This high-quality air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AV, the SP-AP hoses are more flexible due to additional spiral spacing. The AP hoses are therefore ideally suited for installation on the discharge side of fans."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• robust with highly flexible• good compressive strength• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 150 mm• Standard length 7.6 m • Bending radius 0.5 x Ø     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.430

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.460

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.470

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.475

Learn more More Fewer

This high-strength air hose is ideally suited for the conduction of gaseous media in areas where static charging should be avoided, e.g. channel ventilation and exhaust, paint drying, oil tank ventilation, shipbuilding, tank ventilation, tank degassing, shipyards. "Compared to the antistatic hoses of type SP-AP, the SP-AV hoses additionally have a higher strength due to shorter spiral distances. This allows for suction-side installation on blowers even at high suction pressure."   Advantages at a Glance   • Temperature range: -20 °C to +100 °C• made of antistatic, PVC-coated polyamide fabric• extra robust with high strength• specifically designed for suction side connection at high suction pressure• with abrasion protection and integrated steel spiral underneath• double-sided spiral-free couplings• Spiral spacing 50 mm• Standard length 7.6 m     We recommend using the SP series air transport hoses only in combination with the corresponding connection fittings.   Trotec Article No. 6.100.001.480

Learn more More Fewer

These easy-to-install stand feet made of aluminum are suitable for the smaller heating plates of the TIH-S series (300S/400S).  The aluminum feet are designed to maintain the optimal distance from the wall when positioned along a wall, ensuring air circulation and the efficiency of the panel. Which models do these feet fit? The frame of the heating plates has the same thickness for all TIH-S models. Therefore, these feet fit all sizes. However, for better stability, we recommend using the slightly larger black feet starting from TIH500S and above.     Product details   • Material: anodized aluminum• Can be used in any room• Easy installation• Maintenance-free• Usable for the heating plates TIH 300 S and TIH 400 S • Scope of delivery: 1 pair (=2 pieces)   Trotec Article No. 1.410.003.001

Learn more More Fewer

A high-quality handheld device for determining moisture in soft building materials such as wood, gypsum, or plaster.  Ideal for measurement controls in forestry operations, sawmills, and all wood processing areas. Specifically designed for moisture measurement of wood materials, the device features a menu option that allows the selection of hundreds of different wood types. Additionally, numerous validated material curves are stored in the device software, which can be selected using the corresponding material numbers from the included wood species table. The wood species index, with over 170 pages, is arguably the most comprehensive material curve compendium on the market. The wood moisture value determined in real-time and the defined wood temperature are displayed simultaneously on the easily readable color display behind Blanview special glass during the measurement, which ensures a high-contrast measurement display even in sunlight. The moisture measuring device can be connected to the PC via a USB cable. With the optionally available MultiMeasure Studio software (available for free in the service/download area of trotec.de), the measured data can be transferred online and in real-time directly to the PC and saved for later analysis or reports. With the help of the online storage function, raster measurements can be carried out directly on the computer, such as in the case of measuring the moisture content of a basement wall to be tested.The standard delivery includes, in addition to the measuring device, two coupling nuts, ten measuring tips (length 20 mm, ø 1.5 mm), an electrode protection cap, batteries, an operating manual, and a 170-page wood species directory. Furthermore, you can significantly expand the device's range of applications with the optionally available TS adapter set and the TC 25 connection cable pair, allowing you to connect all electrodes from the MultiMeasure range.  Advantages at a Glance • Measuring device developed and manufactured in Germany according to the highest quality standards• Robust and high-quality two-component construction with protection class IP54• Easy-to-clean, continuous glass surface made of highly scratch-resistant Blanview special glass for a high-contrast display of measurement values even in sunlight.• Capacitive Touch Control Panel• High-resolution color display for simultaneous display of two measurement values• Function for temperature compensation in wood moisture measurement• Integrated material characteristics for hundreds of different types of wood• Comprehensive material curve compendium including• Extended application spectrum through connection options for various moisture electrodes with optional TS adapter set• A suitable silicone protective cover for the device is included in the delivery.• Including measurement data management software MultiMeasure Studio (Download standard version)  Technical data  Measurement range construction moisture   0 to 100 digits Resolution: 0.1 Digit Measurement range wood moisture       Wood moisture: 0 to 100 M% Resolution: 0.1 M% Tolerance (based on the measurement principle): 0 to 5 M%: ± 0.8 M%; 5 to 30 M%: ± 0.2 M%; 30 to 100 M%: ± 0.1 M% operating temperature   0 °C to + 50 °C at Storage temperature   0 °C to + 60 °C at Battery 4 x Alkaline LR6 AA 1.5 V or NiMH batteries (> 2500 mAh) Optional energy supply 5 V USB Power consumption active approx. 80 mA passive approx. approx. 70 µA Battery life, active > 30 h Masse ((L x B x H) 174 x 63 x 35 mm battery type 2 x 1.5V, AAA Masse (L x B x H) 154 x 32 x 28 mm Weight approx. 300 g Trotec article no. 3.510.207.505 guarantee 2 years

