The professional, large drying cabinet for intensive use. It is built to a very high standard and is ideal for large drying quantities. For example, for the quick drying of work clothes, firefighting gear, laundry in the gastronomy and hotel sector, but also in private households that appreciate the comfort of faster laundry drying. The capacity is approximately 6 kg of laundry and dries it in about one hour. This corresponds to roughly one washing machine load per hour.Unlike a conventional tumble dryer, cabinet dryers do not cause wear and tear on textiles. The laundry is gently permeated by a stream of air and dries similarly to how it would outside in the garden. The dry air is distributed laterally through several exhaust openings inside the cabinet, ensuring that the laundry dries evenly.The humid air condenses on a cooling element (similar to a dehumidifier or Secomat) and is discharged through a hose. The dehumidification element is located in the upper part of the cabinet, so that the extracted water can be easily directed to a lower drain or a sink. The included hose is 3m long. Due to its high dehumidification power, the FT120VP does not have a condensate tank, unlike the smaller version "Ecodryer 2.0."The drying process takes place autonomously inside the cabinet. A supply of fresh air is not required. This also means that no moisture is released into the room air, which is particularly advantageous in cooler basements (no odor and mold formation due to excessive room humidity).The operation itself is remarkably simple: with the press of a button, you can choose between damp and cupboard dry. The preset, recommended values can be changed at any time to personal preferences. When the laundry is dry, the device turns off. The operating noise is noticeable at 55 dB(A), but in a lockable room, it is not further disturbing. The control panel is available in various languages, including German, French, English, and the Nordic languages.The interior inventory of the wardrobe dryer consists of 4 swing-out forks, each with 5 rods, which can be directly hung with laundry or hangers. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate. If the wardrobe is used exclusively for drying jackets and coats, the lower three holders can theoretically be cut off, so that only the top holder can be hung with hangers.Newest generation!The drying cabinets differ from earlier models in that they do not rely on conventional resistance heating, but rather on the latest heat pump principle. This reduces operating costs compared to earlier models by 50% or more. Only the waste heat from the compressor is used for the internal temperature regulation of the cabinet. With this technology, consumption has been reduced to 0.35 kWh per kg of laundry. A drying process takes about 1 hour, depending on the load and moisture content of the laundry.Maintenance Drying CabinetAbove the laundry is the air filter, which keeps the air inside the cabinet clean during drying. This filter is inserted and can be easily removed for cleaning. It consists of a frame and a filter mesh with high cleaning efficiency. The filter is reusable.   power connectionThe drying cabinet is delivered as standard without a power cable. It operates on high voltage (400V / 3 phases / 2300W) and should be professionally connected directly by an electrician or equipped with a suitable cable/plug. The Ecodryer is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux, among others. It is produced to order and imported, with a delivery time of approximately 4-5 weeks. It is delivered in two parts or on two pallets.At our AIRCENTER in Baden, you can view the cabinet in the exhibition and get advice if you have any questions.  Technical data  Dimensions H x W x D    2059 x 1195 x 658 mm  Weight 189 kg Protection class IPX4, CE certified refrigerant R407C / 925g capacity 18m drying rodsNormal filling quantity approx. 6-8 kg operating noise 55dB(A) power connection 400V 3N AC 50Hz, 10A slow Recording 2300W topping performance approx. 6 kg laundry per hour Power consumption approx. 0.35 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German  User manual English

