Search results for "sanit"

Pipe cleaner against organic waste such as hair, food scraps, soap, etc. • Can be used as a solution or prophylactically• Easy to use – does not require a professional• Acid-free• Does not attack pipes or seals• Does not develop hazardous vapors• End consumer product     areas of application   Suitable for pipes, drains, and siphons in the entire household     Application   "For improved effectiveness, pour hot water down the drain beforehand. Then slowly pour in at least 500 ml of SANIT RohrBombe® . The exposure time depends on the level of contamination, at least 30 minutes and a maximum of 8 hours. Afterwards, rinse thoroughly with plenty of water. Pour 250 ml down the drain once a month to prevent clogs."   Art. 30661000ml bottles

Learn more More Fewer

Sale only to specialist shops   • Guarantees a quick and safe removal of stubborn grease deposits, hair, cellulose compounds, and hygiene products. • Due to its special weight, deeper blockages are also reached and dissolved. • Fixes poorly functioning or clogged drains in just a few minutes • Does not attack the materials of the installed pipelines • Safe for biological sewage treatment plants     areas of application   In case of stubborn blockages in drains (kitchen, bathroom, and toilet)Cleaning of small lifting systems     Application   Remove excess water from the drain before use.Never use or mix SANIT RohrGranate® with other chemicals. Slowly pour SANIT RohrGranate® into the drain (about 500 ml) and let it act for about 5 to 10 minutes, then rinse thoroughly with cold water; if necessary, repeat the process. Ensure good ventilation during use.     Usage and Safety Instructions   For commercial use only Do not inhale emerging vapors. Caution with acrylic. Pay attention to the material compatibility of coated tubs and basins. Immediately rinse any accidentally wetted parts thoroughly with water. For safe application, we recommend a filling aid (funnel). Choose the dosage so that nothing overflows or foams over. We cannot provide information on whether our product will affect the wide variety of materials coated with color pigments or synthetic resins. This examination is your responsibility as a commercial user. As with handling all hazardous chemicals, a test should be conducted in an inconspicuous area beforehand, or ensure that these materials are not wetted (for example, by carefully and slowly pouring the product and possibly using a funnel to avoid splashes). We cannot assume any liability for damages caused by accidental wetting of sensitive materials!   Art. 30641000ml bottles  

Learn more More Fewer

Urine stone remover with excellent dissolving power   • Highest cleaning power and super fast action• Hygienically clean• Removes rust and lime   areas of application • Toilets and urinals  Application • 500 ml SANIT Urine scale remover simply pour into the toilet or urinal. • Depending on the level of soiling, the application can be repeated.• Let the SANIT urine scale remover sit for 10 minutes and then rinse with water.   In stubborn cases, assist with a standard brush. Not suitable for stainless steel sinks.Further material compatibilities of our products can be found on our homepage in our cleaning compass.     scope of delivery   1 Canister of 10 Liters     Sanit Article No. 3032, 10 L Canister

Learn more More Fewer

SANIT Shower Drain Cleaner for modern and perfect cleaning of shower drains. • Does not develop hazardous vapors• Does not attack surfaces, lines, or seals• Reliable shower drains ready for hair and soap residue• To avoid clogs, pour 0.1 l into the drain once a month.  areas of application Shower drain  Application Pour SANIT shower drain cleaner into the dirty/blocked shower drain and let it take effect, then rinse thoroughly with plenty of water after a few minutes.Place the appropriate urinal insert for the urinal to be protected on the drain, and place the basin cubes on the urinal insert at your discretion. Urinal troughs: Insert 1-2 cubes at a distance of approximately 50 cm.  scope of delivery 12 bottles of 500 ml

Learn more More Fewer

Replacement cartridge 700ml, suitable for hand sanitizer dispenser "H115".Application:"After hand cleaning for separate hand disinfection, ideal for dispenser systems and regular use in the professional field."Composition:Ethanol 75%, skin-protecting components, approved. Always read the label and product information before use.Spectrum of effects and dosage:Hygienic hand disinfection: Allow 3 ml of concentrate to take effect for at least 30 seconds. The hands/forearms must remain moist with the concentrated preparation throughout the entire application time. Suitable for disinfection in food businesses. Ready to use. Also effective against enveloped, Noro, and Rota viruses.Technical data Weight: 1kg

Learn more More Fewer

DRYFIX absorbs water up to 200 times its own volume within minutes and transforms it into a solid gel. This allows work areas to be quickly and efficiently dried out, creating a dam that keeps incoming water at bay. Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc.    Simple application The powder is sprinkled in a circle or boundary around the work area directly into the standing water. The water in the work area is completely absorbed, and a dam of gel is formed. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."    Application examples in the household "Binds spilled liquids such as knocked-over drinks, animal urine, and much more."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc.   Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).    Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

