These infrared panels provide an ideal solution for equipping previously unheated rooms with an efficient heat source or for generating targeted heat in specific areas, whether in the workplace, living area, or bathroom. The heat waves absorbed by solid materials such as furniture, walls, and even people provide a pleasant warmth, similar to the principle of solar radiation. Unlike conventional heating devices that need to warm the entire volume of a room, infrared panels allow for targeted heating of desired areas, resulting in significant energy savings and associated cost reductions.These panels are also used in modern construction drying to effectively remove moisture from walls and floors.   Application examples   Heating of Living Spaces: Whether it's the living area, conservatory, or bathroom, the infrared flat heater provides additional heating right where it is needed by the residents. It can be space-savingly mounted on the wall and only requires a standard power outlet for operation. Catering Use: As a stand or wall device, the heating plate is the optimal solution for targeted heating of sales stands or terrace areas, and is much more effective than conventional gas heaters. Faster drying of wall surfaces: In construction drying or renovation, infrared heating of suitable wall materials causes a capillary moisture transport towards the heated wall surface due to the temperature gradient, which can transport significantly more moisture from the wall in a shorter time compared to diffusion. In plain English: drying is faster when the damp wall is irradiated with infrared waves. Workplace Heating: With the optionally available stand feet, the heater can be set up vertically or horizontally at any location for targeted heating. Ideal also for cool workplaces, for example in warehouses, behind refrigerated counters, in workshops, or in large halls.     Advantages at a Glance   • Efficient heating process with environmentally friendly IR-C radiation• Heat transfer via light waves - direct object heating without convective loss• Maximum efficiency: 100% of the electrical energy used is converted into thermal power.• Clean heat - no noise, no smell • no condensate, no oxygen consumption, no unpleasant dust swirling• Integrated suspension device for mounting on wall or mounting supports• Also usable as a freestanding device (suitable stand feet are available from us as accessories)• Ready to use immediately - no additional installations or expensive renovations required   You can find the ErP table for this heating device above in the "Documents" section.         Please note: The device is only suitable for use in well-insulated rooms or for occasional use.      Calculation of the power requirements for rooms up to 2.5 m ceiling height Sound insulation quality of the rooms good to very good medium uninsulated/old building 1 exterior wall 50 W/m² 70 W/m² 90 W/m² the additional exterior wall +10 W/m² +10 W/m² +10 W/m² The required infrared heating power is calculated as follows:Area of the room in m² x W/m² = required heating power in Watts. Calculation example: For a room size of 10 m² with very good insulation quality and two exterior walls (50 + 10 W/m²), the power requirement recommendation is 10 m² x 60W/m² = 600 W.       Technical data   Heating output 900W Heizart Infrared heat waves Suitable room temperature 0 - 60 °C Heating surface 0.91 m² Heating levels 1 voltage 220 - 240 V/50 Hz Nominal current consumption max. 3.9 A Power consumption max. 0.90 kW Housing Aluminium Cable length approx. 1.9 m Plug EU plug with Swiss adapter Dimensions W x H x D 1205 x 755 x 22 mm (without stand feet) Weight 7.5 kg Protection class IP54 Overheating protection and Trotec article no. 1.410.003.016 Guarantee 2 years

