Here you will find a large selection of adsorption dryers for commercial and residential buildings.
Dehumidifiers with adsorption technology are suitable for keeping individual rooms or entire buildings dry, especially in cold temperatures. They can also be integrated into ventilation circuits to dry the air before it is released into the rooms.
Products
Krüger Krüger Secomat 200 Room Air Clothes Dryer
One of the strong Krüger Secomat models. It is suitable for single-family homes with a lower drying requirement for rooms that are unheated. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device: drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating Option: This model is also available with a 1350W heater for an additional charge. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage.Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis. Technical data Krüger article: 389.01 drying room: up to 25 m² Drying performance: 3.08 Kg/h Consumption per kg of laundry: 0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secoamt 200H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification for 20kg laundry in the room) Examples of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W) air circulation volume: 1400 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads User Manual German
Fr. 3'670.00
Krüger Krüger Secomat 4 anthracite room air clothes dryer
The new "Secomat4" from Krüger impresses with very simple operation and thoughtful functionality. The design has been modernized and even awarded the "Reddot" award. The device is suitable for single-family homes with increased drying frequency or multi-family homes with low drying needs. It achieves a drying performance of about 3 washing machine loads per day. Available in anthracite, and additionally in azure blue with us. service The basic idea of the new generation is that the dryer only needs to be turned on once. Subsequently, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:• Only dry laundry: The drying process continues until the laundry is dry. If there is no laundry or if it is dry, the device pauses.• Drying laundry and room monitoring: If laundry is hung, it will be dried. If the laundry is dry or no laundry is hung, the Secomat switches to general room monitoring. The humidity in the room is kept just below the threshold of 60% relative humidity to prevent odors and mold formation.• Only room monitoring: the device can also be used solely as a room dehumidifier, without drying laundry. The humidity in the room is kept just below the threshold of 60% relative humidity to prevent odors and mold formation. Wi-Fi and app "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their mobile phone. For this, the device must be within the range of a WLAN in the house." Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with humidity sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can differentiate whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process. airway and filter The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove. water drainage The drained water is discharged through a hose connection. The connection is located in the bottom of the device near the wall, so that the water runs almost vertically through a hose into a siphon mounted below. With an angle coupling, the water can also be diverted sideways. Assembly The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery. Features at a glance• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: anthracite (RAL 7016) Technical data Krüger article: 397.01 drying room: min. 6 m² up to max. 16 m² Drying performance: 2.81 Kg/h Consumption per kg of laundry: 0.28 kWh Energy efficiency: TO Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 70 dB(A) (Manufacturer's specification for 10kg laundry in the room) Examples of dehumidification performance and consumption: n/a air circulation volume: n/a condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads User Manual DE - FR - IT EN
Fr. 2'429.00
Krüger Krüger Secomat 4 azure blue room air clothes dryer
The new Secomat4 from Krüger impresses with its intuitive operation and well-thought-out functionality. Its modern design, which has been awarded the prestigious "Reddot" award, makes it a real eye-catcher. Designed for single-family homes with higher drying needs or multi-family homes with lower needs, it offers a drying capacity of about three washing machine loads per day. Available in elegant anthracite and exclusively with us also in stylish azure blue.Operation The operation of the Secomat4 is incredibly simple: Once switched on, the advanced software in combination with various sensors takes over the fully automatic operation. At the push of a button, you can choose between three operating modes: Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate. Wi-Fi and app "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house." Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with humidity sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process. Airway and filter The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove. Water drainage The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways. Montage The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery. Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: blue (RAL 5009) Technical data Kruger article: 397.03 Drying room: min. 6 m² up to max. 16 m² Drying performance: 2.81 Kg/h Consumption per kg of laundry: 0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 70 dB(A) (Manufacturer's specification for 10kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads User Manual DE - FR - IT EN
