The "B2-PTC" is a very effective heater for rooms, cars, and caravans.The ceramic heating element provides an incredibly good efficiency of input energy to generated heat. It is therefore ideal wherever only standard household sockets are available, but maximum heating power is required.It is also noticeable that the heating phase is much faster, as the heater reaches operating temperature within a few seconds. It heats the air by a whopping 65°C (difference between intake air temperature and exhaust air temperature), which is almost double the difference compared to conventional construction heaters. Therefore, this heater should not be placed within reach of children.The heating power can be selected in two stages: 1000W or 2000W. The target temperature is determined via a stepless thermostat controller.Normal current 230/V, min. 10 Amperes, Swiss plug with connection cable.Product advantages• Room thermostat included• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Quiet running• Motor with thermal protection• Overheating thermostat• Built-in thermostat• Automatic Reset   Technical data  Dimensions (W x H x D)  200x200x200 mm Weight 2.5 kg Housing color Metal yellow powder-coated Protection class IP21 Selectable heating power 1000 / 2000W insurance 8.7 A Motorspannung 230 V Motorstrom 0.2 A airflow 97 m³ / h temperature range 0 - 40 °C guarantee 2 years

Learn more More Fewer

TDS 10 electric heater – compact heat with 2 kW Efficient, condensation-free heat for small rooms, basements, and construction containers – compact, flexible to set up, and easy to operate. The TROTEC TDS 10 electric heater combines a space-saving design with reliable heating performance. With up to 2 kW, it is suitable for rooms up to approximately 25 m² or 60 m³ and is a practical solution for smaller basements, storage areas, garages, and construction containers. The desired temperature can be easily regulated via the continuously adjustable thermostat. The fan ensures a continuous airflow, while the heating elements switch on and off automatically as needed. In addition to two heating stages, a fan-only mode is also available. The unit generates condensation-free heat without consuming oxygen, making it also suitable for indoor spaces. Overheating protection, a thermally protected blower motor, and tip-over protection provide additional safety. Thanks to the auto-restart feature, the heater resumes operation with the previously used settings after a power interruption. For flexible placement, the TDS 10 is equipped with side mounting threads for optional wall or ceiling installation. Suitable brackets are available as accessories. Recessed controls, a robust metal housing, and the compact format make it a versatile heater for everyday use and professional applications. The intake room air is heated inside the unit and then blown out. Since a large volume of air is moved, the exiting airflow does not necessarily feel very hot. Instead, the room heats up gradually and evenly. Features: Maximum heating capacity of 2 kW Two heating stages plus fan mode Continuously adjustable thermostat Auto-restart function Overheating protection Tip-over protection Blower motor with thermal protection IP24 protection rating Condensation-free heat without oxygen consumption Prepared for wall or ceiling mounting Recessed controls Compact metal housing Precise temperature control With the integrated, continuously adjustable thermostat, the desired room temperature can be conveniently set. The heating elements switch on automatically when heat is required and switch off again once the set temperature is reached. The fan ensures a consistent flow of warm air during operation. Additionally, two heating stages of 1 kW and 2 kW, as well as a fan-only function, are available. This allows operation to be adapted to the specific heat requirement. Integrated safety functions Overheating protection and a thermally protected blower motor contribute to safe operation. Tip-over protection completes the features. The IP24 protection rating provides protection against the ingress of foreign objects and splash water according to the specified class. For setup and operation, always observe the safety instructions in the manual. Flexible setup and mounting Thanks to its compact dimensions, the TDS 10 can be placed flexibly on the floor. Side mounting threads also allow for wall or ceiling mounting with an optionally available bracket. Recessed controls complement the practical, robust design. Versatile applications The electric heater is suitable for smaller areas that require targeted heating. Typical locations include construction containers, garages, catering businesses, greenhouses, market stalls, storage and work halls, boat sheds, workshops, and shipbuilding areas. Advantages at a glance • Compact electric heater with 2 kW heating capacity• Two heating stages: 1 kW and 2 kW• Fan mode without heating function• Continuously adjustable thermostat• Automatic temperature control• Auto-restart after power interruption• Overheating protection and thermally protected blower motor• Tip-over protection• IP24 protection rating• Condensation-free heat without oxygen consumption• Wall or ceiling mounting with optional bracket• Robust metal housing with recessed controls Technical data Model TROTEC TDS 10 Item number 1410000012 Maximum heating capacity 2,000 W / 2 kW Heating stage 1 1,000 W / 1 kW Heating stage 2 2,000 W / 2 kW Fan mode Yes, without heating function Air volume 186 m³/h Recommended room size Up to 25 m² / 60 m³ Temperature range -15 °C to +25 °C ambient temperature Maximum temperature rise Up to 95 °C according to manufacturer specifications Thermostat Integrated, continuously adjustable Blower Axial fan, 1 blower stage Mains connection 230 V / 50 Hz, 1/N/PE Power consumption 2,000 W Nominal current 8.7 A Recommended mains fuse 16 A Plug type EU plug with adapter for Switzerland Protection rating IP24 Operating noise 46 dB(A) at 1 m distance Connection cable 1.35 m Housing material Metal Heating element Stainless steel heating element Functions Auto-restart, tip-over protection, thermostat, overheating protection Dimensions without packaging (L × W × H) 210 × 195 × 310 mm Dimensions with packaging (L × W × H) 240 × 260 × 360 mm Weight without packaging 3.5 kg Weight including packaging 4 kg Minimum distance to walls and objects Top, back, sides, and front at least 50 cm each Mounting Floor placement or wall/ceiling mounting with optional bracket Note: Observe the required minimum distances and follow the operating manual and all safety and warning instructions from the manufacturer.

Learn more More Fewer

Infrarot-Heizstrahler IR 1200 S – gezielte Wärme für Terrasse und Balkon Kompakter Wandheizstrahler mit 600 oder 1200 Watt, direkter Infrarotwärme und IP24-Spritzwasserschutz – ideal für überdachte Terrassen, Balkone und geschützte Aussenbereiche. Der TROTEC IR 1200 S sorgt für angenehme Wärme, wenn es auf dem Balkon, der überdachten Terrasse oder im Gastronomiebereich kühler wird. Seine Infrarotstrahlung erwärmt Personen und Gegenstände direkt, sodass keine lange Vorheizzeit erforderlich ist. Zwei Quarzheizelemente ermöglichen die Wahl zwischen 600 und 1200 Watt. Die gewünschte Heizstufe wird bequem über den integrierten Zugschalter mit Schnur eingestellt. Damit eignet sich der Heizstrahler besonders für Bereiche, in denen schnell verfügbare, gezielt ausgerichtete Wärme gefragt ist. Der Betrieb erfolgt geräuschlos und ohne Ventilator. Dadurch wird kein Staub aufgewirbelt. Die Wärmeabgabe erfolgt ohne Kondensat und störende Gerüche, was insbesondere in staubempfindlichen Umgebungen von Vorteil sein kann. Das robuste Metallgehäuse verfügt über die Schutzart IP24 und ist damit gegen Spritzwasser geschützt. Der Heizstrahler ist für überdachte und vor Witterungseinflüssen geschützte Aussenbereiche vorgesehen. Eine schwenkbare Wandhalterung ermöglicht die Neigung um bis zu 30°, damit die Wärmestrahlung gezielt auf den gewünschten Aufenthaltsbereich ausgerichtet werden kann. Die ausschliessliche Wandmontage, der unkomplizierte Zugschalter und das geringe Gewicht von 1,5 kg machen den IR 1200 S zu einer praktischen Wärmelösung für unterschiedliche geschützte Einsatzbereiche. Eigenschaften: Zwei Heizstufen: 600 und 1200 W Zwei Quarzheizelemente Sofort verfügbare Infrarotwärme Direkte Wärmeübertragung auf Personen und Gegenstände Geräuschloser Betrieb ohne Ventilator Keine Staubaufwirbelung Wärmeabgabe ohne Kondensat und störende Gerüche Spritzwasserschutz nach IP24 Schwenkbare Wandhalterung mit bis zu 30° Neigung Integrierter Zugschalter mit Schnur Kompakte Bauweise und 1,5 kg Gewicht Für überdachte, geschützte Aussenbereiche Direkte Infrarotwärme ohne Vorheizen Anders als bei einer herkömmlichen Raumheizung wird beim IR 1200 S nicht zuerst die gesamte Raumluft erwärmt. Die Infrarotstrahlung überträgt die Wärme direkt auf Personen und Gegenstände im Wirkungsbereich. Dadurch steht die Wärme unmittelbar nach dem Einschalten zur Verfügung. Mit der 600-Watt-Stufe lässt sich eine geringere Wärmeleistung wählen. Bei höherem Wärmebedarf steht die maximale Heizleistung von 1200 Watt zur Verfügung. Die tatsächliche Wirkung hängt unter anderem von der Umgebungstemperatur, der Montageposition und der Entfernung zum Heizstrahler ab. Für überdachte Terrassen und geschützte Aussenbereiche Der IR 1200 S eignet sich beispielsweise für Balkone, überdachte Terrassen, gastronomische Bereiche, Lagerräume, Baustellenräume und Container sowie für den Einsatz an Messen und Veranstaltungen. Die Schutzart IP24 bietet Schutz gegen Spritzwasser, ersetzt jedoch keine geschützte Montageposition. Das Gerät darf nicht ungeschützt direkter Witterung oder einem direkten Wasserstrahl ausgesetzt werden. Flexible Ausrichtung durch Wandmontage Die integrierte Wandhalterung ermöglicht eine feste Installation. Durch die schwenkbare Halterung lässt sich der Neigungswinkel um bis zu 30° anpassen, um die Wärme gezielt in den gewünschten Bereich zu lenken. Das erforderliche Befestigungsmaterial ist im Lieferumfang enthalten: vier Dübel und vier Befestigungsschrauben. Bei der Montage müssen folgende Mindestabstände eingehalten werden: Nach oben: mindestens 30 cm Seitlich und nach vorne: mindestens 50 cm Zum Boden: mindestens 180 cm Zu brennbaren Materialien auf der Abstrahlseite: mindestens 1 m Zu den brennbaren Materialien zählen beispielsweise Vorhänge, Textilien, Betten und Sofas. Beachten Sie zusätzlich sämtliche Montage- und Sicherheitsvorgaben der Bedienungsanleitung. Einfache Bedienung per Zugschalter Die Heizstufe wird über die integrierte Zugschnur ausgewählt. Der Betriebszustand ist wie folgt gekennzeichnet: Stufe 0: ausgeschaltet Stufe 1: 600 W Stufe 2: 1200 W Für den Betrieb wird der Heizstrahler an eine geeignete, ordnungsgemäss abgesicherte Steckdose angeschlossen. Das Anschlusskabel ist 1,2 m lang und mit einem EU-Stecker sowie einem Fixadapter für die Schweiz ausgestattet. Sicherer Betrieb und wichtige Hinweise Der IR 1200 S darf während des Betriebs nicht abgedeckt werden. Halten Sie Textilien und andere brennbare Gegenstände von der Abstrahlfläche fern und beachten Sie die vorgeschriebenen Sicherheitsabstände. Vor dem Transport oder der Reinigung muss das Gerät vollständig abkühlen. Der Heizstrahler darf weder direktem Wasserstrahl ausgesetzt noch in Wasser eingetaucht werden. Eine Deckenmontage ist nicht zulässig; das Gerät ist ausschliesslich für die Wandmontage vorgesehen. Lesen Sie vor der Installation und Inbetriebnahme unbedingt die Bedienungsanleitung. Vorteile im Überblick Sofortige Wärme durch direkte Infrarotstrahlung Zwei wählbare Heizstufen mit 600 und 1200 W Gezielte Wärme ohne lange Vorheizzeit Geräuschloser Betrieb ohne Ventilator Keine Staubaufwirbelung und keine störenden Gerüche IP24-Spritzwasserschutz für geeignete geschützte Einsatzbereiche Schwenkbare Wandhalterung mit bis zu 30° Neigung Einfache Leistungswahl über den integrierten Zugschalter Kompakt, leicht und platzsparend montierbar Inklusive Befestigungsmaterial und Bedienungsanleitung Technische Daten Modell TROTEC IR 1200 S TROTEC Artikelnummer 1410003100 Heizleistung, Stufe 1 600 W Heizleistung, Stufe 2 1200 W Nennstromaufnahme 5,2 A Netzanschluss 220–240 V / 50–60 Hz Steckerart Anschlusskabel mit EU-Stecker und Fixadapter für die Schweiz Schutzart IP24 Heizelemente 2 Quarzelemente Wirkungsfläche ca. 5–8 m², abhängig von den Umgebungsbedingungen Montage Wandmontage Neigungswinkel bis 30° Kabellänge 1,2 m Abmessungen (L × B × H) 113 × 538 × 135 mm Gewicht 1,5 kg Mindestabstand nach oben 30 cm Mindestabstand seitlich und nach vorne 50 cm Mindestabstand zum Boden 180 cm Mindestabstand zu brennbaren Materialien auf der Abstrahlseite 1 m Garantie 2 Jahre Lieferumfang 1 × Infrarot-Heizstrahler IR 1200 S 4 × Dübel für die Wandhalterung 4 × Befestigungsschrauben 1 × Bedienungsanleitung

