Here you will find a large selection of adsorption dryers for commercial and residential buildings.
Dehumidifiers with adsorption technology are suitable for keeping individual rooms or entire buildings dry, especially in cold temperatures. They can also be integrated into ventilation circuits to dry the air before it is released into the rooms.
Products
Master B18EPR Master Heater Fan 18kW
King class of professional fan heaters!This heating blower is very powerful at 18kW and operates with high voltage at a CEE32A socket. It is exceptionally robust and features a strong, ducted warm air jet with a large throw distance. The blower is single-stage on/off, and at the 18kW heating level, the temperature difference between the intake and exhaust air is about 50 °C, with an air volume of around 1700 m3 per hour!The heating power can be selected in two stages: 9 kW / 18 kW. An optional connectable room thermostat for regulating the desired room temperature as well as hoses for directing the blown air are available. The weight is 27 kg; for easy maneuvering, a guide handle and two large wheels are attached to the housing (a short assembly of the handle and wheels is required).This professional heater fan is ideally suited for various applications:• Heating of construction sites, even in unattended continuous operation• Heating of marquee tents• Heating of garages, operational and production halls• Heating smaller rooms to high temperatures by blowing warm air through a hose• etc.The heater is equipped with an overheating protection and a safety thermostat, which activates the ventilation at intervals after switching off, until the heating has cooled down sufficiently.The device comes with a connected high-voltage cable with a cross-section of 4.0mm2 (length approx. 1.5 m with CEE32A plug) included in the delivery. Characteristics • Manual reset switch• Connection of a room thermostat possible• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Winter-Summer switch (ventilation operation)• Motor with thermal protection• Overheating thermostat• Made in ItalyMiscellaneous:• Requires a CEE32A socket (red round socket with a diameter of approximately 7.1 cm).• Short assembly required before commissioning.• Suitable extension cables in various lengths are available from us at affordable prices.What does the automatic reset function bring? If a heater measures a temperature that is too high in the control system, an overheating protection is triggered. In this case, the ventilation continues to run, but the heating operation is interrupted. In cheaper models, this protection must be released mechanically. Normally, this is done by pressing the release switch ("Reset" switch) with a pointed object. In this heater, the protection automatically resets as soon as the measured temperature in the control system returns to the normal level. Since not all users are aware of this process, the automatic reset function is a significant advantage in practice. How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms. Here you go to the online calculator: Calculate heat demand Technical data Voltage: 400V / 50 HzPower consumption: 3 levels Only ventilation / 9 kW / 18 kWMaximum protection: 32 ARoom thermostat: optionalAir volume flow: approx. 1700 m³/hProtection class: IP24 (foreign body protection with Ø > 12.5 mm + splash water protection)Operating noise: 1 m distance 69 dB(A) (our measurement): 2.5 m distance 72 dB(A)Dimensions with rack (L/W/H): 700 x 490 x 530 mmWeight: 27 kgOperating mode: Rotary switch off - only ventilation - 9 kW - 18 kWApplication area: up to max. 180 m² / 450 m³Stecker: CEE 32 AWarranty: 2 yearsSpecial features: Not suitable for room temperatures above 25°C.Option: Room thermostat, air hoses, air distribution attachment for 2 hoses
Fr. 890.00
Master B35CED Master mobile oil heater 10 kW
The B35 CED is a practical, portable oil heater for open, well-ventilated areas. The heater and the oil tank are firmly connected and can be easily transported using the practical carrying handle. The heating output is a powerful 10kW. Unlike indirect oil heaters (e.g. BV77), the B35 CED does not have a separation of exhaust gases and warm air. "If the temperature is to be regulated, the optional thermostat TH5 can be connected directly, which allows the room temperature to be monitored and kept constant." The oil tank holds 15 liters. With a consumption of 0.9 liters per hour, this results in an independent heating operation of 16 hours per tank filling. A standard household socket 230V must be available for the operation of the fan.As with all heating systems of this type, the operating noise is clearly audible.Product features:• Larger air passage• Connection of an additional room thermostat possible• Two oil filters: oil tank filter and intake filter• Motor with overheating protection• Electronic flame control with photo cell• Stainless steel combustion chamber• Fuel tank with level indicator• Easily portable• Easy maintenance• Robust and durable construction Technical data Masse (L x B x H) 745 x 300 x 405 mm Weight 14 kg Housing color Metal yellow powder-coated air flow 280 m3/h heating capacity 10 kW Power consumption 230W (Ventilator) insurance 0.35A Motorspannung 220-240 V / 50 Hz operating noise 58 dB(A) tank capacity 15 Liter fuel Diesel / Kerosene consumption per hour 0.9 Liter (= 0.76 kg oil) Operation with a full tank 16 Std. Protection class IP41 Cable Connection cable with EU plug and Swiss fixed adapter guarantee 2 years
Fr. 429.00
WDH Bautrockner mit Pumpe WDH-R180B
Mit seiner kräftigen Entfeuchtungsleistung meistert dieser Profi-Bautrockner auch anspruchsvolle Aufgaben. Die integrierte Kondensatwasserpumpe sorgt für einen komfortablen Betrieb, da das anfallende Wasser automatisch abgeleitet wird. Zusätzlich erhalten Sie weitere Profi-Funktionen wie ein Betriebsstundenzähler, eine Temperaturanzeige, eine Feuchtigkeitsanzeige sowie eine automatische Abtau-Funktion. Gemessen an seiner Entfeuchtungskraft ist er sparsam im Verbrauch und verfügt über das neue Kältemittel "R290", welches die Umwelt kaum noch belastet. So liegt das "Global Warming Potential (GWP)" bei einem Wert von 3, was gegenüber vergleichbaren Modellen früherer Generationen einer Reduktion von 99.85% entspricht. Bedienung Das Bedienerfeld liegt vorne am Gehäuses und bietet verschiedene Möglichkeiten: Einstellung Zielfeuchte per Tastendruck wird die gewünschte Zielfeuchte eingestellt, also der Wert, auf den das Gerät den Raum stabil halten soll. Ist die gemessene Feuchtigkeit im Raum höher, läuft der Betrieb. Stimmt die Feuchte, pausiert das Gerät, wobei nicht nur der Kompressor, sondern auch der Lüfter stoppt. Die gewünschte Zielfeuchte kann in 5 %-Schritten zwischen 10 - 90 % gewählt werden, wobei die Einstellung auf 10 % Dauerbetrieb entspricht. Um einen Raum vor Schimmel und Gerüchen zu schützen, reicht ein Wert von ca. 60%, ideale Einstellung ist also 50 oder 55%. Tiefere Werte bringen keinen zusätzlichen Vorteil, es sei denn, man trocknet Wasserschaden. Timer Mit dem Timer kann der Betrieb entweder "ab jetzt" zeitlich limitiert werden (1-24 Stunden) oder auf einen Zeitpunkt 1-24 Stunden in die Zukunft gestartet werden, zum Beispiel dann wenn man den Betrieb auf den Niedertarif starten möchte. Memory-Funktion Wenn man das Gerät jeden Tag zu gleichen Uhrzeiten laufen lassen möchte (zum Beispiel im Niedertarif), dann kann man das mit einer handelsüblichen Zeitschaltuhr/Timer machen. Der Trockner merkt sich die letzte Einstellung und kommt nach Stromunterbruch mit unveränderten Einstellungen zurück. Pumpe Anstelle eines Eimers ist bei diesem Modell eine Wasserpumpe integriert, welche das entzogene Kondensat wegpumpt. Der im Lieferumfang enthaltene Schlauch ist 7.5m, kann aber auch verlängert werden. Wenn der Schlauch flach verlegt wird, kann das Wasser problemlos Distanzen bis 20 m bewältigen. Bei Abpumpen in die Höhe verringert sich die mögliche Distanz je nach Höhendifferenz. Ein Rückschlagventil verhindert dabei, dass im Schlauch stehendes Wasser ins Gerät zurückfliesst. Im Gerät selbst befindet sich ein kleiner Tank, welcher vor dem Transport per Tastendruck vollständig ausgepumpt werden kann. Vorteile im Überblick Entfeuchtungsleistung von bis zu 65 Ltr./Tag Professioneller Betriebsstundenzähler für die Kontrolle der Einsatzdauer Im Lieferumfang sind 7.5 Meter Kondensschlauch inkl. einem Rückschlagventils enthalten Temperaturanzeige (Eingang / Ausgang) zur Überwachung der Umgebungsbedingungen Integrierte Pumpfunktion, mit der Sie das Kondensat bis zu 3 Meter Förderhöhe abpumpen können Automatischer Betriebsfortlauf nach einem Stromausfall Ausgestattet mit einem hocheffizienten Rotationskompressor für maximale Leistung und Energieeffizienz Übersichtliches LED-Display inkl. Feuchtigkeitsanzeige für einfache Bedienung und Kontrolle Feuchtigkeitsregelung in 5% Schritten zwischen 10% bis 90% für präzise Trocknungsergebnisse Automatische Profi Defrost Funktion zur Vermeidung von Eisbildung im Kühlsystem Timer Funktion pro Stunde für flexible Trocknungsdauer Stapelbar zum Platzsparen für einfachen Transport und Lagerung Zwei semi-pneumatisch Reifen, für einfachen Transport CE (EMC + LVD) Konformität sowie "GS" geprüft. Lieferumfang Bautrockner Netzkabel Kondensatschlauch mit Rückschlagventil Bedienungsanleitung Entfeuchtungsleistung Der Trockner ist über ein breites Temperaturspektrum zwischen +5°C bis +35°C einsetzbar, wobei wie bei allen Kondensationstrocknern die Entfeuchtungskraft in kühlerer Umgebung abnimmt. Beispiele der ungefähren Entfeuchtungsleistung bei verschiedenen (konstanten) Umgebungsbedingungen: 30 °C: 80 % feucht: 65 Liter / 24 Std. - 60 % feucht: 42 Liter / 24 Std. 20 °C: 80 % feucht: 32 Liter / 24 Std. - 60 % feucht: 24 Liter / 24 Std. 15 °C: 80 % feucht: 23 Liter / 24 Std. - 60 % feucht: 17 Liter / 24 Std. 10 °C: 80 % feucht: 13 Liter / 24 Std. - 60 % feucht: 12 Liter / 24 Std. Technische Daten Spannung 220-240V / 50Hz Leistungsaufnahme max. 850 (3.7 A) resp. 710W (3.1 A) bei 20°C/60% r.F. Schalldruckpegel 55 dB(A) (Angabe Hersteller) Entfeuchtungsleistung max. 65 Liter/Tag (30°C / 80% r.F.) Umluftmenge 350 m³/h, 1 Ventilationsstufe Kondenstank Kein Tank, integrierte Pumpe mit 7.5 m Schlauch Kompressor Rotationskompressor Kältemittel R290C (250gr.) Abmessung (H x B x L) 470 x 325 x 600 mm Gewicht: 39 Kg Betriebseinstellung: Digitales Bedienerfeld Umgebungstemperatur: 5°C ~ 35°C Einsatzbereich: bis 150 m² Schweizerstecker: EU-Stecker mit Fix-Adapter für die Schweiz Schlauchanschluss: Ja Garantie: 2 Jahre
Fr. 869.00
TROTEC Trotec TTK125S Dehumidifier
Professional construction dehumidifier with large bucket A high-quality dehumidifier for commercial use and water damage drying, manufactured in Europe. Its impressive exterior appearance is matched by its internal values: all electrical components are specially encapsulated, protecting the electronics from harmful deposits that could impair their function and longevity. Therefore, this dryer is also ideally suited for use under demanding conditions. Thanks to its maintenance-friendly design, it is easy to care for. "Compared to more affordable piston compressors, the high-quality 0.58 kW rotary compressor installed here offers the advantage of higher performance with comparatively lower power consumption – and additionally provides reserves for high dehumidification performance even in unheated rooms."In addition, the high-quality hot gas defrosting automatic system ensures a much more efficient dehumidification performance compared to other defrosting devices, without time interval-related defrosting pauses during which no dehumidification takes place. Propane (R290) as an environmentally friendly refrigerant in dehumidifiers Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3). Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs. User-friendly Thanks to its durable housing, ergonomic grip recesses with an internal grip clip, and four sturdy wheels with a roll stop, the device is ideally suited for use on construction sites and for drying water damage. However, these advantages are also appreciated in commercial spaces or in private basement environments. The storage is also well thought out: two practical stacking grooves on the top of the device allow for a stable and space-saving stacking during transport and in storage. An integrated operating hour meter reliably documents the exact duration of use even during longer drying operations. Integrated compressor thermal protection with automatic shut-off In drying operations with extremely high humidity and simultaneously high temperatures – for example, during water damage restoration – refrigerant dryers quickly enter their red performance zone. Here, the catchy "35 rule" applies: water damage above 35 degrees reduces the dryer’s lifespan to below 35%. However, this is not a question of component quality, but pure physics, which applies independently of the manufacturer to all refrigerant dryers on the market. While most professional condensate dryers can still operate without issues at moderate humidity around 70% r.F. up to 35 °C, very high humidity combined with high room temperature results in significantly more energy being supplied to the humid air, which must be additionally "processed" through the refrigerant. Consequently, the pressure of the refrigerant in the system increases immensely, leading to a destructive load on the compressor. Although the dehumidifiers will initially continue to operate, they will do so well beyond their limit "deep in the dark red zone," resulting in an extremely shortened remaining lifespan. "Therefore, the commercial dehumidifiers of the TTK-S series are equipped with an integrated compressor thermal protection for the active preservation of your devices:"Sensors continuously monitor the thermal load of the compressor. If the temperature is within the defined operating range, the integrated heat protection indicator pulses in a long sequence, indicating optimal operation of the dehumidifier. As soon as the temperature exceeds the critical threshold of 35 °C, the automatic system switches off the compressor to protect it, while the fan continues to operate, and automatically reactivates the compressor as soon as the 35° threshold is fallen below again. This protection not only significantly extends the lifespan of the dehumidifiers, but also prevents thermal damage to materials in the room and the building structure during their use. Options • Dual meter available for additional recording of electricity consumption.• high-performance condensate pump for permanent drying with a pumping capacity of up to 50 m distance and a maximum delivery height of 4 m Advantages at a Glance • High dehumidification performance even at low temperatures • Maximum dust and moisture protection for all electrical components• Extremely maintenance-friendly design • Optimal handling characteristics • Thanks to the roll piston compressor, it is transportable and storable in any position. • Practical stacking groove for stable, space-saving storage and transport • Multistage capability with identical models• Practice-oriented industrial design• Made in Europe Technical data dehumidification performance at 30 °C / 80 % r.H. 28 liters / day air volume 250 m³/ h Maximum room size 70 m² (175 m³) Minimum room size 8 m² (30 m³) temperature range 5 - 32°C moisture range 35 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.3 A Power consumption max. 500W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R290 (150g) GWP3 water bucket 6 Liter operating noise 52 dB(A) at 1 m distance 49 dB(A) at a distance of 2.5 m Dimensions L x W x H 375 x 345 x 603 mm Weight 26 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes, short hose piece included in the delivery guarantee 2 years
Fr. 1'090.00
WDH Drying device WDH-50B with consumption meter (kWh)
Powerful air dehumidifier / construction dryer 50B-WDH with calibrated consumption meter.The "50B" has been specifically designed to quickly dry water damage, e.g. after flooding or inundations. It features a very strong dehumidification performance and only has a power switch for optimal operation on construction sites and during water damage drying. A hygrometer for regulating the target humidity has been deliberately omitted in this version. Recommended room size up to 120m², from 8°C. The performance and drying speed can be additionally accelerated with free-standing fans if needed (e.g. FN45 from our range).Characteristics • Dehumidification capacity of up to 42 liters / day (at 30°C/80% r.H.)• Function for continuous operation/continuous dehumidification• calibrated consumption meter (kWh)• On/Off toggle switch• Equipped with a highly efficient rotary compressor. This compressor is one of the most powerful compressors on the market.• Automatic professional defrost function• Removable condensate tank• Connection possibility of a hose for continuous drainage of the condensate• Powder-coated metal housing/metal frame• Very easy mobility due to transport handles and large running wheels for safe travel over steps and uneven ground.• Operating warning light / Defrost light• No separate or additional coolant is required (closed circuit)• Washable air filter grid• Environmentally friendly refrigerant R290• CFC free and compliance with WEEE standards ImportantThe construction dryer "50B" is not suitable for use in very cold rooms, as it can freeze during continuous operation below 8°C due to the powerful dehumidification unit. dehumidification performanceThe dryer is via a Temperature range from +8°C to +32°C is applicable, whereby, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C/80% r.H.: approx. 42 liters (at 60% r.H.: approx. 21 liters)20°C/80% r.H.: approx. 21 liters (at 60% r.H.: approx. 12 liters)15°C/80% r.H.: approx. 15 liters (at 60% r.H.: approx. 8 liters)10°C/80% r.H.: approx. 8 liters (at 60% r.H.: approx. 6 liters)(r.H.=relative humidity)Technical data Tension 220-240V / 50Hz Power consumption: max. 820 (3.7 A) or 620W (at 20°C/60% r.H.) Sound pressure level: 57 dB(A) (Manufacturer's specification) dehumidification performance 42 liters/day (30°C / 80% r.H.) amount of recirculated air 400 m³/h (installed) condensate tank approx. 5 liters (direct hose connection possible) Compressor Rotary compressor refrigerant R290 (230gr.) Dimensions (H x W x D) 890 x 450 x 740 mm Weight 32 Kg cessation of operations ON/OFF toggle switch Ambient temperature 8°C ~ 32°C Area of application Rooms from min. 10m² to max. 120m² Swiss plug: EU plug with fixed adapter for Switzerland hose connection Yes guarantee 2 years