Fr. 2'429.00
Ekström LED light strip on cable reel 25m IP55 Ekström
With this practical light hose reel, construction sites, stairwells, and generally poorly lit areas can be illuminated easily and quickly. It is quickly installed and very easy to handle. Ideal for example • for lighting of construction sites and industrial halls• Guidance in dark indoor and outdoor areas (IP 55)• Lighting of market stalls, Christmas markets • Party lighting Hints • The hose can be shortened at 1 m intervals with scissors if necessary, according to the procedure described in the user manual.• Only operate in the unrolled state• Continuous operation longer than 12 hours shortens the lifespan of the LEDs. Technical data brand Ekstrom Material Metal frame / Plastic casing Cable length 25 m Recording 275 W (11 W / m) Lumen 1000 lm / m Light color 6000 K connector T12 Protection class IP55 Operating voltage 230 V 50 Hz Mass (Height x Width x Depth) 340 x 250 x 205 mm Net weight 5.7 kg guarantee 2 years
Fr. 165.00
Lübra Lübra Secotec 1400 Room Air Clothes Dryer
The new Secotec 1400 dryer from Lübra impresses with its sleek design, economical operation, and solid craftsmanship made in Switzerland.Similar to the more affordable Dryfix Swiss, the Secotec 1400 features a more powerful blower, which is particularly advantageous for even drying on long drying lines over 4m in length. The drying capacity is 1.70 kg per hour, which corresponds to approximately 3-4 loads of laundry per day in slightly temperate rooms. Therefore, the Secotec 1400 is ideal for use in single-family homes or as a supplement to a tumbler in multi-family houses.The humid room air is drawn in from the right side, while the dry air is blown into the room from the front in the upper area of the housing. For drying laundry, the Secotec1400 is ideally hung if the top edge is mounted no higher than 1.70m and can blow along the lines.The housing is made of high-quality, powder-coated metal (white RAL 9003). On the right side, a dust filter is inserted, which cleans the drawn-in room air of dirt. This filter consists of a plastic frame and a high-density nylon mesh. It can be easily removed from the front for cleaning. Immediately behind the filter is the water drainage channel for the condensate, which is thus accessible for cleaning without tools.Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted. • Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed.Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 1m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (suitable hose: 16mm inner diameter). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort. Technical data drying room: up to 18m2 Drying performance: 1.7 Kg/h Consumption per kg of laundry: 0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: 460W Sound pressure level (our measurement): 1.0 m distance 66 dB(A) 2.5 m distance 63 dB(A) Dehumidification capacity: 35 liters/day (30°C / 80% r.H.) air circulation volume: 850m³/h condensate tank: No integrated tank With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor Coolant: R410C Dimensions (H/W/D): 550 x 570 x 260 mm (Depth: from wall to front) Weight: 35 Kg Business closure: Hygrostatrad Ambient temperature: 5°C ~ 30°C Swiss plug: Yes, connection cable 3m hose connection: Yes Guarantee: 3 years
Fr. 1'820.00
Lübra Lübra Secotec 1410 Room Air Clothes Dryer
The Lübra SecoTec 1410 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1350m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Modern design, including END-OFF mode. High water extraction even in the cooler season.Execution:- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort. Technical data Country of production Switzerland energy efficiency class A1 Power consumption 800 Watt supply voltage 230 V Dry performance at 15kg 2.52 kg/h consumption 0.32 kWh / kg laundry noise level (our measurement) 63 dB(A) at a distance of 2.5m 66 dB(A) at 1m distance air circulation 1350m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 42 kg Refrigerant (CFC-free) R410a guarantee 3 years
Fr. 2'618.00
Lübra Lübra Secotec 1700 Room Air Clothes Dryer
The Lübra SecoTec 1700 dryer - from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 2-4 parties. Thanks to the new double radial fan, it distributes the 1450m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed. Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. execution- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value). mounting on the wallThe installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung up. All necessary mounting materials such as screws / dowels and a 2m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during drying. Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort. Technical data Country of production Switzerland energy efficiency class A1 Power consumption 870 Watt supply voltage 230 V Dry performance at 15kg 2.93 kg/h consumption 0.30 kWh / kg laundry noise level (our measurement) 65 dB(A) at a distance of 2.5m 68 dB(A) at 1m distance air circulation 1450m³/h Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 740 x 440 x 410 mm Weight 44 kg Refrigerant (CFC-free) R410a guarantee 3 years