Learn more More Fewer

Cozy feel-good warmth   "As the days in the transition period to autumn/winter become colder, but the stationary heating system is still turned off for cost reasons, the ultra-flat design convector TCH 1510 E provides pleasant, odorless, and noiseless warmth for comfortably tempered rooms with its continuously adjustable heating power of 1500 watts via thermostat – whether you use it as a wall or standing device."     Stylishly shaped   A large-area and highly efficient aluminum heating element of approximately 55 cm in length, along with aerodynamically shaped air outlets on the top of the device, ensures rapid heat distribution in rooms up to 20 m² or 50 m³. Whether in a modern living environment, in office settings, in the bathroom, or even in unheated conservatories, garages, or holiday homes: wherever quick and/or additional heat is required, the design convector demonstrates its performance. It belongs to protection class IP24 (splash-proof) and is therefore also approved for damp rooms. However, please ensure that sufficient distance from water is maintained when installing in bathrooms.     Uniform convection heat   In the TCH series convectors, the air in the device is heated by electrically heated wires and consequently rises as warm air, creating a natural draft that draws in cold room air into the device. This creates a continuous circulation of warm air throughout the room, flowing into every corner. The heat spreads evenly everywhere, thus preventing overheating or underheating of individual areas. Once the preset temperature is reached, the device reduces its output and maintains the desired temperature.     Innovative window-open detection prevents energy waste   Regular ventilation is essential for a good and healthy indoor climate. To avoid unnecessary energy waste during ventilation, the device features an energy-saving window-open detection. When the window is opened, the convector reduces its heating output in thermostat-controlled automatic mode until the window is closed again. An automatic temperature control of the room temperature and an intelligent heat automation further reduce the already economical energy consumption. When the preset desired temperature (in the range of 0 to 50 °C) is reached, the heating element automatically switches off and only turns back on when additional heating is required. This keeps the energy consumption of the convector pleasantly low, and no expensive energy costs are thrown out the window.     Smart equipment for warm feel-good times   The comfort features of the design convector are rounded off by a room temperature and clock display, two operating modes (automatic and weekly mode), stable stand feet for flexible use in different locations, a wall mount, an operating hours display, and an extra-long power cable for maximum freedom of movement.     Cozy warm interiors with comfort   This heater operates with the effect of uniform convection heat and, like this, it can be used almost everywhere in private living environments or in offices: for example, as an emergency heater when the main heating fails, as a reliable transitional heater before the heating period begins, or for heating areas such as conservatories, garages, hobby rooms, or basement areas that are not connected to a central heating system.     Operating hours display – keeps consumption in view   "Whether as a tenant or landlord – it can occasionally be helpful to know how much heating costs have been incurred over a specific period. With the practical operating hours display, you can monitor and record consumption down to the hour."     Weekly mode – individual heating times and temperatures every day   Every day is different. On weekends, we usually spend more time at home, and accordingly, the heating demand is greater. A programmable weekly timer allows you to program individual heating times and room temperatures for each day of the week.   "More warmth on the weekend and less warmth during the week when you leave the house in the morning: In week mode, individual room temperatures and heating times can be assigned to each day of the week. Quite practical."     Child safety lock – for safe operation in the children's room   The child lock protects the device settings of the convector from curious children's hands. Once activated, the device settings can no longer be changed via the control panel.     Frost Guardian Function   Ideal for short-term property vacancies or spaces that are not constantly used. With the stepless thermostat control, you can also use the devices in frost protection mode. The heating device is then automatically activated via the thermostat to keep the rooms frost-free or to prevent excessive cooling. The TCH convectors are not only ideally suited for landlords or real estate companies as frost protection devices – they also provide a practical function for private individuals or businesses to keep vacant rooms or garages frost-free. In particular, rooms, conservatories, or basements that are not connected to central heating can be reliably kept warm in this way.     Advantages at a Glance   • Up to 1500 W heating power for clean, condensation-free, and odorless warmth• Large heating element of approximately 55 cm in length• Temperature range adjustable between 0-50 C°• Stepless temperature control• Innovative Window Open Detection• Automatic temperature control / Intelligent heat automation• Frost Guardian Function• Energy-efficient operation thanks to automatic shutdown upon reaching target values• Current room temperature display• Timer Function• Weekly timer• Operating hours display• LCD-Display• Parental controls• Overheat protection• Can be used as a wall or stand device• Frost Guardian Function   Please note • You can find the ErP table for this heating device in the "Documents" section. • The device is only suitable for use in well-insulated rooms or for occasional use. • The selectable temperature does not always correspond to what can be technically achieved. The larger the room and the lower the base temperature in the room, the fewer high temperature targets can be reached. For example, in a well-insulated room of 15 - 20 m², temperature targets of a comfortable 20 - 25°C should be easily achievable, whereas the maximum adjustable target of 50°C is not realistic with 1500 watts of power.    Technical data  heating capacity 1500W Heizart Convention Maximum room size 20 m² (50 m³) temperature range 0 - 50 °C Voltage 220 - 240 V/50 Hz rated current consumption max. 6.5 A Power consumption max. 1500W Recommended Coverage 10 A Cable length approx. 1.8 m Plug EU plug with Swiss adapter Dimensions W x H x D 690 x 480 x 260 mm (including stand feet) Weight 6kg Protection class IP24 on/off switch and thermostat control and LC-Display and Frost Watch Function and Automatic shutdown at target value and parental controls and Timer yes (one-time, weekly timer, weekday timer) anti-tip device and Open-Window-Detection and guarantee 2 years