DRYFIX absorbs moisture up to 200 times its own volume within minutes and transforms it into a solid gel. This allows spilled liquids to be quickly and efficiently absorbed. The practical helper in the household for textiles, floors, and furniture. Application examples in the household"Binds spilled liquids, such as knocked-over drinks like red wine or water, but also animal urine or vomit."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc. Odors are also trapped and largely absorbed.Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).     Simple application The powder is sprinkled directly into the standing water or on the damp areas. In doing so, it absorbs moisture down to the pores and forms a compact (environmentally friendly) gel, which also encapsulates odors and small particles such as small glass shards. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."   Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc. Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: Seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

The Lübra SecoTec 1700 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1450m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. execution- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).  mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data Country of production Switzerland energy efficiency class A1 Power consumption 870 Watt supply voltage 230 V Dry performance at 15kg 2.93 kg/h consumption 0.30 kWh / kg laundry noise level (our measurement) 65 dB(A) at a distance of 2.5m 68 dB(A) at 1m distance air circulation 1450m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 44 kg Refrigerant (CFC-free) R410a guarantee 3 years  

Learn more More Fewer

The Lübra SecoTec 1410 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1350m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Modern design, including END-OFF mode. High water extraction even in the cooler season.Execution:- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data Country of production Switzerland energy efficiency class A1 Power consumption 800 Watt supply voltage 230 V Dry performance at 15kg 2.52 kg/h consumption 0.32 kWh / kg laundry noise level (our measurement) 63 dB(A) at a distance of 2.5m 66 dB(A) at 1m distance air circulation 1350m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 42 kg Refrigerant (CFC-free) R410a guarantee 3 years

Learn more More Fewer

One of the strong Krüger Secomat models. It is suitable for single-family homes with a lower drying requirement for rooms that are unheated. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device: drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating Option: This model is also available with a 1350W heater for an additional charge. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage.Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  Krüger article: 389.01 drying room: up to 25 m² Drying performance: 3.08 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secoamt 200H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification for 20kg laundry in the room) Examples of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1400 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

From the "Topten" list of the most economical room air dryers: The Dryfix "Swiss" is an excellent dryer for single-family homes with drying rooms up to 15m.² and approx. 40m of clotheslines. It is economical and quieter than room air dryers with comparable drying performance. The elegant, relatively narrow metal housing integrates optimally into the room's appearance. For installation, the support rail is fixed to the wall with two screws, and the dryer can then be easily hung. Rubber buffers prevent the transmission of (very low) vibrations to the wall. The condensate is directed via a hose either directly into a drain or into a bucket placed under the device. The air intake is on the side (right), and the coarse dust filter can be easily pulled out from the front for cleaning.  Drying programs:On the side of the housing is the control. A toggle switch is used to select whether you want the "Drying" mode or "Room Monitoring". A rotary switch can be used to easily adjust the desired residual moisture.Clothes drying: The drying program can be started at the push of a button. The dehumidifier runs until the laundry is dry and then automatically switches off. Room Monitoring: The general room monitoring serves to prevent mold and odors in the basement. The device automatically activates whenever the room humidity exceeds the value set on the dial, with an ideal value for this mode being around 55-60%. Unlike the laundry drying programs, the dryer never completely turns off in this mode, but only pauses as long as the humidity is appropriate. If the humidity rises again, the drying operation will also reactivate.  You can only get the Dryfix Swiss from us! It is exclusively manufactured for our company in a specialized factory in Switzerland.Ambient temperatureTechnically, the "Swiss" tumble dryers can be used down to 5°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  mounting on the wall  The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary installation materials such as screws / dowels are included. as well as 1m hose is included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose if possible. If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. If wall mounting is not possible, you will find suitable chassis in our range to which the dryer can be mounted.   Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.   Technical data drying room: up to 15m² Drying performance: 1.73 Kg/h Consumption per kg of laundry: 0.307 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 530W Sound pressure level (our measurement): 1.0 m distance 60 dB(A) 2.5 m distance 57 dB(A) Dehumidification capacity: 26 liters/day (30°C / 80% r.H.) air circulation volume: 600m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410A Dimensions (H/W/D): 55 x 57 x 26 cm (Depth: from wall to front) Weight: 35 Kg    Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Special features: Made in Switzerland

Learn more More Fewer

This model is suitable for single-family homes with larger amounts of laundry and in drying rooms that can become cooler in winter. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer functionAdditionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.   executionCompact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating: The Secomat150H is equipped with a 1350W heater. This automatically switches on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage. In this case, please refer to the standard version "Secomat150".Technically, the Secomat dryers can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of deliveryThe delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly"Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  drying room: up to 25 m² Drying performance: 3.17 Kg/h Consumption per kg of laundry:   0.30 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secomat 150H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification with 15kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1300 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer