This extremely powerful dehumidifier is specifically designed for demanding dehumidification tasks, such as the rapid drying of water damage, effective construction drying in large or heavily damp rooms, as well as the gentle drying of herbs. Due to its high performance, this dryer is available exclusively with a hose connection, making the use of a water container unnecessary and allowing for continuous operation.The dryer is to be set up freestanding in the room, with the clearly arranged control panel and the intake area for the humid room air positioned at the front of the device for easy access. The generated dry air is distributed widely in the room with high volume and strong airflow through the side outlet to ensure efficient and uniform dehumidification. A washable air filter in the intake area reliably protects the interior of the device from dust and dirt, thus contributing to the longevity and performance of the dehumidifier.SettingsThe operator panel displays the currently measured room humidity and the set target humidity. If desired, the room temperature and the remaining time of any activated timer can also be queried. Using the buttons, the desired target humidity can be set in 5% increments between 20-90%. Once the desired humidity is reached, the compressor pauses while the ventilation continues to verify the current humidity in the room. In addition to humidity-dependent operation, continuous operation is also possible.Furthermore, the device has a timer that allows the runtime to be limited to 1-24 hours once, or it can set the start time to a later point 1-24 hours in the future. If the operation is to start and end at the same time every day, this can be done with a standard timer. Thanks to the memory function, the settings are saved, so that operation can be resumed with unchanged settings after a power interruption.condensationThe condensate is drained directly through a hose into a lower-lying drain. The dryer does not have a bucket. A hose piece of about one meter is included in the delivery.Temperature protectionIf the room temperature drops too low (below +5°C) or rises too high (above +35°C), a safety mechanism will interrupt operation until the temperature in the room is back to normal. dehumidification performanceThe dryer can be used over a wide temperature range from +5°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H. = 90.0 Liters / 24h (1080W)27°C / 60% r.H. = 50.0 Liters / 24h (920W)20°C / 80% r.H. = 45.0 liters / 24h20°C / 60% r.H. = 27.0 Liters / 24h10°C / 60% r.H. = 13.0 Liters / 24h(r.H.=relative humidity)    Characteristics• Dehumidification capacity of up to 90 liters per day • Electric hygrostat (LED) for regulating and setting the desired humidity • Function for continuous operation/continuous dehumidification • Memory function for storing data and for automatic resumption of operation after power interruption• Clear display including current humidity, target humidity, and status overview• Equipped with a high-efficiency rotary compressor (Rotary Compressor)• Automatic professional defrost function• Humidity control in 5% steps between 20% - 90% (plus continuous operation function)• Powder-coated metal housing/ metal bracket• Very easy mobility due to transport handles and 2 large and 2 smaller running wheels• Operating warning light / Defrost light• Maintenance-free / No separate or additional coolant is required (closed circuit)• Air filter grid that can be cleaned• The device is immediately ready for use (no installation or assembly required)• Swiss plug 230 V • CFC-free and compliance with WEEE standards, CE, REACH, GS, and RoHS certified.• Environmentally friendly refrigerant R290Examples of useDehumidifier: Ideal for quick drying of concrete, basements, plaster, screed, water damage, etc.Damage Removal: After flooding or damage caused by extinguishing water, these devices are ideally suited for drying (professionals as well as insurance companies use these devices.)Drying of Herbs and Wood: Significantly accelerates the drying of wood as well as herbs such as tea, CBD, etc., and prevents mold formation on the drying material.  Technical data   Tension 220-240V / 50Hz Power consumption max. 1080W (4.8A) Sound pressure level 1 m distance 62 dB(A)2.5m distance 59 dB(A)(our measurement) dehumidification performance max. 90 liters/24h (30°C / 80% r.H.)  Recirculation air volume 850 m³/h (free-blowing) Condensation tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R290 (GWP: 3) Dimensions (H x W x D)  1010 x 584 x 575 mm Weight 54 Kg Operational cessation per key press / digital display Ambient temperature 5°C ~ 35°C Area of application Rooms from min. 14m² to max. 230m² (650m³) Swiss plug Yes   hose connection Yes operating hour meter No Guarantee 2 years

