Chromed TensionerThis chrome-plated rope tensioner for clotheslines fits the sliding rollers of the types Dryfix, Aerial, Krüger, or Roth-Kippe. It is clicked over the last sliding roller, and the end of the rope is inserted into the hole. With the lever, a strong pull can now be easily applied across the entire line system. The bracket is then folded over the line, thereby maintaining the tension.Made in Switzerland. Technical dataMade in Switzerland
Fr. 6.00
Krüger Connection rail Krüger 75 cm
Connection rails Krüger MetalThe Krüger rails for laundry line systems are made of very sturdy, galvanized metal, are available in five lengths, and are suitable both for wall-to-wall systems and when you mount the rails on ceiling or wall brackets. "They fit Gleitrollen and carriers from Dryfix, Krüger, and Lübra, so they can be freely combined."The rails are all perforated every 2.5 cm.Prices (without sliding rollers), number of lanes with a recommended 15 cm distance between the lines:0.75 m (6 linen rolls) Fr. 49.551.15 m (8 linen paths) Fr. 62.451.45 m (10 linen paths) Fr. 76.451.90 m (13 linen strips) Fr. 91.552.20 m (15 linen rolls) Fr. 113.10Rail thickness: 4mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.Connection rails over 1m are shipped exclusively by courier, costs depending on weight Fr. 14.- to 18.- Technical data Dimensions (H / T): 4cm / 3cmThickness: 4 mm Width:0.75m1.15m1.45m1.90m2.20m Weight: 1622g 2462g 3029g 3937g 4649g
Fr. 51.00
Krüger Ceiling telescopes Krüger 230-330 mm
Ceiling telescopes for ceiling-mounted laundry line systemsWith the ceiling telescopes, you can hang the connecting rails of your laundry line system down to the appropriate height from the ceiling. The connection rails Dryfix and Krüger fit these carriers.The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load-bearing capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the mass ranges described below, with the height not being changeable after installation:Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. "You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2."Please note that mounting directly onto the concrete ceiling provides the best stability. "If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts again." When mounting on the insulation, it can break due to the strong cable pull.It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.How many ceiling mounts are needed?Due to the strong cable pull, we recommend you the2 pieces up to 1.50m rail width (per connecting rail)for longer rails 3 pieces (per connecting rail) Shipping costs for 2 pcs.: Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart.) Technical data Size230mm-330mm400mm-600mm550mm-750mm750mm-1050mm Weight 683 gr. 1100 gr. 1450 gr. 3121 gr.
Fr. 40.00
Krüger Wall console Krüger 9 cm
Wall consoles Krüger (spacers) for connection railszinc-coated, rust-free, for easy bridging of pipes or electrical lines on walls. Available in 3 different lengths.For rails up to 1.50m, 2 pieces per connection rail are sufficient; above that, 3 brackets are recommended for optimal stability. "If you use wall consoles or ceiling telescopes, only metal connection rails are recommended due to the strong tension of the cable (Dryfix Metal, Dryfix Vario, or Krüger), no aluminum rails." These consoles fit all our metal rails.Lot:Total length = From wall to end of consoleBridging = Clearance between the wall and the back of the connection rail (according to photo 2)Bridging free space 9 cm (e.g. when mounting over pipes). Total length from wall 14 cm.Bridging 22 cm (e.g. when mounted over conduit pipes). Total length from wall 27 cm.Bridging 36 cm (e.g. when mounted over conduit pipes). Total length from wall 41 cm. Technical data versions:14 cm (for 9 cm distance, Krüger item no. 302.512), weight 552g.27 cm (for 22 cm distance, Krüger item no. 302.514), weight 872 g.41 cm (for 36 cm distance, Krüger item no. 302.515), weight 1228 g. Material thickness: 0.8 cmDimensions base: 10 x 4 cm
Fr. 21.00 - Fr. 32.00
Krüger Wall console for Junior leash Krüger
Wall console made of galvanized steel as a single element of the Juniorline systems. Juniorlines are practical additional laundry hangers that offer space-saving drying options for T-shirts, underwear, socks, etc. along free walls. They are particularly practical when installed at hip height. Often, two systems are also mounted one above the other, one at height and one at a practical working height. One system provides space for 3 lines."These brackets are suitable when the entire length between two walls cannot be used for hanging laundry. If they can be stretched directly from wall to wall, the corner brackets are more advantageous (listed below on this page as accessories). Wall and corner brackets are compatible in terms of hole spacing."Compatible with Dryfix or Krüger sliding rollers.Suitable for Dryfix+Krüger sliding rollers as well as chrome-plated cable tensioners Technical data Material: galvanized steelRagt approx. 27cm into the roomWidth wall base 13cm3 holes for sliding rollers, distance 8cm each For a complete junior leash system, you need• 2 brackets (depending on the room 2 x wall brackets or 2 x corner brackets or 1 x wall + 1 x corner bracket)• 6 castors• Clotheslines (Calculation of rope length = 3 x desired system width + 1 x 16cm)• 1 rope tensioner You will find these items under Accessories at the bottom of this page.
Fr. 28.00
Krüger Corner bracket for junior line
Bracket made of galvanized steel as a single element of the Juniorline systems. Juniorlines are practical additional laundry hangers that offer space-saving drying options for T-shirts, underwear, socks, etc. along free walls. They are particularly practical when installed at hip height. Often, two systems are also mounted one above the other, one at height and one at a practical working height. One system provides space for 3 lines.These consoles are suitable when the system can be stretched directly from one wall to the opposite one. If this is not possible, please also consider the Juniorline wall consoles, which can be mounted either on one side or on both sides along the same wall. Angle and wall consoles are compatible in terms of hole spacing.dimensions and perforationsTotal width 18 cm, height 3 cm, depth 4.5 cmWall side 2 holes for wall mountingPlatform for 3 sliding rollers at a distance of 8 cmFor a complete junior leash system, you need• 2 consoles (depending on the room 2 x corner or 2 x wall consoles or 1 x corner + 1 x wall console)• 6 castors• Clotheslines (Calculation of rope length = 3 x desired system width + 1 x 16cm)• 1 rope tensioner You will find these items under Accessories at the bottom of this page.
Fr. 21.00
Lübra Wall / Ceiling Console Lübra without Insert / 40 cm
Wall console / ceiling support 40 cm made of robust, hot-dip galvanized steel. For mounting laundry line systems on ceilings or for bridging pipes and conduits on walls. Optional with adjustable extension insert, for a maximum extension of 30 cm of the base console. Technical data Weight: 2.3kg
Fr. 43.00
Fr. 67.00
Dryfix Connection rail Dryfix Vario 0.78m
Connection rails Dryfix Vario MetalThe Dryfix connection rails made of very sturdy, galvanized metal are available in various lengths and are suitable both for wall-to-wall systems and when you mount the rails on ceiling or wall supports. The glide rollers are already fully assembled at the recommended distance of 15cm.Available rail widths:Rail width 0.78 m perforation every 15 cmfor: 6 lanesRail width 1.08 m perforation every 15 cmfor: 8 lanesRail width 1.23 m perforation every 15 cmfor: 9 lanesRail width 1.53 m perforation every 15 cmfor: 11 lanes/15cmRail width 1.83 m perforation every 15 cmfor: 13 lanesRail width 2.28 m perforation every 15 cmfor: 16 lanesRail thickness: 4mm-> Also note our complete setsFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels. Technical data Dimensions (Depth / Height): 3.4cm / 3cmThickness: 4 mm Width:0.78m1.53m2.28m Weight: 1.39 kg 2.76 kg 4.10 kg
Fr. 49.00 - Fr. 116.00
Dryfix Wall console Dryfix 10 cm (Bridging 5 cm)
Wall consoles Dryfix (spacers) for connection rails zinc-coated, rust-free, for easy bridging of pipes or electrical lines on walls. Available in 3 different lengths. For rails up to 1.50m, 2 pieces per connection rail are sufficient; above that, 3 brackets are recommended for optimal stability. "If you use wall consoles or ceiling telescopes, only metal connection rails are recommended due to the strong tension of the cable (Dryfix Metal, Dryfix Vario, or Krüger), no aluminum rails. These consoles fit all of our metal rails." Total length 10 cm = Bridging 5 cm)Total length 20 cm = Bridging 15 cm)Total length = From wall to front console Bridging = Free space between the wall and the back of the connection rail, valid for Dryfix metal and Krüger rails. Dryfix Vario metal rails are slightly narrower, so the bridging is +1cm more each time, thus 6/16/26 cm. Technical Data Console Length / Weight:10 cm / 465 gr.20 cm / 715 gr.
