Professional dehumidifier for demanding drying tasks, available in bucket or pump.The Fral F96 dehumidifier is a robustly built quality dryer for construction, trade, and industry. It has a very powerful performance and is also suitable as a large room dehumidifier for spaces up to 200m² (or 500m³) starting from 1°C! Relatively quiet operation.     Due to well-developed hot gas defrosting, the F96 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity areas, where the F96 still extracts water from the air, in conditions where other dryers have long stopped producing any drops (according to our tests, clearly below the threshold of 30% relative humidity).It is suitable for unattended continuous operation. The condensate can either be collected in the removable 15-liter bucket (a scale measures the weight and automatically interrupts operation when the bucket is full), or it can be drained directly via a hose connection. The F96 is mounted on 2 stable wheels and has a metal handle for easier mobility. Due to its size and the solid metal housing, it may need to be carried by two people up stairs.It is suitable:• as a construction dryer• Large area dehumidifiers for commercial and industrial use• for dehumidification of basements up to 200m2 and in case of water damage• for unattended continuous operation• for operation on a timer"When the desired target humidity is reached, the device completely shuts down. The built-in operating hour counter clearly and quickly shows how long the device has been in use."This construction dryer fits any standard 3/4-inch coupling, e.g. Gardena, etc. available from us or at your local hardware store.   dehumidification performance   Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 80 liters (60%: 54 liters) 20°C/80% r.H.: 48 liters (60%: 32 liters)15°C/80% r.H.: 31 liters (60%: 21 liters)10°C/80% r.H.: 26 liters (60%: 19 liters)5°C/80% r.H.: 19 liters (60%: 7 liters)(r.H.=relative humidity)2 year guarantee   Technical data Voltage: 230V / 50HzPower consumption: max. 1350W / 980W (at 20°C/60% r.H.)Sound pressure level: 1 m distance 55 dB (A) (our measurement) / 2.5 m distance 53 dB(A) (manufacturer's specification)Dehumidification capacity: 80 liters/day (30°C / 80% r.H.) Air volume: 550 m³/h (built-in) 780 m³/h (free-blowing)Condensate tank: approx. 15 litersCompressor:Rotary Compressor refrigerant: R407cDimensions (H/W/D): 113 x 67 x 77 cmWeight: 54 kgOperational setting: HygrostatAmbient temperature: 1°C ~ 35°CApplication area: up to 200m² (heated rooms) or 150m² (unheated)Swiss plug: Yes  Hose connection: YesOperating hour counter: YesWarranty: 2 yearsSeries: Fral FDNP96SHEAN Codes: 0745114671578 F96 with bucket CH plug0745114671585 F96 with pump CH plug

Learn more More Fewer

The top dryer for larger spaces. The FDK performs reliable heavy-duty work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round drying of garages, industrial halls, or in water management facilities. You can only get this model from us; comparable products on the market cost twice as much.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% r.H.: 80 liters / 24 h20°C/80% r.H.: 45 liters / 24 h20°C/60% r.H.: 30 liters / 24 h10°C/60% r.H.: 18 Liters / 24 h(r.H.=relative humidity)Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards) Smaller versionThe device is also available in the smaller version "FDK44" -> DetailsComparable devices: Lunor L75     Technical data  Tension 230V / 50Hz Power consumption 1020W (at 20°C/60% r.H.), max. 1550W Sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% r.H.)  amount of recirculated air 1100 m³/h (installed, free-blowing approx. 1350 m³/h) condensate tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R410A Dimensions (L x H x D)  73 x 58 x 58 cm Weight 48 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C  Area of application bis 250m²/1000m³ Swiss plug Yes   hose connection Yes guarantee 2 years      

Learn more More Fewer

The top dryer for medium-sized rooms and for rooms with high humidity levels. The FDK provides reliable dehumidification work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round dry storage of single or double garages, archive rooms, basement areas, or also for stabilizing humidity in laundry and drying rooms. You can only get this model from us; comparable products on the market are significantly more expensive.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK44 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 36 Liters20°C/80% r.H.: 18 Liters20°C/60% r.H.: 14 Liters10°C/60% r.H.: 8 Liters(r.H.=relative humidity) Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards)Stronger versionThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Fral Horizon FDK44 Tension: 230V / 50Hz Power consumption:  max. 780W / 530W (at 20°C/60% r.H.) Sound pressure level:  (our measurement) 1 m distance 53 dB(A) 2.5 m distance 51 dB(A) Dehumidification capacity: 36 liters/day (30°C / 80% r.H.)  air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) condensate tank: No tank / only hose connection possible Compressor:     Rotary compressor  refrigerant:   R410A (650gr.) Dimensions (L/H/D):      58 x 44 x 36 cm (including feet and carrying handles) Height without feet and carrying handles: 37 cm Weight:    34 Kg Business closure: Hygrostatrad Ambient temperature: 1°C ~ 35°C  Application area: up to 100m² Swiss plug:  Yes   hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