Learn more More Fewer

From the "Topten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms up to 15m.² and approx. 40m of clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively narrow metal housing integrates optimally into the room's appearance. For installation, the support rail is fixed to the wall with two screws, and the dryer can then be easily hung. Rubber buffers prevent the transmission of (very low) vibrations to the wall. The condensate is directed via a hose either directly into a drain or into a bucket placed under the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out from the front for cleaning.  Drying programs:On the side of the housing is the control. A toggle switch is used to select whether you want the "Drying" mode or "Room Monitoring". A rotary switch can be used to easily adjust the desired residual moisture.Clothes drying: The drying program can be started at the push of a button. The dehumidifier runs until the laundry is dry and then automatically switches off. Room Monitoring: The general room monitoring serves to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the value set on the dial, with an ideal value for this mode being around 55-60%. Unlike the laundry drying programs, the dryer never completely turns off in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also reactivate.  You can only get the Dryfix Swiss from us! It is exclusively manufactured for our company in a specialized factory in Switzerland.Ambient temperatureTechnically, the "Swiss" tumble dryers can be used down to 5°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wall  The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 1m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose if possible. If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data drying room: up to 15m² Drying performance: 1.73 Kg/h Consumption per kg of laundry: 0.307 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 530W Sound pressure level (our measurement): 1.0 m distance 60 dB(A) 2.5 m distance 57 dB(A) Dehumidification capacity: 26 liters/day (30°C / 80% r.H.) air circulation volume: 600m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410A Dimensions (H/W/D): 55 x 57 x 26 cm (Depth: from wall to front) Weight: 35 Kg    Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Special features: Made in Switzerland

Learn more More Fewer

High-quality floor fan made of robust metal and the rotors (50 cm diameter) made of aluminum. The fan head can be tilted vertically, allowing the airflow to be directed in any desired direction. The device has three speed settings, a practical carrying handle, and a good price-performance ratio.Ideal for supporting water damage drying or for air circulation in any rooms. Due to its high reliability, the fan is also suitable for unattended continuous operation.Characteristics• Large fan head with good air circulation• Three fan speed levels, easily adjustable via a push button on the back.• The fan's direction of airflow is horizontally adjustable without steps.• Completely made of robust metal• Rotor blades made of 100% aluminum• Powerful, durable high-performance engine• Handy and easy to transport thanks to the carrying handle• Long power cable, approx. 1.70 m length, Swiss plug• No assembly required, the fan is ready to use immediately.• Comparatively quiet operation• RoHS and CE compliant Technical data  Power consumption 120 Watts max. Rotordurchmesser 50 cm airflow Up to 9000 m³/h air speed max. 4.25 m/s Noise (our measurement): 1 m distance Step 1-3: 62-66 dB(A)2.5 m distance step 1-3: 59-63 dB(A) speed levels 3 Cable length approx. 1.70 m Connection Swiss plug 230V 3-pole (standard household socket) Dimensions ( W x H x D ) 58.5 x 57 x 19 cm Weight 6kg scope of delivery plug-in fan, no assembly required guarantee 2 years Documents / Downloads   User Manual DE - FR - IT - EN

Learn more More Fewer

Top Price / PerformanceA compact, powerful 9 kW heater fan for heating construction sites and industrial rooms. It features a robust metal housing with a practical carrying handle. The device is equipped with a cable of approximately 1.4m in length and a CEE16A plug (high current). If needed, suitable extension cables in various lengths can be ordered.The "H9000 professional" impresses compared to conventional heaters in this category in various respects:• He is smaller and lighter, but no less robust and of high quality.• The tube shape better concentrates the air, achieving a higher air speed and thus a greater throwing distance of the warm air stream into the room.• Control at the bottom instead of at the top of the housing: This protects the control at the end of operation from rising residual heat and thus from overheating of the electronics. This extends the lifespan of the heating and prevents operational disruptions.- Removable feet: the heater can also be easily screwed onto a wall console if it is to have a fixed place.With the function switch, the device can be set to 4500 or 9000 W heating power or used only as a fan. A room thermostat maintains the temperature at the set value. When the desired temperature is reached, the heating turns off while the fan continues to run to always measure the correct temperature value of the room.These heaters are excellent for use in garages, workshops, storage rooms, retail stores, greenhouses, sports and factory halls, as well as for various other applications. Execution of this heating blower • Robust metal housing• Carrying handles• Room thermostat• Safety thermostat, protects against overheating• Including cable and plug scope of delivery • Plug-and-play device• Carrying handle with two screws (can be very easily mounted if needed)• Cable approx. 1.40 m / Q2.5 mm² + CEE plug 5-pole 16 A (red/round plug, complies with Swiss standard) How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data    Heating capacity: 9 kW Stages: only recirculation 55 W / 4.5 kW / 9 kW Air volume: 701 m³/h Air speed: 6.4 m / sec. (our measurement) Room thermostat: stepless 4-40 °C Sound level: 63 dB(A) at a distance of 2.5 m Dimensions (H x W x D): 370 x 250 x 370 mm Weight: 6.4 kg Input max.: 12.4 A Connection: 400V / 50Hz Cable / Plug: approx. 1.4 m Q2.5 mm + EURO CEE16A Test certificates: CE / LVD / EMC / RoHS / Erp Protection class: IP44 automatic overheating protection at 60 °C