Fr. 649.00
WDH BGP02 WDH Heater Fan 2kW
A handy electric heater with very good heat efficiency thanks to the ceramic heating element. This allows the heater to reach the desired heating output with a short warm-up time. At the high heating level of 2000 W, the blown air is heated to more than 60 °C above room temperature. The temperature controller has a wide range starting from 0 °C. The BGP can thus also be used as a frost guard when the room temperature needs to be kept just above freezing.The ventilation is rather mild at about 120 m³/h compared to other electric heaters in this category; however, the BGP is hardly audible in terms of operating noise thanks to the quiet radial fan. This model is therefore suitable not only for use in construction and industry but also for heating quiet areas such as waiting rooms, living rooms, or simply for keeping your feet warm under the office desk. The housing is made of a black, fireproof plastic and a metal rack with a practical carrying handle. The fan head can be rotated vertically in a large radius up to 90°, allowing the warm air to be directed precisely to the desired location. With the help of two standard hooks, the device can even be hung on a wall (hooks not included in the delivery).The heater has two rotary controls at the top of the housing:• left step controller: only ventilation / 1200 W / 2000 W• right: stepless thermostat for regulating the desired temperatureAdditionally, there is an operating light located between the two controls that indicates when the heating operation is running."If the temperature is correct, the heating pauses (the ventilation also stops). If the temperature falls below the set value, the operation starts automatically."The adjustable range of the temperature controller is from 0° to 85°C, with an overheating protection that interrupts the heating operation at a room temperature of just over 40°C.Due to the high exhaust temperature, the device should not be placed within reach of children or pets, although the solid front grill of this model poses significantly less risk of burns than similar fan heaters, which only have a metal grid for air exhaust. How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand Technical data Voltage: 220V-240V / 50HzHeating levels: 2 levels 1200 W / 2000 W + pure fan level: 25 WMinimum protection: 9.1 ARoom thermostat: continuously adjustable 0 - 85 °CAir volume flow: only one fan stage our measurement: 120 m³/h(Manufacturer's specification: 170 m³/h)Protection class: IP20operating noise(our measurement): 1 m distance: 39 dB(A)2.5m distance : 36 dB(A)Dimensions: Height with handle: 32 cmWidth: 30 cmDepth: 25 cmWeight: 3.1 KgOperating mode: rotary knobApplication area: up to max. 25 m²Swiss plug: Yes + 1.30 m connection cableWarranty: 2 years
Fr. 79.00
WDH BGP09 WDH Heater Fan 9kW
Powerful construction heater with 400V / 16A connection for heating construction sites and industrial rooms. Very good price / performance ratio with easy handling. The device is very effective and made almost entirely of metal, making it extremely robust. The connection cable of about 1m length and the CEE16A plug are included in the delivery. As accessories, we offer extension cables in various lengths at affordable prices.WDH® is a quality product and a brand that is almost exclusively available through specialized retailers. Quality standards include, for example: durability, compliance with the specified performance, TÜV "GS" certified, of course with CE conformity, recyclable materials, etc.The WDH 9kW series is optimized according to the latest state of technical knowledge. Advantages at a Glance • Heating power adjustable up to 9000 watts (9 kW)• Thermostat for regulating and setting the desired temperature• Two heating strengths selectable (1 = 4500 watts 2 = 9000)• Pure fan operation possible even without heating function• Also suitable for continuous operation• Overheating