This front is the latest version with enhanced fire and explosion protection.The design of the front has been further developed and significantly improved in connection with the introduction of the new, more environmentally friendly refrigerant R290. However, it is also compatible with all older models using refrigerant R134a since the 2005 model year. The installation takes hardly longer than with the old design and is easy to understand.scope of delivery- Front made of plastic- Fire protection specialist made of plastic- Metal bracket for hygrostat and alarm light with required screws- neutral front sticker with moisture scale- 4 smaller connection cables  Not included in the delivery- alarm light- Hygrostat (Humidity Controller) suitable for all Oasis dehumidifiers with refrigerants R134a and R290, e.g.- Oasis 75 / 125 / 140 / 150 / 165 / 220 / 270- Krüger Airsec 75 / 75TH / 125 / 125TH / 165 / 165TH- Roth-Kippe Sonora 16 / 26 / 36- Lübra OD 125TH / OD 165TH

Learn more More Fewer

AERIAL joint cross system FK38 mm for dry air supply in cases such as water damage remediation. Applicable when tiles or natural stone slabs with joints are laid on the screed. The nozzles require 6 mm drill holes in the joint cross. This approach allows for nearly non-destructive drying. Technical dataSpecifications for hose inner diameter: 38mm

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The active electrode B 50 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds. It detects the moisture distribution in ceilings, walls, concrete, and other set building materials.   The following measurement ranges are covered by the B 50• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via tableSuitable base devicesThe electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in dealing with moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a supplement to a wood moisture measuring device. If you are looking for a moisture measuring device with simpler handling, please consider our handheld devices "Hydromette Compact B" and "Hydromette BL Compact B2", which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 31003750 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

The active electrode B 60 is a sensor for measuring building moisture. It operates with a capacitive high-frequency measurement and measures non-destructively in solid materials of all kinds."It detects the moisture distribution in ceilings, walls, concrete, and other set building materials. The basic function is the same as that of the probe B50; additionally, the B60 features a built-in limit value setter from 20 – 140 digits and an acoustic signal generator."   The following measurement ranges are covered by the B 60• 0 - 199 Digits (Scan area), moisture qualification via table• 0.3 - 8.5 wt.%, conversion depending on building material via table• 0.3 - 6.5 CM-%, conversion depending on building material via table Suitable base devices The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette HB 30• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2  The use of the device as well as the evaluation of the data requires some knowledge in moisture measurement. Therefore, the device is particularly suitable for climate technicians, water damage specialists, insurance companies, and as a complement to a wood moisture measuring device. If you are looking for a moisture measuring device with easier handling, please consider our handheld devices, which are also available with good precision and at a significantly lower price.The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.    Technical data  Gann Article No.: 31003760 Depth effect: up to max. 120 mm Measuring range: 0 - 199 Digits (Scan area), moisture qualification via table 0.3 - 8.5 wt.%, conversion depending on building material via table '0.3 - 6.5 CM-%, conversion depending on building material via table' Guarantee: 2 years

Learn more More Fewer

Ideal case for storing and transporting Gann measuring devices such as hydrometers and Hydromat CM devices. With specific inlays and padding.For storage / for transport of GANN hydrometers + accessories with specific inlays and padding. • For all Classic or BL hydrometers• Designed for a measuring sensor and various resistance-based electrodes The manufacturer Gann from Germany is one of the leading producers of high-quality moisture measuring devices. Gann measuring devices are very commonly used by professionals in construction drying. An ideal companion on construction sites for construction managers, architects, and floor layers.     scope of deliveryThe delivery includes the padded but unfilled case without devices.   Technical data  Gann Article No.: 31005061 Length: 0.437 m Width: 0.379 m Height: 0.100 m Weight: 1.530 kg

Learn more More Fewer

Ideal case for storing and transporting Gann measuring devices such as hydrometers and Hydromat CM devices. With specific inlays and padding.The delivery includes the padded but unfilled case without devices. • For all Classic or BL hydrometers• Designed for up to three measuring sensors and various resistance-based electrodes The manufacturer Gann from Germany is one of the leading producers of high-quality moisture measuring devices. Gann measuring devices are very commonly used by professionals in construction drying. An ideal companion on construction sites for construction managers, architects, and floor layers.  Technical data  Gann Article No.: 31005062 Length: 0.497 m Width: 0.411 m Height: 0.120 m Weight: 1.910 kg

