Suitable for a variety of larger dehumidifiers. The 48cm version fits, for example, our dehumidifiers Quadro Q40, Flipperdry F300, Optimo80, E33, Oasis, and Woods. The side supports and 5mm raised edges at the bottom prevent the dehumidifier from rolling away.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate.scope of delivery- Wall bracket made of powder-coated white steel sheet- 2 screws/anchors for wall mounting  Data Internal dimensions (Height x Width x Depth): 26 x 48 x 39 cmWeight: 2kgLoad capacity: max. 23 kg Lochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mm

Learn more More Fewer

Wall console, suitable for a variety of smaller dehumidifiers from our range, for example to:Dryfix Royal, Foxy F12 + X3, Airsec3000, Lübra LDH626L + WDH101pro, Akto930, WDH-416S/725DG, Optimo20 etc.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate. execution40.5 cm inner width / 41.5 cm outer widthSteel sheet white powder-coated or light gray powder-coated Scope of delivery:- Wall mount made of sheet steel- 2 screws/anchors for wall mounting   Technical data Dimensions (Height x Width x Depth): 25 x 41.5 x 30 cmWeight: 1.5kgLochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mmload capacity up to 16 kgLarger versionfor larger or heavier dehumidifiers, please also refer to our bracket for large devices.

Learn more More Fewer

Rack for dehumidifiers and mobile air conditioning units. The rack is ideally suited for:• if a larger bucket is to be placed under a dehumidifier, e.g. during a longer absence on vacation, or • for the increase of mobile air conditioning units with a hose, when the air hose is not long enough to reach a window for venting the warm air.The rack is made of metal pipes (powder-coated white), has a stable stand even when loaded, and sufficient load capacity for dehumidifiers weighing up to 50 kg. The two support plates are bent upwards at the sides, so that the device cannot roll away. The open space in the middle has a width of approximately 17.5 cm and can be used for the passage of a hose. Accordingly, the rack can be used for all devices that have a minimum distance of 17.5 cm between the wheels. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Fits all mobile air conditioning units from our range except for "PAC 3900 X", "Orion Plus" and "70m3".     Technical data   Height (Top Edge of Carrying Handle): 56 cmHeight of the stand platform: 50 cmWidth outside: 47 cmWidth of the stand platform (=max. device width): 45 cmDepth: 38 cmWeight: 5kg

Learn more More Fewer

Exclusively with us!The X-Tank Basic is an additional bucket for wall-mounted dryers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow. The X-Tank Basic can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the flat rack with scale, including power cable and matching 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.The X-Tank was developed by us (Patent CH709716) and is exclusively available from us.    scope of delivery plug-and-play device including matching 20-liter bucket   Technical data Mass HxWxD: 180 x 480 x 390 mm (Dimensions without bucket) Weight: 7 kg Material: Metal white powder-coated connection cable: 2m with 3-pole Swiss plug (fits into standard household socket) Guarantee: 2 years

Learn more More Fewer

Exclusively with us!The X-Tank Top is an additional bucket for mobile dehumidifiers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow.The X-Tank top can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the stand rack with scale, including power cable and a suitable 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand.4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Scope of delivery: ready-to-use device including matching 20-liter bucketThe X-Tank was developed by us and is exclusively available from us.   warranty 2 yearsCustomer opinions on the X-Tank:"...The X-Tank with hose arrived yesterday, the installation was problem-free. We are very satisfied..." Technical dataheight 56 cmWidth 48 cm, max. device width 44.5 cmdepth 39 cmWeight 8 kgLoad capacity max. 40 kgConnection cable 2m with Swiss plug (220V/standard household socket) 

Learn more More Fewer

Dryfix Alu connection rails for clotheslines The Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers):0.95 m (for 7 line lanes) Fr. 28.00 / each.1.10 m (for 8 line lanes) Fr. 32.00 / pc.Rail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also check out our complete sets   Dryfix Alu connection rails for clotheslinesThe Dryfix connection rails made of solid, well-crafted aluminum are suitable wherever the clotheslines can be stretched from wall to wall. For this application, they are equivalent in stability to the more expensive metal versions (if you need/want to mount the rails with ceiling or wall brackets, we recommend the metal rails such as Dryfix Vario, Dryfix Metal, or Krüger due to the strong tension of the rope).The rails are all perforated every 15 cm and can be combined with sliding rollers from the systems Dryfix, Aerial, Roth-Kippe, Lübra, or Krüger.Prices (without sliding rollers): Rail widths:0.95 m for 7 line lanes1.10 m for 8 lane tracksRail thickness: 3mmFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels.-> Also note our complete sets    Technical data   Dimensions (H/D): 3cm/3cm Strength: 3mm     Width: Weight: 0.95m   512g  