Learn more More Fewer

Kompakter Keramik-Heizlüfter mit 2000 W Schnelle, saubere Wärme für Werkstatt, Keller, Baustelle und weitere Innenbereiche – leistungsstark, sicher und flexibel einsetzbar. Der Keramik-Heizlüfter Trotec TDS 10 P ist ein kompakter und leistungsstarker Elektroheizer für die schnelle Beheizung von Innenräumen, Werkstätten, Kellern, Lagerbereichen und Baustellen. Mit einer maximalen Heizleistung von 2000 Watt sorgt das Gerät schnell für angenehme Wärme und eignet sich mit seiner robusten Metallkonstruktion auch für anspruchsvollere Einsatzbereiche. Das langlebige keramische PTC-Heizregister erwärmt die angesaugte Raumluft besonders schnell und effizient. Im Gegensatz zu herkömmlichen Heizdrähten wird die Keramik nicht glühend heiss. Dadurch entsteht keine Staubverbrennung während des Heizvorgangs, was den TDS 10 P auch für Allergiker interessant macht. Gleichzeitig arbeitet das Gerät ohne Verbrennungsprozess, verbraucht keinen Sauerstoff und erzeugt keine Verbrennungsabgase oder Kondensate. Für eine schnelle und gleichmässige Verteilung der erwärmten Luft sorgt das leistungsstarke Radialgebläse. Mit einer Luftmenge von bis zu 227 m³/h wird die Raumluft effektiv umgewälzt. Auch ohne Heizfunktion kann der TDS 10 P als Ventilator zur Belüftung eingesetzt werden. Der Keramik-Heizlüfter wurde für einen unkomplizierten und mobilen Einsatz konzipiert. Dank seiner kompakten Abmessungen und des geringen Gewichts von nur 3 kg lässt er sich einfach transportieren und am gewünschten Einsatzort aufstellen. Die robuste Metallkonstruktion ermöglicht den Einsatz beispielsweise in Kellern, Lagern, Werkstätten, Baucontainern, Garagen, auf Innenbaustellen oder an überdachten Marktständen. Auch die Sicherheit wurde bei der Konstruktion berücksichtigt. Der integrierte Überhitzungsschutz schaltet das Gerät bei einer kritischen Temperatur automatisch ab. Zusätzlich verfügt der TDS 10 P über einen Kippschutz-Schalter, der die Heizung deaktiviert, sobald das Gerät unbeabsichtigt umkippt. Die Auto-Restart-Funktion ermöglicht nach einer Stromunterbrechung die automatische Wiederaufnahme des Betriebs. Mit einem Schalldruckpegel von 48 dB(A) bei 1 m Abstand arbeitet der Heizlüfter vergleichsweise leise. Der TDS 10 P ist für Räume bis etwa 25 m² bzw. 60 m³ ausgelegt und eignet sich damit ideal als Zusatzheizung oder zur schnellen Erwärmung kleinerer Arbeits- und Aufenthaltsbereiche. Eigenschaften: Maximale Heizleistung 2000 W Zwei Heizstufen plus Kaltluftstufe Leistungsstarkes Radialgebläse Luftmenge bis 227 m³/h Langlebiges keramisches PTC-Heizregister Stufenlose Temperaturregelung per Thermostat Integrierter Überhitzungsschutz Kippschutz-Sicherheitsabschaltung Auto-Restart-Funktion Robuste Metallkonstruktion Tragbar und einfach zu bedienen Kondensfreie Wärme ohne Sauerstoffverbrauch Langlebiges PTC-Keramik-Heizelement Das keramische PTC-Heizregister bildet das Herzstück des TDS 10 P. Im Vergleich zu herkömmlichen Heizdrähten bietet die PTC-Technologie eine längere Lebensdauer, eine unempfindlichere Technik und ein schnelles Aufheizverhalten. Ein weiterer Vorteil: Da keine glühenden Heizdrähte eingesetzt werden, kommt es während des Heizvorgangs nicht zur Verbrennung von Staub. Dadurch eignet sich der Keramik-Heizlüfter auch für Allergiker. Die Wärme entsteht ausserdem ohne Verbrennung, sodass weder Sauerstoff verbraucht noch Verbrennungsabgas erzeugt wird. Flexible Heizleistung mit drei Betriebsstufen Der TDS 10 P bietet eine reine Kaltluftstufe sowie zwei Heizstufen. In der ersten Stufe arbeitet ausschliesslich das Gebläse. Die zweite Stufe liefert 1400 Watt, während die dritte Stufe die maximale Heizleistung von 2000 Watt bereitstellt. Über das integrierte Thermostat kann die gewünschte Temperatur zusätzlich stufenlos geregelt werden. Leistungsstarkes Radialgebläse Das integrierte Radialgebläse sorgt mit einer Luftmenge von bis zu 227 m³/h für eine schnelle und gleichmässige Verteilung der erwärmten Luft. Dadurch wird die Raumluft effektiv umgewälzt und die gewünschte Temperatur schnell erreicht. In der separaten Kaltluftstufe kann das Gerät auch ohne Heizfunktion zur Belüftung eingesetzt werden. Mehr Sicherheit durch Überhitzungs- und Kippschutz Der TDS 10 P verfügt über mehrere integrierte Sicherheitsfunktionen. Der Überhitzungsschutz reagiert bei einer Temperatur von 75 °C und schützt das Gerät vor übermässiger Erwärmung. Zusätzlich schaltet der integrierte Kippschutz den Heizlüfter automatisch ab, wenn er unbeabsichtigt umkippt. Die Auto-Restart-Funktion ermöglicht nach einer Unterbrechung der Stromversorgung eine automatische Wiederaufnahme des Betriebs. Dadurch eignet sich das Gerät auch für Anwendungen, bei denen ein unbeaufsichtigter Neustart nach einer kurzzeitigen Stromunterbrechung erforderlich ist. Vielseitig einsetzbar Dank seiner robusten Metallkonstruktion und der mobilen Bauweise eignet sich der TDS 10 P für zahlreiche Einsatzbereiche. Dazu gehören beispielsweise Keller, Lager, Werkstätten, Garagen, Innenbaustellen, Baucontainer, überdachte Marktstände sowie weitere Arbeits- und Nebenräume. Mit einer empfohlenen Raumgrösse von bis zu 25 m² bzw. 60 m³ eignet sich der kompakte Heizlüfter insbesondere für kleinere Räume und als flexible Zusatzheizung. Der angegebene Arbeitsbereich reicht von -15 °C bis +25 °C.  Technische Daten Trotec Artikelnr. 1.410.000.040 Heizleistung Stufe 1 Nur Ventilation Heizleistung Stufe 2 1400 W Heizleistung Stufe 3 2000 W Maximale Heizleistung 2 kW Heizleistung 1719 kcal Luftmenge 227 m³/h Ventilator Radial Gebläsestufen 1 Arbeitsbereich -15 °C bis +25 °C Netzanschluss 220 – 240 V / 50 Hz Nennstromaufnahme 9,1 A Netzabsicherung 10 A Leistungsaufnahme 2 kW Steckerart EU-Stecker + Fixadapter für die Schweiz Kabellänge 1.3 m Thermostat Integriert Mobilität Tragbar Schallpegel bei 1 m Abstand 48 dB(A) Überhitzungsschutz Ja, 75 °C Kippschutz Ja Auto-Restart Ja Heizelement Keramisches PTC-Heizregister Gehäusematerial Metall Schutzart IP20 Abmessungen (Tiefe x Breite x Höhe) 160 x 205 x 322 mm Gewicht 3 kg Empfohlene Raumgrösse 25 m² / 60 m³ Mindestabstand alle Seiten 50 cm Garantie 2 Jahre

Learn more More Fewer

Quiet, affordable oil radiator with 3 heating levels Pleasant and uniform warmth for living rooms, bedrooms, offices, and infrequently used rooms – efficient, silent, and flexible in its use. The Trotec TRH 20 E is a compact and mobile oil radiator for pleasant warmth on cold days. With three heating levels of 800, 1,200, and 2,000 W, the heating output can be flexibly adapted to the specific heat demand. Thanks to its silent operation, the radiator is particularly suitable for living rooms and bedrooms, offices, and other areas where a quiet heat source is required. The oil radiator is ideal for the transitional period when central heating is not yet or no longer required, but additional warmth is still needed. The unit also provides cozy room warmth during frosty outside temperatures. The radiator is suitable for rooms of up to 25 m² or 60 m³. The proven 9 heating ribs increase the heating surface area and enable efficient heat dissipation. Inside, there is a liquid thermal medium that stores the generated heat. As a result, the pleasant warmth is maintained for up to about 30 minutes even after switching off. The desired room temperature can be conveniently set using the continuously adjustable rotary thermostat. Once the target temperature is reached, the unit reduces the heating output to the lowest level. If the room temperature drops again, the radiator automatically switches to a higher heating level, thereby ensuring a room temperature that is as constant as possible with reduced energy consumption. With the frost monitor function, the unit is also suitable for rooms that are not permanently heated. In unheated garages, cellars, or other rarely used areas, the radiator can be activated automatically to prevent excessive cooling and, for example, protect water pipes from frost damage. Features: 3 heating levels: 800 / 1,200 / 2,000 W Efficient 9-rib radiator Short heat-up time of approx. 8–10 minutes Heat storage with liquid thermal medium Continuously adjustable thermostat Frost monitor function Silent heating operation Overheating protection Tilt protection Auto-restart function Operating indicator light Practical cable winder Integrated casters Integrated carrying handle Long-lasting warmth thanks to heat storage A special advantage of oil radiators is the high heat storage capacity of the liquid thermal medium used. The electrical energy heats the thermal medium inside the radiator, which then releases the heat into the room air via the large heating ribs. Thanks to the 9 heating ribs, a large heating surface area is available. This enables effective heat dissipation and ensures comfortable temperatures. After switching off, the heated thermal medium continues to release heat for up to about 30 minutes. Fast warmth without a long start-up time The TRH 20 E reaches its full heating output in about 8 to 10 minutes. Pleasant warmth is noticeable after just a few minutes. With the three heating levels of 800 W, 1,200 W, and 2,000 W, the heating output can be set to match the respective room situation. The radiator operates completely silently. Since no fans are required to distribute the warm air, the unit is also suitable for bedrooms, workspaces, and other rooms where the quietest possible operation is important. Continuous thermostat control The desired temperature level is determined via the continuously adjustable rotary thermostat. As soon as the target temperature is reached, the radiator automatically switches to the lowest heating level, thereby reducing energy consumption. If the room temperature drops below the set value, the unit automatically increases the heating output again. In this way, the room temperature is kept as constant as possible, while unnecessary overheating is avoided. Frost monitor function The frost monitor function is ideal for short-term property vacancies or rooms that are not constantly used. Via the continuous thermostat control, the radiator can be set so that it is automatically activated if the room temperature drops too far. This makes the TRH 20 E suitable, for example, for unheated garages, cellars, conservatories, or other rooms not connected to central heating. Automatic activation helps to keep rooms frost-free and avoid damage from frozen water pipes or excessive cooling. Clean and silent warmth The oil radiator works without a fan and therefore does not stir up dust. At the same time, no unpleasant burning smell is produced during electrical heating operation. The warmth is therefore particularly pleasant in bedrooms as well as in households with allergy sufferers or sensitive individuals. Heat is emitted silently and without odors. This makes the radiator also suitable for rooms where a quiet and as clean as possible heat source is desired. Advantages at a glance • 2,000 W output for fast and cozy warmth• 3 power levels (800 W / 1,200 W / 2,000 W)• Effective 9-rib radiator• Short heat-up time: full heat output in approx. 8–10 minutes• Heat storage with liquid thermal medium for long-lasting warmth after switching off• Continuously adjustable thermostat• Frost monitor function• Silent heating• Maximum safety thanks to overheating and tilt protection• Operating indicator light• Practical cable winder for quick organization• Integrated casters and carrying handle for safe transport, even when hot Areas of application The mobile oil radiator is suitable for numerous areas of application. It is particularly practical wherever rooms are only temporarily heated or an additional heat source is needed. Typical areas of application include: • Living rooms• Bedrooms• Offices and workspaces• Conservatories• Guest rooms• Garden sheds• Workshops• Garages• Cellars Safe and flexible in use The TRH 20 E is designed for safe mobile operation. The integrated casters allow for easy transport from room to room. The carrying handle also makes it easier to move the unit, even when it is still warm. An integrated tilt switch automatically turns off the unit if the radiator is accidentally knocked over. Additionally, a safety thermostat protects against excessively high operating temperatures. The practical cable winder prevents the 1.4 m long power cord from unwinding unintentionally during transport or storage. Please note • The ERP table for this heater can be found in the download area.• The unit is only suitable for use in well-insulated rooms or for occasional use. Technical data Heating output level 1 800 W Heating output level 2 1,200 W Heating output level 3 2,000 W Maximum heating output 2,000 W Maximum room size 25 m² (60 m³) Temperature range 10 – 35 °C Number of heating ribs 9 Mains connection 220 – 240 V / 50 – 60 Hz Nominal current consumption 8.7 A Mains fuse 16 A Plug type EU plug + fixed adapter for Switzerland Cable length 1.4 m Degree of protection IPX0 Dimensions (D x W x H) 120 x 400 x 500 mm Minimum distance above 100 cm Minimum distance behind 100 cm Minimum distance to the side 100 cm Minimum distance in front 100 cm Weight 7 kg Operating noise silent Thermostat continuously adjustable Frost monitor function yes Auto-restart function yes Operating indicator light yes Overheating protection yes Tilt protection yes Heat storage Liquid thermal medium