Learn more More Fewer

The replacement measuring cable Gann MK13/II is a universal spare part for Gann measuring probes, which are connected to the Hydromette Classic measuring devices."It is compatible with B50, B60, LB70, MB35, MH34, IR40EL, RF-T28, RH-T37EL as well as with all PT100 temperature sensors."Important: the cable is not ready to plug in, but the wires must be soldered to the corresponding connections when replacing.   "Factory-wise, the individual wires of the current series are connected to these poles (IMPORTANT: we do not guarantee that this arrangement is correct for your device!)."1 braun2 weiss3 rosa4th degree5 yellow6 green7 blue 

Learn more More Fewer

Fast, precise moisture meter for detecting moisture in walls, ceilings, and floors. With this easy-to-use pocket-sized quick moisture indicator, you can quickly and reliably track your drying progress on construction sites or during the remediation of water damage.The electronic moisture indicator operates using a non-destructive measurement method based on the dielectric constant/high-frequency measurement principle. It has a spherical probe for detecting moisture and moisture distribution in solid building materials such as walls, ceilings, and floors (suitable for measuring wood only to a limited extent and as an indicator).Application"First, the desired material is selected on an LCD display and saved by pressing a button. Then, the metal ball is held at a right angle to the material to be measured, and the measurement button is pressed briefly. The result is immediately visible."   Handling of a ball measuring electrode  It is important to have a 90° angle to the measurement object as well as the correct positioning of the hydrometer/electrode. To avoid any influence from the hand of the person measuring, the electrode may only be covered by the hand on the rear half during the measurement and control process. The front half (display/sphere) of the device must remain free.       Proper handling of the device: Always hold the device firmly at the lower part of the housing during measurements:     Incorrect handling of the device: When measuring, the hand affects the measurement field of the ball electrode and thereby alters the measurement value.      Selectable Material Table• Display in digits• Cement screed in weight %• Anhydrite content in weight %• Concrete in % by weight• Cement mortar in weight %• Lime mortar in weight %• Mischputz in Gew %• Gypsum plaster in % by weight• Cement screed in CM %• Anhydrite screed in CM %• Gipsputz in CM %• Lime mortar in CM %• Cement mortar in CM %• Mixed plaster in CM %• Beton in CM % Weight %: The material moisture in weight percentages (also solid moisture) indicates the absolute proportion of free water contained in a solid in %. Values in the range of 0.2 - 0.3 % indicate dry materials.CM %: The displayed CM value simulates the extraction and measurement of a material sample in the manometer, where the sample is mixed with calcium carbide. This produces a gas, the pressure of which is measured. Depending on the material density, the value is very similar to weight %. For anhydrite, 1 weight % = about 1 CM%. For concrete floors, the CM value deviates more significantly: 1 weight % = about 1.5 CM%. Dry concrete floors/walls should have CM values below 2.0% (calcium sulfate or anhydrite screed: below 0.3%).Thus, the weight percentages are the more easily understandable value for non-specialists.Advantages and Features• Handy moisture meter in pocket format for quick individual and series measurements• For each building material, a limit value can be individually set, exceeding which an acoustic warning signal will sound.• Scan mode (1 - 199.9 digits) or direct display of moisture values in % by weight or CM-% for building materials, resolution: 0.1 %• Characteristic curves for 7 types of building materials• Min, Max, and Hold function for the measured values• Automatic calibration when the device is turned on• The device is delivered complete with a 9V battery and plastic box.Improvements compared to the previous Hydromette BL Compact BThe BL2 is the further development of its predecessor Gann Hydromette BL Compact B.• Longer measuring probe for more comfortable application• Significantly stronger high-frequency measurement field for greater penetration depth into the building material• Finer measurement resolution now from 0-199 digits for an even more precise delineation of moist areas, which was previously only possible with significantly more expensive measuring devices.• the direct display of the CM % has been expanded to include several building materials. The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data   Gann Article No.: 30012032 Measuring range:   0 – 199.9 Digits (Scan Range) 0.3 – 6.0 wt.-% or 0.3 – 4.0 CM-% measuring depth: max. approx. 6 cm Advertisement: Device/ambient temperature Trend indicator: hardwood and softwood Max-Hold function: Yes Alarm function: Acoustically Calibration: Automatically Device shutdown: Automatically Single or series measurements: In seconds Power supply: 9-V-Block battery (included in delivery) Dimensions (L x W x H): 190 x 50 x 30 mm Weight: 180 gr. Special features: No separate electrodes or cables required Ideal pre-testing device for all CM devices Guarantee: 2 years                      Further Gann measuring devices "We are an official sales outlet for Gann measuring devices in Switzerland and can offer you all Gann articles under advantageous conditions, for example: Gann Hydromette HB30, HT65, HT85 T, UNI1, UNI2, RTU600, CH17 and many more."

Learn more More Fewer