Learn more More Fewer

Digital Socket Hygrostat Dryfix AC38The hygrostat plug was specifically developed for the control of dehumidifiers. It can be used with all dryers that resume operation after a power interruption with unchanged settings.The operation is very simple and intuitive:The plug is inserted into any household socket in the room, and the dryer is connected to the hygrostat plug. By pressing a button, the desired target humidity can now be set, which is the humidity level that the room should be maintained at. If the measured humidity is higher, the Aircontrol AC38 supplies power to the drying device; if the humidity is correct, the power is interrupted.Unlike conventional plugs of this type, the Dryfix Aircontrol not only focuses on purely moisture-based monitoring but also takes into account the technical aspects of a dehumidifier. This significantly saves electricity and protects the connected device from damage, for example, in case of too low ambient temperature or due to too rapid reactivation. Although most dehumidifiers already come with a built-in hygrostat (humidity meter), the Aircontrol AC38 still has advantages:• The measurement point for the room humidity is at the plug itself. Especially in larger rooms, the air is drier immediately near the device than in more distant areas of the room. If the plug is inserted a little away from the device, it ensures that the humidity is correct throughout the entire room.• If the dehumidifier is used for humidity control in two adjacent rooms, the device can be placed in one room and controlled with an extension cord from the second room, where the hygrometer plug is located. This ensures that the dryer runs until the humidity in the second room is also acceptable.• Power-saving function No. 1: When a dehumidifier turns off after reaching the target humidity, there is still residual moisture inside from the previous operation. This moisture accumulates in the housing and affects the measuring sensor inside to a certain extent. This means that the device restarts too quickly because the sensor itself measures the correct value, but is located in the wrong environment (inside the housing instead of in the room). Especially in digitally controlled devices (with a display), the sensors are usually placed directly on the cooling element, which is unfavorable. In mechanically controlled devices (with a dial for humidity control), the distortion is less, but still present. With the hygrostat plug, the room humidity is measured not in the device, but in the room. The value measured there is therefore more precise than when measured in the device. This saves electricity because the dryer switches on less frequently.• Power-saving function No. 2: a huge plus of the Aircontol38! When a dehumidifier starts to work, the compressor pumps refrigerant through the cooling pipes to make them cold, thus allowing the air to condense (=dehumidified). However, this process takes a few minutes until the cooling element reaches its optimal operating temperature and thus its effect. This also means that the dehumidifier consumes full power during this time but has not yet dehumidified. Most dehumidifiers therefore have a switching tolerance between the achieved target humidity and the subsequent reactivation of about 3-5%. For the aforementioned reason, it is more efficient to reduce by 5% at once than to constantly switch on and off at 1%. The lifespan of the compressor is also improved when the dryer has to switch on less frequently. Commercially available hygrometer plugs usually operate in a narrow, thus uneconomical switching mode of 1%. However, the Dryfix Aircontol38 adopts this switching tolerance of 3% and only switches back on when the measured humidity value has increased by 3%.Temperature protection: The second big advantage! Most dehumidifiers are suitable for ambient temperatures of 4-5°C to about 32-35°C. If the room gets too cold, an ice layer forms on the cooling element, which the dehumidifier can no longer defrost. As a result, an ice layer can grow, which can damage the device. The Aircontol 38, unlike conventional plugs, has a temperature protection feature that interrupts the power to the dehumidifier as soon as the room temperature is too cold for operation, falling to 4°C or colder.The entered values are automatically saved and remain valid after a power interruption. A backup battery is therefore not required for this model. How do I know if my dehumidifier is suitable?The Aircontol 38 can be used with all dryers that resume operation after a power interruption with unchanged settings, so generally for all dehumidifiers that are regulated with a rotary knob. It is not suitable for devices that go into "standby" mode after a power interruption. These are some electronically controlled devices, usually recognizable by the display. Whether a device is suitable or not can be tested very easily:"Turn on the device, then unplug it and plug it back in after 10 seconds. If the dehumidifier resumes operation automatically with unchanged settings, it is also compatible with this plug. If it goes into standby and needs to be restarted, the dryer is not suitable. The plug itself does exactly the same thing. It provides or interrupts power." Application:"To completely leave the humidity control to the hygrostat plug, the connected dehumidifier must be set to maximum operation, i.e., continuous operation (in some dehumidifiers also recognizable as "Continuous" or "CO"). In this position, the devices ignore the measured room humidity and run whenever the hygrostat plug provides power. Thus, the humidity is measured at the plug, not in the device."2 year guaranteeShipping costs for 1 item: Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical data   Voltage: 220-240 V / 50Hzcurrent load max.: 10AMesssensor : 103AT, C10-M53RAmbient temperature: 0 – +50 °CAmbient humidity: 5 – 95% r.H.Selectable target humidity: 30 – 90% r.H.  