Learn more More Fewer

Small convection heater with fan This mobile flat radiator brings energy-efficient heat and contemporary design to rooms and workspaces that are rarely used or not connected to the central heating system. The visually appealing convector impresses with a modern product design, clear shapes, and easy operation. Turn it on, set the temperature, and immediately enjoy pleasant convection heat. An intelligent heat automation system automatically regulates the room temperature and optimally reduces electricity consumption.  Intelligent Thermostat Control A two-stage heating element with selectable heating power of 1000 or 2000W enables the rapid heating of rooms up to a size of 24 m² or 60 m³ – for example, as an additional heater in living or bedrooms, or as a quick heater for warming hobby rooms and basements, or even as an emergency heater in case a central heating system should fail. As practical as it is energy-saving, the integrated thermostat control automatically regulates the indoor temperature to the desired target value. The desired temperature level is conveniently and continuously set via a side-mounted rotary thermostat. Intelligent temperature sensors continuously monitor the room temperature and adjust the heating output according to the desired temperature. Once the target temperature is reached, the electric heating element switches off until additional heating of the room is required. This saves electricity costs and makes the use of the heating device more economical.  Quickly to pleasant comfort temperatures On cold days, you want to get warm as quickly as possible. Therefore, the convector is equipped with a switchable turbo fan in both heating levels for accelerated air circulation and warm air distribution.  Cozy warm room temperatures thanks to convection This device operates with the effect of uniform convection heat. The room air is heated by electrically heated wires and consequently rises as warm air. This creates a natural draft that draws cold room air into the device. In this way, a constant circulation of warm air is generated throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus optimally preventing overheating or underheating of individual areas. Once the preset temperature is reached, the device switches off and only turns back on when additional heating of the room is necessary to reach the target value again. The result is a room-filling comfortable warmth – which is 100% clean, condensation-free, and odorless due to the electric heating element.  Clean comfortable warmth for • Living spaces• Bedroom• Home office study• Winter gardens• Hobby rooms• Holiday homes• Workshops• Garages• Basement rooms There are good reasons for and against the use of a convector with a turbo fan. If a room needs to be heated in the shortest time possible, the high fan setting is recommended so that the heat spreads throughout the room as quickly as possible. Operation without the ventilation switched on is silent, while with the ventilation switched on, the noise of the fan is perceptible depending on the setting, either quietly or somewhat louder. In quiet bedrooms, the pure convection heat without the ventilation switched on is more pleasant.  Advantages for Practice • Up to 2000 W heating power for clean, condensation-free, and odorless warmth• 2 heating levels (1000 W / 2000 W)• Turbo blower for faster air circulation• Stepless temperature control• Thermostat-controlled automatic operation• Frost Guardian Function• Energy-efficient operation thanks to automatic shutdown upon reaching target values• Maximum safety thanks to overheating and tilt protection• Silent heating (when the fan is not in operation)• Stable stand due to large feet• Integrated grip recess for easy transport  Frost Guardian Function  Ideal for short-term property vacancies or spaces that are not constantly used. With the stepless thermostat control of our mobile TCH convectors, you can also use the devices in frost protection mode. The heating device is then automatically activated via the thermostat to keep the rooms frost-free or to prevent excessive cooling. As frost protection devices, the TCH convectors are not only ideally suited for landlords or real estate companies – they also provide a practical function for private individuals or businesses to keep vacant spaces or garages frost-free. In particular, rooms, conservatories, or basements that are not connected to central heating can be reliably kept warm in this way.  Please note • The ERP table for this heating device can be found in the "Documents" section.• The device is only suitable for use in well-insulated rooms or for occasional use.   Technical data  heating capacity 1000 / 2000W Heizart Convention and Fan Maximum room size 24 m² (60 m³) temperature range 0 - 40 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 8 A Power consumption max. 2000W Recommended Coverage 10 A Cable length approx. 1.7 m Plug EU plug with Swiss adapter Dimensions W x H x D 530 x 378 x 172 mm (including stand feet) Weight 3 kg Protection class IPX0 on/off switch yes, step switch OFF - 1000W - 2000W thermostat control and LC-Display no Frost Watch Function and Automatic shutdown at target value and parental controls no Timer no, operation on timer possible anti-tip device and Operating noise without fan Operating noise with fan noiselessly max. 50 dB(A) at 1m distance, 47 dB(A) at 2.5m distance guarantee 2 years  

Learn more More Fewer

Trotec TDS 20 C – Leistungsstarker Keramik-Heizlüfter für schnelle Wärme Kompakter 3-kW-Keramik-Heizlüfter mit moderner PTC-Technologie, 2 Heizstufen und zusätzlicher Kaltluftfunktion. Der Trotec TDS 20 C sorgt schnell und zuverlässig für angenehme Wärme in Innenräumen. Dank seines leistungsstarken keramischen PTC-Heizregisters erwärmt der kompakte Elektro-Heizlüfter die Raumluft effizient und gleichmässig. Mit einer maximalen Heizleistung von 3000 Watt eignet sich das Gerät für Räume bis etwa 30 m² bzw. 75 m³. Zwei Heizstufen ermöglichen eine bedarfsgerechte Wärmeregulierung. Zusätzlich steht eine Kaltluftstufe zur Verfügung, sodass sich der TDS 20 C auch zur Belüftung einsetzen lässt. Die keramische PTC-Technologie bietet dabei einen wichtigen Vorteil: Das Heizelement passt seine Heizleistung temperaturabhängig an und sorgt dadurch für einen effizienten und sicheren Heizbetrieb. Eigenschaften: 3000 W maximale Heizleistung Keramisches PTC-Heizregister 2 Heizstufen Zusätzliche Kaltluftstufe Für Räume bis ca. 30 m² / 75 m³ 3-stufiger Ventilator Überhitzungsschutz Kompakte Bauweise Tragegriff für einfachen Transport Effiziente Wärme dank keramischer PTC-Technologie Das keramische PTC-Heizelement des TDS 20 C ermöglicht eine schnelle und zuverlässige Erwärmung der Raumluft. Im Gegensatz zu herkömmlichen Heizdrähten passt sich die Leistungsaufnahme eines PTC-Heizelements an die Temperaturentwicklung an. Dadurch wird eine effiziente und kontrollierte Wärmeabgabe unterstützt. Die Keramik-Technologie macht den Heizlüfter besonders für den Einsatz in Wohn-, Hobby- und Arbeitsbereichen interessant, wenn kurzfristig zusätzliche Wärme benötigt wird. Individuell regulierbare Heizleistung Mit seinen zwei Heizstufen lässt sich die Wärmeleistung des TDS 20 C flexibel an den jeweiligen Bedarf anpassen. Für die schnelle Erwärmung steht die maximale Leistung von bis zu 3000 Watt zur Verfügung. Zusätzlich verfügt das Gerät über eine Kaltluftstufe. Damit kann der Ventilator auch ohne Heizfunktion betrieben werden und unterstützt die Luftzirkulation im Raum. Vielseitig einsetzbar Der TDS 20 C eignet sich zur schnellen Zusatzbeheizung von Innenräumen mit einer Grösse von bis zu etwa 30 m² bzw. 75 m³. Durch seine kompakte Bauweise und den integrierten Tragegriff lässt sich der Heizlüfter unkompliziert an unterschiedlichen Einsatzorten verwenden. Ob Werkstatt, Hobbyraum, Büro, Keller, Garage oder andere Innenbereiche – der TDS 20 C liefert bei Bedarf schnell zusätzliche Wärme. Sicherer Heizbetrieb Für einen sicheren Betrieb ist der TDS 20 C mit einem Überhitzungsschutz ausgestattet. Das Gerät wurde für einen zuverlässigen und kontrollierten Heizbetrieb konzipiert und verbindet leistungsstarke Wärme mit einer kompakten, robusten Bauweise. Hinweis zum Schweizer Fixadapter Der TDS 20 C wird mit einem ca. 1,6 m langen Anschlusskabel mit EU-Stecker und Fixadapter Typ 23 für die Schweiz geliefert. Bitte beachten: Der mitgelieferte Fixadapter Typ 23 passt nur auf entsprechende Typ-23-Steckdosen. Diese erkennen Sie an den viereckigen Kontaktöffnungen statt der runden Öffnungen. Bitte prüfen Sie vor der Inbetriebnahme, ob an Ihrem Einsatzort eine passende Typ-23-Steckdose vorhanden ist. Vorteile im Überblick • Bis zu 3000 W Heizleistung für schnelle Wärme • Keramisches PTC-Heizregister für effiziente Wärmeabgabe • 2 Heizstufen für bedarfsgerechte Temperaturregelung • Zusätzliche Kaltluftstufe zur Luftzirkulation • 3-stufiger Ventilator • Geeignet für Räume bis ca. 30 m² bzw. 75 m³ • Kompakte und robuste Bauweise • Einfacher Transport dank integriertem Tragegriff • Überhitzungsschutz für einen sicheren Betrieb • Anschlusskabel mit EU-Stecker und Fixadapter Typ 23 für die Schweiz Technische Daten Heizleistung 3000 W Heizstufen 2 Kaltluftstufe Ja Geeignete Raumgrösse Ca. 30 m² Geeignetes Raumvolumen Ca. 75 m³ Heizelement Keramisches PTC-Heizregister Ventilator 3-stufig Betriebsgeräusch Ca. 55 dB(A) Leistungsaufnahme Max. 3.000 W Überhitzungsschutz Ja Anschlusskabel Ca. 1,6 m mit EU-Stecker und Fixadapter Typ 23 für die Schweiz Fixadapter Typ 23 – nur für entsprechende Typ-23-Steckdosen mit viereckigen Kontaktöffnungen geeignet Garantie 2 Jahre

Learn more More Fewer

TDS 30 R – Electric heater 5 kW Professional electric fan heater for construction sites, workshops and indoor areas Professional electric heater with 5 kW heating capacity The TDS 30 R is a robust and powerful electric fan heater with up to 5 kW heating capacity for professional use. Thanks to the electric heating principle, the unit operates without consuming oxygen, without combustion exhaust gases and without condensation. The compact 400 V electric heater is particularly suitable for unheated indoor areas, workshops, garages, construction sites, assembly areas, warehouses and industrial halls as well as other commercial applications. Electric fan heater for demanding applications The TDS 30 R was developed for reliable use in demanding environments. As an electric construction heater, it produces clean and condensation-free heat without consuming oxygen from the room air. This makes the fan heater particularly suitable for heating enclosed or poorly ventilated indoor areas. As no combustion exhaust gases are generated, no exhaust air ducting is required. Typical areas of application include construction sites, workshops, garages, automotive repair shops, warehouses, industrial halls, shipbuilding areas, agriculture and commercial interior spaces. Flexible heating capacity and integrated thermostat The desired warm air temperature can be set via the integrated, infinitely variable thermostat. The heating capacity can be adjusted to the respective heat requirement via two heating stages. Additionally, the TDS 30 R features a separate fan stage without heating function. This allows the unit to be used for pure air circulation as well. Ventilation only with 0.05 kW Heating operation with 2.5 kW Maximum heating capacity 5 kW Infinitely adjustable thermostat Robust metal housing and high mobility The housing of the electric heater is made of fully galvanized and painted sheet steel. This makes the TDS 30 R designed for use in demanding environments. The ergonomic carrying and transport handle allows for easy relocation. Weighing only 5 kg, the compact fan heater is particularly easy to transport and use flexibly. Safety and reliable operation The TDS 30 R features several integrated safety functions. These include overheating protection, tilt protection, thermal protection for the blower motor as well as a fan run-on function. After switching off, the fan can continue to run to dissipate residual heat remaining in the unit in a controlled manner. This reliably cools down the components. Safety benefit: Electric heating produces no combustion exhaust gases and no condensing moisture. This makes the TDS 30 R particularly suitable for heating indoor spaces. Your benefits at a glance Maximum heating capacity of 5 kW 400 V connection with CEE 16 A Robust metal housing Compact design and low weight Integrated, infinitely variable thermostat Condensation-free heat without oxygen consumption Overheating protection Tilt protection Blower motor with thermal protection Fan run-on function Pure fan operation possible Ergonomic carrying and transport handle Possible areas of application Car and automotive workshops Construction sites and assembly operations Warehouses and industrial halls Garages and workshops Shipbuilding and industrial applications Agricultural sectors Catering/hospitality Greenhouses Technical data Trotec item no. 1410000003 Heating element Stainless steel heating coil Operating principle Electric Housing design Metal Fan type Axial Dimensions and weight Length without packaging 275 mm Width without packaging 220 mm Height without packaging 330 mm Weight without packaging 5 kg Weight including packaging 5.5 kg Performance and power supply Mains connection and frequency 400 V / 50 Hz Connection plug CEE 16 A, 5-pin Nominal current consumption 7.22 A Maximum heating capacity 5 kW (4,300 kcal/h) Recommended fuse 16 A Cable length 1.2 m Heating capacity and air volume Heating stages 1: Ventilation only (0.05 kW) 2: Ventilation + heating (2.5 kW) 3: Ventilation + heating (5 kW) Max. air volume 580 m³/h Fan stages 1 Max. temperature increase at 1 m 85 °C Operating conditions and safety Temperature range -15 °C to 25 °C Sound level at 1 m distance 56 dB(A) IP rating IP20 Safety functions Auto-restart function, fan run-on function, tilt protection Mobility Carrying/transport handle(s) Warranty 2 years

Learn more More Fewer

High-performance IR 2050 wall-mounted infrared heater Rapid, targeted infrared heat with 2000 W, 3 heat settings and IP65 weatherproof protection – ideal for patios, balconies, workshops, and catering establishments. The Trotec IR 2050 infrared heater provides pleasant warmth wherever quick and targeted heating is required. Whether in uncovered outdoor areas, on patios and balconies, in the catering industry, workshops, or at trade fairs and events – the device generates uniform and targeted heat immediately after switching on, with no need for preheating. Short-wave infrared radiation acts directly on people and objects hit by the radiation. These surfaces store the absorbed heat and then release it as secondary radiation. This creates quickly noticeable warmth exactly where it is needed. With a maximum heat output of 2000 watts and three heat settings, the heating power can be flexibly adapted to individual needs. The high-quality Low Glare short-wave infrared tube combines intensive heat with significantly reduced light emission. With protection class IP65, the device is protected against water jets as well as the ingress of dust. Features: 3 heat settings: 750 / 1500 / 2000 W Infrared heat without preheating Even and targeted heat distribution High-quality Low Glare short-wave infrared tube Up to 6000 hours of illumination Up to 80% reduced light emission IP65 protection class Dust and rainproof from all directions Weather-resistant aluminum housing Infrared remote control Suitable for wall mounting Adjustable tilt angle No dust circulation Silent operation without a fan Instant and targeted infrared heat The IR 2050 uses the natural principle of infrared radiation. Instead of heating the air in the room, the radiation directly warms people and objects. The surfaces hit absorb the thermal energy, store it, and emit it back as secondary radiation. As a result, heat is available immediately after switching on. Preheating is not required. The radiant heat can be aimed specifically at the desired area, making it particularly suitable for spot heating at workbenches, seating areas, guest tables, or other work and leisure spaces. Flexible heat output with 3 heat settings With three heat settings, the heating output can be flexibly adapted to individual requirements. You can choose between 750 watts, 1500 watts, and 2000 watts. The desired heat setting can be conveniently selected via the included infrared remote control. Additionally, the heater can be operated directly on the device. Low Glare – comfortable warmth with reduced red light The high-quality Low Glare short-wave infrared tube provides intensive heat with significantly reduced light emission. The bright red light, which has previously been perceived as annoying, is reduced by up to 80% while the heat intensity remains fully preserved. The infrared tube reaches an average service life of up to 6000 hours and is thus designed for long-term use over several heating seasons. Weatherproof and suitable for outdoor use The robust aluminum housing and the IP65 protection class make the IR 2050 a resilient heater for outdoor use. The device is protected against water jets and is dust and rainproof from all directions. This makes it suitable for uncovered balconies and terraces as well as for professional applications in the catering industry, workshops, at trade fairs, and events. Silent and without dust circulation Since the IR 2050 operates without a fan, it generates heat completely silently. At the same time, the room air is not moved by a fan, meaning no dust is swirled around. This makes the heater suitable for allergy sufferers and areas where especially quiet operation is desired. Flexible alignment and simple operation The heater features a wall bracket with an adjustable tilt angle. The device can be angled up to 90° upwards and downwards, allowing the heat radiation to be directed exactly to the desired area. It is operated conveniently via the infrared remote control; alternatively, the IR 2050 can be operated directly on the device. The heater is intended exclusively for wall mounting and must be installed horizontally. For safe mounting, a minimum distance of 180 cm from the floor and at least 50 cm from adjacent walls and objects must be maintained. The heater must not be mounted on the ceiling. Efficient heat for spot applications The IR 2050 converts a large proportion of the electrical energy used directly into radiant heat. This makes it particularly suitable as an energy-efficient standby heating solution for areas where it is not necessary to heat the entire room air. The heat can be provided specifically where it is needed. Scope of delivery 1 x Heater1 x Remote control (without battery)1 x Operating manualMounting material: 1 x Mounting bracket, 2 x wing nut, 3 x screws, 2 x fastening screw, 3 x wall plugs, 1 x Allen key SW 5 Technical data Heating capacity 750 / 1500 / 2000 W Effective range ideal 8-10 m², max. 14 m² Mains connection 220 – 240 V ~ 50/60 Hz Nominal current consumption 8.7 A Power input 2 kW Plug type EU plug + fixed adapter for Switzerland Cable length 1.7 m Housing design Aluminum Protection class IP65 Dimensions (depth x width x height) 165 x 630 x 105 mm Minimum distance to walls and objectsside / top 50 cm Minimum distance to walls and objects in radiation direction 180 cm Remote control battery 1 x type CR 2025 / 3 V Weight 2 kg Trotec item no. 1410003211 Warranty 2 years

Learn more More Fewer

TDS 30 M – Electric Heater 5 kW with PTC Ceramic Professional fan heater with PTC technology for construction sites, workshops, and commercial use Powerful 5 kW fan heater with PTC technology The TDS 30 M is a professional electric heater with 5 kW heating capacity and a long-lasting PTC ceramic heating element. Thanks to its high airflow rate, this compact fan heater is ideal for rapidly heating large and cold rooms. The device operates on 380–400 V high-voltage current and offers two heating levels as well as a separate cold-air mode. The robust construction and stable feet make the TDS 30 M a reliable solution for construction sites, workshops, warehouses, production halls, and commercial spaces. PTC ceramic technology for uniform warmth The long-lasting PTC ceramic heating element offers numerous advantages over conventional heating coils. The flow of warm air is generated more evenly and without drafts, and noise levels remain comparatively low. A special benefit of PTC technology is the self-regulating power consumption. The PTC heating element adjusts its output depending on the ambient temperature. This allows for more uniform heat distribution and reduces the risk of overheating. Since the PTC heater works without classic glowing heating coils, there is no burning of dust on hot heating wires. As a result, the indoor air is not additionally burdened by burnt dust. Advantages of the PTC heater Self-regulating PTC ceramic technology More uniform room temperature and lower temperature fluctuations Consistent and draft-free warm airflow No dust burning on classic heating coils Integrated overheating protection Thermal protection and fan run-on function Infinitely adjustable thermostat Condensation-free heat without oxygen consumption Heat-insulated carrying handle Robust metal housing Safe and reliable operation The TDS 30 M features several integrated protective functions for reliable operation. These include overheating protection, thermal protection, and an auto-restart function. Positioning the controls below the heating area protects the electronics from rising residual heat, thus contributing to the high reliability of the device. The fan motor is also equipped with thermal protection. The fan run-on function further supports the controlled cooling of the components after the heating operation. PTC advantage: The ceramic heating element independently adjusts its power consumption to the ambient temperature, thereby contributing to safe and uniform heating operation. Heating capacity and operating modes The maximum heating capacity is 5 kW. Two heating levels are available via the function switch. In addition, the TDS 30 M can be used solely as a fan without the heating function. Ventilation only – 0.05 kW Ventilation + Heating – 3.3 kW Ventilation + Heating – 5 kW Max. airflow 575 m³/h Robust construction and easy mobility The robust metal housing is designed for use in demanding environments. The feet ensure a stable position during operation. Thanks to the integrated heat-insulated carrying and transport handle, the electric heater, weighing only 4 kg, can be easily transported to the desired location. Furthermore, the unit is stackable, making it particularly practical for storage and transport. Potential applications The TDS 30 M is suitable as an electric construction heater, workshop heater, and fan heater for numerous commercial and professional applications. Auto and car workshops Construction sites and assembly operations Warehouses and production halls Workshops and commercial premises Catering/Hospitality Greenhouses Your benefits at a glance 5 kW maximum heating capacity PTC ceramic heating element 380–400 V high-voltage power connection CEE 16 A, 5-pin connection plug 575 m³/h maximum airflow Infinitely adjustable thermostat Fan-only operation possible Condensation-free heat without oxygen consumption Overheating protection Auto-restart function Fan motor with thermal protection Fan run-on function Stable feet Stackable for space-saving storage Technical data Trotec item no. 1410000054 Heating element PTC ceramic heating element Operating principle Electric Housing design Metal Fan type Axial Storage capacity Stackable Dimensions and weight Length excluding packaging 250 mm Width excluding packaging 205 mm Height excluding packaging 360 mm Weight excluding packaging 4 kg Weight including packaging 5 kg Performance and power supply Mains connection and frequency 380–400 V / 50 Hz Connection plug CEE 16 A, 5-pin Nominal current consumption 7.6 A Power consumption 5 kW Recommended fuse protection 10 A Cable length 1.15 m Heating capacity and airflow Levels 1: Ventilation only (0.05 kW) 2: Ventilation + Heating (3.3 kW) 3: Ventilation + Heating (5 kW) Max. heating capacity 5 kW (4,300 kcal/h) Max. airflow 575 m³/h Fan stages 1 Max. temperature increase at 1 m distance 90 °C Operating conditions and safety Temperature range -15 °C to 25 °C Sound level at 1 m distance 53 dB(A) IP rating IP20 Overheating protection 98 °C Safety functions Overheating protection, auto-restart function Mobility Carrying/transport handle(s), feet Warranty 2 years

Learn more More Fewer

Cozy feel-good warmth   "As the days in the transition period to autumn/winter become colder, but the stationary heating system is still turned off for cost reasons, the ultra-flat design convector TCH 1510 E provides pleasant, odorless, and noiseless warmth for comfortably tempered rooms with its continuously adjustable heating power of 1500 watts via thermostat – whether you use it as a wall or standing device."     Stylishly shaped   A large-area and highly efficient aluminum heating element of approximately 55 cm in length, along with aerodynamically shaped air outlets on the top of the device, ensures rapid heat distribution in rooms up to 20 m² or 50 m³. Whether in a modern living environment, in office settings, in the bathroom, or even in unheated conservatories, garages, or holiday homes: wherever quick and/or additional heat is required, the design convector demonstrates its performance. It belongs to protection class IP24 (splash-proof) and is therefore also approved for damp rooms. However, please ensure that sufficient distance from water is maintained when installing in bathrooms.     Uniform convection heat   In the TCH series convectors, the air in the device is heated by electrically heated wires and consequently rises as warm air, creating a natural draft that draws in cold room air into the device. This creates a continuous circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus preventing overheating or underheating of individual areas. Once the preset temperature is reached, the device reduces its output and maintains the desired temperature.     Innovative window-open detection prevents energy waste   Regular ventilation is essential for a good and healthy indoor climate. To avoid unnecessary energy waste during ventilation, the device features an energy-saving window-open detection. When the window is opened, the convector reduces its heating output in thermostat-controlled automatic mode until the window is closed again. An automatic temperature control of the room temperature and an intelligent heat automation further reduce the already economical energy consumption. When the preset desired temperature (in the range of 0 to 50 °C) is reached, the heating element automatically switches off and only turns back on when additional heating is required. This keeps the energy consumption of the convector pleasantly low, and no expensive energy costs are thrown out the window.     Smart equipment for warm feel-good times   The comfort features of the design convector are rounded off by a room temperature and clock display, two operating modes (automatic and weekly mode), stable stand feet for flexible use in different locations, a wall mount, an operating hours display, and an extra-long power cable for maximum freedom of movement.     Cozy warm interiors with comfort   This heater operates with the effect of uniform convection heat and, like this, it can be used almost everywhere in private living environments or in offices: for example, as an emergency heater when the main heating fails, as a reliable transitional heater before the heating period begins, or for heating areas such as conservatories, garages, hobby rooms, or basement areas that are not connected to a central heating system.     Operating hours display – keeps consumption in view   "Whether as a tenant or landlord – it can occasionally be helpful to know how much heating costs have been incurred over a specific period. With the practical operating hours display, you can monitor and record consumption down to the hour."     Weekly mode – individual heating times and temperatures every day   Every day is different. On weekends, we usually spend more time at home, and accordingly, the heating demand is greater. A programmable weekly timer allows you to program individual heating times and room temperatures for each day of the week.   "More warmth on the weekend and less warmth during the week when you leave the house in the morning: In week mode, individual room temperatures and heating times can be assigned to each day of the week. Quite practical."     Child safety lock – for safe operation in the children's room   The child lock protects the device settings of the convector from curious children's hands. Once activated, the device settings can no longer be changed via the control panel.     Frost Guardian Function   Ideal for short-term property vacancies or spaces that are not constantly used. With the stepless thermostat control, you can also use the devices in frost protection mode. The heating device is then automatically activated via the thermostat to keep the rooms frost-free or to prevent excessive cooling. The TCH convectors are not only ideally suited for landlords or real estate companies as frost protection devices – they also provide a practical function for private individuals or businesses to keep vacant rooms or garages frost-free. In particular, rooms, conservatories, or basements that are not connected to central heating can be reliably kept warm in this way.     Advantages at a Glance   • Up to 1500 W heating power for clean, condensation-free, and odorless warmth• Large heating element of approximately 55 cm in length• Temperature range adjustable between 0-50 C°• Stepless temperature control• Innovative Window Open Detection• Automatic temperature control / Intelligent heat automation• Frost Guardian Function• Energy-efficient operation thanks to automatic shutdown upon reaching target values• Current room temperature display• Timer Function• Weekly timer• Operating hours display• LCD-Display• Parental controls• Overheat protection• Can be used as a wall or stand device• Frost Guardian Function   Please note • You can find the ErP table for this heating device in the "Documents" section. • The device is only suitable for use in well-insulated rooms or for occasional use. • The selectable temperature does not always correspond to what can be technically achieved. The larger the room and the lower the base temperature in the room, the fewer high temperature targets can be reached. For example, in a well-insulated room of 15 - 20 m², temperature targets of a comfortable 20 - 25°C should be easily achievable, whereas the maximum adjustable target of 50°C is not realistic with 1500 watts of power.    Technical data  heating capacity 1500W Heizart Convention Maximum room size 20 m² (50 m³) temperature range 0 - 50 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 6.5 A Power consumption max. 1500W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter Dimensions W x H x D 690 x 480 x 260 mm (including stand feet) Weight 6kg Protection class IP24 on/off switch and thermostat control and LC-Display and Frost Watch Function and Automatic shutdown at target value and parental controls and Timer yes (one-time, weekly timer, weekday timer) anti-tip device and Open-Window-Detection and guarantee 2 years

Learn more More Fewer

These robust, industrial fan heaters are equipped with a durable metal housing and are designed for floor-standing use. Thanks to the practical carrying handle and the sturdy rack, they can be easily transported and used flexibly. The operation of the device is incredibly simple: The function switch allows the heating power to be set to either half or full power, and an exclusive fan operation is also possible. An integrated room thermostat ensures a constant temperature by automatically turning off the heating when the set value is reached and keeping the fan running for continuous air circulation. These space heaters are extremely versatile and are ideal for a wide range of applications, including construction heating, garages, workshops, storage rooms, retail spaces, greenhouses, sports and factory halls, as well as many other areas of use.Characteristics• Heating power adjustable up to 9000 watts• Thermostat for regulating and setting the desired temperature• Two heating levels selectable (1 = 4500 watts / 2 = 9000 watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection• Stepless temperature control (5 ~ 35° C)• Integrated protection mechanism against overheating• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• Quiet operation• No oxygen consumption• CE Conformity, 2006/95/EC, 2004/108/EC, EN 60335-1, EN 60335-2-30• Made in ItalyMiscellaneous• A five-pole 16 A high-voltage connection 380V/415V (50/60Hz) with CEE16A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.• No power cable included, the plug is directly on the device. You can find suitable power cables in various lengths and designs with us. Examples of useTemperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden houses, laundry rooms, and for use in professional and hobby activities, etc.Drying: Ideal for faster drying of plaster, screed, etc. (work can be continued or applied very quickly)Damp Rooms: Ideal for damp basements, old walls, and drying all damp objects.Damage Removal: After flooding, after damage from extinguishing water, or in case of decay, these devices are ideally suited to support the drying process.How much heat do I need?Our free heat demand calculator helps you determine the required heating power for your rooms.'Here you can access the online calculator: Calculate heat demand' Technical data Tension 380V - 415V / 50Hz Power consumption 2 stages 4.5 kW / 9 kW Protection max. 16 A Room thermostat 5 - 35°C Air volume flow 800 m³/h Protection class IPX4 Dimensions (H x W x D)   41 x 42 x 32 cm Weight: 9 Kg Operational cessation Drehrad Area of application up to max. 90m² Plug CEE 16 A Guarantee 2 years

Learn more More Fewer

High-performance infrared patio heater with 3 heat settings Instant, pleasant warmth for patios and balconies – quiet, targeted, low-glare, and conveniently controllable. The Trotec IRS 2000 E provides pleasant warmth on patios and balconies, extending the use of outdoor areas even on cooler days. The infrared heat is transmitted directly to people and objects, making it immediately noticeable – with no long warm-up phase. With its three heat settings of 650 W, 1350 W, and 2000 W, the heat output can be flexibly adjusted to the situation at hand. The high-quality low-glare carbon infrared tube combines pleasant warmth with exceptionally low light emission. The IRS 2000 E is suitable for an effective area of up to max. 15 m² (ideal: 8–10 m²). The infrared heat is clean, condensation-free, and odorless. Since no air is moved by the device, there is neither drafts nor dust swirling. This makes the IRS 2000 E an attractive option for allergy and asthma sufferers as well. For safe operation, the device features an integrated tilt protection. With an IP34 protection rating, the IRS 2000 E is protected against splashing water and is suitable for use in sheltered outdoor areas. Features: 3 heat settings: 650 W / 1350 W / 2000 W Effective area up to max. 15 m² (ideal: 8–10 m²) Low-glare carbon infrared tube Up to 80% less light emission Approx. 5,500 lighting hours Wide heat distribution via reflector mirror 24-hour timer Infrared remote control LED display and operating indicator light IP34 protection rating Integrated tilt protection with warning tone Robust aluminum housing Silent operation without a fan Direct heat without preheating Infrared radiation does not heat the ambient air first, but rather the people and objects it shines on. As a result, the heat is perceived immediately. This makes the IRS 2000 E particularly suitable for targeted use on patios and balconies when quick, pleasant warmth is needed. Low-glare thanks to Low-Glare technology The carbon infrared tube was specifically developed for reduced light output. It generates pleasant warmth while simultaneously producing up to 80% less light emission compared to conventional heating tubes. This ensures that ambient lighting outdoors remains largely undisturbed. With a service life of up to 5,500 lighting hours, the heating tube is also durable and low-maintenance. Convenient operation The desired heat output can be adjusted across three levels. For added convenience, the IRS 2000 E can be controlled via an infrared remote control. The integrated 24-hour timer enables automatic shutdown after the desired operating duration. For patios and balconies The compact pillar design with a round base allows for flexible and space-saving placement. The specially shaped reflector mirror distributes heat over a large area. With an IP34 protection rating, the device is protected against splashing water and is designed for use in sheltered outdoor areas. Safety functions The integrated tilt protection automatically switches off the device in the event of unintentional tipping and also emits a warning tone. The protective grille reduces the risk of direct contact with the heating tube. Technical data Model IRS 2000 E Trotec item no. 1410003920 Heat output 650 / 1350 / 2000 W Maximum heat output 2000 W Effective area 8–10 m² (max. 15 m²) Nominal current consumption 8.6 A Mains connection 220–240 V / 50–60 Hz Connection plug EU plug + fixed adapter for Switzerland Protection rating IP34 Cable length 1.80 m Dimensions (length × width × height) 300 × 300 × 1,000 mm Minimum distance above 100 cm Minimum distance around the unit 100 cm Weight 5 kg Remote control battery CR 2025 / 3 V Warranty 2 years

Learn more More Fewer

A handy electric heater with very good heat efficiency thanks to the ceramic heating element. This allows the heater to reach the desired heating output with a short warm-up time. At the high heating level of 2000 W, the blown air is heated to more than 60 °C above room temperature. The temperature controller has a wide range starting from 0 °C. The BGP can thus also be used as a frost guard when the room temperature needs to be kept just above freezing.The ventilation is rather mild at about 120 m³/h compared to other electric heaters in this category; however, the BGP is hardly audible in terms of operating noise thanks to the quiet radial fan. This model is therefore suitable not only for use in construction and industry but also for heating quiet areas such as waiting rooms, living rooms, or simply for keeping your feet warm under the office desk. The housing is made of a black, fireproof plastic and a metal rack with a practical carrying handle. The fan head can be rotated vertically in a large radius up to 90°, allowing the warm air to be directed precisely to the desired location. With the help of two standard hooks, the device can even be hung on a wall (hooks not included in the delivery).The heater has two rotary controls at the top of the housing:• left step controller: only ventilation / 1200 W / 2000 W• right: stepless thermostat for regulating the desired temperatureAdditionally, there is an operating light located between the two controls that indicates when the heating operation is running."If the temperature is correct, the heating pauses (the ventilation also stops). If the temperature falls below the set value, the operation starts automatically."The adjustable range of the temperature controller is from 0° to 85°C, with an overheating protection that interrupts the heating operation at a room temperature of just over 40°C.Due to the high exhaust temperature, the device should not be placed within reach of children or pets, although the solid front grill of this model poses significantly less risk of burns than similar fan heaters, which only have a metal grid for air exhaust. How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 220V-240V / 50HzHeating levels: 2 levels 1200 W / 2000 W + pure fan level: 25 WMinimum protection: 9.1 ARoom thermostat: continuously adjustable 0 - 85 °CAir volume flow: only one fan stage  our measurement: 120 m³/h(Manufacturer's specification: 170 m³/h)Protection class: IP20operating noise(our measurement): 1 m distance: 39 dB(A)2.5m distance : 36 dB(A)Dimensions: Height with handle: 32 cmWidth: 30 cmDepth: 25 cmWeight: 3.1 KgOperating mode: rotary knobApplication area: up to max. 25 m²Swiss plug: Yes + 1.30 m connection cableWarranty: 2 years   

