Practical chassis, suitable for the tumble dryers     Krüger Secomat 2 (Art. 396.01 / 396.03) Krüger Secomat 4 (Art. 397.01 + 397.03)Krüger Secomat 75 (Art. 386.01)Krüger Secomat 75H (Art. 386.04)   The rolling frame is made of sturdy metal and features 4 wheels, 2 of which have brakes. It is ideal for situations where the dryer cannot be mounted directly to the wall, or when the device is used in different rooms. At the bottom, there is a metal plate on which the bucket for the condensate can be placed. All the necessary mounting materials for the Secomat are included in the delivery of the dryer.     Technical data Material: metal, stainless Weight: 13.4. kg Masse H x B x T: 1267 x 520 x 740mm

Learn more More Fewer

Practical chassis, suitable for the tumble dryers Krüger Secomat 400 (Art. 380.01/without heating) or Secomat 400H (Art. 380.04/with heating).   The rolling frame is made of sturdy metal and features 4 wheels, 2 of which have brakes. It is ideal for situations where the dryer cannot be mounted directly to the wall, or when the device is used in different rooms. At the bottom, there is a metal plate on which the bucket for the condensate can be placed. All the necessary mounting materials for the Secomat are included in the delivery of the dryer.  Technical data Material: metal, stainless Weight: 27 kg Masse H x B x T: 1267 x 1239 x 800mm

Learn more More Fewer

The Fral FDNF62 dehumidifier is a robustly built quality dryer for commercial, industrial, garages, and basements. It has a powerful performance and is suitable for rooms starting from 1°C! Relatively quiet operation.Available in two versionsa) With bucketfor private, construction, industry with non-acidic air, with large bucket and direct hose connection b) My Pumpfor private, construction, industry with non-acidic air, with pump (delivery height 4 m) and direct hose connectionBoth versions are available on request for an additional charge of Fr. 300.- with a special coating for use in acidic air, e.g. swimming pools (chlorine/bromine, water surface up to 30m²), dairies, industry. Due to well-developed hot gas defrosting, the FDNF62 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity areas, where the FDNF62 still extracts water from the air, while other dryers have long stopped producing any drops (according to our tests, clearly below the threshold of 30% relative humidity)."It is suitable for unattended continuous operation. The condensate can be collected in the large 12-liter bucket or discharged directly with the hose (3/4" thread) depending on the chosen version."The FDNF62 stands on 4 stable wheels and has side carrying handles for easier mobility. Due to its size and the massive metal housing, it may need to be carried by two people up stairs. Highly recommended in terms of quality.It is suitable- Dehumidifiers for commercial and industrial use- for the drying of basements and garages up to 130m²- for drying water damage- for unattended continuous operation- for operation with a timer"When the desired target humidity is reached, the device completely shuts down. The built-in operating hour counter clearly and quickly shows how long the device has been in use."Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 52 Liters20°C/80% r.H.: 27 Liters20°C/60% r.H.: 19 liters10°C/60% r.H.: 10 Liters(r.H.=relative humidity)   "Due to the transition to a new, environmentally friendly refrigerant, this model is being technically revised and is temporarily unavailable. The new version will be more efficient. It will also have both a bucket and a connection for an optional pump. Thus, the decision of which version to choose is eliminated. If you are interested, we would be happy to inform you about the expected availability / delivery time."   Technical Data (old version)  Tension 230V / 50Hz Power consumption max. 950W / 700W (at 20°C/60% r.H.) Sound pressure level 1 m distance 54 dB(A) (our measurement) 2.5 m distance 52 dB(A) (our measurement) dehumidification performance 52 liters/day (30°C / 80% r.H.)  amount of recirculated air 600m³/h condensate tank 12 liter water tank and hose connection or Condensate pump and hose connection Compressor Rotary compressor  refrigerant R407C (650gr.) Dimensions (H x W x D)    including wheels 79 x 45 x 42 cm Weight   44 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C Area of application up to 130 m² or 390 m³ Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years

Learn more More Fewer

Airwell window air conditioning unit WFAE with 2.75 or 3.7 kW nominal cooling capacity and refrigerant R32. The window air conditioning unit WFAE, available in two power levels, is simply pushed into a correspondingly prepared window or wall opening. In addition to cooling, the unit also offers a dehumidification function. The devices operate with energy-efficient inverter technology and the latest, specially environmentally friendly refrigerant generation R32. Operation is done directly on the inside of the unit or via the included remote control. During installation, the unit should ideally be supported on the outside by steel beams (energy efficiency class A). The unit is supplied with a Schuko power cable and a fixed adapter Schuko - T12.

