Condensate hose, transparent 6 mm inner diameter, 1.5 mm wall thickness = 9 mm outer diameterArea of applicationPVC pressure hose for conveying liquids, ideal for draining condensate from dehumidifiers and air conditioning units."Not permitted for milk, hot and alcoholic beverages with an alcohol content of more than 13 vol.% as well as beer in draft systems."   CharacteristicsTransparent, smooth inside and outside, flexible, cadmium-free, good chemical resistance. Price is per meter, ordering any lengths is easily possible by email or phone, special price for a full roll (50m).   Technical data Wall: Soft PVCTemperature range: approx. -20°C to approx. +65°C   When ordering, please select the desired number of meters.  

Learn more More Fewer

Condensate hose, transparent 8 mm inner diameter, 1.5 mm wall thickness = 11 mm outer diameterArea of applicationPVC pressure hose for conveying liquids, ideal for draining condensate from dehumidifiers and air conditioning units."Not permitted for milk, hot and alcoholic beverages with an alcohol content of more than 13 vol.% as well as beer in draft systems."   CharacteristicsTransparent, smooth inside and outside, flexible, cadmium-free, good chemical resistance. Price is per meter, ordering any lengths is easily possible by email or phone, special price for a full roll (50m).   Technical data Wall: Soft PVCTemperature range: approx. -20°C to approx. +65°C   When ordering, please select the desired number of meters.

Learn more More Fewer

Oasis dehumidifiers have been a common sight on construction sites for years. They are also well suited for keeping damp garages, archives, and basements dry. This new version under the "Krüger" brand replaces the previous "Airsec165" and is now called "Airsec11". The switch to the new, environmentally friendly refrigerant R290 also brings an improvement in the efficiency of the device. Additionally, the weight has been reduced by a good 2 kg, which provides relief, especially in professional use. Due to the stable, wide-mesh cooling part made of aluminum tubes, the Airsec/Oasis construction dryers are less susceptible to construction and gypsum dust and can be cleaned very easily.Characteristics• robust steel sheet housing• Front made of plastic• 4 four wheels, 2 side troughs/carry handles• removable coarse dust filter• mechanical hygrostat (therefore also suitable for operation with a timer)• Water container (8 liters) with float (interrupts operation when bucket is full)• Hose connection (3/4" thread at the bottom of the tub)• Light when bucket full• Heissgas-Abtauung• Cable with 3-pin Swiss plugRecommended Application ExamplesIn cooler basements, garages, civil protection facilities, winter construction sites, storage rooms   dehumidification performanceThe dryer can be used over a wide temperature range from +3°C to +40°C thanks to hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C / 80% r.H. 28 Liters / 24h28°C / 60% r.H. 16.8 Liters / 24h20°C / 60% r.H. 10.54 Liters / 24h15°C / 60% r.H. 7.19 Liters / 24h(r.H.=relative humidity)Tip The device is often placed on a wall console. In this case, the wheels should be removed and the device should be positioned sideways against the wall to ensure that the air intake (at the back of the device) is not blocked, allowing for optimal circulation. You can also obtain the pre-made consoles from the company Krüger from us.Tip No. 2: suitable coupling for hose connection"Order the original coupling for Oasis devices if you want to drain the water directly through a hose. Most commercially available couplings do not fit optimally due to the slightly altered connection thread of the collection tray."  Technical data   Krüger Art.-No. 343.01 Tension 230 V / 50 Hz Power consumption 360W normal operation (or 520W during defrosting process) Sound pressure level 1 m distance approx. 55dB (A) (our measurement) (Manufacturer's specification: 51 dB(A)) dehumidification performance 28 liters/day (30°C / 80% r.H.)  amount of recirculated air 510 m³/h free blowing condensate tank approx. 8 liters (manufacturer's specification 9 L) Compressor Rotary compressor  refrigerant R290 Dimensions (H x W x D)     560 x 38 x 36 cm Weight 23.5 Kg cessation of operations Hygrostatrad Ambient temperature 3°C ~ 40°C Area of application up to 80m² Swiss plug Yes   hose connection Yes Guarantee: 2 years