Learn more More Fewer

Wall console made of galvanized steel (rustproof), with stabilization support. Length 63 cm, 5-fold drilled for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 59 cm from the wall (depending on the chosen clothesline system)."ceiling telescopeIf the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 60cm and cannot be changed. With a ceiling height of 2.45 m, this results in exactly the standard height of the laundry lines of 1.85 m.As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 5 tracks, for example for bed linen, etc. Please also refer to our junior line complete sets.Technical data Material: galvanized metal, rustproofBase dimensions: 18 x 18 cm, 4-fold drilled (10 mm diameter)Length from wall total: 63 cmDistance of holes from wall: 10 / 22.5 / 35 / 47.5 / 60 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Connection rails Dryfix Vario MetalThe Dryfix connection rails made of very sturdy, galvanized metal are available in various lengths and are suitable both for wall-to-wall systems and when you mount the rails on ceiling or wall supports. The glide rollers are already fully assembled at the recommended distance of 15cm.Available rail widths:Rail width 0.78 m perforation every 15 cmfor: 6 lanesRail width 1.08 m perforation every 15 cmfor: 8 lanesRail width 1.23 m perforation every 15 cmfor: 9 lanesRail width 1.53 m perforation every 15 cmfor: 11 lanes/15cmRail width 1.83 m perforation every 15 cmfor: 13 lanesRail width 2.28 m perforation every 15 cmfor: 16 lanesRail thickness: 4mm-> Also note our complete setsFor a complete wall-to-wall system, you need:2 connection rails, 1 rope (length: room length x number of lanes + 1 x rail width), 1 rope tensioner, sliding rollers (number of lanes x 2), screws, dowels. Technical data  Dimensions (Depth / Height): 3.4cm / 3cmThickness: 4 mm   Width:0.78m1.53m2.28m   Weight: 1.39 kg 2.76 kg 4.10 kg

Learn more More Fewer

Wall consoles Dryfix (spacers) for connection rails zinc-coated, rust-free, for easy bridging of pipes or electrical lines on walls. Available in 3 different lengths. For rails up to 1.50m, 2 pieces per connection rail are sufficient; above that, 3 brackets are recommended for optimal stability. "If you use wall consoles or ceiling telescopes, only metal connection rails are recommended due to the strong tension of the cable (Dryfix Metal, Dryfix Vario, or Krüger), no aluminum rails. These consoles fit all of our metal rails." Total length 10 cm = Bridging 5 cm)Total length 20 cm = Bridging 15 cm)Total length = From wall to front console Bridging = Free space between the wall and the back of the connection rail, valid for Dryfix metal and Krüger rails. Dryfix Vario metal rails are slightly narrower, so the bridging is +1cm more each time, thus 6/16/26 cm. Technical Data Console Length / Weight:10 cm / 465 gr.20 cm / 715 gr.

Learn more More Fewer

Sliding rollers for laundry line system (available individually)Consisting of a sliding roller made of durable plastic, screw, nut.For self-assembly on connection rails.Suitable for laundry line connecting rails from Dryfix and Krüger SunLine. Available in the colors black, yellow, blue. Technical dataRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm 

Learn more More Fewer

Wall console made of galvanized steel (rust-free), with stabilization support. Length 100 cm, 8-fold perforated for example for the attachment of sliding rollers. This console is versatile:Wall distance holder for clothesline rails"If thick pipes or air ducts make it impossible to mount the connection rail directly to the wall, this console can bridge a distance of 96 cm from the wall (depending on the chosen clothesline system)."ceiling telescope'If the laundry line system is to be mounted on one side or both sides to the ceiling. The drop depth is 100cm and cannot be changed. With a ceiling height of 2.85 m, this results in exactly the standard height of the laundry lines of 1.85 m.'As smaller laundry hangers on the wallThe console is perforated every 12.5 cm so that it can be supplemented with the sliding rollers from Dryfix. This allows for a practical junior line system to be built at hip height or a higher-mounted additional hanging system with 8 tracks, for example, for bed linen, etc. Please also refer to our junior line complete sets.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.

Learn more More Fewer

Sliding rollers for laundry line system (available individually)Consisting of a sliding roller made of durable plastic, screw, nut. For self-assembly on connection rails. Suitable for laundry line connecting rails from Dryfix and Krüger SunLine.   Available in the colors black, yellow, blue. Technical data Rolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cm Screws: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm

Learn more More Fewer

The aluminum glide roller angles are suitable wherever only a few lines can fit, where lines can hardly be bridged over the wall, or for the expansion of existing laundry line systems. For direct wall mounting without a rail, according to the illustration.Complete with:- Aluminum shop- sliding roller- suitable screw for fixation on angle- Lock nut(Wall screw not included) Available colors of the sliding rollers: black, blue, yellow Technical dataWeight: 0.03kgAngle: Aluminum, Height 2cm, Depth 3cm, Width 2cm, Material thickness 2.5mm Rolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cm Screws: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm

Learn more More Fewer

Sliding rollers for laundry line system (available individually)Consisting of a sliding roller made of durable plastic, screw, nut.For self-assembly on connection rails.Suitable for laundry line connecting rails from Dryfix and Krüger SunLine. Available in the colors black, yellow, blue. Technical dataRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm 