Learn more More Fewer

15 kW Elektro-Heizlüfter FEH für Baustelle und Industrie Leistungsstarke Wärme für Baustellen, Industriehallen und grosse Räume. Robust konstruiert, flexibel einstellbar und für den anspruchsvollen gewerblichen Einsatz ausgelegt. Der Elektro-Heizlüfter FEH bietet eine Heizleistung von bis zu 15 kW und eignet sich für die Beheizung von Baustellen, Werkstätten, Industriehallen und grosszügigen Räumlichkeiten. Seine robuste Konstruktion und die unkomplizierte Bedienung machen ihn zu einer praktischen Lösung für den professionellen Einsatz. Das widerstandsfähige Metallgehäuse in Königsblau ist stapelbar und verfügt über ein integriertes Rack, das die Lagerung und den Transport erleichtert. Stabile Tragegriffe unterstützen das Handling im Arbeitsalltag. Über drei Heizstufen lässt sich die Leistung passend zum Wärmebedarf auf 5, 10 oder 15 kW einstellen. Alternativ steht eine reine Ventilatorstufe zur Verfügung, mit der die Luft auch ohne Heizbetrieb umgewälzt werden kann. Das integrierte Raumthermostat regelt die Temperatur im Bereich von 4 bis 40 °C. Sobald die eingestellte Zieltemperatur erreicht ist, wird die Heizung abgeschaltet, während der Ventilator für eine kontinuierliche Luftumwälzung weiterläuft. Ein zusätzliches Sicherheitsthermostat schützt vor Überhitzung. Der Anschluss erfolgt über das fest angeschlossene, rund 1,20 m lange Kabel mit fünfpoligem CEE-32-A-Stecker nach Schweizer Norm. Dank Schutzart IPX4 ist das Gerät gegen Spritzwasser geschützt. Damit eignet es sich für vielfältige Einsatzbereiche in Gewerbe und Industrie, sofern die jeweiligen Betriebs- und Sicherheitsbedingungen eingehalten werden. Hinweis: Dieses Modell wird angeboten, solange Vorrat vorhanden ist. Eigenschaften: Heizleistung bis 15 kW Drei Heizstufen: 5 / 10 / 15 kW Separate Ventilatorstufe ohne Heizung Integriertes Raumthermostat Temperaturregelung von 4 bis 40 °C Ventilatorbetrieb zur kontinuierlichen Luftumwälzung bei erreichter Solltemperatur Sicherheitsthermostat als Überhitzungsschutz Robustes, stapelbares Metallgehäuse in Königsblau Integriertes Rack und stabile Tragegriffe Spritzwasserschutz nach IPX4 Fest angeschlossenes Kabel mit CEE-32-A-Stecker Für Baustellen, Werkstätten und Industrie geeignet Flexible Heizleistung und Temperaturregelung Mit den drei wählbaren Heizstufen lässt sich die Wärmeabgabe an den jeweiligen Bedarf anpassen. Die Leistungsstufen von 5, 10 und 15 kW ermöglichen einen flexiblen Betrieb in unterschiedlichen Arbeitssituationen. Für die Luftumwälzung ohne zusätzliche Wärmezufuhr kann der reine Ventilatorbetrieb genutzt werden. Das Raumthermostat regelt die Temperatur automatisch innerhalb seines Einstellbereichs von 4 bis 40 °C. Nach Erreichen der gewünschten Temperatur schaltet die Heizung ab; der Ventilator läuft weiter und unterstützt die gleichmässige Verteilung der Raumluft. Robuste Konstruktion und Sicherheit Das strapazierfähige, königsblaue Metallgehäuse ist auf den Einsatz in anspruchsvollen Arbeitsumgebungen ausgelegt. Durch die stapelbare Bauweise und das integrierte Rack lässt sich der Heizlüfter platzsparend lagern. Die stabilen Tragegriffe erleichtern den Transport und die Positionierung am Einsatzort. Ein Sicherheitsthermostat schützt das Gerät vor Überhitzung. Die Schutzart IPX4 bietet Schutz gegen Spritzwasser. Die Eignung für einen konkreten Einsatzort hängt zusätzlich von den örtlichen Bedingungen, den elektrischen Anschlussvorschriften und den erforderlichen Sicherheitsmassnahmen ab. Elektrischer Anschluss Der FEH wird mit einem fest angeschlossenen Kabel von ca. 1,20 m Länge und einem fünfpoligen CEE-32-A-Stecker nach Schweizer Norm geliefert. Für den Betrieb ist ein geeigneter 400-V-Netzanschluss erforderlich. Die maximale Stromaufnahme beträgt 25 A. Technische Daten Heizleistung 15 kW Leistungsstufen 5 kW / 10 kW / 15 kW Luftvolumenstrom 1550 m³/h Raumthermostat-Bereich 4–40 °C Schalldruckpegel 52 dB(A) Netzanschluss 400 V / 50 Hz Anschlusskabel ca. 1.20 m mit CEE 32 A Stecker (5-polig, Schweizer Norm) Stromaufnahme max. 25 A Schutzart IPX4 (spritzwassergeschützt) Abmessungen (H × B × T) 550 × 410 × 360 mm Gewicht 14.5 kg Garantie 2 Jahre

Learn more More Fewer

Elektroheizer Trotec TDS 50 – 9 kW Heizleistung Leistungsstarke Elektroheizung für Werkstätten, Lagerhallen und Baustellen – mit Thermostatsteuerung, zwei Heizstufen und integrierten Sicherheitsfunktionen. Der Elektroheizer Trotec TDS 50 sorgt mit einer maximalen Heizleistung von 9 kW und einem Luftdurchsatz von bis zu 708 m³/h für eine bedarfsgerechte Beheizung geschlossener Räume. Er eignet sich für Werkstätten, Baucontainer, Garagen, Lager- und Arbeitshallen sowie für weitere gewerbliche Innenbereiche. Über den Wahlschalter stehen zwei Heizstufen mit 4,5 kW und 9 kW sowie ein separater Ventilatorbetrieb ohne Heizfunktion zur Verfügung. Das stufenlos einstellbare Raumthermostat ermöglicht eine Anpassung der Temperatur an den jeweiligen Bedarf. Die elektrische Wärmeerzeugung erfolgt kondensfrei, ohne Sauerstoffverbrauch und ohne Verbrennungsabgase. Ein integriertes Luftleitblech unterstützt die gezielte Warmluftverteilung. Die trapezförmig angeordneten Tragebügel erleichtern das standsichere Stapeln mehrerer Geräte; seitliche Befestigungsgewinde ermöglichen mit optionalen Halterungen auch eine Wand- oder Deckenmontage. Für den sicheren Betrieb verfügt das Gerät über einen Überhitzungsschutz, einen thermisch geschützten Gebläsemotor und eine Ventilator-Nachlauffunktion. Nach dem Heizbetrieb kann der Ventilator die internen Komponenten etwa drei Minuten lang abkühlen. Eine Auto-Restart-Funktion unterstützt die Wiederaufnahme des Betriebs nach einer Stromunterbrechung. Nach einer Überhitzungsabschaltung oder einem Stromausfall kann ein manueller Reset gemäss Bedienungsanleitung erforderlich sein. Eigenschaften auf einen Blick 9 kW maximale Heizleistung Zwei Heizstufen: 4,5 kW und 9 kW Ventilatorbetrieb ohne Heizung Stufenlos einstellbares Raumthermostat Luftdurchsatz bis 708 m³/h Überhitzungsschutz und Motorschutz Ventilator-Nachlauf zur Abkühlung Auto-Restart-Funktion Integriertes Luftleitblech Optionale Wand- und Deckenmontage Stapelbare Konstruktion Kondensfreie Wärme ohne Sauerstoffverbrauch Flexible Heizleistung und Temperaturregelung Mit den Heizstufen von 4,5 kW und 9 kW lässt sich die Wärmeabgabe an den jeweiligen Heizbedarf anpassen. Das integrierte Raumthermostat regelt die gewünschte Temperatur stufenlos. Sobald die eingestellte Temperatur erreicht ist, schaltet sich die Heizung ab, während der Ventilator weiterläuft. Für die reine Luftumwälzung steht zusätzlich ein Ventilatorbetrieb ohne Heizleistung zur Verfügung. Sicherheit und kontrollierte Abkühlung Der Überhitzungsschutz und der thermisch geschützte Gebläsemotor unterstützen einen sicheren Betrieb. Nach dem Heizen sollte der Ventilator gemäss Bedienungsanleitung etwa drei Minuten in der Kaltluftstufe weiterlaufen, damit die internen Komponenten abkühlen können. Nach einer Überhitzungsabschaltung oder einem Stromausfall ist gegebenenfalls ein manueller Reset erforderlich. Das Gerät darf nicht über eine Zeitschaltuhr oder eine andere automatische Einschaltvorrichtung betrieben werden. Flexible Aufstellung und Montage Der TDS 50 kann auf einer stabilen, waagerechten Fläche aufgestellt oder mithilfe einer optional erhältlichen Halterung an Wand oder Decke montiert werden. Die Tragebügel ermöglichen zudem das standsichere Stapeln mehrerer Geräte. Bei der Aufstellung sind die vorgeschriebenen Sicherheitsabstände einzuhalten: mindestens 50 cm zu Wänden und Gegenständen auf allen Seiten sowie mindestens 1 m Abstand zu brennbaren Materialien vor dem Luftauslass. Lufteinlass und Luftauslass müssen stets frei bleiben. Vielseitig einsetzbar in geschlossenen Räumen Der Elektroheizer eignet sich unter anderem für Baucontainer, Garagen, Werkstätten, Gewächshäuser, Marktstände, Gastronomiebetriebe, Lager- und Arbeitshallen, Bootsschuppen und Werften. Der Betrieb in Nassräumen ist nur unter Einhaltung der geltenden lokalen und nationalen Vorschriften für elektrische Geräte zulässig. Eine Verwendung im Freien oder in explosionsgefährdeten Bereichen ist nicht vorgesehen. Technische Daten Modell Trotec TDS 50 Trotec Artikelnr. 1410000020 Heizleistung, Stufe 1 4500 W (4,5 kW) Heizleistung, Stufe 2 9000 W (9 kW) Ventilatorbetrieb Ja, ohne Heizfunktion Maximale Luftmenge 708 m³/h Netzanschluss 3/PE, 400 V, 50 Hz Nennstromaufnahme 13 A Netzabsicherung 16 A Steckerart CEE, 16 A, 5-polig Schutzart IP24 Kabellänge Kein Kabel im Lieferumfang enthalten Schalldruckpegel in 1 m Abstand 52 dB(A) Gewicht 9,5 kg Abmessungen (L × B × H) 283 × 355 × 515 mm Arbeitsbereich −15 °C bis +25 °C Mindestabstand zu Wänden und Gegenständen 50 cm oben, hinten, seitlich und vorne Sicherheitsabstand zu brennbaren Materialien Mindestens 1 m vor Lufteinlass und Luftauslass Temperaturregelung Integriertes, stufenlos einstellbares Raumthermostat Sicherheitsausstattung Überhitzungsschutz, thermischer Motorschutz und Ventilator-Nachlauf Weitere Ausstattung Auto-Restart-Funktion, Luftleitblech, Befestigungsgewinde für optionale Wand- und Deckenhalterungen Garantie 2 Jahre Wichtige Hinweise zum Betrieb Das Gerät darf während des Betriebs nicht abgedeckt werden. Lufteinlass und Luftauslass müssen frei bleiben. Verwenden Sie den Elektroheizer weder im Freien noch in explosionsgefährdeten Bereichen oder in der Nähe leicht entflammbarer Dämpfe. Schliessen Sie das Gerät an eine ordnungsgemäss abgesicherte Stromversorgung an und beachten Sie die Bedienungsanleitung sowie alle vorgeschriebenen Sicherheitsabstände. Nach einer Überhitzungsabschaltung oder einem Stromausfall ist gegebenenfalls ein manueller Reset erforderlich. Betreiben Sie das Gerät nicht über eine Zeitschaltuhr oder eine andere automatische Einschaltvorrichtung.