protection as well as protected against splashes and small foreign bodies (IP24) • Stepless temperature control (0 ~ 45° C)• Integrated protection mechanism against overheating, as well as reset function• No interruptions during power failure (device continues from where it was interrupted)• Very light mobility thanks to handy carrying handles• The device is immediately ready for use (no installation or assembly required)• Quiet operation• No oxygen consumption• Tested by Intertek "GS" and CE compliant• WEEE Standards Miscellaneous • A five-pole 16 A high-voltage connection 380-400 V (50 / 60 Hz) with CEE16A plug is required for the operation of this heating device. • As with all high-power heating fans, the heating operation stops when the set target temperature is reached, while the ventilation continues to run to prevent overheating. usage examplesTemperature regulation: Construction sites, workshops, agriculture, apartments, garages, warehouses, cellars, sheds, garden houses, laundry rooms, and for use in professional and hobby activities, etc. Additionally, also ideal as a frost guard.Drying: Ideal for faster drying of plaster, screed, etc. (Work can be continued or applied very quickly)Damp Rooms: Ideal for damp basements, old walls, and drying all damp objects.Damage Removal: After flooding, after damage from extinguishing water, or in case of decay, these devices are ideally suited to support the drying process. How much heat do I need? Our free heat demand calculator helps you determine the required heating power for your rooms.Here you go to the online calculator: Calculate heat demand Technical data Voltage: 380V - 400 V / 50HzPower consumption: 2 levels 4.5 kW / max. 9 kWMaximum protection: 16 ARoom thermostat: 0 - 45 °CAir volume flow: 660 m³/hProtection class: IP24(Foreign body protection with ø > 12.5 mm + splash water protection)Dimensions (H/W/D): 43 x 30 x 39 cmWeight: 9.7 kgOperating mode: rotary knobApplication area: up to max. 90 m²Stecker: CEE 16 AWarranty: 2 yearsSeries: WDH-BGP09Special: 1.15 m connection cable included in the delivery
Fr. 179.00
Master Bio Cooler Master BC 121 - Evaporative Cooler
Improve the working conditions in your factory, hangar, or workshop with our mobile evaporative coolers. They provide an efficient and cost-effective way to create a refreshing and productive environment for your employees and customers. Important functions Efficient and durable spot cooler for industrial applications Quiet operation even with high air flow Standard automatic swivel function Large water tank for long operation Large, durable wheels with brakes enable easy movement. Manually connect the water hose or water tank and provide your employees with comfort. Corrosion-resistant plastic housing Including air filter for easy maintenance Remote control for easy speed adjustment UV lamp that disinfects the water Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Nearly maintenance-free equipment How does it work? The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates, and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance. Evaporative cooling and humidity A certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity. "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air." "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out." Application examples Agriculture for cooling livestock barns Construction for outdoor events and cooling of marquee tents Cooling of industrial and production halls Cooling of terraces and garden restaurants Rental Technical data Air performance: 12000 m³/h Loaded Airflow: 8000 m³ Maximum area: 250 m² Energy consumption: 500 W Mains voltage: 220-240 V /50 Hz Rated current: 2,3 A Water consumption: 8-10 liters per hour Tank capacity: 80 Liter Direct water connection: ½ inch Water status indicator: Yes Sound level: 67 dB(A) Device dimensions (LxWxH): 1050 x 600 x 1460 mm Net / Gross Weight: 50/55 kg Cooling filter volume: 0.08 m³ Guarantee: 2 years
Fr. 2'477.00
Master Bio Cooler Master BC 221 - Evaporative Cooler
Cool your factory, hangar, or workshop for little money. Our mobile evaporative coolers offer a cost-effective alternative to traditional air conditioning and create a pleasant working environment for your employees or customers. Important functions Efficient and durable spot cooler for industrial applications Quiet operation even with high air flow Standard automatic swivel function Large water tank for long operation Large, durable wheels with brakes enable easy movement. Manually connect the water hose or water tank and provide your employees with comfort. Corrosion-resistant plastic housing Including air filter for easy maintenance Remote control for easy speed adjustment UV lamp that disinfects the water Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Almost maintenance-free equipment How does this work?The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance. Evaporative cooling and humidityA certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity. "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air." "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out." Technical Data BC 221: Kühlfilter dm³: 120 Air performance m³/h: 22,000 Loaded air flow m³/h: 15,000 Maximum area m²: 330 Energy consumption W: 800 Mains voltage V/Hz: 220-240/50 Rated current A: 3.7 Water consumption l/h: 12-18 Tank capacity l: 120 Direct water connection size: ½" Water status indicator: Yes Sound level dB(A): 67 Device dimensions (L x W x H) mm: 1230 x 640 x 1730 Net / Gross weight kg: 64/69 Suitable for: agriculture Automobile Buildings and commercial spaces construction industry emergency services Events and temporary buildings Industry and Production Leisure and Recreation Defense and Aerospace Rental and Leasing
Fr. 2'973.00
Master Bio Cooler Master BC 341 - Evaporative Cooler
The BC 341 offers an innovative solution for the air cooling of large areas. With integrated UV light for hygienic air and minimal energy consumption, it is perfectly suited for rooms up to 400 m², where conventional air conditioning systems reach their limits. Important functions Powerful air volume of 30,000 m³/h for cooling large work areas No installation required, no hoses need to be laid. Low operating costs Easy maintenance Evaporation filter mats that retain dirt UV lamp that disinfects the water Low energy consumption – 1.3 kW Ideal for workshops and warehouses, plastic, glass, assembly plants and paint shops, agriculture, greenhouses, and aircraft hangars. Advantages of Evaporative Cooling The use of master air coolers significantly reduces CO?-emissions compared to air conditioning systems. Clean air that reduces the risk of bacteria and viruses No chemicals or refrigerants Low energy consumption Nearly maintenance-free equipment How does it work?The heart of the evaporative cooling system is the cooling pad: Here, the water evaporates, and the air flowing through the pad is cooled. Evaporative cooling pads are made from grooved cellulose plates that are glued together. The material is chemically treated with special components to prevent rot and ensure a long lifespan and easy maintenance. Evaporative cooling and humidityA certain volume of air at a specific temperature and pressure can absorb and hold a certain amount of water vapor. When this volume of air contains 50% of the moisture it is capable of holding in total, we refer to it as 50% relative humidity. "The hotter the day, the drier the air, the more cooling can occur through evaporation. In other words, the cooling effect is greatest when you need it the most." "Our evaporative coolers are designed to work well even in high humidity environments, and they are much more effective than a simple fan that just circulates warm air." "Depending on the temperature and humidity of the environment you want to cool, our coolers will increase the humidity by 2 to 5%. The slight increase is not noticeable in ventilated areas where the air produced by the device is blown out." Technical Data BC 341: Kühlfilter dm³: 340 Air performance m³/h: 30,000 Loaded air flow m³/h: 23,000 Maximum area m²: 400 Energy consumption W: 1050 Mains voltage V/Hz: 220-240/50 Rated current A: 4.9 Water consumption l/h: 10-15 Tank capacity l: 200 Direct water connection size: ½ Water status indicator: Yes Sound level dB(A): 70 Device dimensions (L x W x H) mm: 1690 x 920 x 1910 Net / Gross weight kg: 130/140 Suitable for: agriculture Automobile Buildings and commercial spaces Construction Emergency services Events and temporary buildings Industry and Production Leisure and Recreation Defense and Aerospace Rental and Leasing
Fr. 4'335.00
Aircenter Boneco Ionic Silver Stick A7017.
Fr. 43.55
Aircenter Briden - Hose Clamps Ø200mm
Long metal clamps for securing air hoses to fans, air blowers, and heat blowers. Opening / tightening is done with a slotted screwdriver.The bells are infinitely adjustable: Size: for diameter Ø194 - 216 mm, width 12mm Further available size for diameter Ø289 - 311 mm, width 12mm
Fr. 5.00