Learn more More Fewer

The climate measuring device BC21, equipped with high-quality sensors and a variety of measurement functions, is the ideal solution for demanding climate measurements in households, hobbies, or workshops. It enables the precise capture of the relationship between humidity and temperature, which is crucial for creating optimal climate conditions in living, working, or storage spaces. With the integrated dew point temperature measurement, important questions regarding building climate control can be answered quickly and easily, for example, whether an optimal comfort climate exists or whether there is a risk of rust or mold. The robust construction of the BC21, with a shock- and bend-resistant stainless steel probe, proves itself even in the harsh practical use by indoor air technicians. The additional measurement function of the wet bulb temperature expands the application possibilities of the device and allows its use in the planning, commissioning, and performance control of climate or ventilation systems. The advantages of the BC21 lie in its versatility and user-friendliness. It allows for the measurement of various climate data with just one device, including relative humidity, air temperature, dew point, and wet bulb temperature. The device is characterized by an optimal price-performance ratio, a dual display for the simultaneous representation of measurement values, a minimum and maximum value as well as hold function, a fast response time, soft-touch function keys, easy one-handed operation, a backlit display, an automatic shut-off, and a robust construction. The practically optimized German industrial design, a protected design patent, rounds off the overall package. The additional features of the BC21 include the display of minimum and maximum values, temperature display in °C and °F, the hold function, display lighting, and automatic shut-off. These features contribute to making the BC21 a reliable and user-friendly climate measuring device for a variety of applications.Scope of delivery• Measuring device• Battery• Storage box• Operating instructions Technical data Air temperature measurement range -30 °C to +100 °C (-22 °F to +199 °F) Air Temperature Resolution 0,1 °C (0,1 °F) Air Temperature Accuracy ± 1 °C (± 1.5 °F) Relative Humidity Measurement Range 0 to 100 % r.H. (specified 5 to 95 % r.H.) Relative Humidity Resolution 0.1 % r.F. Relative Humidity Accuracy ± 2 % r.H. (at 25 °C and 5 to 95 % r.H.) Dew Point Temperature Measurement Range -30 °C to +100 °C (-22 °F to +199 °F) Dew Point Temperature Resolution 0.1 °C (0.1 °F) Dew Point Temperature Accuracy ± 1 °C (± 1.5 °F) Wet bulb temperature measurement range 0 °C to +80 °C (-32 °F to +176 °F) Wet Bulb Temperature Resolution 0.1 °C (0.1 °F) Wet bulb temperature accuracy ± 1 °C (± 1,5 °F) Dimensions (L x W x H) 225 x 54 x 32 mm Weight approx. 200 g (including batteries)

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for localized heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transport via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 1100W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 1.09 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 4.8 A Power consumption max. 1.1 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 905 x 22 mm (without stand feet) Weight 9 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.018 Guarantee 2 years

Learn more More Fewer

These infrared panels are ideal for equipping previously unheated rooms with an effective heating source or for generating localized warmth, such as at the workplace, by the sofa, or in the bathroom. The gentle heat waves are absorbed by solid materials like furniture or walls, as well as by people, providing a pleasant warmth. It is very comparable to the principle of the sun. In modern building drying, this type of panel is often used to drive moisture out of walls and floors. "While traditional heating devices need to heat the entire room volume, heating plates can specifically heat desired areas. This saves a lot of energy and thus also costs."  application examples   Heating of Living Spaces: Whether in the living area, conservatory, or bathroom, the infrared flat heater provides additional heating exactly where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for spot heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.  Advantages at a Glance • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell• no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (matching stand feet are available from us as accessories)• Immediately usable - no additional installations or expensive renovations required You can find the ErP table for this heating device above in the "Documents" section.      Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows: Area of the room in m² x W/m² = required heating power in Watts.  Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   heating capacity 580W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C heating surface 0.54 m² heating levels 1 Voltage 220 - 240 V/50 Hz rated current consumption max. 2.6 A Power consumption max. 0.58 kW housing Aluminum Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 905 x 605 x 22 mm (without stand feet) Weight 5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.012 guarantee 2 years

Learn more More Fewer

These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer