The B35 CED is a practical, portable oil heater for open, well-ventilated areas. The heater and the oil tank are firmly connected and can be easily transported using the practical carrying handle. The heating output is a powerful 10kW. Unlike indirect oil heaters (e.g. BV77), the B35 CED does not have a separation of exhaust gases and warm air. "If the temperature is to be regulated, the optional thermostat TH5 can be connected directly, which allows the room temperature to be monitored and kept constant." The oil tank holds 15 liters. With a consumption of 0.9 liters per hour, this results in an independent heating operation of 16 hours per tank filling. A standard household socket 230V must be available for the operation of the fan.As with all heating systems of this type, the operating noise is clearly audible.Product features:• Larger air passage• Connection of an additional room thermostat possible• Two oil filters: oil tank filter and intake filter• Motor with overheating protection• Electronic flame control with photo cell• Stainless steel combustion chamber• Fuel tank with level indicator• Easily portable• Easy maintenance• Robust and durable construction   Technical data  Masse (L x B x H) 745 x 300 x 405 mm Weight 14 kg Housing color Metal yellow powder-coated air flow 280 m3/h heating capacity 10 kW Power consumption 230W (Ventilator) insurance 0.35A Motorspannung 220-240 V / 50 Hz operating noise 58 dB(A) tank capacity 15 Liter fuel Diesel / Kerosene consumption per hour 0.9 Liter (= 0.76 kg oil) Operation with a full tank   16 Std. Protection class IP41 Cable Connection cable with EU plug and Swiss fixed adapter guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether at the workplace, in the living area, or in the bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides warmth directly where it is needed by the residents as a supplementary heating solution. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 700W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.72 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.2 A Power consumption max. 0.70 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 605 x 22 mm (without stand feet) Weight 6 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.014 Guarantee 2 years

Learn more More Fewer

High-quality heating blower with 9kW heating power. Made in Italy - no Chinese goods. Robust metal housing with rack and side carrying handles for good stability and easy transport.With the function switch, the device can be set to 1/2 or 1/1 heating power or used only as a fan. A room thermostat maintains the temperature at the set value. When the desired temperature is reached, the heating turns off while the fan continues to run for a constant circulation of the room air.These heaters are excellently suited for heating construction sites, garages, workshops, storage rooms, retail spaces, or even for private hobby rooms and many other applications.   What does the automatic reset function bring?   If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.   Execution of this heating blower • Robust metal housing, yellow powder-coated• continuously variable room thermostat• 2-stage adjustable heating power 4.5 kW / 9 kW• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Pure recirculation operation without heating possible• Comparatively quiet operating noise• Heating elements made of stainless steel• Overheating thermostat• Automatic reset in case of overheating of the control• Motor with thermal protection• CEE plug 5-pole 16 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand     Technical data Heating output: 9 kWStages: only recirculation / 4.5 kW / 9 kWAir volume: 800 m³/hRoom thermostat: continuously adjustable 5 - 35 °CSound level: 51 dB(A) at a distance of 2.5mDimensions (H x W x D): 440 x 420 x 340 mmWeight: 9.3 kgmax. input: 13 AConnection: 400V / 50HzCable / Plug: CEE16A, no cableTest certificates: CEProtection class: IP24Warranty: 3 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

This mobile gas heater is a simple solution for quickly warming ventilated zones and rooms. The heating power is strong and adjustable via a rotary switch.In addition to a commercially available gas bottle (available, for example, at gas station shops), a standard power outlet is required for the operation of the control system and the fan. The delivery includes the ready-to-plug device, including a connection hose with a non-return valve for connecting to the gas bottle.ImportantThe combustion of gas consumes oxygen. Therefore, this heater must not be used in closed, poorly ventilated rooms, especially not in small rooms. Furthermore, a safety distance from flammable materials must be observed. The heater must also not be operated in rooms where the air contains explosive gases.Product features• Manual ignition• Regulator includes a safety valve that stops the gas flow in the event of cracks in the gas line.• Pressure reducer and gas line included in the set• Motor with thermal protection• Overheating thermostat• Adjustable Heat• Robust and durable construction• Easy maintenance• Safety gas valve with thermoelement• Solenoid valve Technical data     33M 53 M  Dimensions ( L x W x H)  552 x 220 x 342 etc   605 x 276 x 444 etc  Weight 9 kg 15 kg  Housing color Metal yellow powder-coated  air flow  1000 m3/h   1450 m3/h  Adjustable heating power  18-33 kW   36-53 kW  insurance 0.26 TO   0.48 TO  Motorspannung 220-240V / 50Hz  Pressure 0.75 - 1.5 bar Gas Propane/Butan guarantee 2 years  

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 1100W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 1.09 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 4.8 A Power consumption max. 1.1 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without stand feet) Weight 9 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.018 Guarantee 2 years

Learn more More Fewer

Trotec TEH 20 T Elektroheizgerät – Profi-Qualität im Industriedesign Fokussierte Warmluft für härteste Einsätze: Robust, stapelbar und präzise regelbar. Das TEH 20 T besticht durch sein funktionales deutsches Industriedesign und ein extrem robustes Stahlblechgehäuse mit Schutzlackierung. Dank des strömungsoptimierten Chassis wird die Heissluft ohne Verwirbelungen gezielt geleitet. Das doppelwandige Gehäuse minimiert die Erwärmung der Aussenhülle, was die Sicherheit im Betrieb deutlich erhöht. Wichtiger Hinweis zum Anschluss (Schweiz): Aufgrund der Leistungsaufnahme (11.4 A) wird das Gerät mit einem T23-Fixadapter geliefert. Dieser passt in T23-Steckdosen (eckige Pole, 13A/16A Absicherung) sowie in Stromverteiler mit T25-Dosen. Er ist nicht mit herkömmlichen Haushaltssteckdosen (T13) kompatibel. Highlights Präzise Steuerung: Stufenloses Thermostat für konstante Raumtemperatur. Trotec Ergo-Griff: Sicherer Halt durch innovative Griffmulde mit Grip-Clip. Stapelsystem: Sicher stapelbar dank praktischer Nuten auf der Oberseite. Wartungsfreundlich: Konstruiert für den langlebigen Profi-Einsatz. Key Facts Heizleistung: 2.5 kW (2150 kcal) Luftstrom: Fokussierter Strahl durch Axial-Ventilator Schlauchanschluss: 155 mm Durchmesser (max. 7m Länge) Sicherheit: Integrierter Überhitzungsschutz (60 °C) Technische Daten Leistung / Stromaufnahme 2.5 kW / 11.4 A (empf. Absicherung 16 A) Netzanschluss 230 V / 50 Hz (2.75 m Kabel inkl. T23-Adapter) Abmessungen (L x B x H) 325 x 260 x 332 mm Gewicht 10.5 kg Schalldruckpegel 62 dB(A) (1 m Abstand) Garantie 2 Jahre

Learn more More Fewer

Dunkelheizstrahler IRD 2400 – Design-Wärme ohne Rotlicht Elegante Wärme für gehobene Aussenbereiche: Kraftvoll, lautlos und absolut blendfrei. Der IRD 2400 ist die perfekte Lösung für Terrassen, Balkone und die Aussengastronomie, wo Ästhetik an erster Stelle steht. Als Dunkelstrahler erzeugt er wohlige Infrarotwärme über eine verdeckte Edelstahl-Heizspirale – ganz ohne das störende rote Leuchten herkömmlicher Geräte. Das hochwertige Aluminium-Design fügt sich nahtlos in jede Architektur ein. Kein Lichteffekt: Ideal für stimmige Beleuchtungskonzepte ohne störendes Rotlicht. Wetterfest (IP55): Staub-, spritz- und strahlwassergeschützt für den Aussenbereich. Allergikerfreundlich: Saubere Wärme ohne Staubaufwirbelung oder Gerüche. Komfortable Steuerung: Inklusive Infrarot-Fernbedienung und 24h-Timer. Hinweis zum Anschluss: Aufgrund der Leistung von 2400W ist eine Absicherung von mind. 13A erforderlich. Das Gerät wird mit 1.8 m Anschlusskabel sowie einem T23-Fixadapter geliefert. Einsatzbereiche Gehobene Aussengastronomie Private Terrassen und Balkone Windgeschützte Aussenbereiche Architektonisch anspruchsvolle Umgebungen Komfort-Funktionen 3 Heizstufen: 0.8 kW / 1.6 kW / 2.4 kW Flexibilität: Wand- oder Deckenmontage (45° neigbar) Wartungsfrei: Kein Röhrenwechsel erforderlich LED-Display: Anzeige der aktuellen Stufe Technische Spezifikationen Max. Heizleistung 2400 Watt (Wirkungsfläche bis 16 m²) Netzanschluss 220 - 240 V, 50/60 Hz (1.8 m Kabel) Gehäuse & Schutzart Aluminium / IP55 Abmessungen (L x B x H) 1460 x 200 x 55 mm Gewicht 11.5 kg Garantie 2 Jahre

Learn more More Fewer

This powerful 20 kW heater, operated via a CEE32 connection, offers excellent value for money. Its high air circulation allows for efficient and extensive heat distribution in the room, making it the ideal solution for continuous operation on construction sites as well as for heating large rooms, halls, and tents. The robust construction and high performance of this heating device ensure a reliable and constant heat supply even under demanding conditions.Execution • Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 10,000 Watts 2 = 20,000 Watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection and protected against splashes and small foreign objects (IPX4)• Stepless temperature control (0 ~ 40 °C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• No oxygen consumption, therefore also suitable for closed indoor spaces -> Maintain safety distances• The plug is located directly on the device (CEE 32A), suitable cables are available from us (CEE32A Q6.0mm²)• TÜV Rheinland "GS" tested as well as certificates CE, EMC, LVD, WEEEMiscellaneous• A five-pole 32 A high-current connection 380V/415V (50/60Hz) with a CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating. How much heating power do I need?As a rough rule of thumb, for closed rooms with normal ceiling height (2.5 m), approximately 1 kW of heating power is required per 10 m². This value depends on insulation and cold drafts in the room.Technical data Heating output 10'000 / 20'000 W Heizart resistance heating Recommended max. room size 250 m² (600 m³) voltage 380 - 400 V / 50 Hz Power consumption max. 20'000 W Connection 32A Fan speeds 1 Air volume ca. 3084 m³ / h Cable length no cable Plug CEE32A plug Dimensions W x H x D 600 x 430 x 380 mm Weight 19.5 kg Protection class IPX4 Thermostat control and Guarantee 2 years

Learn more More Fewer

Dunkelheizstrahler IRD 3200 Das Kraftpaket der IRD-Serie: Unsichtbare Wärme für grosszügige Aussenbereiche bis 21 m². Der IRD 3200 definiert Premium-Wärme neu. Mit beeindruckenden 3200 Watt ist er die ideale Lösung für grossflächige Terrassen oder die gehobene Aussengastronomie. Als Dunkelstrahler verzichtet er komplett auf hellleuchtende Heizröhren. Stattdessen nutzt er eine verdeckte Edelstahl-Heizspirale, um eine gleichmässige, blendfreie Infrarotwärme zu erzeugen, die das architektonische Lichtkonzept nicht stört. Lichtfreies Design: Ästhetische Wärme ohne störendes Rotlicht – perfekt für gehobene Ansprüche. Hochleistung: Effektive Wirkungsfläche von bis zu 21 m² bei 3.2 kW Heizkraft. Wetterfest (IP55): Optimaler Schutz gegen Staub, Spritz- und Strahlwasser im Aussenbereich. Intelligente Steuerung: 3 Heizstufen, 24-Stunden-Timer und LED-Display via Fernbedienung. ⚠️ Wichtiger Installationshinweis (Schweiz):Aufgrund der hohen Leistung von 3.2 kW benötigt dieses Gerät eine Absicherung von mindestens 16 Ampère. Der IRD 3200 wird inklusive 1.8 m Anschlusskabel und T23-Fixadapter geliefert, welcher für entsprechende Starkstrom-Steckdosen (eckige Pole) oder Baustromverteiler ausgelegt ist. Eigenschaften Allergikerfreundlich: Wirbelt keinen Staub auf, geruchs- und lautlos. Wartungsfrei: Keine Röhrenwechsel nötig dank Edelstahl-Heizelement. Montage-Kit: Wand- und Deckenhalterung im Lieferumfang enthalten. Flexibel: Neigungswinkel um 45° verstellbar für präzise Ausrichtung. Heizstufen Stufe 1: 1.07 kW Stufe 2: 2.14 kW Stufe 3 (Max): 3.20 kW Technische Spezifikationen Wirkungsfläche max. 21 m² Gehäuse Aluminium-Design-Gehäuse Abmessungen (L x H x T) 1815 x 200 x 55 mm Gewicht 13.5 kg Elektrische Daten 230V / 13.9A (Absicherung 16A nötig) Garantie 2 Jahre

Learn more More Fewer

This powerful heater (1200-2400 W) is ideally suited for quickly warming limited areas. It is therefore perfect for seating areas, workspaces, patios, conservatories, and also for rapid construction drying. The delivery includes both the large tripod and a wall mount.The 240GT is technically state-of-the-art. It has been developed from the proven know-how of earlier models and enhanced with the latest technology. The "golden tubes" (Golden Tubes) have a seconds-fast warm-up phase and a good deep heat effect. The Golden Tubes also dim after a few seconds, which significantly lessens the impact of ambient light compared to conventional infrared heaters.Complete delivery scope for free-standing installation and wall mounting:The tripod consists of a solid metal base and a 3-part screwed tube, allowing the desired height to be selected between approximately 0.60m, 1.25m, and 1.94m. Additionally, the tilt angle of the spotlight head is adjustable, so that the heat can be optimally directed to the desired area. Wall mounting is also possible. The corresponding bracket is included in the delivery.Easy to use:The heater can be controlled both at the heating head itself and via the included remote control. By pressing a button or using the remote control (included in the package), the desired heating power of 1000/2000W is selected.Properties of this infrared heater:? Two "Golden Tube Heating Tubes" that are currently among the highest quality and most powerful on the market.? Selectable heating power of 1200W or 2400W (each tube has a heating power of 1200W, so one or both tubes can be activated)? High-quality and robust stand base made of stainless steel? Swiveling heating head for precise alignment with the area to be heated? Remote control or direct operation at the heating head itself? Silent heat transfer without air movement, the heating beam is insensitive to wind and weather.? Protection class IP55, also protected against dust in harmful quantities and against water jets from any angle.? Fulfillment of the WEEE standards? "GS" tested and compliant with CE and EMC regulationsImportant:? The spotlight is suitable for wall and floor mounting. However, it must not be mounted on the ceiling.? Plug: the device is equipped with a T23 plug and requires a minimum of 13 Amperes. The suitable socket has square poles (not round). These sockets are usually available in laundry rooms, in new buildings, and construction temporary facilities. Therefore, the plug does not fit into conventional household sockets with 10A. Please check in any case before purchasing whether you have a corresponding socket available. Also, refer to the photo in our image gallery where the plug is depicted.? Protection class IP55: The heater head itself is protected to IP55, which means it is protected against water jets. Therefore, outdoor use is possible. The plug itself must be protected from moisture. The included connection cable is approximately 1.5m long.? Lifespan: The heating tubes have an expected lifespan of up to 5000 operating hours, which corresponds to 5-10 years depending on usage frequency. Due to the high protection against spray water, the internal components are very well sealed. Replacing defective tubes is theoretically possible, but very labor-intensive. Additionally, the water protection is lost during a replacement. Therefore, if the heater has reached the end of its lifespan, it is advisable to replace the entire head.Scope of delivery:? Radiant heater? Tripod? Wall mount? Remote control (2 x AAA batteries not included)Heating lamp usage examples:Heating of: terraces, seating areas, balconies, festival tents, workplaces, construction sites, workshops, agriculture, garages, storage rooms, basements, sheds, gardens and for use in professional and hobby activities, etc.   2 year guarantee Shipping costs for 1 item: from Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart)(akd) Technical dataVoltage: 220V-240V / 50HzPower consumption: max. 2400 WMinimum protection: 13 AProtection class heating head: IP55Dimensions of heating head (H/W/D): 25 x 70 x 23 cmDimensions with tripod (H/W/D): max. 230 cm x 70 cm x 46 cmWeight: 15 kg (complete including stand), 3.7 kg (only heating head)Operation setting: Remote control or directly on the deviceApplication area: up to max. 20m2 indoor area or approx. 10m2 outdoor areaSwiss plug: Yes / T23Guarantee: 2 years

Learn more More Fewer

This high-quality heating blower with a heating power of 15 kW impresses with its robust construction and thoughtful functionality. The stable metal housing is equipped with a rack and side carrying handles that ensure a secure stand and uncomplicated transport. Made in Italy, no Chinese goods. The operation of the device is carried out via an intuitive function switch, which allows you to set the heating power to either 7500 W or 15,000 W. Additionally, a pure recirculation mode is available. An integrated room thermostat ensures a constant temperature by automatically turning off the heating when the set value is reached, while the fan provides continuous air circulation. Thanks to its versatile applications, this heater fan is ideally suited for a wide range of uses, including heating construction sites, garages, workshops, storage rooms, retail spaces, and private hobby rooms.   What does the automatic reset function bring?   If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.   Execution of this heating blower • Robust metal housing, yellow powder-coated• continuously variable room thermostat• 2-stage adjustable heating power 7.5 / 15 kW• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Pure recirculation operation without heating possible• Comparatively quiet operating noise• Heating elements made of stainless steel• Overheating thermostat• Automatic reset in case of overheating of the control unit• Motor with thermal protection• CEE plug 5-pole 32 A on the back of the housing (corresponds to Swiss standard), no connection cable     How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand     Technical data Heating output 15 kW Steps only recirculation / 7.5 kW / 15 kW Air volume 1700 m³/h Room thermostat continuously variable 5 - 35 °C Sound level 52 dB(A) at a distance of 2.5m Masse (H x B x T) 490 x 470 x 350 mm Weight 15 kg Recording max. 22 A Connection 400V / 50Hz Cable / connector CEE32A, no cable Test certificates THIS Protection class IP24 Guarantee 3 years

Learn more More Fewer

Very powerful 22 kW version among the fan heaters! Solidly constructed heating blower with rack. High air circulation distributes heat widely in the room. The device is also suitable for continuous operation on construction sites and for heating large rooms, halls, and tents. execution • Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 11,000 Watts 2 = 22,000 Watts)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection and protected against splashes and small foreign bodies (IP24)• Stepless temperature control (0 ~ 40° C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility due to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• No oxygen consumption, therefore also suitable for closed indoor spaces -> Maintain safety distances• The plug is located directly on the device (CEE 32A), optionally available with a 10m cable (CEE32A Q6.0 mm)   What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.  Miscellaneous • A five-pole 32 A high-current connection 380 V / 415 V (50/60Hz) with CEE32A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating.   How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand   Technical data Voltage: 400V / 50HzPower consumption: 3 levels Only ventilation / 11kW / max. 22kWMaximum protection: 32 ARoom thermostat: 5 - 35°CAir volume flow: approx. 2400 m³/hProtection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection)Operating noise: 1 m distance 58 dB(A) (our measurement)Dimensions with rack (H / W / D): 63 x 55 x 38 cmWeight: 22 kgOperating mode: rotary knobApplication area: up to max. 220 m²Stecker:  CEE 32 AWarranty: 2 yearsSpecial: The plug is located directly on the device. Suitable cables are available from us in various designs.

Learn more More Fewer

The B100 CED is a practical, mobile oil heater for open, well-ventilated areas. The heater is mounted on a rack with wheels, and the oil tank is already securely attached to the wheeled frame. The heating output is a powerful 29kW. Unlike indirect oil heaters (e.g. BV77), the B100 CED does not have a separation of exhaust gases and warm air. "If the temperature is to be regulated, the optional thermostat TH5 can be connected directly, which allows the room temperature to be monitored and kept constant." The oil tank is integrated into a rack with wheels below the heater. It holds 44 liters. With a consumption of 2.7 liters per hour, this results in an independent heating operation of 16 hours per tank filling. For the operation of the fan, a standard household socket 230 must be available."As with all heaters of this type, the operating noise at 82 dB(A) is clearly audible."  Product features:• Larger air passage• Connection of an additional room thermostat possible• Two oil filters: oil tank filter and intake filter• Motor with overheating protection• Electronic flame control with photo cell• Stainless steel combustion chamber• Fuel tank with level indicator• Chassis included• Easily portable• Easy maintenance• Robust and durable construction 2 year guarantee  Technical dataMaster B100 CEDDimensions L x W x H mm: 1075 x 480 x 600Weight: 23 kgColor housing: Metal yellow powder-coatedAir flow rate: 800 m3/hHeating capacity: 29 kWPower consumption: 230W (Fan)Fuse: 1.0 AMotor voltage: 220-240 V / 50HzOperating noise: 82 dB(A)Tank capacity: 44 litersOperating fluid: Diesel / KeroseneConsumption per hour: 2.7 liters (= 2.3 kg oil)Operation with full tank: 16 hrs.Protection class: IP41

Learn more More Fewer

Mit einer hohen Gebläseleistung von maximal 1785 m³/h gewährleistet der starke 18kW Heizlüfter "Trotec TEH 100" die schnelle Beheizung grosser Räume. Für einen sicheren Halt des angeschlossenen Warmluftschlauchs ist das Heizgerät mit einem wärmegedämmten Anschlussstutzen inklusive speziellem Schlauch-Stützring ausgestattet. Ein integriertes Ausblasgitter fördert zusätzlich einen gerichteten Warmluftstrom.Die robuste Konstruktion aus schutzlackiertem Stahlblech birgt ein speziell entwickeltes, strömungsoptimiertes Chassis. Dieses Design maximiert den System-Wirkungsgrad, indem es einen fokussierten Heissluftstrom ohne Verwirbelungsverluste ermöglicht, selbst über Schlauchstrecken von bis zu 15 m. Die robuste Stufenschaltung ermöglicht eine bedarfsgerechte Leistungsdosierung. Stufe eins aktiviert das Gebläse; die Stufen zwei bis vier erhöhen die Heizleistung parallel dazu dreistufig auf den Maximalwert. Das multistapelfähige Elektroheizgerät ist dank einer identischen Stapelnut flexibel und platzsparend mit dimensionsgleichen Modellen, wie dem TEH 70, stapelbar. Dies ermöglicht platzsparende Lagerung und flexible, individuelle Beheizungsaufbauten im Einsatz, wie zum Beispiel 180-Grad-Stapelinstallationen zur Luftverteilung in mehrere Richtungen. Die rundum drehbaren Transporträder erleichtern den Standortwechsel. Bei Stapelinstallationen bieten die Räder, arretiert per Rollstopp-Raste in der Stapelnut, standsicheren Halt.   Technische und Praktische Vorteile im Überblick Besonders strapazierfähige Stahlblechkonstruktion mit widerstandsfähiger Schutzlackierung. Strömungsoptimiertes Chassis für einen fokussierten, verwirbelungsfreien Warmluftstrom. Praktische Stapelnut für standsichere, platzsparende Lagerung und Transport. Doppelwandiges Gehäuse zur minimierten Aufheizung der Aussenummantelung. Extrem wartungsfreundliche Bauart. Robuste Trotec-Ergo-Griffmulden mit innenliegendem Grip-Clip für optimalen Tragekomfort. Praxisoptimiertes deutsches Industriedesign (geschütztes Geschmacksmuster). Multistapelfähigkeit mit dimensionsgleichen Modellen.  Technische Daten Trotec-Artikelnr. 1410000220 Produktinformationen Stapelhöhe max. 3 Lagerfähigkeit stapelbar Ventilatortyp axial   Abmessungen und Gewicht Länge ohne Verpackung 465 mm Länge mit Verpackung 435 mm Breite ohne Verpackung 425 mm Breite mit Verpackung 495 mm Höhe ohne Verpackung 555 mm Höhe mit Verpackung 600 mm Gewicht ohne Verpackung 27.5 kg Gewicht inklusive Verpackung 29.5 kg Durchmesser Schlauchanschluss 300 mm Schlauchlänge max. 15 m   Elektrische und Heizdaten Funktionsprinzip elektrisch Heizelement Edelstahl-Heizspirale Nennstromaufnahme 27.3 A Netzanschluss und -frequenz 400 V, 50 Hz Leistungsaufnahme / Max. Heizleistung 18 kW Empfohlene Absicherung 32 A Kabellänge 0.75 m Anschlussstecker Bezeichnung CEE 32 A | 5-polig Überhitzungsschutz 60 °C   Leistungswerte (Heizleistung / Luftmenge) Max. Luftmenge 1785 m³/h Gebläsestufen 1 Heizleistung Stufe 1 0 kW (Lüfterbetrieb) Heizleistung Stufe 2 9 kW / 7740 kcal Heizleistung Stufe 3 13.5 kW Heizleistung Stufe 4 / Max. 18 kW / 15'480 kcal Max. Temperaturerhöhung (bei 3 m Abstand) 38 °C   Ausstattung und Mobilität Gehäuseausführung Metall Mobilität Trage-/Transportgriff(e), gummibereifte Metallräder Funktionen Ein-/Ausschalter, Überhitzungsschutz Sonstige Daten Schallpegel (bei 1 m Abstand) 73 dB(A) Lieferumfang (Zubehör) Verlängerungskabel, externes Thermostat, Schläuche (Normaltemperatur 300 mm), Universal-Spanngurt

Learn more More Fewer

King class of professional fan heaters!This heating blower is very powerful at 18kW and operates with high voltage at a CEE32A socket. It is exceptionally robust and features a strong, ducted warm air jet with a large throw distance. The blower is single-stage on/off, and at the 18kW heating level, the temperature difference between the intake and exhaust air is about 50 °C, with an air volume of around 1700 m3 per hour!The heating power can be selected in two stages: 9 kW / 18 kW. An optional connectable room thermostat for regulating the desired room temperature as well as hoses for directing the blown air are available. The weight is 27 kg; for easy maneuvering, a guide handle and two large wheels are attached to the housing (a short assembly of the handle and wheels is required).This professional heater fan is ideally suited for various applications:• Heating of construction sites, even in unattended continuous operation• Heating of marquee tents• Heating of garages, operational and production halls• Heating smaller rooms to high temperatures by blowing warm air through a hose• etc.The heater is equipped with an overheating protection and a safety thermostat, which activates the ventilation at intervals after switching off, until the heating has cooled down sufficiently.The device comes with a connected high-voltage cable with a cross-section of 4.0mm2 (length approx. 1.5 m with CEE32A plug) included in the delivery.  Characteristics • Manual reset switch• Connection of a room thermostat possible• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Winter-Summer switch (ventilation operation)• Motor with thermal protection• Overheating thermostat• Made in ItalyMiscellaneous:• Requires a CEE32A socket (red round socket with a diameter of approximately 7.1 cm).• Short assembly required before commissioning.• Suitable extension cables in various lengths are available from us at affordable prices.What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice.   How much heat do I need?   Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand    Technical data   Voltage: 400V / 50 HzPower consumption: 3 levels Only ventilation / 9 kW / 18 kWMaximum protection: 32 ARoom thermostat: optionalAir volume flow: approx. 1700 m³/hProtection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection)Operating noise: 1 m distance 69 dB(A) (our measurement): 2.5 m distance 72 dB(A)Dimensions with rack (L/W/H): 700 x 490 x 530 mmWeight: 27 kgOperating mode: Rotary switch off - only ventilation - 9 kW - 18 kWApplication area: up to max. 180 m² / 450 m³Stecker: CEE 32 AWarranty: 2 yearsSpecial features: Not suitable for room temperatures above 25°C.Option: Room thermostat, air hoses, air distribution attachment for 2 hoses  

Learn more More Fewer

Powerful, mobile oil heater with exhaust pipe. For quick heating of garages, tents, greenhouses. The warm air can be directed into the area to be heated using a hose, while the exhaust gases remain outside. 21 kWDiesel or kerosene

Learn more More Fewer

The mobile oil heaters from Master are suitable wherever a lot of heat is needed temporarily. With a power of 85 kW, this model is very powerful and ensures good heat distribution even in larger areas. With indirect oil heating devices, the exhaust gases from combustion are not simply blown into the room with the warm air, but are cleanly separated and vented through a chimney. The heaters from Master are therefore highly efficient and produce 100% clean, dry, and smoke-free warm air. They are ideally suited for poorly ventilated spaces, such as shops, event tents, food preparation areas, or exhibition halls. For even air distribution, they can be connected to flexible warm air hoses. "For operation, on one hand, diesel or kerosene is needed for heat generation, on the other hand, a socket (standard household socket) is required for the operation of the ventilation and control."  Characteristics   • Clean warm air• Connection to warm air hose possible• exhaust connection• Heat exchanger• Overheating thermostat• run-on time• Motor with overheating protection• Three oil filters: oil pump filter, intake filter, and inlet filter• External transparent oil suction filter • Electronic flame monitoring with photo cell• Stainless steel combustion chamber• Oil level indicator• Chassis included• High-quality fuel pump• Fuel pump with access for easy maintenance• Snorkel for drip-free fuel tank• LED light     Technical data   heating capacity 85 kW (290,000 Btu/h or 73,100 kcal/h) air performance 3'300 m³/h A full tank is enough for 13 Std. thermostat operation Analog or digital consumption 8.1 liters / hour mains voltage 220-240 V / 50 Hz Power consumption 1.06 kW rated current 4.6 A Protection class IP44 tank capacity 105 Liter exhaust pipe connection Ø 150 mm air outlet Ø 410 mm Dimensions (L x W x H) 1600 x 700 x 1150 mm Weight Device 101 kg (Package weight 123 kg) guarantee 2 years

Learn more More Fewer

With the "Master EKO9", the manufacturer addresses the topic of comprehensive room disinfection. Using heat, rooms including furniture can be effectively disinfected against pests and viruses with little effort. No chemicals are used in the process. This means that the rooms are immediately ready for use after treatment. This form of cleanliness is particularly promising in the hospitality industry and in industrial spaces. The only requirement for operating the heaters is a high-voltage power connection.Room disinfection against viruses and bacteriaNumerous studies have shown that viruses and bacteria can be eliminated with heat treatments, usually around 60°C, for example:  Coli bacteria: 60 °C / 10 minutes (Source: Loeffler 1886)Typhus: 56°C / 10 minutes (Source: Sternburg 1887)Cholera: 55°C / 15 minutes (Source: Kitasato 1889)Tuberculosis: 63°C / 3 minutes (Source: North & Park 1925)Pest: 60°C / 2 minutes (Source: Gladin 1898)A complete inactivation of the SARS virus, which is structurally very similar to the current coronavirus, was demonstrated after 60 minutes at 67°C (Source: "Stability of SARS Coronavirus in Human Specimens and Environment and Its Sensitivity to Heating and UV Irradiation", Biomedical and Environmental Sciences 16, 246-255 October 2003).Although there are no certified studies available on the SARS-COV-2 (Corona) virus, it is reasonable to assume that disinfection at higher temperatures is likely here as well. According to reports from "REHVA" and "The Lancet Microbe" from April 2020, Chinese laboratories have deactivated the SARS-COV-2 virus (responsible for COVID19) at these temperatures and treatment times:At 56 °C: after 30 minutesAt 70 °C: after 5 minutes  Room disinfection against pestsAs is well known, private apartments and bedrooms, as well as hotels (especially those of a higher category), are often and almost unnoticed infested with pests in mattresses, carpets, and curtains. In addition to chemical treatment, disinfection with heat has also proven to be effective here. As with viruses and bacteria, it is sufficient to heat the room to about 60 °C for a certain period of time. However, insects are not stupid. If the temperature rises too quickly, they change their location. Therefore, it is important that the heat is not generated immediately from zero to a hundred, but is built up over a certain time interval. If the temperature rises slowly, the pests remain in the room and are killed along with their eggs and larvae. In the heat disinfection of furniture, it is crucial that the inventory is brought to the desired temperature down to the core over a certain period of time.With the "Master EKO9", these problems can be solved quickly, cost-effectively, and, if necessary, with the required discretion: The operator can choose the desired target temperature for the treatment. The heating operation then starts, with the software gradually increasing the room temperature by 15°C and holding the intermediate levels for a certain period of time. This prevents the temperature from rising too quickly as described above. The "Master EKO9" also has a measuring probe that can be placed in hard-to-reach areas (for example, in gaps between a sofa or mattress) and measures and monitors the effective core temperature similarly to grilling. application examples• Hotel industry• Medicine, medical practices, hospitals• Industry• Public transport, aviation• Army, Civil Protection• private households• etc.  Thermostatssafety thermostat"switches off the heating device completely when the indoor temperature exceeds 90 °C (heating must be restarted manually)."limiting thermostat"turns off the heating device when the air outlet temperature reaches 75 °C and turns on the heating device when the air outlet temperature drops below 72 °C (automatic process)."    Technical data  Performance 9 kW stages 1 air volume flow 1400 m³ / h room thermostat digital Masse (L x B x H) 550 x 606 x 921 mm Weight 35 kg Power consumption 13.8 A max. power connection 400 V / 50Hz connection cable not included in the delivery scope Plug CEE16A selectable temperature range 0 - 60 °C Operating noise at a distance of 2.5m   72 dB(A) guarantee 2 years  

Learn more More Fewer