Learn more More Fewer

DRYFIX absorbs moisture up to 200 times its own volume within minutes and transforms it into a solid gel. This allows spilled liquids to be quickly and efficiently absorbed. The practical helper in the household for textiles, floors, and furniture. Application examples in the household"Binds spilled liquids, such as knocked-over drinks like red wine or water, but also animal urine or vomit."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc. Odors are also trapped and largely absorbed.Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).     Simple application The powder is sprinkled directly into the standing water or on the damp areas. In doing so, it absorbs moisture down to the pores and forms a compact (environmentally friendly) gel, which also encapsulates odors and small particles such as small glass shards. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."   Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc. Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: Seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

By using the Dryfix drying granules "Home" or "Pro", a gel is created that can be easily and quickly re-liquefied with this powder. Sprinkle it over the formed gel after completing the work. After approximately 5 minutes, it transforms back into water.  Advantages • No disposal of the gel necessary• Saves time• Simple application• Safe for the environment   Application example after flat roof renovation or application in the interior or household   1. Sweep the gel formed by the application of Dryfix granulate and fill it into a kettle. 2. Sprinkle some "Flu" granulate onto the gel and stir. 3. Reapply as needed 4. Pour away water            Application example for pipes, lines, or toilets   1. Sprinkle some "Flu" granulate directly onto the gel formed by the application of Dryfix granulate and stir. 2. Rinse with water        Important in flat roof renovation The "Flu" should not be applied in strong sunlight, as the heat generated can damage the top bitumen layer. This is especially true if the powder remains for an extended period. In this case, we recommend not to liquefy the drying granulate directly on the roof, but to collect it in a bucket and liquefy it there. Alternatively, the drying granulate can also be disposed of in a waste bag.  

Learn more More Fewer

This hygrometer/thermometer is the most accurate measuring instrument for humidity and temperature in the "affordable" range in our offering."It is manufactured in a German precision factory for our company and has a very fast response time. The values are measured every 10 seconds, and the display alternates every 5 seconds between temperature and humidity. If a value changes significantly compared to the last measurement, this is additionally displayed as a trend with an arrow indicator pointing up or down."The hygrometer DFH can be hung on the wall or placed on the included stand. The modern, simple design also fits into living spaces or offices. "Two AAA batteries are required for operation (included in the delivery)"     Technical data   Dimensions (H x W x D)     10 x 8.5 x 2.6 cm Weight 97 gr. Measuring range 10% - 95% r. humidity Measurement accuracy 40 - 60%: max. deviation 2 % 10 - 39/61 - 95%: max. deviation 3 % (Resolution: 0.1 % r.H.) Ambient temperature -5°C - 55° at 20°C 0.3°C (Resolution: 0.1 % r.H.) Mass time every 10 seconds Protection class IP20 (not suitable for outdoor installation) Guarantee: 2 years

Learn more More Fewer

This combined activated carbon/HEPA filter fits the Dryfix X3 dehumidifier. The HEPA filter cleans the air with a purity rate of nearly 100% with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that airborne pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). An activated carbon element is also integrated into the filter, which actively breaks down odors and vapors. "It can be very easily mounted on the back of the dehumidifier in the air intake area behind the standard coarse dust filter."  'This filter is part of the consumables and cannot be washed. It is only suitable for the dehumidifier Dryfix "X3".' Regarding cleaning effectiveness against the Corona virus:Coronaviruses have a diameter of about 60 - 160 nm (60 nm = 0.00006 mm).The HEPA filter in this device cleans particles up to 0.0003 mm in size. The virus is therefore smaller than the filter's purity rate.But: Viruses do not fly individually in the air, but are always enclosed in larger droplets (so-called aerosols). In human breath, the smallest droplets have a size of about 1 µm = 0.001 mm (when coughing: 10 µm = 0.01 mm). The HEPA filter captures the aerosols and also cleans the air of COVID-19 viruses. There is of course no 100% protection, as an air purifier does not clean the entire room volume at once and because surfaces can also be contaminated by touch. However, for risk reduction, e.g., in waiting rooms, classrooms, offices, or even in private settings, the device is very effective and recommended.

Learn more More Fewer

HEPA filter, suitable for dehumidifier Dryfix Royal24. This filter is inserted at the back of the dehumidifier behind the standard filter frame into the designated recess.Hepa filters clean the air of fine dust, pollen, viruses, and bacteria with a purity rate of over 99.9%.'This filter is part of the consumables and cannot be washed. It is only suitable for the dehumidifier "Dryfix Royal24".'Sold individually. Technical dataDimensions: 215 x 225 x 20mmwith two tabs for easier removal 

Learn more More Fewer

Space-saving, extendable laundry hangers for wall mounting. This system offers surprisingly much space for drying smaller laundry items on 5 metal bars, each 1.20m wide. Ideal in spatially confined conditions or as a secondary hanging for occasional drying needs.Easy assembly: the system is fully assembled and only needs to be fixed to the wall with 4 screws / dowels (included in the delivery).Space requirement: extended max. 120 x 46 cm from the wall, retracted 120 x 10 cmLoad capacity approx. 12 kgMaterial: Metal rods, white powder-coatedShipping costs for 1 piece Fr. 18.- (this laundry rack is sent exclusively by courier due to the package dimensions). warranty 2 years Technical data   width 120 cmtotal height 17 cmDepth 10-46 cm from wall  

Learn more More Fewer

Complete wall-to-wall laundry line system made of stainless aluminum rails for self-assembly. Affordable, stable design with Dryfix corner rails and pre-assembled sliding rollers. The screws/anchors required for assembly can be ordered free of charge. White plastic-coated wire rope and chrome cable tensioner for optimal load capacity.0.95 m wide (7 lanes) with20 m rope (line length max. 2.70 m)30 m rope (line length max. 4.10 m)40 m rope (line length max. 5.50 m)50 m rope (line length max. 7.00 m)1.15 m wide (8 lanes) with20 m rope (line length max. 2.30 m)30 m rope (line length max. 3.60 m)40 m rope (line length max. 4.85 m)50 m rope (line length max. 6.10 m)Complete wall-to-wall clothesline system for self-assembly.The set consists of:- 2 x support rails made of sturdy aluminum, perforated for wall mounting- Dryfix sliding rollers black (15 cm distance between the lines)- 1 rope tensioner- plasticized wire rope white- Order for free upon request: Dowels and screws for wall mountingTo calculate the correct rope length, you calculate (Room length x number of lanes) + (1 x rail width) + approx. 10 cm for the insertion of the rope end into the rope tensioner.The rollers are pre-assembled on the carrier rails in this package."Laundry line systems from 1m in length will be shipped by courier in any case."  Technical DataWeight Dryfix Alu complete 1.45m widewith 30m rope 2990 gr.with 40m rope 3259 gr.with 50m rope 3500 gr.  