Learn more More Fewer

Semi-professional dehumidifier for basements, construction sites, and laundry drying   This comfort dehumidifier protects and preserves what is dear and valuable to you. It is suitable for both robust dehumidification tasks in basements and laundry rooms, as well as for professional use in drying water damage or for keeping construction sites dry. Thanks to hot gas defrosting, it is also recommended for optimal drying results at low temperatures.     The all-rounder: Protects against mold, corrosion, and construction damage Excess moisture in the indoor air (> 60 percent) provides an ideal environment for pathogens. Mold also spreads in living spaces starting from this value, increasing the risk of respiratory diseases. Classic cars in the garage, artworks on the walls, and archived documents and books also suffer from excessive humidity. The causes of harmful humidity are diverse: deficiencies in building sealing, insufficient ventilation, as well as storms, flooding, or leaks in water-carrying pipes. The 122E keeps it dry.     Compact design – outstanding dehumidification performance Whether as a room climate improver in private settings or as a dehumidifier in commercial use – the cuboid stainless steel dehumidifier impresses with its comfortable features (e.g. 24h timer and auto-restart function as well as control panel lock function), an 8-liter condensate tank, and a strong dehumidification performance of 38 l/24 h at an air volume of 240 m³/h – sufficient for room sizes up to 100 m² or 250 m³. Thanks to the auto-restart function (memory function), the device automatically starts again in the pre-selected settings after a brief power interruption. For maximum user comfort, the control panel is equipped with easy-care membrane buttons and a digital display of room temperature and humidity. The target humidity can be set in 5 percent increments. Standard features also include a fill level warning light for a full water tank, overflow protection with automatic shut-off, and a reusable air filter that is easy to clean.     Gentle laundry drying with dehumidifiers In addition to dehumidifying the room air, a dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumble dryer. The laundry drying function (or textile drying mode or SuperDry function) is comparable to traditional air drying outdoors. Dehumidifiers offer the advantage that laundry is dried gently, just like in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional tumble dryers, all while consuming significantly less electricity."In addition, sensitive materials such as wool, silk, or synthetic fibers can also be dried without concern. In contrast to pure air drying, the laundry becomes much softer and more pleasant to wear on the skin."    Environmentally friendly refrigerant R290 Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Additional plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby further reducing your energy costs.     A dehumidifier for all occasions • Optimal suited for a healthy indoor climate in living areas• Moisture protection in archives, libraries, and art exhibitions• Corrosion and mold protection in (classic car) garages, basements, and storage rooms• Construction site drying and drying of damp masonry after water damage     Connection for external condensate drainage "For applications where regular emptying of the 8-liter condensate container is either not possible or undesirable, such as during unattended continuous drying operations in the basement, garage, holiday home, or on boats, the dryer features a built-in hose connection for direct drainage of the condensate into a drain. A short piece of suitable hose is already included in the delivery."     Hot gas defrosting automatic for faster drying results In low temperature ranges (below 12 °C), the integrated hot gas defrosting automatic system ensures consistently reliable air dehumidification – without long defrosting phases. Unlike the time-consuming recirculation defrosting of normal condensate dryers, the defrosting occurs through hot gas injection into the evaporator. This significantly shortens the duration of defrosting and achieves the drying goal more quickly.     SuperDry function for accelerated textile drying Practically for the quick dehumidification of wet laundry, clothing, or carpets is the special SuperDry function. This allows even large textiles to dry in no time, which do not fit in the tumble dryer.    Advantages at a Glance • Quality hot gas defrost automatic system• SuperDry function for accelerated textile drying• Automatic hygrostat-controlled dehumidification operation with real value humidity preset• Activated carbon filter against unpleasant odors• 24-hour timer• Auto-restart function (memory function) • suitable for construction drying • suitable for drying damp basements• suitable for laundry drying• Permanent mode• Easy-care material mix with a distinctive look• Digital display of current humidity and temperature values• Locking function of the control panel (child safety)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 38 liters / day air volume 240 m³/ h Maximum room size 100 m² (100 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 35°C moisture range 30 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 2.9 A Power consumption max. 750W Recommended Coverage 10 A Cable length approx. 2 m Plug EU plug with Swiss adapter refrigerant R290 (96g) GWP3 water bucket 8 Liter operating noise 52 dB(A) at 1 m distance49 dB(A) at a distance of 2.5 m Dimensions L x W x H 453 x 310 x 635 mm Weight 27.5 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years   Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