Learn more More Fewer

Thermostat plug for controlling dehumidifiers, air conditioning units, and heatersThe external hygrostat plug DST interrupts or allows current depending on the room temperature (functioning similarly to a timer, but temperature- not time-dependent). This allows you to automatically turn off dehumidifiers as soon as the room temperature becomes too cold (min. 5°C) or switch to the reverse function at the push of a button to control heating when the room temperature is too low (maximum 3680W).By pressing a button, it can be selected whether the plug allows power when the temperature is higher than the set value (application example: dehumidifier, air conditioning units) or when the temperature is lower than the set value (application example: fan heater, frost guard, etc.).Advantages of the thermostat plug DST:1. Protection against icing of dehumidifiers in unattended operation in cold or highly fluctuating temperature environments2. Temperature regulation of fan heatersFunctioning of the control of dehumidifiers:The thermostat plug DST displays the room temperature. In dehumidification mode, you enter the desired minimum temperature to which your dehumidifier is set. If the current temperature is lower, the power is interrupted and the dehumidifier pauses until the room temperature rises again (lowest selectable value 5°C). Once the minimum temperature is reached, the plug supplies power to the dehumidifier again, allowing it to resume operation.Functioning of the control of heating fans:The Hygrostat Plug DST displays the room temperature. In heating mode, you enter the desired minimum temperature that must not be fallen below in the room (lowest selectable value 5°C). If the current temperature is lower, the plug continues to supply power to the heater until the desired target temperature in the room is reached."Why does the control usually only work with dehumidifiers that have manual control?""Dehumidifiers with electronic control fall into standby mode during a power interruption (except for some industrial devices with memory function) and must be restarted after the power interruption. Therefore, the DST plug is not suitable for these models. In contrast, dehumidifiers with manual/mechanical control (identifiable by a standard rotary switch) resume operation with unchanged settings, as before the power interruption (e.g., via timer or thermostat plug)."Important: Please read the enclosed operating instructions before commissioning, especially so that you can recognize in which mode the plug is located, i.e. whether it is supplying power at a higher or lower temperature than the set value.Shipping costs for 1 item: Fr. 10.- 2 year guarantee Technical data   Voltage: 220V-240V / 50HzPower consumption max: 16 A / 3680 WattDimensions (H/W/D):      11 x 6 x 5.7 (without power poles) cmWeight: 130 gr.Operational shutdown: precise input by key press / digital displaySelectable range: 5-30°CMeasurement accuracy: +/-1°CMessage interval: every 10 secondsAmbient temperature: -10°C ~ 70°C (does not correspond to the selectable setting)Swiss plug: Yes  Warranty: 2 years

Learn more More Fewer

Condensate bucket incl. floatsuitable for dehumidifiers Aerial AD 560 AD 660 AD580 AD680 Mass 372 x 265 x 234 mmCapacity 14 litersMaterial plastic black 

Learn more More Fewer

spare parts Akto521suitable for all device model years Akto521 and WDH-520HB from 2008 to 2022. The bucket also fits the current series WDH-520EB, but the float does not.   Scope of delivery: Replacement bucket with float. "If you only need the float, it can also be ordered here in our shop. The float itself is clicked into the bucket and can be changed very easily."   Technical dataWeight: 0.8kg 

Learn more More Fewer

Water bucket with plastic inlet pipe for Bora 208/210Capacity 14 L with content scale in 1-liter increments. As suitable accessory for Bora air dryer, if the condensate cannot be drained directly via hose. Clean solution that directs the water directly into the bucket and prevents splashing back from the bucket. Important: Enema tube fits models Bora 208/208H, 210/210H(larger models 315/315H and 520/520H have separate inlet pipes with different curvature).   Inlet pipe without bucket   Technical data   inlet pipe:Plastic, gray, suitably curved for wall mounting, length 74cm (stretched 76cm)

Learn more More Fewer

Powerful 15kW heater for heating larger rooms. Solid metal housing with rack, easy to transport. The blower has a high air circulation volume, which distributes the heat more widely in the room. The device is also suitable for continuous operation on construction sites and for heating large rooms, halls, and tents.  execution• Robust metal housing black• Safety-insulated carrying handles• Room thermostat• Safety thermostat, protects against overheating Miscellaneous• A five-pole 32 A high-voltage connection 380V/415V (50/60Hz) with CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating. Technische data Tension: 400V / 50 Hz Power consumption: 4 levelsOnly Ventilation / 5 kW / 10 kW / max. 15 kW Protection max.: 20.7 A Room thermostat: 4 - 40 °C air volume flow: 1350 m³/h Protection class: IP44 Operating noise: 1 m distance 54 dB(A) (our measurement) Dimensions housing (H/W/D) 44 x 36 x 33 cm Dimensions with rack (H/W/D): 51 x 41 x 33 cm Weight: 18 Kg Business closure: rotary wheel Application area: up to max. 150 m² Plug: CEE 32 A Guarantee: 2 years     How much heating power do I need? As a rough rule of thumb, for closed rooms with normal ceiling height (2.5 m), approximately 1 kW of heating power is required per 10 m². This value depends on insulation and cold load in the room.

Learn more More Fewer

A compact electric heater fan from the brand Ekström. Ideal for heating smaller rooms up to 20m² at construction and industrial sites, but also for warming private hobby rooms and basements. Take advantage of currently very favorable prices for heater fans. These heater fans are all equipped with a cable and plug, making them ready for use immediately.Characteristics• Robust metal housing (Color: black)• Safety-insulated carrying handles• Room thermostat• Safety thermostat (protects against overheating)• with 1.8m connection cable and CH plug 230 V (standard Swiss socket, 3-pole)."After reaching the target temperature, only the fan (28 W) operates to prevent overheating of the device. Heating is selectable in 2 stages: 1000 / 2000 W." How much heating power do I need?As a rough rule of thumb, for closed rooms with normal ceiling height, approximately 1 kW of heating power is required per 10 m2. This value depends on insulation and cold drafts in the room. Technical data Tension 220V-240 V / 50 Hz Power consumption 2 stages 1 kW / 2 kW (+ recirculation mode without heating) Protection min. 8.6 A room thermostat 4 - 40 °C air volume flow 300 m³/h Protection class IP44 operating noise 1 m distance 51 dB(A) (our measurement) Dimensions (H x W x D)    34 x 24 x 25 cm Weight 4.2 Kg cessation of operations rotary wheel Area of application up to max. 20m² Swiss plug Yes   guarantee 2 years

Learn more More Fewer

These robust, industrial fan heaters are equipped with a durable metal housing and are designed for floor-standing use. Thanks to the practical carrying handle and the sturdy rack, they can be easily transported and used flexibly. The operation of the device is incredibly simple: The function switch allows the heating power to be set to either half or full power, and an exclusive fan operation is also possible. An integrated room thermostat ensures a constant temperature by automatically turning off the heating when the set value is reached and keeping the fan running for continuous air circulation. These space heaters are extremely versatile and are ideal for a wide range of applications, including construction heating, garages, workshops, storage rooms, retail spaces, greenhouses, sports and factory halls, as well as many other areas of use.Execution of this heating blower• Robust metal housing• Safety-insulated carrying handles• Room thermostat• Safety thermostat, protects against overheating• Incl. 1.4 m connection cable• Incl. CEE plug 5-pole 16 A (corresponds to Swiss standard)Technical data Heating output 9kW Steps only recirculation / 4.5 kW / 9 kW Air volume 670 m³/h Room thermostat continuously variable 0-40°C Sound level 52 dB(A) at a distance of 2.5m Masse (H x B x T)   490 x 355 x 300 mm Weight 9.6 kg Recording max. 12.4 A Connection 400V / 50Hz Cable / connector approx. 1.4m Q2.5mm² + EURO CEE16A Test certificates THIS Protection class IP44 Guarantee 2 years  

Learn more More Fewer

Burg Super descaling cartridge for Burg Duracraft Honeywell ultrasonic humidifiers BH-860E / BH-861E / BH-862E BH-870E / BH-871EShipping costs for 1 item: from Fr. 10.- (Basic B-Post, further shipping options can be found in "My Cart").Quantity discount heading "Humidifier Spare Parts" (including mixed items):5% discount on 2 items, 10% discount on 3 or more items Technical dataLifespan of the descaling cartridge at 0 - 10° dH approximately 5 monthsLifespan of the descaling cartridge at 10 - 15° dH approximately 3 months

Learn more More Fewer

Combined EPA - Activated Carbon Filter Combination (E11) suitable for Air Purifier WDH-H600A. The replacement is easy and occurs when the already installed filter can no longer fulfill its function.ParticleThe EPA is a high-performance particulate filter (EPA = Efficient Particulate Air filter) with a purity rate of 95%. It captures particles up to 0.001 mm in size. This filter can be used in addition to the HEPA and activated carbon filters in the device to enhance the result with each pass of air through the device, or it can also be used as a standalone filter against odors and particles. Its purity rate is slightly lower than that of the HEPA filter (0.0003 mm). It provides supportive virus protection, but is not equally protective as the HEPA H13.odors/fumesAbsorbs and cleans many types of smoke and odors (e.g. cigarette smoke) and also helps to break down toxic vapors, gases, and solvents (e.g. formaldehyde, benzene, ammonia, sulfur, etc.).This combination filter is ideally placed in the lowest filter compartment of the device, that is, after the coarse dust filter (pre-filter) but before the fan. In this way, it protects the motor from contamination and reduces the amount of particles that would otherwise only be filtered out by the subsequent HEPA H13 filter. Since the HEPA H13 filter is more expensive than the pre-filter, this combination makes sense and extends the maintenance interval, that is, the time until the next filter change is due.Minimum order quantity 1 piece.

Learn more More Fewer

The tub is made of black ABS plastic, the safety bracket is made of stainless steel 1.4301 (acid-resistant, non-corrosive 18/10 chrome-nickel steel), electropolished. Also available as a complete set with wall protection plate.

Learn more More Fewer

The tub is made of silver ABS plastic, the safety bracket is made of stainless steel 1.4301 (acid-resistant, non-corrosive 18/10 chrome-nickel steel), electropolished. Also available as a complete set with wall protection plate. 

Learn more More Fewer