Learn more More Fewer

Dryfix Vario Metal Laundry Line System, 15 cm Line SpacingComplete wall-to-wall laundry line system for self-assembly, can be combined with wall or ceiling brackets and expanded into a wall-to-ceiling or ceiling-to-ceiling system. Pre-assembled sliding rollers. The screws/anchors required for installation can be ordered free of charge upon request. White plastic-coated wire rope and chrome-plated cable tensioner for optimal load capacity.0.78 m wide (6 lanes) with 20 m rope (line length max. 3.20 m)30 m rope (line length max. 4.80 m)40 m rope (line length max. 6.50 m)50 m rope (line length max. 8.20 m)1.08 m wide (8 lanes) with 20 m rope (line length max. 2.35 m)30 m rope (line length max. 3.60 m)40 m rope (line length max. 4.85 m)50 m rope (line length max. 6.10 m)1.23 m wide (9 lanes) with20 m rope (line length max. 2.05 m)30 m rope (line length max. 3.15 m)40 m rope (line length max. 4.25 m)50 m rope (line length max. 5.35 m)  1.53 m wide (11 lanes) with 30 m rope (line length max. 2.55 m)40 m rope (line length max. 3.45 m)50 m rope (line length max. 4.35 m)70 m rope (line length max. 6.20 m)1.83 m wide (13 lanes) with 30 m rope (line length max. 2.15 m)40 m rope (line length max. 2.90 m)50 m rope (line length max. 3.65 m)70 m rope (line length max. 5.20 m)2.28 m wide (16 lanes) with30 m rope (line length max. 1.70 m)40 m rope (line length max. 2.35 m)50 m rope (line length max. 2.95 m)70 m rope (line length max. 4.20 m) "Can be combined with all wall or ceiling supports from Dryfix, Krüger, Lübra. For rail lengths up to 1.53m, two supports per side are sufficient; above that, we recommend 3 supports per side due to the strong cable tension." The set consists of:- 2 x connection rails made of sturdy metal (4mm thick), perforated for wall mounting- Dryfix sliding rollers (15 cm distance between the lines), color selectable: black, yellow, blue- 1 rope tensioner- plasticized wire rope white- on request: free dowels and screws for wall mountingTo calculate the correct rope length, you calculate(Room length x number of lanes) + (1 x rail width) + approx. 10 cm for the insertion of the rope end into the rope tensioner.The rollers are pre-assembled on the carrier rails in this package.Option Montage: If you would like to have the system professionally installed at your location, please request a quote (depending on distance and possibly other items to be installed).Shipping costs for 1 set Fr. 14.- (we only ship this laundry rack via courier due to the package dimensions). Technical data Dryfix Vario Metal complete  0.78m with 20m rope: 6793g with 30m rope: 7013g with 40m rope: 7282gwith 50m rope: 7523g 1.08m with 20m rope: 8019gwith 30m rope: 8239g with 40m rope: 8508g with 50m rope: 8749g with 70m rope: 9257g 1.53m with 30m rope: 11579g with 40m rope: 11848g with 50m rope: 12089gwith 70m rope: 12597g 2.28m with 30m rope: 14093g with 40m rope: 14362g with 50m rope: 14603g with 70m rope: 15111g

Learn more More Fewer

Complete laundry line system for self-assembly with sturdy T-telescopes made of stainless metal. Ideal as a secondary hanging solution or wherever a wall-to-wall solution is not possible due to spatial reasons. This system requires a stable, non-insulated supporting wall, ideally made of concrete or masonry. The supports extend 60 cm into the room and have space for 5 lines.White plasticized wire rope and chrome-plated cable tensioner for optimal load capacity.The set consists of• 2 x T-beams made of sturdy metal, length 60 m. The first line is 14.2 cm away from the wall, then 10 cm distance.• 10 sliding rollers Dryfix, color selectable black, yellow, blue• 1 rope tensioner• plasticized wire rope white 10m• Dowels and screws for wall mountingThe rollers are pre-assembled on the carrier rails in this package.Ideal mounting heightAs a junior line (additional hang) at a comfortable working height (approx. 1m), or as a main hang at approx. 1.85m height.

Learn more More Fewer

Complete laundry line system for self-assembly with sturdy T-telescopes made of stainless metal. Ideal as a secondary hanging solution or wherever a wall-to-wall solution is not possible due to space constraints. This system requires a stable, non-insulated supporting wall, ideally made of concrete or masonry. White plastic-coated wire rope and chrome-plated cable tensioner for optimal load capacity.1 m (8 lanes) with20 m rope - for a width of max. 2.36 m The set consists of- 2 x T-beams made of sturdy metal with a widened mounting plate for ideal stability, length 1 m. The first line is 10 cm away from the wall, then 12.5 cm distance.- 16 sliding rollers Dryfix, color selectable black, yellow, blue- 1 rope tensioner- plasticized wire rope white- 4 dowels and screws for wall mountingThe rollers are pre-assembled on the carrier rails in this package.Ideal mounting heightas main hangs approx. 1.85-1.95m (to avoid injuries, install above head height), or as wide secondary hangs also popular at hip height.Technical data   Material: galvanized metal, rust-freeMass foot: 18 x 18 cm, 4-fold punched (10 mm diameter)Total length from wall: 100 cmDistance of the holes from the wall: 10 / 22.5 / 35 / 47.5 / 60 / 72.5 / 85 / 97.5 cm Compatible with all systems from Dryfix, Krüger, Lübra, and Roth-Kippe.  

Learn more More Fewer

This HEPA filter is compatible with the dehumidifier Quadro Q80 + X80 and cleans the air with an almost 100% purity rate with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that airborne pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed."It can be easily clicked into place on the back of the dehumidifier at the air intake area. It replaces the standard filter of the device."As original equipment, you need the complete filter including the mounting frame (CHF 38.-), for replacement filters it is sufficient to order only the HEPA filter itself without the frame (CHF 29.-).This filter only fits the Quadro Q80 + X80. The filter for the Quadro Q40 + X40 is smaller and does not fit the Q80 + X80. Technical dataWeight: 0.3kgDimensions (H x W x D): 30.5 x 31.5 x 3.7 cm 

Learn more More Fewer

This HEPA filter is compatible with the dehumidifier Quadro Q80 + X80 and cleans the air with an almost 100% purity rate with every pass through the device. This means that even the finest particles such as pollen, fine dust, mold spores, and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that airborne pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed."It can be easily clicked into place on the back of the dehumidifier at the air intake area. It replaces the standard filter of the device."As original equipment, you need the complete filter including the mounting frame (CHF 38.-), for replacement filters it is sufficient to order only the HEPA filter itself without the frame (CHF 29.-).This filter only fits the Quadro Q80 + X80. The filter for the Quadro Q40 + X40 is smaller and does not fit the Q80 + X80.  Technical dataWeight: 0.3kgDimensions (H x W x D): 30.5 x 31.5 x 3.7 cm

Learn more More Fewer

Replacement HEPA filter, suitable for the dehumidifier Quadro Q40 + X40. It cleans the air with a purity rate of nearly 100% with every pass through the device. This means that fine particles such as pollen, fine dust, mold spores, as well as viruses and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that flying pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed.The filter is clicked into place at the back of the dehumidifier in the air intake area. It replaces the standard filter of the device.The filter in this offer is a replacement filter. without the mounting frame required for the application. Therefore, for the initial equipment, you will also need the mounting according to the offer further down this page (complete Fr. 38.-).This filter only fits the Quadro Q40 + X40. The filter of the Quadro Q80 + X80 is larger and does not fit the Q40 + X40.   Technical dataWeight: 0.3kgDimensions (H x W x D): 19.5 x 31.5 x 3.7 cm

Learn more More Fewer

This HEPA filter is compatible with the dehumidifier Quadro Q40 + X40. It cleans the air with a purity rate of nearly 100% with every pass through the device. This means that fine particles such as pollen, fine dust, mold spores, as well as viruses and other tiny contaminants are captured. The filter is therefore highly recommended, for example, in basements with mold infestations, but also during laundry drying, so that flying pollen is not blown onto the hanging laundry and contaminates it (e.g., in case of pollen allergy). The HEPA filter is considered consumable and cannot be washed."It can be easily clicked into place on the back of the dehumidifier at the air intake area. It replaces the standard filter of the device."As original equipment, you need the complete filter including the mounting frame. For replacement filters, it is sufficient to order only the HEPA filter itself without the frame (further down this page (Fr. 29.-).This filter only fits the Quadro Q40 + X40. The filter of the Quadro Q80 + X80 is larger and does not fit the Q40 + X40.   Technical dataWeight: 0.3kgDimensions (H x W x D): 19.5 x 31.5 x 3.7 cm

Learn more More Fewer

The Dryfix "HotAirStopper" and "HotAirStopper XL" are practical accessories for mobile air conditioning units. They simply and reliably seal the window opening required for the passage of the exhaust hose from mobile air conditioning units. This window seal prevents heat from outside on one hand, and the expelled warm air from the air conditioning unit itself from flowing back into the room on the other hand. As a side effect, it keeps mosquitoes and other unwanted insects away. Ultimately, the solution also saves energy: the efficiency of the air conditioning unit is significantly increased because the heat load in the room is reduced.Function principle and assemblyThe Dryfix "HotAirStopper" consists of a roll of hook-and-loop tape that is adhesive on one side, as well as a cloth made of durable special fabric. Incorporated into the cloth is a zipper with two opposing zippers, which allows the exhaust hose to be fixed at the appropriate height from both sides in the window opening. The installation is comparably simple, like attaching a mosquito net: the hook-and-loop strip is glued along the three open sides of the window itself and the window frame. The cloth can then be easily attached with the hook-and-loop. A corresponding installation manual is included in the delivery. By the way, the windows can still be closed even when the cloth is mounted. Ideally, the cloth should not be stretched too tightly over the corners. Calculation window cycleThe standard version fits all common casement or tilt windows, whose three open sides do not exceed a total measurement of 400 cm. Only with us can you also get an XL version for a total measurement of 600 cm (surcharge +CHF 10.-) while supplies last.Calculation of total mass, example tilt window: (2 x window height) + (1 x width)Calculation of total mass, example wing window: (1 x window height) + (2 x width)Advantages and Features• Easy assembly with Velcro tape• Lower room temperature possible• more pleasant sleep without mosquitoes• No ingress of exhaust air and moisture• Window can be opened and closed• Energy-saving and water-repellent• Also suitable for roof windows that can be opened on one side (not for roof windows that rotate around an axis)   questions and answersWhich windows does the system work on?For all common tilt-and-turn windows in old and new buildings, as well as for installable skylights. Ideal are plastic or metal windows. With older, painted wooden windows, some paint may come off when removing the adhesive tape (similar to a mosquito net).  Can I also use the system on my balcony door?Yes. If you open the door as a wing, the standard version is sufficient. If the balcony door is tilted, the XL version fits.Is the cloth machine washable?Yes, up to 40°, e.g. wash program "easy care"   Which air conditioning/extraction devices is the system compatible with?With all devices that have a flexible exhaust hose, also with the mobile split air conditioning units "Ulisse" from our range.

Learn more More Fewer

Suitable for a variety of larger dehumidifiers. The 48cm version fits, for example, our dehumidifiers Quadro Q40, Flipperdry F300, Optimo80, E33, Oasis, and Woods. The side supports and 5mm raised edges at the bottom prevent the dehumidifier from rolling away.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate.scope of delivery- Wall bracket made of powder-coated white steel sheet- 2 screws/anchors for wall mounting  Data Internal dimensions (Height x Width x Depth): 26 x 48 x 39 cmWeight: 2kgLoad capacity: max. 23 kg Lochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mm

Learn more More Fewer

Wall console, suitable for a variety of smaller dehumidifiers from our range, for example to:Dryfix Royal, Foxy F12 + X3, Airsec3000, Lübra LDH626L + WDH101pro, Akto930, WDH-416S/725DG, Optimo20 etc.On the back panel, there are two screw holes of 10mm for wall mounting, as well as a centered hole of 30mm for the passage of a drainage hose through the base plate. execution40.5 cm inner width / 41.5 cm outer widthSteel sheet white powder-coated or light gray powder-coated Scope of delivery:- Wall mount made of sheet steel- 2 screws/anchors for wall mounting   Technical data Dimensions (Height x Width x Depth): 25 x 41.5 x 30 cmWeight: 1.5kgLochmasse: Wall side top right/left 2 x 10mm, floor back centered 30mmload capacity up to 16 kgLarger versionfor larger or heavier dehumidifiers, please also refer to our bracket for large devices.

Learn more More Fewer

Exclusively with us!The X-Tank Basic is an additional bucket for wall-mounted dryers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow. The X-Tank Basic can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the flat rack with scale, including power cable and matching 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.The X-Tank was developed by us (Patent CH709716) and is exclusively available from us.    scope of delivery plug-and-play device including matching 20-liter bucket   Technical data Mass HxWxD: 180 x 480 x 390 mm (Dimensions without bucket) Weight: 7 kg Material: Metal white powder-coated connection cable: 2m with 3-pole Swiss plug (fits into standard household socket) Guarantee: 2 years

Learn more More Fewer

Exclusively with us!The X-Tank Top is an additional bucket for mobile dehumidifiers that detects when it is full. The integrated scale interrupts the operation of the dehumidifier when full, thus preventing overflow.The X-Tank top can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the scale. When the bucket is full, the dryer switches off. The fill weight is preset on the included bucket (fill volume approx. 19 L), but can easily be increased or decreased as desired using the adjustment screw.The delivery includes the stand rack with scale, including power cable and a suitable 20-liter bucket, ready to use.The rack is made of metal pipes (white powder-coated) and has a stable stand.4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Scope of delivery: ready-to-use device including matching 20-liter bucketThe X-Tank was developed by us and is exclusively available from us.   warranty 2 yearsCustomer opinions on the X-Tank:"...The X-Tank with hose arrived yesterday, the installation was problem-free. We are very satisfied..." Technical dataheight 56 cmWidth 48 cm, max. device width 44.5 cmdepth 39 cmWeight 8 kgLoad capacity max. 40 kgConnection cable 2m with Swiss plug (220V/standard household socket) 

Learn more More Fewer