Learn more More Fewer

This modern dehumidifier combines the latest technology with an appealing design and is the ideal solution for home and basement. It offers improved performance compared to the predecessor model Airsec3000 and ensures an optimal indoor climate. The operation is incredibly simple: With the push of a button, you can choose from four operating modes: Air purification: Recirculation only for the removal of dust particles.Manual Dehumidification: Setting the desired target humidity.Automatic Dehumidification: Intelligent moisture regulation that automatically adjusts to the room temperature.Continuous operation: Ideal for drying laundry or for quickly removing moisture after water damage.Intelligent Moisture Regulation In automatic mode, the dehumidifier continuously monitors the room humidity. When the optimal humidity level is reached, the device automatically pauses. If the humidity rises again, the dehumidifier resumes operation on its own.   Timer "With the timer, the remaining runtime can be limited hourly up to a maximum of 24 hours. When the time has expired, the operation stops regardless of the measured room humidity at that time. The remaining time can be queried at the push of a button."     fan speedIn "Normal Operation" and "Air Purification" modes, the fan speed can be set to "low" or "high". The high setting increases circulation in the room, which is particularly beneficial in larger rooms, in spaces with a lot of dust in the air, and when assisting with laundry drying. The low setting reduces the amount of recirculated air, but also the operating noise. This setting is therefore ideal in smaller and noise-sensitive areas. With 48 dB(A), this dehumidifier is among the quieter, although not the quietest devices in this category on the market. If you are interested in a quieter model, also check out our offer "Dryfix Royal 24".    Large bucket   With a capacity of 6.5 liters, the condensate bucket has a comfortable size. This is particularly advantageous for humidity regulation in the basement, where the device operates unattended and the bucket needs to be emptied less frequently than with devices that have a smaller tank. Furthermore, the dehumidifier features a direct hose connection for draining the extracted water into a potentially existing floor drain.     Air filter   A air filter is installed at the air intake on the back. It cleans dust from the room air and ensures that it does not contaminate the interior of the device. The filter is washable and reusable.     dehumidification performanceThe dryer can be used over a temperature range of +5°C to +32°C, with the dehumidifying power decreasing in cooler environments, as is the case with all condensation dryers. Examples of dehumidification performance and consumption under various (constant) environmental conditions:30°C / 80% r.H.: 26 Liters / 24h20°C / 60% r.H.: 7.8 Liters / 24h (r.H.=relative humidity)     Environmentally friendly refrigerant   The contained refrigerant R290 has minimal environmental impact. The "Global Warming Potential (GWP)" is now only 3, which corresponds to a reduction of 99.85% compared to similar models from previous generations.     Characteristics   • Modern, compact design• Natural, environmentally friendly refrigerant R290 (propane)• Adjustable air outlet flap• 6.5 liter water tank with visible water level• Dehumidification capacity of up to 26 liters per day• Ambient temperature 5 - 32 °C• Digital display of target humidity or temperature• 24 h timer function• Washable air filter• Built-in handle, easy to carry     Technical data Tension 220V-240V / 50Hz Power consumption 330W at 20°C/60% r.H, max. 440W/1.89A Operating noise1 m distance2.5 m distance ?48dB(A) depending on fan speed?46dB(A) depending on fan speed Min./Max. room size 4 / 65 m² dehumidification performance 26 liters/day (30°C / 80% r.H.)  Condensation tank Approx. 6.5 Liters   Compressor   Rotary compressor  refrigerant R290 (Propane), 65g Dimensions (H x W x D)   570 x 340 x 240 mm Weight 14.5 Kg Air flow max. 200 m³/h Operational cessation Digital  Ambient temperature 5°C ~ 32°C  Area of application Basement, hobby room, apartment, bedroom, laundry drying Swiss plug Yes   hose connection Yes Global Warming Potential (GWP) 3 Guarantee 2 years   Documents / Downloads   Operating Instructions German  User manual French  User manual Italian

Learn more More Fewer

This model is suitable for single-family homes with larger amounts of laundry and in drying rooms that can become cooler in winter. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer functionAdditionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.   executionCompact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating: The Secomat150H is equipped with a 1350W heater. This automatically switches on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage. In this case, please refer to the standard version "Secomat150".Technically, the Secomat dryers can be used down to 10°C. Please note that the drying time for all room air dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of deliveryThe delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly"Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  drying room: up to 25 m² Drying performance: 3.17 Kg/h Consumption per kg of laundry:   0.30 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secomat 150H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification with 15kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1300 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

The new Secomat2 from Krüger impresses with its intuitive operation and its award-winning design, which has been honored with the prestigious "Reddot" award. As the most compact version of the series, the Secomat2 offers significantly higher drying performance than its predecessor, the Secomat75. It effortlessly handles the drying process of about two loads of laundry per day. The Secomat2 is available in elegant anthracite as well as exclusively from us in stylish azure blue.   Operation   The basic idea of the new generation is that the dryer only needs to be turned on once. After that, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate.   Wi-Fi and app   "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house."     Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with moisture sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased the drier the laundry becomes. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.     Airway and filter   The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.     Water drainage   The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways.     Montage   The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.     Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: anthracite (RAL 7016)     Technical data  Kruger article: 396.01 Drying room: min. 6 m² up to max. 12 m² Drying performance: 2.13 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 64 dB(A) (Manufacturer's specification with 7.5kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The new Secomat2 from Krüger impresses with its intuitive operation and its award-winning design, which has been honored with the prestigious "Reddot" award. As the most compact version of the series, the Secomat2 offers a significantly higher drying performance than its predecessor, the Secomat75. It effortlessly handles the drying process of about two loads of laundry per day. The Secomat2 is available in elegant anthracite as well as exclusively from us in stylish azure blue.   Operation   The basic idea of the new generation is that the dryer only needs to be turned on once. After that, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate.   Wi-Fi and app   "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house."     Sensors Like most dehumidifiers on the market, the new Secomat devices are also equipped with moisture sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out the residual moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.     Airway and filter   The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.     Water drainage   The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways.     Montage   The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.     Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: blue (RAL 5009)     Technical data  Kruger article: 396.03 Drying room: min. 6 m² up to max. 12 m² Drying performance: 2.13 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 64 dB(A) (Manufacturer's specification with 7.5kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

One of the strong Krüger Secomat models. It is suitable for single-family homes with a lower drying requirement for rooms that are unheated. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device: drying programsdrying clothesThe operation is performed at the push of a button. You can choose between low, medium, or high drying levels. The tumble dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to restart the device, you must manually restart it.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating Option: This model is also available with a 1350W heater for an additional charge. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage.Technically, the devices can be used down to 10°C. Please note that the drying time for all room air dryers is significantly extended the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort.If wall mounting is not possible, we recommend the appropriate chassis.    Technical data  Krüger article: 389.01 drying room: up to 25 m² Drying performance: 3.08 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 989W or 950W (at 20°C/60% r.H.) Version with heating Secoamt 200H: Heating switched on = +1350W Sound pressure level: 69 dB(A) (Manufacturer's specification for 20kg laundry in the room) Examples of dehumidification performance and consumption: at 20°C / 60% r.H. = 28.0 liters / 24h (power consumption: 950 W)   air circulation volume: 1400 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R407c / 550g Dimensions (H/W/D): 690 x 655 x 395 mm Weight: 47 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

The new "Secomat4" from Krüger impresses with very simple operation and thoughtful functionality. The design has been modernized and even awarded the "Reddot" award. The device is suitable for single-family homes with increased drying frequency or multi-family homes with low drying needs. It achieves a drying performance of about 3 washing machine loads per day. Available in anthracite, and additionally in azure blue with us.  service The basic idea of the new generation is that the dryer only needs to be turned on once. Subsequently, the highly developed software and various sensors take over the operation fully automatically. These functions can be selected at the push of a button:• Only dry laundry: The drying process continues until the laundry is dry. If there is no laundry or if it is dry, the device pauses.• Drying laundry and room monitoring: If laundry is hung, it will be dried. If the laundry is dry or no laundry is hung, the Secomat switches to general room monitoring. The humidity in the room is kept just below the threshold of 60% relative humidity to prevent odors and mold formation.• Only room monitoring: the device can also be used solely as a room dehumidifier, without drying laundry. The humidity in the room is kept just below the threshold of 60% relative humidity to prevent odors and mold formation.  Wi-Fi and app "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their mobile phone. For this, the device must be within the range of a WLAN in the house."  Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with humidity sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can differentiate whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.  airway and filter The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.  water drainage The drained water is discharged through a hose connection. The connection is located in the bottom of the device near the wall, so that the water runs almost vertically through a hose into a siphon mounted below. With an angle coupling, the water can also be diverted sideways.  Assembly The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.   Features at a glance• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: anthracite (RAL 7016)   Technical data  Krüger article: 397.01 drying room: min. 6 m² up to max. 16 m² Drying performance: 2.81 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: TO Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 70 dB(A) (Manufacturer's specification for 10kg laundry in the room) Examples of dehumidification performance and consumption: n/a air circulation volume: n/a condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes hose connection: Yes Guarantee: 3 years    Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The new Secomat4 from Krüger impresses with its intuitive operation and well-thought-out functionality. Its modern design, which has been awarded the prestigious "Reddot" award, makes it a real eye-catcher. Designed for single-family homes with higher drying needs or multi-family homes with lower needs, it offers a drying capacity of about three washing machine loads per day. Available in elegant anthracite and exclusively with us also in stylish azure blue.Operation The operation of the Secomat4 is incredibly simple: Once switched on, the advanced software in combination with various sensors takes over the fully automatic operation. At the push of a button, you can choose between three operating modes: Only drying laundry: In this mode, the Secomat4 dries the laundry until it is completely dry. If there is no laundry in the room or if it is already dry, the device automatically pauses.Drying laundry and room monitoring: Here, the Secomat4 first dries the laundry. As soon as it is dry or no laundry is hanging in the room, it automatically switches to room monitoring mode. In this mode, the room air humidity is kept consistently below 60% r.H. to prevent odors and mold formation.Only room monitoring: This mode allows the use of the Secomat4 as a pure room dehumidifier, independent of laundry drying. Here, too, the room air humidity is kept below 60% r.H. to ensure an optimal room climate.   Wi-Fi and app   "Anyone who wants to monitor or change the dryer and its operation can easily do so via the well-developed app on their phone. For this, the device must be within the range of a Wi-Fi network in the house."     Sensors Like most dehumidifiers on the market, the new Secomat models are also equipped with humidity sensors. These measure the room humidity and provide information about the drying process of the laundry. Furthermore, they control the ventilation strength: while very wet laundry releases sufficient moisture even at a low ventilation level, the ventilation is increased as the laundry dries. This is to optimally blow out any remaining moisture from the laundry and to keep the laundry as smooth as possible in the wind.Another sensor is an optical sensor. This sensor remembers the room in an empty state and thus detects when laundry is hanging. When laundry is detected, the device switches to the drying mode. It can distinguish whether the items are statically hung objects (= laundry) or moving objects such as people or animals. Their movement does not trigger the drying process.     Airway and filter   The humid room air is drawn in at the front in the lower area, dried, and then blown back into the room at high speed from the upper area. An air filter cleans the drawn-in air of dirt and fine dust. It is washable and has been significantly improved compared to previous generations. It is now integrated into a solid folding door and is easy to remove.     Water drainage   The drained water is discharged through a hose connection. The connection is located on the bottom of the device near the wall, so that the water runs practically vertically into a siphon mounted below via a hose. With an angle coupling, the water can also be diverted sideways.     Montage   The wall mounting is relatively easy and quick with little craftsmanship. A support rail is fixed to the wall with three screws, and the dryer can then be hung in this support rail. By the way, the support rail of the penultimate generation is compatible, so no new holes need to be drilled. All necessary mounting materials such as rail, screws, dowels, and hose coupling are included in the delivery.     Overview of Features• Environmentally friendly, natural refrigerant R1270• Energy efficient through laundry detection• Intuitive operation• App connectivity• Housing made of powder-coated steel sheet• Adjustable air outlet louvers• Practical procedure set• Easily removable lint filter• Mounting rail for wall installation• 3.5 m power cable• Color: blue (RAL 5009)     Technical data  Kruger article: 397.03 Drying room: min. 6 m² up to max. 16 m² Drying performance: 2.81 Kg/h Consumption per kg of laundry:   0.28 kWh Energy efficiency: A Tension: 230V / 50Hz Power consumption: 618W (at 20°C/60% r.H.) Sound pressure level: 70 dB(A) (Manufacturer's specification for 10kg laundry in the room) Examples ofdehumidification performanceand consumption: n/a Air circulation volume: n/a Condensation tank: No integrated tank. With hose connection, the waterdirectly drained into the drain or into a bucket. Compressor: Rotary compressor Refrigerant: R1270 / xxxg (GWP: 2) Dimensions (H/W/D): 630 x 512 x 327 mm Weight: 45 Kg Business closure: Program key Ambient temperature: 10 °C ~ 30 °C (our recommendation) 5 °C ~ 30 °C (manufacturer's specification) Swiss plug: Yes Hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual DE - FR - IT EN

Learn more More Fewer

The dryer is suitable for single-family homes and drying rooms with low to medium drying needs. It has various functions that combine the previous separation into AH- (continuous operation) and E models (end-off) into one device:drying programs drying clothesThe operation is performed at the push of a button. You have the choice between low, medium, or high drying levels. The dryer operates fully automatically and, similar to earlier models, has a so-called end-off control, which means it dehumidifies until the laundry is dry and then automatically switches off. If you want to operate the device again, you must restart it manually.basement dehumidificationAdditionally, the dryer is equipped with a button for room drying mode. The device operates whenever the humidity is too high and there is a risk of mold / odor formation in the basement. If the humidity is correct, the operation pauses.  timer function Additionally, there is the option to operate the device manually for 30, 60, or 90 minutes. After the time has elapsed, the device will turn off, and manual operation will be automatically disabled.  execution Compact device with powerful ventilation. Louvers for air discharge, which can be adjusted horizontally if needed. The clear control panel consists of 4 buttons on the front. The carrier rail and the two distance buffers in the lower part of the device are rubber insulated to reduce sound transmission to the wall. The mouse gray color of the housing is individually appealing.Heating Option: This model is also available with a 1350W heater for an additional charge. It automatically turns on at 14°C (or colder) and heats until the room temperature reaches 16°C. Therefore, this heater is only useful in very cold drying rooms. If the room is 16°C or warmer year-round, the version with heating offers no advantage.Technically, the Seccomat tumble dryers can be used down to 10°C. Please note that the drying time for all room air tumble dryers increases significantly the colder the room is. For optimal drying speed, temperatures of 15°C and above are ideal. The declared drying performance was measured at a room temperature of 20°C.  scope of delivery The delivery includes the device with a mounting rail, all necessary installation materials, as well as a drainage set. The drainage set consists of a water tank, drainage hose, and suitable hose connection couplings.  Assembly "Upon request, we will professionally install the dryer at your home for Fr. 210.-."Important:- Sanitary (drainage) or electrical (230V socket) installations are not carried out by us and must be commissioned separately by an appropriate tradesman, unless already in place.- If your wall has internal insulation, we need to know this when placing the order, as the installation will be more complex. The stated installation prices refer to direct wall mounting, meaning directly on brick or concrete walls without insulation. Additional costs for installation on insulated walls will be charged based on effort."If wall mounting is not possible, we recommend the appropriate Secomat chassis."   Technical data  Krüger article: 386.01 drying room: up to 15 m² Drying performance: 1.36 Kg/h Consumption per kg of laundry:   0.27 kWh Energy efficiency: A1 Tension: 230V / 50Hz Power consumption: max. 345W or 325W (at 20°C/60% r.H.) Version with heating "75H": Heating switched on = +1350W Sound pressure level: 64 dB(A) (Manufacturer's specification with 7.5kg laundry in the room) Example of dehumidification performance and consumption: at 20°C / 60% r.H. = 9.0 liters / 24h (power consumption: 325 W)   air circulation volume: 930 m³/h condensate tank: No integrated tank. With hose connection, the water directly drained into the drain or into a bucket. Compressor: Rotary compressor refrigerant: R134a / 550g Dimensions (H/W/D): 620 x 545 x 330 mm Weight: 39 Kg Business closure: Program key Ambient temperature: 10°C ~ 30°C Swiss plug: Yes hose connection: Yes Guarantee: 3 years Documents / Downloads   User Manual German

Learn more More Fewer

With this practical light hose reel, construction sites, stairwells, and generally poorly lit areas can be illuminated easily and quickly. It is quickly installed and very easy to handle.   Ideal for example • for lighting of construction sites and industrial halls• Guidance in dark indoor and outdoor areas (IP 55)• Lighting of market stalls, Christmas markets • Party lighting   Hints • The hose can be shortened at 1 m intervals with scissors if necessary, according to the procedure described in the user manual.• Only operate in the unrolled state• Continuous operation longer than 12 hours shortens the lifespan of the LEDs.   Technical data   brand Ekstrom Material Metal frame / Plastic casing Cable length 25 m Recording 275 W (11 W / m) Lumen 1000 lm / m Light color 6000 K connector T12 Protection class IP55 Operating voltage 230 V 50 Hz Mass (Height x Width x Depth)  340 x 250 x 205 mm Net weight 5.7 kg guarantee 2 years

Learn more More Fewer