Fr. 2'989.00
Lübra Lübra Secotec 3100 Room Air Clothes Dryer
The Lübra SecoTec 3100 dryer from the Topten list is a high-quality room air dryer and is suitable for drying rooms shared by 3-6 parties. Thanks to the new double radial fan, it distributes the 1450m³/h dry air with good pressure even in larger rooms and is acoustically noticeably quieter than dryers with comparable dehumidification performance.Modern design, including END-OFF mode. High water extraction even in the cooler season.Execution:- Plug-in dryer, robust steel sheet housing, white powder-coated- Wall mounting rail with anti-sound rubber buffers, required screws/anchors- Hygrostat- Mehrwegfilter- Laundry drying program with end-off function (when the laundry is dry, the device completely shuts off) and room dehumidification program (the device operates whenever the room humidity is higher than the set target humidity value).Easy operation with the Lübra control• Function switch: here you can choose whether the device should only dry the laundry and then automatically turn off, or whether it should maintain the room at a constant target humidity. In this mode, the dryer runs whenever the room humidity is higher than the set desired humidity; otherwise, dehumidification and the fan pause.• Hygrostat-Rad: Rotary switch, with which the desired target humidity can be easily adjusted.• Start button: If no changes are to be made to the settings, operation can be started (or stopped) simply by pressing the start button. This is an easily understandable solution, especially in drying rooms for multiple parties. A Plexiglas cover is also available upon request, which prevents access to the function dial and hygrometer, so that the settings cannot be changed.Ambient temperatureTechnically, the Secotec dryers can be used down to 5°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.mounting on the wall The installation is as simple as with all tumble dryers: a mounting rail is anchored to the wall with 2 screws, and the device can then be hung on it. All necessary mounting materials such as screws / dowels and a 1m hose are included in the delivery. Both the support rail and the two buffers supporting the device against the wall at the bottom are rubber insulated to minimize the transmission of vibrations to the wall. Due to the high dehumidification performance, we recommend draining the condensate directly into the drain with the hose if possible (1m hose is included in the delivery). If you wish to use a bucket, please ensure that it has sufficient capacity (min. 8 liters) to avoid overflow during the drying process. Upon request, we will professionally install the dryer at your home within a radius of up to 120 km (Fr. 210.-), for further distances, price upon request. Calculate distanceImportant:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort. Technical data Country of production Switzerland energy efficiency class A1 Power consumption 1180 Watt supply voltage 230 V Dry performance at 15kg 4.05 kg/h max. water extraction (30°C/80%) 73.2 Liter/24 h Noise level inside 2.5m 69 dbA air circulation 1450 Room temperature operation from 5 - 30 °C Dimensions (HxWxD) / Weight 74 x 44 x 41 cm Weight 49 kg guarantee 3 years
Fr. 3'490.00
Lübra Lübra Secotec 525 Room Air Clothes Dryer
The Secotec 525 dryer from Lübra is a sophisticated blend of a freestanding and wall-mounted device. It can be placed in the room on wheels, but it can also be mounted on the wall with two screws.The Secotec 525 features a powerful blower that dries laundry remarkably quickly. We recommend the Secotec 525 when you want to dry laundry, but also occasionally use the dehumidifier in other rooms.Characteristics• very good workmanship• larger condensate water bucket 8 L with overflow protection• Hose connection• Air intake with coarse dust filter• Wall mounting possible• 4 The Role• Cable with Swiss plugAmbient temperatureTechnically, the "525" tumble dryers can be used down to 8°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C. 30°C 60% -> 13.6 L/489W, 80% -> 17.4 L/510W25°C 60% -> 10.7 L/441W, 80% -> 15.6 L/470W20°C 60% -> 8.2 L/409W, 80% -> 12.7 L/416W15°C 60% -> 6.7 L/379W, 80% -> 9.1 L/388W10°C 60% -> 4.1 L/360W, 80% -> 6.8 L/361W5°C 60% -> 2.9 L/343W, 80% -> 4.5 L/342W(% r.F.=relative humidity)Technical data drying room up to 30m² drying performance 1.02 Kg/h Consumption per kg of laundry 0.41 kW/h energy efficiency A1 Tension 230V / 50Hz Power consumption max. 420W (at 20°C/60% r.H.) Sound pressure level 2.5 m distance 60 dB(A) dehumidification performance 18 liters/day (30°C / 80% r.H.) condensate tank 8 Liter Compressor Rotary compressor Dimensions (H x W x D) 10.1 x 42 x 40 cm Weight 39 Kg cessation of operations Hygrostatrad Ambient temperature 5°C ~ 30°C Swiss plug Yes hose connection Yes guarantee 3 years special Assembly in Switzerland
Fr. 1'790.00
Master Master DH7160 Dehumidifier
This exceptionally powerful, mobile dehumidifier, which operates on three-phase power, is characterized by its remarkable versatility. It is the ideal solution for reliably keeping storage rooms dry, where moisture-sensitive products such as medications, hardware, paper and leather goods, or electronic devices are stored. Furthermore, it excels in drying water damage and in industrial applications, for example, in drying herbs or laundry. Thanks to its strong airflow, it is capable of distributing dry air widely throughout the room, ensuring uniform dehumidification.The operation of the device is incredibly simple via the digital control panel on the front. Here, the desired target humidity can be precisely set in 1% increments. The clear display shows both the currently measured room humidity and the set target humidity. A particularly practical feature is the "Memory" button, which allows the set values to be saved. This ensures that the dehumidifier automatically resumes operation with the previously saved settings after a power outage, enabling uninterrupted and efficient operation. The humid air is drawn in from the front and cleaned through a reusable air filter. The dry air is blown upwards into the room with a high-quality radial fan and a lot of pressure. The ventilation is single-stage.The water is standardly directed through a hose to a lower floor drain (no tank present in the device). The suitable condensate water hose has an inner diameter of 16mm and can be directly attached to the water connection without a coupling (for additional fixation, a clamp can be used if necessary). Characteristics• Housing: Coated steel sheet• Setup: Four abrasion-resistant rubber feet (2 of them with brakes) for floor mounting• Airflow: Air intake front / Air outlet top• Carrying handle: Two stable, foldable handles on the side for pulling the device. • Air filter: Protects the device from dust, washable• Fan: 1-stage, high-quality radial fan• Condensate drain: direct hose connection, suitable hose with 16mm inner diameter.• Memory Function: After a power interruption, the device resumes operation with unchanged settings. Therefore, it is also suitable for operation with, for example, a timer.• Defrosting: Automatic demand-controlled self-defrosting• Compressor: Rotary compressor with phase protection• Suitable for unattended continuous operation The DH7160 is suitable• as a large area dehumidifier• for dehumidifying storage rooms, archives, commercial spaces, industrial halls up to 500m²/1300m³ and for drying water damage• for unattended continuous operation• for operation on a timer dehumidification performanceThe dryer can be used over a temperature range of +5°C to +32°C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) ambient conditions:30°C / 80% r.H. = 166.0 liters / 24h20°C / 60% r.H. = 57.6 Liters / 24h(r.H.=relative humidity) Scope of delivery• Plug-and-play device (only the wheels need to be screwed on)• short piece of hose (deposited behind filter upon delivery)Technical data Tension High current 3 phase (3N 380-400 V / 50 Hz) Power consumption max. 2820 (3.9A) Sound pressure level 1 m distance: 73 dB(A)2.5 m distance: 70 dB(A) dehumidification performance max. 166 liters/day (30°C / 80% r.H.) Recirculation air volume 1-stage 1700 m³/h water bucket direct hose connection, no bucket Compressor Rotary compressor refrigerant R407C / 1.39 kg Dimensions (H x W x D) 1624 x 582 x 410 mm Weight 124 Kg Operational cessation Digital Operator Panel Ambient temperatureAmbient humidity 5°C ~ 32°C30 - 90% r.F. Area of application up to 500 m² (or 1300 m³) Swiss plug High current plug CEE16 hose connection Yes operating hour meter No Consumption meter kWh No Guarantee 2 years Even more powerful dehumidifiers"If you are looking for even more powerful dehumidifiers, also check out our section "Adsorption dryers"
Fr. 3'290.00
TROTEC Trotec dehumidifier DH 25 S
The DH25 is a powerful dehumidifier that is ideal for medium-sized rooms and environments with high humidity levels. It impresses with its reliable dehumidification performance in both cool and temperate spaces. As an evolution of the FDK44 model, it offers digital control and a slightly increased dehumidification capacity.OperationOperation is incredibly simple: The desired target humidity is set on the control panel. If the measured humidity exceeds the set value, the dehumidifier automatically starts operating; otherwise, it pauses. The display always shows the current room humidity. The DH25 unleashes its full dehumidification power especially for year-round drying of single or double garages, archives, basements, or for stabilizing humidity in laundry and drying rooms. Thanks to its highly advanced hot gas defrosting, the DH25 can be used down to just above freezing point. Its efficient dehumidification performance in low humidity ranges, where other dehumidifiers can no longer extract moisture from the air, is particularly noteworthy. The room air is drawn in from one side of the housing and cleaned through an industrial, reusable filter. The dried air is blown into the room from the opposite side, creating effective air circulation. The setup of the DH25 is flexible: it can be placed both on the floor and on a free shelf, with the wheels being lockable for a secure stand. The condensate is drained directly via a hose connection. It is important that the hose has a constant slope towards the drain to ensure smooth drainage. The DH25 is characterized by its solid and high-quality construction. The housing is made of white powder-coated metal, while the internal components meet professional standards. This allows for uninterrupted continuous operation without supervision. Even after a power failure, the dehumidifier resumes operation with the previous settings, making it ideal for use with timers or smart home systems. For easy mobility, the DH25 is equipped with four sturdy wheels (with brakes) and two foldable carrying handles. Versatile application• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for continuous dehumidification of tempered but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer dehumidification performanceThe dryer can be used thanks to advanced hot gas defrosting over a wide temperature range from +1°C to +35°C, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 40 liters20°C/80% r.H.: 16 Liters20°C/60% r.H.: 12 Liters10°C/60% r.H.: 7 Liters(r.H.