Fr. 17.00 - Fr. 19.00
Dryfix Sliding rollers, black, with aluminum angle
The aluminum glide roller angles are suitable wherever only a few lines can fit, where lines can hardly be bridged over the wall, or for the expansion of existing laundry line systems. For direct wall mounting without a rail, according to the illustration.Complete with:- Aluminum shop- sliding roller- suitable screw for fixation on angle- Lock nut(Wall screw not included) Available colors of the sliding rollers: black, blue, yellow Technical dataWeight: 0.03kgAngle: Aluminum, Height 2cm, Depth 3cm, Width 2cm, Material thickness 2.5mm Rolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cm Screws: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm
Fr. 6.50
Dryfix Sliding rollers, yellow, with aluminum angle
The aluminum glide roller angles are suitable wherever only a few lines can fit, where lines can hardly be bridged over the wall, or for the expansion of existing laundry line systems. For direct wall mounting without a rail, according to the illustration.Complete with:- Aluminum shop- sliding roller- suitable screw for fixation on angle- Lock nut(Wall screw not included)Available colors of the sliding rollers: black, blue, yellow Technical dataWeight: 0.03kgAngle: Aluminum, Height 2cm, Depth 3cm, Width 2cm, Material thickness 2.5mmRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm
Fr. 6.50
Dryfix Sliding rollers, blue, with aluminum angle
The aluminum glide roller angles are suitable wherever only a few lines can fit, where lines can hardly be bridged over the wall, or for the expansion of existing laundry line systems. For direct wall mounting without a rail, according to the illustration.Complete with:- Aluminum shop- sliding roller- suitable screw for fixation on angle- Lock nut(Wall screw not included)Available colors of the sliding rollers: black, blue, yellow Technical dataWeight: 0.03kgAngle: Aluminum, Height 2cm, Depth 3cm, Width 2cm, Material thickness 2.5mmRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm
Fr. 6.50
Dryfix Ceiling telescopes Dryfix 230-330 mm
Ceiling telescopes for ceiling-mounted laundry line systems "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports." The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00 Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2. Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables. It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines. How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).
Fr. 34.00
Dryfix Ceiling telescopes Dryfix 400-600 mm
Ceiling telescopes for ceiling-mounted laundry line systems "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports." The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00 Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2. Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables. It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines. How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).
Fr. 36.00
Dryfix Ceiling telescopes Dryfix 550-800 mm
Ceiling telescopes for ceiling-mounted laundry line systems "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports." The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00 Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2. Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables. It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines. How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).
Fr. 39.00
Dryfix Ceiling telescopes Dryfix 750-1050 mm
Ceiling telescopes for ceiling-mounted laundry line systems "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports." The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00 Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2. Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables. It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines. How many ceiling mounts are needed?Due to the strong cable pull, we recommend the 2 pieces up to 1.50 m rail width (per connecting rail) for longer rails 3 pieces (per connecting rail).
Fr. 58.00
Dryfix black castors
Gliding rollers for laundry line system (available individually)Consisting of a sliding roller made of durable plastic, screw, nut. For self-assembly on connection rails. Suitable for laundry line connecting rails from Dryfix and Krüger SunLine. Available in the colors black, yellow, blue. Technical dataRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cm Screws: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm
Fr. 2.00
Dryfix Wall console 60 cm perforated
Wall console made of galvanized steel (rustproof), with stabilization support. Length 63 cm, 5-fold drilled for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 59 cm from the wall (depending on the chosen clothesline system)."ceiling telescopeIf the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 60cm and cannot be changed. With a ceiling height of 2.45 m, this results in exactly the standard height of the laundry lines of 1.85 m.As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 5 tracks, for example for bed linen, etc. Please also refer to our junior line complete sets.Technical data Material: galvanized metal, rustproofBase dimensions: 18 x 18 cm, 4-fold drilled (10 mm diameter)Length from wall total: 63 cmDistance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.
Fr. 59.00
Dryfix Connection rail Dryfix Alu 0.95m
Dryfix Alu connection rails for clotheslines The Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers):0.95 m (for 7 line lanes) Fr. 28.00 / each.1.10 m (for 8 line lanes) Fr. 32.00 / pc.Rail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also check out our complete sets Dryfix Alu connection rails for clotheslinesThe Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers): Rail widths:0.95 m for 7 line lanes1.10 m for 8 lane tracksRail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also note our complete sets Technical data Dimensions (H/D): 3cm/3cm Strength: 3mm Width: Weight: 0.95m 512g
Fr. 28.00
Dryfix spacer rollers 3 cm
Distance rollers 3cm for bridging cables or lines. For mounting between wall and laundry line connection rails. Made of solid robust plastic, compatible with all connection rails from our program. Technical dataLength: 30 mmOuter diameter: 25 mmDiameter hole: 10 mmMaterial / Color: robust plastic, anthraciteWeight: 21 gr
Fr. 4.00
Dryfix Wall console 100 cm perforated
Wall console made of galvanized steel (rust-free), with stabilization support. Length 100 cm, 8-fold perforated for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 96 cm from the wall (depending on the chosen clothesline system)."ceiling telescope'If the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 100cm and cannot be changed. With a ceiling height of 2.85 m, this results in exactly the standard height of the laundry lines of 1.85 m.'As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 8 tracks, for example, for bed linen, etc. Please also refer to our junior line complete sets.Technical data Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.
Fr. 79.00
Aircenter Galvanized tensioner, size 2
Galvanized tensioner (Size 2)fits Dryfix, Aerial and Krügerschienenzinc-coated, rust-free. Can be mounted on the support rail with screws. Technical dataWeight: 0.04kg
Fr. 6.00