"Striking in technical features, modest in price: The dehumidifier with built-in condensate pump."     Comfort function: Temperature-dependent air dehumidification   "For an optimal indoor climate, room temperature and humidity must be coordinated. This is exactly where temperature-dependent dehumidification comes into play. The device adjusts the humidity level based on temperature to the optimal value. The comfort function is particularly recommended for use in rooms with temperature fluctuations throughout the day or year. If the room temperature changes, the dehumidifier automatically adjusts its dehumidification performance."     Effective and simple   The device also naturally features a hygrostat-controlled dehumidification automation. A fixed air humidity value is selected, which should not be exceeded. The adjustable range is between 35 and 85% relative humidity, in 5% increments. If the value is exceeded, the dehumidifier automatically activates and switches off by itself in an energy-saving manner as soon as the desired target value is reached.     Gentle laundry drying with dehumidifiers   "In addition to dehumidifying the room air, the dehumidifier can be comfortably used for drying laundry – either as a support or as a complete replacement for a conventional tumbler. The laundry drying function is comparable to traditional air drying outdoors."   Dehumidifiers offer the advantage that laundry is dried gently, as in nature. Colors remain vibrant, and clothing has a longer lifespan than with conventional dryers, with significantly less energy consumption. Additionally, delicate materials such as wool, silk, or synthetic fibers can be dried without concerns. In contrast to pure air drying, the laundry becomes softer and more pleasant to wear against the skin because the garments move in the gentle breeze of the dryer during the drying process.     Propane (R290) as an environmentally friendly refrigerant in dehumidifiers   Annually, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using propane (R290) as a refrigerant, this air dehumidifier makes a valuable contribution to climate protection. The natural refrigerant propane (R290) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, environmentally friendly propane (R290) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=3).   Supplement plus for the environment: Due to its excellent thermodynamic properties, propane (R290) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Convincing Features   The timer function, a fill level warning light for a full water tank, the overflow protection with automatic shut-off, and a laundry drying mode complete the comfort features of this TTK dehumidifier. In addition, the integrated, washable air filter allows for additional air purification by extracting dust or pet hair. Thanks to its wheels and practical carrying handles, the device is also well-prepared for flexible relocation. The operation is easy and low-maintenance due to its comfortable features.     Bucket, direct hose connection and integrated condensate pump   The water that is extracted from the air is collected in a standard 6-liter bucket. A float switch automatically stops the operation when the bucket is full. Alternatively, the water can also be directed through a hose to a lower drainage point. If no floor drain is available, the water can be pumped up to 4 meters high using the built-in pump in the device, for example into a sink, out of a basement window, or even one floor up. Direct drainage is particularly convenient in unattended operation, as it eliminates the need to empty the bucket (hobby rooms, holiday apartments, drying of water damage, etc.).    The integrated pump is not suitable for continuous operation.     Permanent air circulation   In this model, the compressor (= dehumidification) stops when the desired humidity level is reached, while the fan runs continuously to circulate the room air.     Advantages at a Glance • Hygrostat-controlled dehumidification automation with selectable target value between 35 and 85 % r.H. in 5 % steps• Comfort operation for temperature-dependent automatic control of humidity• Overflow protection with automatic shutdown when the bucket is full • Level warning light when water tank is full• Connection for external condensate drainage with integrated condensate pump• Pump-out function for faster condensate drainage• Optional fully automatic or continuous operation• Easily readable, illuminated display• Display of relative humidity• Laundry drying function• Timer Function• 2 fan speeds • Cable winding     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 47 liters / day air volume 375 m³/ h Maximum room size 120 m² (100 m³) Minimum room size 4 m² (10 m³) temperature range 5 - 32°C moisture range 35 - 100 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 5.4 A Power consumption max. 1060W Recommended Coverage 10 A Cable length approx. 1.6 m Plug EU plug with Swiss fixed adapter refrigerant R290 (145g) GWP3 water bucket 6 Liter Pump integrated, lifting height up to 4 m operating noise 50 dB(A) at 1 m distance47 dB(A) at a distance of 2.5 m Dimensions L x W x H 282 x 392 x 616 mm Weight 19.5 kg defrosting automatic Recirculation, electronic dehumidification automation Hygrostatgesteuert Ventilator radial, 2-stage blower automatic shut-off when bucket is full and prefilter and Timer and Continuous operation possible and Laundry drying mode and Display shows current room humidity, set air humidity memory function yes (automatically saves set values) hose connection yes, short hose piece included in the delivery guarantee 2 years Documents / Downloads   User Manual German   User manual French   User manual Italian   User manual English

Learn more More Fewer

The robust and powerful all-rounder   "Whether for drying out after water damage, new building drying, or maintaining dry conditions in heated and unheated storage rooms - the 350S is a universally applicable dehumidifier with high-quality workmanship and reliable operation. It is manufactured in a specialized plant in Europe. It is built to last, easy to maintain, rarely requires servicing, and is very affordable considering its power and quality."  Easy handling The desired target humidity can be continuously regulated between 32 - 100% using a mechanical hygrostat, and continuous operation is also possible. With the used lamella evaporator, target humidities below 40% r.H. are difficult to achieve; however, this technology shows impressive dehumidification power in temperate and humid environments. Particularly useful in larger areas is the high air circulation volume of a substantial 1000 cubic meters per hour. With its stable trolley construction and large wheels, frequent relocation to different sites can be easily carried out.  Bucket, direct hose connection and optional pump kit The water, which is extracted from the air, flows into the 6-liter bucket. This is placed on a scale that automatically interrupts operation when full. A control light indicates the full status in this case. Furthermore, there is the possibility to connect a hose if the water can be drained directly. The hose must have a slope towards the drain in this case. If this is not possible, a suitable pump kit is optionally available, with which the water can be pumped upwards and also outwards. "The operating switch and level warning light are protected against dust and splashing water by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position."     For continuous operation on construction sites   The possibility of connecting an external condensate drain – optionally with a condensate pump if needed – makes the construction dryer also ideally suited for longer unattended drying tasks, e.g. in construction drying.     Optional counters The delivery does not include an hour or consumption meter. You can order these from us if desired (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and power consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant.     Hydrofluorolefin (R-454C) as an environmentally friendly refrigerant in dehumidifiers   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection."   The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).   Supplement Plus for the Environment: Due to its excellent thermodynamic properties, hydrofluoroolefin (R-454C) is a particularly energy-efficient refrigerant, thereby additionally reducing your energy costs.     Advantages at a Glance • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional)• Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performance at 30 °C / 80 % r.H. 55 liters / day air volume 1000 m³/ h Maximum room size 140 m² (350 m³) Minimum room size 8 m² (20 m³) temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. Voltage 220 - 240 V/50 Hz rated current consumption max. 6.1 A Power consumption max. 1400W Recommended Coverage 10 A Cable length approx. 3 m Plug EU plug with Swiss adapter refrigerant R454C (650g) GWP146 water bucket 6 Liter operating noise 54 dB(A) at 1 m distance 51 dB(A) at a distance of 2.5 m Dimensions L x W x H 530 x 500 x 965 mm (incl. guide bracket) Weight 39 kg defrosting automatic Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower automatic shut-off when bucket is full and prefilter and Timer no (operation on timer possible) Continuous operation possible and memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) Pump optional available (not included in the scope of delivery) guarantee 2 years