Learn more More Fewer

The aluminum glide roller angles are suitable wherever only a few lines can fit, where lines can hardly be bridged over the wall, or for the expansion of existing laundry line systems. For direct wall mounting without a rail, according to the illustration.Complete with:- Aluminum shop- sliding roller- suitable screw for fixation on angle- Lock nut(Wall screw not included)Available colors of the sliding rollers: black, blue, yellow Technical dataWeight: 0.03kgAngle: Aluminum, Height 2cm, Depth 3cm, Width 2cm, Material thickness 2.5mmRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm 

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation:     Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend the 2 pieces up to 1.50 m rail width (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer

The aluminum glide roller angles are suitable wherever only a few lines can fit, where lines can hardly be bridged over the wall, or for the expansion of existing laundry line systems. For direct wall mounting without a rail, according to the illustration.Complete with:- Aluminum shop- sliding roller- suitable screw for fixation on angle- Lock nut(Wall screw not included)Available colors of the sliding rollers: black, blue, yellow Technical dataWeight: 0.03kgAngle: Aluminum, Height 2cm, Depth 3cm, Width 2cm, Material thickness 2.5mmRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems   "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems   "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer

Ceiling telescopes for ceiling-mounted laundry line systems   "With the ceiling telescopes, you can hang the connecting rails of your laundry line system at the appropriate height from the ceiling. The Dryfix and Krüger connecting rails are compatible with these supports."   The ceiling telescopes are made of chrome-plated metal (longest version: galvanized) and offer solid stability and load capacity of the system. Depending on the room height and the desired height of the lines, 4 versions are available. The telescopes can be precisely adjusted in height within the dimensions described below, with the height not being changeable after installation: Length 1: adjustable 230-330mm from ceiling Fr. 34.00Length 2: adjustable 400-600mm from ceiling Fr. 36.00Length 3: adjustable 550-800mm from ceiling Fr. 39.00Length 4: adjustable 750-1050mm from ceiling Fr. 58.00   Example: the room is 2.30m high, the curtains should be at the standard height of 1.85m. You need a distance of 45 cm from the ceiling. The suitable telescope in this example is therefore length 2.   Please note that mounting directly onto the concrete ceiling provides the best stability. If the ceiling is insulated, we recommend cutting out the insulation for stability reasons, mounting the beams directly onto the concrete, and then sealing the cutouts afterwards. When mounting on the insulation, it may break due to the strong tension of the cables.   It should also be noted that there are often pipes installed in the ceiling. A drilling depth of more than 3cm can damage electrical or water lines.   How many ceiling mounts are needed?Due to the strong cable pull, we recommend you use 2 pieces with a rail width of 1.50 m (per connecting rail) for longer rails 3 pieces (per connecting rail).

Learn more More Fewer

Distance rollers 3cm for bridging cables or lines. For mounting between wall and laundry line connection rails. Made of solid robust plastic, compatible with all connection rails from our program.  Technical dataLength: 30 mmOuter diameter: 25 mmDiameter hole: 10 mmMaterial / Color:   robust plastic, anthraciteWeight: 21 gr  

Learn more More Fewer

Caster wheels (without brakes) for dehumidifiers Dryfix Quadro Q40 and Q80. Plastic, black, available individually.The roles are screwed to the bottom of the housing, and the replacement can be easily done with a few hand movements and the appropriate screwdriver.

Learn more More Fewer

From the "Topten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms up to 15m.² and approx. 40m of clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively narrow metal housing integrates optimally into the room's appearance. For installation, the support rail is fixed to the wall with two screws, and the dryer can then be easily hung. Rubber buffers prevent the transmission of (very low) vibrations to the wall. The condensate is directed via a hose either directly into a drain or into a bucket placed under the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out from the front for cleaning.  Drying programs:On the side of the housing is the control. A toggle switch is used to select whether you want the "Drying" mode or "Room Monitoring". A rotary switch can be used to easily adjust the desired residual moisture.Clothes drying: The drying program can be started at the push of a button. The dehumidifier runs until the laundry is dry and then automatically switches off. Room Monitoring: The general room monitoring serves to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the value set on the dial, with an ideal value for this mode being around 55-60%. Unlike the laundry drying programs, the dryer never completely turns off in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also reactivate.  You can only get the Dryfix Swiss from us! It is exclusively manufactured for our company in a specialized factory in Switzerland.Ambient temperatureTechnically, the "Swiss" tumble dryers can be used down to 5°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wall  The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 1m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose if possible. If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data drying room: up to 15m² Drying performance: 1.73 Kg/h Consumption per kg of laundry: 0.307 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 530W Sound pressure level (our measurement): 1.0 m distance 60 dB(A) 2.5 m distance 57 dB(A) Dehumidification capacity: 26 liters/day (30°C / 80% r.H.) air circulation volume: 600m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410A Dimensions (H/W/D): 55 x 57 x 26 cm (Depth: from wall to front) Weight: 35 Kg    Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Special features: Made in Switzerland

Learn more More Fewer