Learn more More Fewer

The compact air conditioning units "WFD" from AIRWELL are quickly installed. Essentially, the units are pushed through wall openings or appropriately prepared windows. One side extends into the room to be cooled, while the other typically blows the extracted heat outside, but it can also be directed into an adjacent room. With these window air conditioners, rooms can be cooled, but they can also be used solely for dehumidification if needed. The side with the operator panel faces into the room, with only a short part of the device protruding from the wall. This side also contains the air intake area with the inserted filter as well as the outlet for the cooled air. The part that extends outward, on the other hand, is somewhat longer and should be supported by a console or a bracket. The device has two air circuits: One refers to the interior space. It draws in warm room air and blows cooled air into the room. The second circuit is located in the outdoor area, where it draws in outside air to release the waste heat outside.The operation can be carried out either via the keyboard on the device itself or via the infrared remote control included in the delivery. A display shows the values.Functions of the operator panel• On/off switch• Setting of the desired operating mode (only recirculation, dehumidification, or air conditioning)• Setting the desired target temperature using the up/down arrow keys in the range between 16°C and 30°C.• Setting of the desired ventilation level 3-stage + auto program• Setting whether the air outlet louvers should swing vertically or remain stationary (horizontal alignment can be adjusted manually)• Duration limitation with timer, half-hourly up to a maximum of 24 hoursDrainage of condensate water"During cooling/dehumidification, moisture is removed from the air. This accumulates as condensate in the device. There are two selectable options for drainage:"a) As standard, water drips over the condenser coils (the warm part of the heat exchanger in the device) and automatically evaporates with the blown warm air. This solution is generally used as it simultaneously increases the cooling performance. However, it may cause a slight background noise.b) the water is drained through the existing hose connection, thus not evaporated. Converting to this solution requires opening the housing, but can be done in a relatively short time. This solution causes hardly any additional noise.operating noiseThe operating noise primarily depends on the selected fan speed. The stronger the ventilation, the more noticeable the operating noise is. Compact air conditioning units are significantly more pleasant in terms of volume, unlike mobile air conditioning units with exhaust hoses, but they are not comparable to fixed installed split air conditioning systems.Air filterIn the intake area of the air, a filter is inserted, which should be cleaned occasionally. The filter serves to ensure that as little dirt as possible accumulates in the device and also to prevent dust from being blown into the room. There is an LED light on the control panel that appears after every 250 operating hours to remind you to clean the filter.memory function"After a power failure, the WFD automatically resumes work with unchanged settings."Further informationInverterInverter technology is more economical because the compressor only runs with as much power as is currently needed, while conventional devices either operate at full power or not at all. In terms of operating noise, inverter devices are usually quieter as well, because full power is rarely called upon.Power supplyThe power supply is provided from the interior. A normal household socket is sufficient.angle of inclinationDuring installation, the back of the unit should be tilted a few millimeters downwards to avoid noise or vibrations.Refrigerants of the latest generation"With us, you will receive the latest series with R32 (propane) refrigerant. R32 is one of the most environmentally friendly refrigerants on the market and has a significantly lower environmental impact, approximately 600 times less than previous refrigerants."  scope of delivery- Compact air conditioning unit WFD in the desired strength with cable and plug- remote control- Operating instructions and service manualTechnical data     WFD009-C11   WFD012-C11   operating modes Cooling, Dehumidifying, Only Recirculation For rooms up to max. 30m² 40m² Cooling performance 2750 W 3700W connection voltage 1P/230V/50Hz insurance 10A Setting range temperature 16° - 30° C Power consumption 810 W 1090 W dehumidification performance 1.0 L/h 1.2 L/h Kühlmittel R32 / 510g R32 / 630g Operating noise at a distance of 1m Manufacturer specification fan speed 1 / 2 / 3 45 / 47 / 49 dB(A) Air circulation (Level 1 / 2 / 3) 310 / 350 / 380 m³/h 400 / 450 / 490 m³/h service Operator panel or remote control Mass (HxWxD) 375 x 560 x 710 mm 428 x 660 x 700 mm Weight indoor / outdoor unit 34 kg 46 kg guarantee 2 years

Learn more More Fewer

With this moisture meter, moisture in walls, masonry, floors, and wood can be measured easily. The process is non-destructive, as the device measures 2 cm deep using a sensor. It has a digital LCD display with backlighting as well as an easy-to-understand LED bar graph. The operation is incredibly simple – turn on the device and place it on the object to be measured. The measured moisture is displayed immediately. This allows you to quickly detect moisture and reliably monitor the drying progress.The measuring sensor on the back of the device is approximately 4 x 4 cm in size. The displayed value corresponds to the average humidity measured over this area. This results in a more balanced outcome than with a pure point measurement.No indirect measurement possible: the sensor must be placed directly on the material to be measured. For example, it cannot measure through wall or floor panels or through laminate/ parquet into the substrate underneath.Features and Benefits• Moisture display as LCD value and also as LED bar graph• Measure unsealed materials and surfaces such as walls, ceilings, floors, masonry, and wood.• Four different measurement modes selectable: hardwood, softwood, masonry, and walls (ceilings/floors).• Gentle moisture measurement without damaging the material surface• Lightning-fast single or series measurements• Housing made of shock-resistant plastic• Auto-calibration and holding (freezing) of the measurement value• Acoustic alarm for measurements outside the measurement range• Auto shut-off after 2 minutes of inactivity• No separate electrodes or cables required• Warning symbol for low battery (Battery warning indicator)• Illuminated display field• Ideal pre-testing device for all CM devices   application examples• Damage restoration and moisture localization• Shell construction / new construction or monitoring of the drying progress• Wood processing• Insurance industry"A 9V block battery is required for operation. This is already included in the delivery."  Technical data   Measuring ranges: 0% ~ 53% softwood               0% ~ 35% hardwood                    "Results of walls, ceilings, floors, and partitions correspond to the displayed relative values." Power supply:           Power consumption:             9 V Battery Penetration depth: 20mm accuracy ± 4% Application area: 0 ~ 40° C and 0 ~ 70% r.L. Advertisement: LCD-Display Power supply: 1 x 9 V Block Battery Dimensions (H/W/D):      170 x 75 x 30 mm Weight:    186 g (with battery) Guarantee: 2 years

Learn more More Fewer

"Fits all 3-pole plugs according to EU standards, e.g. Shuko/Germany, etc. The fixed adapter is pressed as an intermediate plug onto the existing foreign plug and cannot be removed without damage."CEE7/VII - CH Typ12for devices up to a maximum of 10A permitted"We also carry the reverse version in our range, for Swiss devices that are to be connected to European sockets."

Learn more More Fewer

A practical helper in the laundry room at a comfortable working height. Ideal for drying towels, T-shirts, underwear, etc..In contrast to the "Wall" models, the "Fold" is fixed to the wall and its height is not adjustable. However, it can be folded up to save space when not in use.The load capacity is 10 kg. Thus, it can also easily carry a line with dry or tumbled laundry.Characteristics• Wall-mounted laundry hangers, foldable• Fixed to the wall with 4 points• 8 tubes made of anodized aluminum, resistant to time and moisture. Ideal for indoors and outdoors.• High quality at a low price• Made in Italy 100% Dimensions (L x W x H): 60 x 57 x 9 cmTotal length of pipes for hanging laundry: 4.8 meters "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer