Suitable for a variety of larger dehumidifiers. The 48cm version fits, for example, our dehumidifiers Quadro Q40, Flipperdry F300, Optimo80, E33, Oasis, and Woods. The side supports and 5mm raised edges at the bottom prevent the dehumidifier from rolling away.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate.scope of delivery- Wall bracket made of powder-coated white steel sheet- 2 screws/anchors for wall mounting  Data Internal dimensions (Height x Width x Depth): 26 x 48 x 39 cmWeight: 2kgLoad capacity: max. 23 kg Lochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mm

Learn more More Fewer

Wall console, suitable for a variety of smaller dehumidifiers from our range, for example to:Dryfix Royal, Foxy F12 + X3, Airsec3000, Lübra LDH626L + WDH101pro, Akto930, WDH-416S/725DG, Optimo20 etc.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate. execution40.5 cm inner width / 41.5 cm outer widthSteel sheet white powder-coated or light gray powder-coated Scope of delivery:- Wall mount made of sheet steel- 2 screws/anchors for wall mounting   Technical data Dimensions (Height x Width x Depth): 25 x 41.5 x 30 cmWeight: 1.5kgLochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mmload capacity up to 16 kgLarger versionfor larger or heavier dehumidifiers, please also refer to our bracket for large devices.

Learn more More Fewer

Rack for dehumidifiers and mobile air conditioning units. The rack is ideally suited for:• if a larger bucket is to be placed under a dehumidifier, e.g. during a longer absence on vacation, or • for the increase of mobile air conditioning units with a hose, when the air hose is not long enough to reach a window for venting the warm air.The rack is made of metal pipes (powder-coated white), has a stable stand even when loaded, and sufficient load capacity for dehumidifiers weighing up to 50 kg. The two support plates are bent upwards at the sides, so that the device cannot roll away. The open space in the middle has a width of approximately 17.5 cm and can be used for the passage of a hose. Accordingly, the rack can be used for all devices that have a minimum distance of 17.5 cm between the wheels. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Fits all mobile air conditioning units from our range except for "PAC 3900 X", "Orion Plus" and "70m3".     Technical data   Height (Top Edge of Carrying Handle): 56 cmHeight of the stand platform: 50 cmWidth outside: 47 cmWidth of the stand platform (=max. device width): 45 cmDepth: 38 cmWeight: 5kg

Learn more More Fewer

Exclusively with us!The X-Tank Basic is an additional bucket for wall-mounted dryers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow. The X-Tank Basic can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the flat rack with scale, including power cable and matching 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.The X-Tank was developed by us (Patent CH709716) and is exclusively available from us.    scope of delivery plug-and-play device including matching 20-liter bucket   Technical data Mass HxWxD: 180 x 480 x 390 mm (Dimensions without bucket) Weight: 7 kg Material: Metal white powder-coated connection cable: 2m with 3-pole Swiss plug (fits into standard household socket) Guarantee: 2 years

Learn more More Fewer

Exclusively with us!The X-Tank Top is an additional bucket for mobile dehumidifiers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow.The X-Tank top can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the stand rack with scale, including power cable and a suitable 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand.4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Scope of delivery: ready-to-use device including matching 20-liter bucketThe X-Tank was developed by us and is exclusively available from us.   warranty 2 yearsCustomer opinions on the X-Tank:"...The X-Tank with hose arrived yesterday, the installation was problem-free. We are very satisfied..." Technical dataheight 56 cmWidth 48 cm, max. device width 44.5 cmdepth 39 cmWeight 8 kgLoad capacity max. 40 kgConnection cable 2m with Swiss plug (220V/standard household socket) 

Learn more More Fewer

Dryfix Alu connection rails for clotheslines The Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers):0.95 m (for 7 line lanes) Fr. 28.00 / each.1.10 m (for 8 line lanes) Fr. 32.00 / pc.Rail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also check out our complete sets   Dryfix Alu connection rails for clotheslinesThe Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers): Rail widths:0.95 m for 7 line lanes1.10 m for 8 lane tracksRail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also note our complete sets    Technical data   Dimensions (H/D): 3cm/3cm Strength: 3mm     Width: Weight: 0.95m   512g  

Learn more More Fewer

Wall console made of galvanized steel (rustproof), with stabilization support. Length 63 cm, 5-fold drilled for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 59 cm from the wall (depending on the chosen clothesline system)."ceiling telescopeIf the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 60cm and cannot be changed. With a ceiling height of 2.45 m, this results in exactly the standard height of the laundry lines of 1.85 m.As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 5 tracks, for example for bed linen, etc. Please also refer to our junior line complete sets.Technical data Material: galvanized metal, rustproofBase dimensions: 18 x 18 cm, 4-fold drilled (10 mm diameter)Length from wall total: 63 cmDistance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Connection rails Dryfix Vario MetalThe Dryfix connection rails made of very sturdy, galvanized metal are available in various lengths and are suitable both for wall-to-wall systems and when you mount the rails on ceiling or wall supports. The glide rollers are already fully assembled at the recommended distance of 15cm.Available rail widths:Rail width 0.78 m perforation every 15 cmfor: 6 lanesRail width 1.08 m perforation every 15 cmfor: 8 lanesRail width 1.23 m perforation every 15 cmfor: 9 lanesRail width 1.53 m perforation every 15 cmfor: 11 lanes/15cmRail width 1.83 m perforation every 15 cmfor: 13 lanesRail width 2.28 m perforation every 15 cmfor: 16 lanesRail thickness: 4mm-> Also note our complete setsFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels. Technical data  Dimensions (Depth / Height): 3.4cm / 3cmThickness: 4 mm   Width:0.78m1.53m2.28m   Weight: 1.39 kg 2.76 kg 4.10 kg

Learn more More Fewer

Gliding rollers for laundry line system (available individually)Consisting of a sliding roller made of durable plastic, screw, nut.For self-assembly on connection rails.Suitable for laundry line connecting rails from Dryfix and Krüger SunLine. Available in the colors black, yellow, blue. Technical dataRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm 

Learn more More Fewer

Wall console made of galvanized steel (rust-free), with stabilization support. Length 100 cm, 8-fold perforated for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 96 cm from the wall (depending on the chosen clothesline system)."ceiling telescope'If the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 100cm and cannot be changed. With a ceiling height of 2.85 m, this results in exactly the standard height of the laundry lines of 1.85 m.'As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 8 tracks, for example, for bed linen, etc. Please also refer to our junior line complete sets.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer