Here you will find a large selection of adsorption dryers for commercial and residential buildings.
Dehumidifiers with adsorption technology are suitable for keeping individual rooms or entire buildings dry, especially in cold temperatures. They can also be integrated into ventilation circuits to dry the air before it is released into the rooms.
Products
WDH TFA Contact Moisture Meter, Pinless Moisture Meter
Moisture Meter TFA Contactfor the detection of moisture in walls, ceilings, and floors. The electronic moisture indicator TFA Contact with non-destructive measurement method based on the dielectric constant/high-frequency measurement operation is an affordable, easy-to-use measuring device for quick detection of moisture. It features a digital LCD display and a flexibly usable ball probe for non-destructive detection of moisture in building materials of all kinds as well as for identifying moisture distribution in walls, ceilings, and floors.In terms of type and handling, it is very similar to the Gann Hydromette Compact B. For a quick overview of the moisture level and for detecting water damage even measured at depth, it is absolutely sufficient. The price difference compared to the Gann device mainly lies in the measurement depth (4cm for TFA Contact compared to up to 6cm for Gann) as well as in the detailed measurement in the very wet range, where the TFA Contact already shows 100% moisture at "practically fully wet," while the Gann moisture meter still differentiates in this area. A simple example: when measuring through a PET bottle, the TFA Contact shows 100% moisture while the Gann Hydromette recognizes the thin PET wall and displays a slightly lower value according to the plastic thickness. Features of TFA Contact Moisture Meter: - shock-resistant plastic- Sensor type metal spheroid- Penetration depth 20 - 40 mm- Switchable LCD backlight- Auto-off function- The measuring principle is the electrical resistance in the material.- Moisture measurements of concrete, brick walls, plaster, mortar, etc.- Max-Min Function- Hold Function- Moisture measurements without damaging the surface2 year guarantee Technical data Messbereiche: 0 - 100 digitsResolution: 1 digitPenetration depth: 20 - 40 mmMessprinzip:Device Calibration: Capacitive (Electrical Resistance)manual calibrationSensor type: Metal spheroidDisplay: LCD ScreenPower supply: 1 x 9 V block batteryDimensions (H/W/D): 200 x 48 x 34 x mmWeight: 150 gr.Warranty: 2 years
Fr. 99.00
Tecnofrigo TFT150 Adsorption Dryer with Heat Recovery
TFT Series - the premium class of adsorption"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • Stability through 4 rubber feet (abrasion-resistant and non-staining)• 2 carrying handles on the sidesDue to high demand, the delivery time is currently 6-8 weeks from the order. 2 year guarantee You can see the shipping costs in the shopping cart. Technical data Dehumidification capacity: 15.60 kg per day = 0.65 kg per hour Air volume / Pressure Process air volume blowing free: 150 m³/hPressure: 100 Pa Nominal regeneration air: 50 m³/hPressure: 100 Pa Workspace Temperature: -30 °C to +35 °CHumidity: 10 - 95% r.H. Temperature rise in the heating coil +80°CNoise level at: 1m distance 63 dB(A) 3m distance 53 dB(A) 10m distance 42 dB(A)Power connection: 1 x 230 V / 50 HzPower consumption: 1.40 kW (max. 6.9 A)Protection: 10A slowConnection cable / plug: 3m / T12 (standard household socket)Mass housing (L x W x H) mm: 335 x 375 x 420 mmDiameter hose connections: regeneration air OUT D = 80mm Regeneration air ONE D = 100mm Process air OUT D = 100mm Process air IN D = 125mmWeight: 17 kg
Fr. 8'215.60
Tecnofrigo TFT1500 Adsorption Dryer with Heat Recovery
TFT Series - the Adsorption Dryer"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • solider Stand• 4 carrying handles on the side Due to high demand, the delivery time is currently 6-8 weeks from the order. 2-year warranty You can see the shipping costs in the shopping cart. Technical data Dehumidification capacity: 304.8 kg per day = 12.70 kg per hour Air volume / Pressure Process air volume blowing free: 1500 m³/hPressure: 200 Pa Nominal regeneration air: 500 m³/hPressure: 250 Pa Workspace Temperature: -30 °C to + 35°C Humidity: 10 - 95% r.H. Temperature rise in the heating coil: +80°CNoise level at a distance of 10m: 64 dB(A)Power connection: 1 x 400V/3 / 50 HzPower consumption: 18 kW (max. 27.5 A)Connection cable / Plug Mass housing (L x W x H) mm: 1285 x 548 x 1255 mmDiameter hose connections: regeneration air OUT D = 250mm Regeneration air ONE D = 220mmx350mm Process air OUT D = 420x615mm Process air A D = 420x615mm Weight: 210 kg
Fr. 31'126.00
Tecnofrigo TFT2500 Adsorption Dryer with Heat Recovery
TFT Series - the Adsorption Dryer"Our TFT series is suitable for all areas where a constant humidity is desired. From small basement rooms to ice rinks, the TFT series offers a solution everywhere." The devices of the TFT series are equipped with two fans, unlike the ASE series. Thus, the process circuit is not connected to the regeneration circuit. The process air is taken from the room and dried before being returned to the room. Dehumidification is done through the slowly rotating drying wheel, which is coated with silica gel. Regeneration is carried out by a self-regulating PTC heating element. PTC heating elements have, in addition to their heating function, an independent temperature limiting effect. This results in a maximum level of operational safety.The TFT devices are optionally available with a heat recovery module.Characteristics• On / Off toggle switch • Hygrostat built-in • Kilowatt-hour meter • soldier Stand• 4 carrying handles on the side Due to high demand, the delivery time is currently 6-8 weeks from the order. 2 year guarantee You can see the shipping costs in the shopping cart. Technical data Dehumidification capacity: 453.6 kg per day = 18.90 kg per hour Air volume / Pressure Process air volume blowing free: 2000 m³/hPressure: 300 Pa Nominal regeneration air: 820 m³/hPressure: 250 Pa Workspace Temperature: -30 °C to + 35°C Humidity: 10 - 95% r.H. Temperature rise in the heating coil: +80°CNoise level at a distance of 10m: 66 dB(A)Power connection: 1 x 400 V/3 / 50 Hz Power consumption: 27 kW (max. 42.5 A)Connection cable / Plug Mass housing (L x W x H) mm: 1285 x 845 x 1255 mmDiameter hose connections: regeneration air OUT D = 250mm Regeneration air ONE D = 220x350mm Process air OUT D = 420x615mm Process air A D = 420x615mmWeight: 220 kg
Fr. 28'290.00
Master Thermostat Master TH5 with 10m cable
The Master TH5 thermostat allows the Master B18EPR heater fan to be controlled based on temperature. Using a stepless rotary switch, the shut-off point of the heating can be adjusted in a range between 0° to +36°C. Without this thermostat, the heater operates continuously, optionally in pure recirculation mode, with 9kW or 18kW heating power.The TH5 comes with a 10m cable as well as the appropriate plug. It can be plugged directly into the operator area on the back of the heater in the designated socket without any further device adjustments. The connection is therefore very easy and self-explanatory.Please note that the Master B18EPR is not suitable for operation in rooms above 25°C. However, the use of the thermostat is straightforward if the temperature is to be maintained in another room and the heater itself is located outside, that is, when warm air is blown into the room to be heated via a hose. Technical data Contact voltage / current 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 2 kg control area 0 - 36°C Application Stepless rotary control is plugged directly into the heater fan Cable length 10m Master Article no. 4150.112 guarantee 2 years
Fr. 95.00
Master Thermostat Master TH5 with 3m cable
The thermostat Master TH5 enables precise, temperature-dependent control of the heater Master B18EPR. Using a stepless rotary switch, the shut-off point of the heater can be set in the range of 0°C to +36°C. Without this thermostat, the heater would run continuously, with the option to choose between pure recirculation operation, 9kW or 18kW heating power. The TH5 is equipped with a 3-meter long cable and a suitable plug, allowing for straightforward installation. It can be plugged directly into the designated socket at the operator area on the back of the heater without any further adjustments required. Thus, the installation is extremely user-friendly and self-explanatory. However, it is important to note that the Master B18EPR is not suitable for operation in rooms with a temperature above 25°C. However, the use of the thermostat is possible without any issues if the temperature in another room is to be regulated and the heater itself is positioned outside of that room, for example, when the warm air is directed into the room to be heated via a hose. Technical data Contact Voltage / Current: 230V / 10 A Dimensions (L x W x H) 22 x 15 x 11 mm Weight 1 kg Control area 0 - 36°C Application Stepless rotary controlis plugged directly into the heater fan Cable length 3m Master Article no. 4150.109 Guarantee 2 years
Fr. 72.00
Aircenter Carrying bag black for infrared heating plates
High-quality, padded carrying bag made of tear-resistant polyester. Suitable for 1-3 infrared heating plates with maximum dimensions of 120cm x 65cm, for example WDH-700W from our range. The depth of the bag is 8 cm.With a sturdy carrying handle and 3-sided zipper. Available only in this size.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart. Technical dataInner dimensions: 120 x 65 x 8 cmMaterial: 1250D, tear-resistantPolyester, blackMax. load capacity: 20 kgMade in: EU
Fr. 94.00
Oasis Drip tray for Oasis dehumidifiers
Catch basin for condensate water, made of black plastic, with a threaded connection for hose coupling on the bottom side. suitable for all Oasis dehumidifiers with refrigerants R134a and R290, e.g.- Oasis 75 / 125 / 140 / 150 / 165 / 220 / 270- Krüger Airsec 75 / 75TH / 125 / 125TH / 165 / 165TH- Roth-Kippe Sonora 16 / 26 / 36- Lübra OD 125TH / OD 165TH
Fr. 22.50
Dyson Drip tray with wall protection plate for Dyson Airblade black complete set
This beautifully crafted catch tray complements hand dryers where residual water can drip down from the device onto the floor. Ideal, for example, for the "Airblade". The tray is made of ABS, black with an integrated safety device. It is available either completely with wall protection plate and wall bracket as shown here or as a spare part consisting of tray/mounting separately. "The protective plate and bracket are made of stainless steel 1.4301 (acid-resistant, non-rusting 18/10 chrome-nickel steel), electropolished." The delivery of this complete set includes the necessary screws and dowels. The tub is also available in a version made of silver-colored plastic. Developed and produced in Switzerland by AirCenter AG / Schönmann.
Fr. 199.00
Dyson Drip tray with wall protection plate for Dyson Airblade silver gray complete set
This beautifully crafted catch tray complements hand dryers where residual water can drip down from the device onto the floor. Ideal, for example, for the "Airblade". The tray is made of ABS, silver-gray with an integrated safety device. It is optionally available here complete with wall protection plate and wall bracket or as a spare part consisting of tray/mounting separately. "The protective plate and bracket are made of stainless steel 1.4301 (acid-resistant, non-rusting 18/10 chrome-nickel steel), electropolished." The delivery of this complete set includes the necessary screws and dowels. The tub is also available in an alternative version made of black plastic. Developed and produced in Switzerland by AirCenter AG / Schönmann.
Fr. 199.00
TROTEC Trotec Adapter Coupling 16A Ex
• Usable for model: TFV 100 Ex, TFV 300 Ex• Gas-Explosion protection: II 2 G EEx ed IIC T6• Dust Explosion Protection: II 2 D IP 66 T80 °C• Test certificate according to directive: 94/9/EC PTB 03 ATEX 1227• Rated operating voltage: max. 690 V• Rated operating current: 16 A• Ambient temperature: -20 °C to +40 °C• Connection: five-pole, 3P+N+PE, 6h Trotec Article No.: 6.100.005.210
Fr. 990.00
TROTEC Trotec Adapter Coupling 63A Ex
• Usable for model: TFV 600 Ex, TFV 900 Ex• Gas-Explosion protection: II 2 G EEx ed (ib) IIC T5• Dust Explosion Protection: II 2 D IP 66 T95 °C, T130 °C• Test certificate according to directive: PTB 01 ATEX 1150• Rated operating voltage: max. 690 V• Rated operating current: 63 A• Ambient temperature: -20 °C to +40 °C• Connection: five-pole, 3P+N+PE, 6h Trotec Article No.: 6.100.005.220
Fr. 2'390.00