=relative humidity) Optional accessoriesThe delivery includes the ready-to-plug-in device. If needed, we offer various suitable accessories, such as:• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped away to a higher location)Stronger designThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25 Technical data Model: Trotec DH25S Tension: 230V / 50Hz Power consumption: max. 700W / 510W (at 20°C/60% r.H.) Sound pressure level: (our measurement) 1 m distance 53 dB(A)2.5 m distance 51 dB(A) Dehumidification capacity: 40 liters/day (30°C / 80% r.H.) Air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) Condensation tank: No tank / only hose connection possible Compressor: Rotary compressor Refrigerant: R290 (152gr.) Dimensions (L/H/D): 580 x 455 x 350 mm (including wheels and carrying handles) Weight: 30 Kg Business closure: Digital Ambient temperature: 1°C ~ 35°C Area of application: up to 100m² Swiss plug: EU plug with Swiss fixed adapter, 5m cable Hose connection: Yes Guarantee: 2 years
Fr. 1'290.00
TROTEC Trotec TTK100E Dehumidifier
Reliable dehumidifier with solid drying performance This device has been manufactured for many years and has been continuously developed. The current version features an appealing design and has been brought up to the latest technical standards. Comfortable operation The operation is carried out via a clear operator panel with a display at the top, through which the desired target humidity can be entered in 5% increments. Continuous operation is also possible. The integrated hygrostat then automatically implements this target setting and self-regulates the performance of the compressor and the two-stage blower. The display shows you, among other things, the current value of the relative humidity in the room, the current room temperature, and the entered target value. Furthermore, the dryer has a timer function, an automatic fault diagnosis system, and a memory function. This memory function ensures that the set humidity value and the operating mode remain stored even after switching off or in the event of a power failure. This makes this model suitable for operation with a timer, for example, if you only want to run it during off-peak hours. The water that is extracted from the air is collected in the bucket placed at the front. A float automatically interrupts the operation when the bucket is full. Alternatively, the water can also be drained directly through a connectable hose into a lower-lying drain. The hose must be laid with a downward slope, as no pump is included in the device. Also suitable for laundry drying The combination of good dehumidifying power and appealing airflow makes this dehumidifier also a clothes dryer, capable of drying 2-3 loads of laundry per day in a temperate environment. Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, all while consuming significantly less electricity. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concern. Permanent air circulation In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air. Environmentally friendly refrigerant "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs. Advantages at a Glance • Hygrostat-controlled dehumidification automation with target value selection between 30 and 80 % r.H. in 5 % stepsAs soon as the desired humidity level is reached, the compressor pauses until the humidity in the room increases again (the fan continues to run to determine the true room humidity).• Continuous operation possible• Display of the desired humidity, the current humidity, and the current room temperature• Memory function• Automatic fault diagnosis system• Laundry drying function• Easily accessible air filter, easy to clean. Filters pet hair, lint, fluff, dust, and prevents bacterial growth.• Timer Function• Direct hose connection• 2 fan speeds• Level warning light when water tank is full• Overflow protection with automatic shut-off• Hot gas defrosting: faster automatic self-defrosting in cooler environments. Technical data dehumidification performance at 30 °C / 80 % r.H. 25 liters / day air volume 215 m³/ h Maximum room size 60 m² (150 m³) Minimum room size 4 m² (15 m³) temperature range 5 - 32°C Selectable target moisture Achievable target moisture 30 - 80 % r.F. 35 - 80 % (lamella evaporator) Voltage 220 - 240 V/50 Hz rated current consumption max. 2.4 A Power consumption max. 570W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss adapter refrigerant R290 (122g) GWP3 water bucket 4.3 Liter operating noise 50 dB(A) at 1 m distance 47 dB(A) at a distance of 2.5 m Dimensions L x W x H 274 x 390 x 612 mm Weight 15.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, suitable hose 12mm inner diameter Similar models Krüger Airsec 3000 guarantee 2 years Documents / Downloads User Manual German User manual French User manual Italian User manual English
Fr. 288.00