Learn more More Fewer

Profi-Elektroheizgebläse TDS 50 E mit 9 kW Heizleistung Kraftvolle, kondensfreie Wärme für Werkstätten, Baustellen und Gewerberäume – mit integriertem Thermostat, zwei Heizstufen und zuverlässigem Überhitzungsschutz. Das Elektroheizgebläse Trotec TDS 50 E ist eine leistungsstarke Lösung für die schnelle Beheizung geschlossener Arbeits- und Nutzräume. Mit bis zu 9 kW Heizleistung und einer Luftmenge von 845 m³/h verteilt das Gerät die erzeugte Wärme effizient und unterstützt ein angenehmes Arbeitsklima auch in kühlen Räumen. Das integrierte Thermostat ermöglicht eine bedarfsgerechte Temperaturregelung. Neben dem reinen Ventilatorbetrieb ohne Heizfunktion stehen zwei Heizstufen mit 4,5 kW und 9 kW zur Verfügung. So lässt sich die Wärmeabgabe an die jeweiligen Anforderungen anpassen. Ein wesentlicher Vorteil ist die kondensfreie Wärme ohne Sauerstoffverbrauch. Im Gegensatz zu direkt befeuerten Gas- oder Ölheizgeräten entstehen bei der elektrischen Wärmeerzeugung keine Verbrennungsabgase. Dadurch eignet sich das Heizgebläse besonders für geeignete Innenräume wie Werkstätten, Baucontainer, Lager- und Arbeitshallen. Auch für den professionellen Einsatz ist das Gerät ausgelegt: Der Gebläsemotor verfügt über einen eigenen Thermoschutz, während ein zusätzlicher Überhitzungsschutz die Betriebssicherheit erhöht. Das kompakte, tragbare Gehäuse erleichtert den Transport zwischen verschiedenen Einsatzorten. Mit seinem kraftvollen Warmluftstrom, der unkomplizierten Bedienung und den abgestuften Heizleistungen ist der TDS 50 E eine praktische Unterstützung überall dort, wo schnell verfügbare elektrische Wärme benötigt wird. Eigenschaften: Maximale Heizleistung von 9 kW Luftmenge bis zu 845 m³/h Integriertes Thermostat Zwei Heizstufen mit 4,5 und 9 kW Separater Ventilatorbetrieb ohne Heizung Kondensfreie Wärme ohne Sauerstoffverbrauch Gebläsemotor mit Thermoschutz Integrierter Überhitzungsschutz 400-V-Drehstromanschluss CEE-Stecker, 5-polig, 16 A Tragbare Bauweise Für geeignete geschlossene Arbeitsräume Flexible Heizleistung und Thermostatregelung Das integrierte Thermostat unterstützt eine bedarfsgerechte Temperaturregelung und sorgt für einen gleichmässigen Warmluftstrom. Je nach Wärmebedarf kann zwischen 4,5 kW und 9 kW gewählt werden. Für die reine Luftumwälzung lässt sich das Gerät ohne zugeschaltete Heizleistung betreiben. Diese Betriebsart eignet sich, wenn Luft bewegt werden soll, ohne zusätzliche Wärme zu erzeugen. Kondensfreie Wärme ohne Sauerstoffverbrauch Da das TDS 50 E elektrisch heizt, entstehen bei der Wärmeerzeugung keine Verbrennungsabgase und es wird kein Sauerstoff verbraucht. Das macht das Gerät zu einer geeigneten Lösung für die Beheizung geschlossener Räume wie Baucontainer, Garagen, Werkstätten, Marktstände, Gastronomiebereiche, Lager- und Arbeitshallen, Werften, Gewächshäuser und Bootsschuppen. In Nassräumen sind die jeweils geltenden Vorschriften für elektrische Geräte einzuhalten. Integrierte Schutzfunktionen Der Gebläsemotor ist mit einem Thermoschutz ausgestattet. Zusätzlich schützt ein Sicherheitsthermostat vor Überhitzung: Bei Überschreiten der zulässigen Betriebstemperatur werden die Heizspiralen abgeschaltet, während der Ventilator weiterläuft. Beim TDS 50 E ist der Überhitzungsschutz auf 55 °C ausgelegt. Für einen sicheren Betrieb müssen Lufteinlass und Luftauslass stets frei bleiben. Das Heizgerät darf nicht abgedeckt werden und muss mit den vorgeschriebenen Abständen zu Wänden, Gegenständen und brennbaren Materialien aufgestellt werden. Aufstellung und Einsatz Das tragbare Elektroheizgebläse ist für die Beheizung geschlossener Räume vorgesehen und muss aufrecht sowie standsicher auf einer waagerechten, stabilen Fläche stehen. Es darf nicht im Freien, in explosionsgefährdeten Bereichen oder in der Nähe leicht entflammbarer Dämpfe verwendet werden. Der elektrische Anschluss erfolgt über ein 400-V-Netz und einen fünfpoligen CEE-Stecker mit 16 A. Die Stromversorgung muss fachgerecht abgesichert sein. Das Gerät darf nicht über eine Zeitschaltuhr oder eine automatische Einschaltvorrichtung betrieben werden, da bei ungünstiger Aufstellung oder Abdeckung Brandgefahr besteht. Technische Daten Modell Trotec TDS 50 E Artikelnummer 1410000087 Maximale Heizleistung 9 kW Heizleistung Stufe 1 Nur Ventilation, ohne Heizung Heizleistung Stufe 2 4,5 kW Heizleistung Stufe 3 9 kW Maximale Luftmenge 845 m³/h Arbeitsbereich −15 °C bis +25 °C Netzanschluss 400 V / 50 Hz (Drehstrom) Maximale Leistungsaufnahme 9000 W Nennstromaufnahme 13 A Netzabsicherung 16 A Steckerart CEE-Stecker, 5-polig, 16 A Kabellänge 1,1 m Schalldruckpegel bei 1 m Abstand 55 dB(A) Schutzart IP24 Überhitzungsschutz Sicherheitsthermostat, 55 °C Gebläsemotor mit Thermoschutz Ja Temperaturregelung Integriertes Thermostat, zwei Heizstufen Abmessungen (L × B × H) 390 × 300 × 430 mm Gewicht 10 kg Mindestabstand seitlich und nach oben 50 cm Mindestabstand Ansaugseite 50 cm Mindestabstand Ausblasseite 100 cm Mindestabstand zu brennbaren Gegenständen vorne 100 cm Garantie 2 Jahre

Learn more More Fewer

The Heater 200LS is an affordable yet high-quality infrared-based heating solution. It can be mounted on the ceiling using the included chain, similar to a lampshade, and thus provides warmth from above. It is ideal for creating a cozy table setting on the balcony, as well as for providing targeted heating in workplaces such as basements, workshops, or production halls.The 200LS has a protection class of IP24. This means that it is protected against splashing water and is therefore suitable for both indoor and protected outdoor areas. The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, which means at a normal room height of about 2.5m, it covers a radius of about 2-3 meters.Heater:The heater has 2 heating tubes of 1000W each, which can be switched on individually or together. The heating power can thus be adjusted at the device itself with the push of a button, but also via the included remote control to either 1000W or 2000W. The heating tubes emit not only heat during operation but also a bright light, which sufficiently illuminates the warmed area.LED light:Additionally, the 200LS is equipped with an LED lamp that can be turned on independently of the heating operation. It emits a subtle white light downwards. The brightness of the heating tubes is stronger than that of the LED light, so the lamp is particularly useful when heating is not in operation.The device is almost entirely made of metal and impresses with its very robust workmanship.Properties & Advantages over other heaters:• Equipped with two individual heating tubes• IP24 - suitable for indoor and outdoor use• Heating power selectable 1000 watts or 2000 watts• Integrated, separately switchable LED lamp as a light source even without heating operation• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning the LED light on/off.• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataVoltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2000 WHeating levels: 2 (1000 W / 2000 W)Dimensions (H/W/D): 265 x 430 x 430 mmProtection class: IP24 (protected against foreign bodies >12.5 mm and against splashing water)Weight: 3.5 kg

Learn more More Fewer

Powerful 15kW heater for heating larger rooms. Solid metal housing with rack, easy to transport. The blower has a high air circulation volume, which distributes the heat more widely in the room. The device is also suitable for continuous operation on construction sites and for heating large rooms, halls, and tents.  execution• Robust metal housing black• Safety-insulated carrying handles• Room thermostat• Safety thermostat, protects against overheating Miscellaneous• A five-pole 32 A high-voltage connection 380V/415V (50/60Hz) with CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating. Technische data Tension: 400V / 50 Hz Power consumption: 4 levelsOnly Ventilation / 5 kW / 10 kW / max. 15 kW Protection max.: 20.7 A Room thermostat: 4 - 40 °C air volume flow: 1350 m³/h Protection class: IP44 Operating noise: 1 m distance 54 dB(A) (our measurement) Dimensions housing (H/W/D) 44 x 36 x 33 cm Dimensions with rack (H/W/D): 51 x 41 x 33 cm Weight: 18 Kg Business closure: rotary wheel Application area: up to max. 150 m² Plug: CEE 32 A Guarantee: 2 years     How much heating power do I need? As a rough rule of thumb, for closed rooms with normal ceiling height (2.5 m), approximately 1 kW of heating power is required per 10 m². This value depends on insulation and cold load in the room.

Learn more More Fewer

  The air heater BLP 33 M (33kW) and the more powerful version BLP 53 M (53kW) are a simple solution for quickly heating ventilated zones and rooms using gas. The heating power is strong and adjustable via a rotary switch.In addition to a commercially available gas bottle (available, for example, at gas station shops), a 230V socket is required for the operation of the control system and the fan. The delivery includes the ready-to-plug device, including a connection hose with a non-return valve for connecting to the gas bottle.ImportantThe combustion of gas consumes oxygen. Therefore, this heater must not be used in closed, poorly ventilated rooms, especially not in small rooms. Furthermore, a safety distance from flammable materials must be observed. The heater must also not be operated in rooms where the air contains explosive gases.Product features• Manual ignition• Regulator includes a safety valve that stops the gas flow in the event of cracks in the gas line.• Pressure reducer and gas line included in the set• Motor with thermal protection• Overheating thermostat• Adjustable Heat• Robust and durable construction• Easy maintenance• Safety gas valve with thermoelement• Solenoid valve Technical data    33M 53M  Dimensions ( L x W x H)  552 x 220 x 342 etc   605 x 276 x 444 etc  Weight 9 kg 15 kg  Housing color Metal yellow powder-coated  air flow  1000 m3/h   1450 m3/h  Adjustable heating power  18-33 kW   36-53 kW  insurance 0.26 TO   0.48 TO  Motorspannung 220-240V / 50Hz  Pressure 0.75 - 1.5 bar Gas Propane/Butan guarantee 2 years  

Learn more More Fewer

High-quality heater fan with 5kW heating power. Made in Italy - no Chinese products. Robust metal housing with rack and side carrying handles for good stability and easy transport.With the function switch, the device can be set to 1/2 or 1/1 heating power or used only as a fan. A room thermostat maintains the temperature at the set value. When the desired temperature is reached, the heating turns off while the fan continues to run for a constant circulation of room air.These heaters are excellent for heating construction sites, garages, workshops, storage rooms, retail spaces, or even for private hobby rooms and many other applications.  What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.  Execution of this heating blower • Robust metal housing, yellow powder-coated• continuously variable room thermostat• 2-stage adjustable heating power 2.5 kW / 5 kW• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Pure recirculation operation without heating possible• Comparatively quiet operating noise• Heating elements made of stainless steel• Overheating thermostat• Automatic reset in case of overheating of the control• Motor with thermal protection• CEE plug 5-pole 16 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand     Technical data Heating power: 5 kWStages: only recirculation / 2.5 kW / 5 kWAir volume: 510 m³ / hRoom thermostat: continuously adjustable 5-35 °CSound level: 49 dB(A) at a distance of 2.5 mDimensions (H x W x D): 380 x 330 x 440 mmWeight: 6.4 kgMaximum input: 7.2 AConnection: 400V / 50HzCable / Plug: CEE16A, no cableTest certificates: CEProtection class: IP24Warranty: 3 years

Learn more More Fewer

The heater 210S is a powerful infrared heater in a stylish industrial look. It can be attached to the ceiling using the included chain, similar to a lampshade, and thus warms from above. It is ideal for creating a cozy table setting on the balcony, but also for providing targeted heating in workplaces such as basements, workshops, or production halls.The heater has protection class IP54 - which means protection against splashing water - and is therefore also suitable for outdoor use.The infrared heat is generated very quickly and is transmitted through heat waves, which keep people and objects warm. The heat is also immediately noticeable in wind and drafts and spreads at an angle of 150° downwards, meaning at a normal room height of about 2.5m, it covers a radius of approximately 2-3 meters. Heater:The 210S is equipped with two powerful carbon heating tubes, which have a significantly lower glare effect than conventional heating tubes. The heating power can be selected in three levels: 900W / 1200W / 2100W. The heating strength can be adjusted by pressing a button on the device itself, as well as via the included remote control.The device is almost entirely made of metal and impresses with its very robust workmanship.Features & Advantages over Other Heaters:• Equipped with two individual heating tubes• IP54 - suitable for indoor and outdoor use• Three heating levels 900 / 1200 / 2100 W (fits standard household socket)• High-quality processing, predominantly made of metal• Including remote control for selecting the heating level and for turning on/off• Heat transfer without a fan using infrared technology, warms even in drafts.• Silent operation• Fulfillment of WEEE standards• "GS" tested and of course with CE and EMC conformityExamples of use:For keeping warm workplaces, terraces, balconies, winter gardens, restaurants, tents, pavilions, workshops, agriculture, garages, storage, cellars, sheds, gardens, and for use in professional and hobby activities, etc.2 year guarantee Technical data Voltage: 220V-240V / 50Hz (normal household socket) Max. consumption: 2100 WHeating levels: 3 (900 W / 1200 W / 2000 W)Heating tubes: 2 carbon heating tubesHousing: Metal, light gray paintedDimensions (H/W/D): 310 x 475 x 475 mmProtection class: IP54 (protected against dust in harmful amounts and against splashing water)Weight: 3.5 kg

Learn more More Fewer

"This heater is suitable for quickly warming seating areas on terraces, in lounges, sports halls, or conservatories, so that the cozy gathering does not come to an abrupt end due to the cold. Thanks to its slim, attractive design, this heater is not only a source of warmth but also integrates decoratively into the room design."     Usable as wall and ceiling heating radiators   A supplied bracket allows for horizontal or vertical mounting of the heater on the wall or ceiling. The 45° swivel joint enables precise alignment of the heat rays to seating or table areas. Additionally, an easy-to-install cable system with quick screw connection is included in the delivery. This allows the heater to be hung lower from the ceiling. The installation itself can be done easily with minimal DIY skills.     Feel-good atmosphere at the push of a button   The pleasant infrared heat is immediately noticeable on the skin after switching on. To adjust the heat intensity, the heater has two heating levels of 1100 watts or 2200 watts, which can be set directly on the device or via the included remote control. When mounted on the ceiling, the height is also crucial for how much the space below is heated and how wide the heat rays spread. The lower the height, the warmer and smaller the illuminated area becomes. In lounges, a height of about 2.30 - 2.50m is considered comfortable.     Infrared heat: As pleasant and natural as the sun   Infrared heats the immediate environment according to the natural principle of the sun. Unlike devices with heating wires, infrared rays do not warm the surrounding air, but exclusively the surfaces and people they encounter. The irradiated objects (such as furniture, walls, and ceilings) absorb the heat and store it, gradually releasing it back. The objects thus serve as an additional energy and heat storage – even when the device is turned off, which further increases efficiency. The heat radiation creates a pleasant feeling of warm sunlight on the skin in summer.   The high heating level (2200 watts) covers an area of approximately 9 m² in outdoor areas (in cool surroundings) or a maximum of 15 m² in slightly tempered, wind-protected environments.    "In particular, allergy sufferers and people with sensitive airways will find the benefits of infrared heaters to be soothing. The clean and condensation-free instant heat is generated, unlike electric heaters, without dust swirling, disturbing noises, and unpleasant odors."     Low Glare: 100% heat, 80% less light   Conventional infrared heaters often emit an intense orange-red light, which many people perceive as warm and cozy, but sometimes also as glaring. To prevent the surroundings from being too brightly lit, this heater is equipped with two shortwave infrared tubes featuring light-reducing Low Glare technology. Advantages of Low Glare technology:   Romantic candlelight atmosphere: Low glare shortwave heaters produce a larger proportion of infrared light from the invisible light spectrum. The infrared radiation is bundled through an innovative coating process of the tubes, which reduces scattering losses. Overall, low glare heating tubes achieve a light reduction of up to 80% compared to conventional technology, with a lifespan of approximately 6000 hours.   Full heat output at lower brightness: "As the perceivable light is significantly reduced, the immediate surroundings of the heater create the impression of a cozy candlelight atmosphere, and the ambiance is noticeably more pleasant. An already existing lighting concept on the terrace or in the gastronomy is overall less affected."     Advantages at a Glance   • Instant heat without preheating• Uniform and targeted heat distribution• Clean, condensate-free, odorless and noiseless• No dust swirling, therefore suitable for allergy sufferers• 2 heating levels 1100W / 2200 Watts• Remote control• Elegant Design• Weather-resistant aluminum-plastic housing• High-quality low glare shortwave infrared tubes – approx. 6000 hours of light with 80% less light• Adjustable 45° tilt angle – with a large effective area• Usable in the covered outdoor area• LED display• Operating control light• Suitable for wall and ceiling mounting• Energy efficient     Information video on infrared heaters   Technical data  heating capacity max. 2200W on/off switch yes, step switch OFF - 1000W - 2000W Heizart Shortwave infrared heat waves, low glare tubes effective area 9 - 15 m² Voltage 220 - 240 V/50 Hz rated current consumption max. 9.5 A Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss fixed adapter Dimensions W x H x D 1039 x 78 x 78 mm Weight 2.5 kg Protection class IP66 (dust-tight and protected against powerful water jets) Min. distance to flammable materials side/top 50cm, bottom 180cm) remote control yes (2 x AAA batteries 1.5V) LED-Display and parental controls no Timer no Trotec article number: 1.410.003.215 guarantee 2 years

Learn more More Fewer

Electric heater TDS 75 – powerful heat up to 15 kW Professional electric heater with three heating stages, high air output and sophisticated safety features – ideal for construction sites, workshops and large rooms. The TROTEC TDS 75 electric heater is a robust fan heater for demanding heating tasks in trade, industry and construction. With a maximum heating capacity of 15 kW and an air flow rate of 1,293 m³/h, the device is suitable for larger rooms, warehouses, workshops and construction site areas. The integrated thermostat control allows for infinitely variable adjustment of the desired temperature. The three operating levels allow you to select either pure fan operation or heating outputs of 5, 10 and 15 kW. This allows the heat output to be flexibly adjusted to the respective requirements. A standard-integrated air baffle supports the targeted emission of warm air and improves its distribution in the room. The fan motor with thermal protection, the overheating protection and the tilt protection complete the features. After the heating is switched off, the fan continues to run to cool down the device components. The auto-restart function allows operation to resume with the previously used settings after a power failure. The recessed controls are designed for practical use and reduce the risk of accidental adjustments. The fan heater produces condensate-free heat without combustion and does not consume oxygen during heat generation. This makes it suitable for heating suitable interior spaces. Actual suitability depends on the operating conditions, room size and electrical installation. The TDS 75 also offers practical advantages when it comes to transport and installation. The trapezoidally mounted carrying handles allow several devices to be stacked stably. Lateral mounting threads also allow installation on walls or ceilings using an optionally available bracket. This allows the fan heater to be used flexibly in various working environments. Features: Maximum heating capacity of 15 kW Three operating levels: ventilation, 5 kW, 10 kW and 15 kW Integrated thermostat control Infinitely variable temperature setting Air baffle for targeted heat emission Overheating protection Fan motor with thermal protection Tilt protection Fan run-on function Auto-restart function Protection class IP24 Stackable carrying handles Wall and ceiling mounting possible Condensate-free heat without oxygen consumption Flexible heat output for different requirements The three heating levels allow the heat output to be adjusted to meet demand. In addition to pure fan operation, heating outputs of 5, 10 and 15 kW are available. The integrated thermostat regulates the desired temperature and supports a constant flow of warm air. With an air flow rate of 1,293 m³/h, the fan heater distributes the generated heat in the room. The integrated air baffle directs the warm air stream precisely outwards and supports efficient heat output. Sophisticated safety functions The integrated overheating protection and the thermally protected fan motor help to protect the device against excessive heat development. Additional tilt protection rounds off the safety equipment. The IP24 protection class offers protection against solid foreign objects 12.5 mm in diameter and larger, as well as against splash water from all directions. After the heating function is switched off, the fan continues to run to cool down the internal components. This ensures residual heat is dissipated. The prescribed safety distances and the instructions in the operating manual must be observed during every use. Auto-restart for comfortable operation After an interruption of the power supply, the electric heater can continue working with the previous settings thanks to the auto-restart function. This is particularly practical in working environments where the most uninterrupted heating operation possible is required. The resumption of operation does not replace the need to check the device after a malfunction. Before using it again, possible causes for an interruption should be checked. Space-saving installation and flexible mounting The trapezoidally arranged carrying handles allow several fan heaters to be stacked stably and facilitate space-saving storage. The recessed operating elements are designed for practical use in everyday work. Using the lateral mounting threads, the device can be mounted on a wall or ceiling using a separately available bracket. Alternatively, flexible floor installation is possible. Versatile areas of application The TDS 75 is suitable for site huts, garages, catering areas, greenhouses, market stalls, storage and work halls, boat sheds, workshops and shipbuilding. The required heating capacity depends on the room size, insulation, desired temperature and environmental conditions. Advantages at a glance • Three operating levels for flexible heat output • Maximum heating capacity of 15 kW • Thermostat control for the desired room temperature • Air baffle for targeted distribution of warm air • Overheating protection and thermally protected fan motor • Tilt protection for additional safety • Fan run-on for cooling down the components • Auto-restart after power interruptions • Protection class IP24 • Condensate-free heat without oxygen consumption • Space-saving stackable and easy to transport • Optional wall and ceiling mounting Technical data Model TROTEC TDS 75 Item number 1410000025 Maximum heating capacity 15 kW / 15,000 W Heating stage 1 5 kW / 5,000 W Heating stage 2 10 kW / 10,000 W Heating stage 3 15 kW / 15,000 W Fan operation Without heating output Maximum air volume 1,293 m³/h Mains connection 3/N/PE, 400 V / 50 Hz Maximum power consumption 15,000 W Nominal current consumption 21.7 A Mains fuse 32 A Plug type CEE 32 A, 5-pin Thermostat control Integrated, infinitely variable temperature control Protection class IP24 Sound pressure level 60 dB(A) according to product page Operating range -15 °C to +25 °C Dimensions (L × W × H) 332 × 405 × 540 mm Weight 15 kg Minimum distance to walls and objects above 50 cm Minimum distance to walls and objects below 50 cm Minimum distance to the side 50 cm Minimum distance to the front 50 cm Auto-restart function Available Fan run-on function Available Tilt protection Available Air baffle Integrated as standard Wall and ceiling mounting Possible with optional bracket Note: The technical data are based on the available TROTEC product information and the operating manual for the TDS series. The current manufacturer's specifications are binding for the electrical connection, minimum distances and safe operation.

Learn more More Fewer