With its powerful dehumidification capacity, this professional construction dryer can handle even demanding tasks. The integrated condensate pump ensures comfortable operation, as the accumulated water is automatically drained. In addition, you get other professional functions such as an hour meter, a temperature display, a humidity display, and an automatic defrost function.
Measured by its dehumidification power, it is economical in consumption and features the new refrigerant "R290", which hardly pollutes the environment. The "Global Warming Potential (GWP)" is 3, which corresponds to a reduction of 99.85% compared to similar models of previous generations.
Operation
The control panel is located on the front of the housing and offers various options:
Setting target humidity
the desired target humidity is set by pressing a button, i.e., the value at which the device should keep the room stable. If the measured humidity in the room is higher, the operation runs. If the humidity is correct, the device pauses, stopping not only the compressor but also the fan. The desired target humidity can be selected in 5% increments between 10 - 90%, with the setting at 10% corresponding to continuous operation. To protect a room from mold and odors, a value of approx. 60% is sufficient, so the ideal setting is 50 or 55%. Lower values do not provide any additional benefit unless you are drying water damage.
Timer
With the timer, operation can either be time-limited "from now on" (1-24 hours) or started at a time 1-24 hours in the future, for example, if you want to start operation at the off-peak tariff.
Memory function
If you want the device to run at the same times every day (e.g., during off-peak hours), you can do so with a standard timer switch. The dryer remembers the last setting and returns with unchanged settings after a power interruption.
Pump
Instead of a bucket, this model has an integrated water pump that pumps away the extracted condensate. The hose included in the scope of delivery is 7.5m but can also be extended. If the hose is laid flat, the water can easily cover distances of up to 20m. When pumping upwards, the possible distance decreases depending on the height difference. A check valve prevents water standing in the hose from flowing back into the device. There is a small tank in the device itself, which can be completely pumped out by pressing a button before transport.
Advantages at a glance
- Dehumidification capacity of up to 65 Ltr./day
- Professional hour meter for monitoring operating time
- 7.5 meters of condensate hose including a check valve are included in the scope of delivery
- Temperature display (inlet/outlet) for monitoring ambient conditions
- Integrated pump function, allowing you to pump condensate up to 3 meters in height
- Automatic operation continuation after a power failure
- Equipped with a highly efficient rotary compressor for maximum performance and energy efficiency
- Clear LED display including humidity display for easy operation and control
- Humidity control in 5% increments between 10% and 90% for precise drying results
- Automatic professional defrost function to prevent ice formation in the cooling system
- Timer function per hour for flexible drying duration
- Stackable for space-saving for easy transport and storage
- Two semi-pneumatic tires for easy transport
- CE (EMC + LVD) conformity and "GS" tested.
Scope of delivery
- Construction dryer
- Power cable
- Condensate hose with check valve
- Instruction manual
Dehumidification capacity
The dryer can be used over a wide temperature range between +5°C to +35°C, although, as with all condensation dryers, the dehumidification power decreases in cooler environments. Examples of the approximate dehumidification capacity under various (constant) ambient conditions:
- 30 °C: 80% humidity: 65 liters / 24 hours - 60% humidity: 42 liters / 24 hours.
- 20 °C: 80% humidity: 32 liters / 24 hours - 60% humidity: 24 liters / 24 hours.
- 15 °C: 80% humidity: 23 liters / 24 hours - 60% humidity: 17 liters / 24 hours.
- 10 °C: 80% humidity: 13 liters / 24 hours - 60% humidity: 12 liters / 24 hours.
Technical data
| Voltage |
220-240V / 50Hz |
| Power consumption |
max. 850 (3.7 A) or 710W (3.1 A) at 20°C/60% r.F. |
| Sound pressure level |
55 dB(A) (manufacturer's specification) |
| Dehumidification capacity |
max. 65 liters/day (30°C / 80% r.F.) |
| Air volume |
350 m³/h, 1 ventilation stage |
| Condensate tank |
No tank, integrated pump with 7.5 m hose |
| Compressor |
Rotary compressor |
| Refrigerant |
R290C (250gr.) |
| Dimensions (H x W x L) |
470 x 325 x 600 mm |
| Weight: |
39 Kg |
| Operating setting: |
Digital control panel |
| Ambient temperature: |
5°C ~ 35°C |
| Area of application: |
up to 150 m² |
| Swiss plug: |
EU plug with fixed adapter for Switzerland |
| Hose connection: |
Yes |
| Warranty: |
2 years |
