The top dryer for medium-sized rooms and for rooms with high humidity levels. The FDK provides reliable dehumidification work in both cooler and temperate rooms.
The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round dry storage of single or double garages, archive rooms, basement areas, or also for stabilizing humidity in laundry and drying rooms. You can only get this model from us; comparable products on the market are significantly more expensive.
Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.
The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.
The condensate is drained directly through the hose connection. The FDK44 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.
The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.
The FDK is suitable
• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements
• for wall mounting or directly on the ceiling
• for continuous dehumidification of temperate but also cold rooms from 1°C
• for unattended continuous operation
• for operation on a timer
dehumidification performance
The dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 36 Liters
20°C/80% r.H.: 18 Liters
20°C/60% r.H.: 14 Liters
10°C/60% r.H.: 8 Liters
(r.H.=relative humidity)
Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:
• 2 wall consoles for mounting on a wall (total Fr. 68.-)
• Hose coupling
• Hose
• Condensate pump (if the condensate needs to be pumped upwards)
Stronger versionThe device is also available in double strength as "FDK100" ->
DetailsComparable devices: Lunor L25