Learn more More Fewer

The 650S is a robust and powerful construction dryer that stands out for its versatility. It effortlessly handles demanding tasks such as drying after water damage, new construction drying, and maintaining dryness in heated and unheated storage rooms. Manufactured in a specialized European facility, this dehumidifier impresses with its high-quality workmanship and reliable operation. The durable construction of the 650S guarantees a long lifespan, while the easy maintenance and low upkeep costs make operation even more economical. Despite its impressive performance and quality, the 650S is available at an extremely attractive price, making it an excellent choice for professional users.Easy to use The desired target humidity can be continuously regulated between 32 - 100 % using a mechanical hygrostat, and continuous operation is also possible. Particularly useful in larger areas is the high air circulation volume of a substantial 925 cubic meters per hour. With its stable cart construction and large wheels, frequent changes of location can be easily carried out.     Direct hose connection and optional pump kit   Due to its very high dehumidification performance, this dehumidifier has a direct connection for condensate drainage instead of a water tank. The hose must have a slope towards the drain. If this is not possible, a suitable pump kit is optionally available, which can pump the water upwards and also outwards.   The operating switch is protected against dust and splashes by a protective cover, and a slotted hygrostat rotary switch prevents unwanted adjustment of the switch position.     Professional Hot Gas Defrosting   Inside, a professional hot gas defrosting automatic system ensures effective dehumidification results. The fin evaporators unleash their power particularly in temperature ranges above 10°C and in the range above 40% humidity. Technically, the dryer can be used at room temperatures down to about 5°C, even in unattended continuous operation.     Optional counters   Included in delivery is no "Hour or consumption meters are included. You can order them from us upon request (the housing is standardly prepared for retrofitting). You have the choice between a pure hour meter or the combined dual meter, which measures hours and electricity consumption. The meters are MID compliant. Outside of Switzerland, dryers in professional use must already be MID compliant."     Hydrofluoroolefin (R-454C) as an environmentally friendly refrigerant   "Every year, several million tons of environmentally harmful CO2 emissions (greenhouse gases) are released into the air due to synthetic refrigerants. Therefore, the use of alternative refrigerants is one of our most important goals. By using hydrofluoroolefin (R-454C) as a refrigerant, this dehumidifier makes a valuable contribution to climate protection." The natural refrigerant hydrofluoroolefin (R-454C) is an organic compound and belongs to the hydrocarbons. Unlike synthetic refrigerants, the environmentally friendly hydrofluoroolefin (R-454C) has neither ozone depletion potential (ODP=0) nor a significant greenhouse effect (GWP=146).     Advantages at a Glance   • High dehumidification performance even at low temperatures• Robust plastic-coated metal housing• Thanks to the roll piston compressor, it is transportable and storable in any position.• Stable carriage construction• Automatic hygrostat-controlled dehumidification operation• Quality hot gas defrost automatic system• Option to retrofit MID-compliant dual meter for operating and kilowatt hours (optional) • Option to add a suitable pump kit that can be connected directly to the device (optional)     Technical data   dehumidification performanceat 30 °C / 80 % r.H. 91 liters / day Air volume 925 m³/ h Maximum room size 230 m² (550 m³) Minimum room size 4 m² Temperature range 5 - 32°C Moisture range technical Moisture Range Practice 32 - 90 % r.F. 40 - 90 % r.F. voltage 220 - 240 V/50 Hz Nominal current consumption max. 9.5 A Power consumption max. 2100 W Recommended Coverage 16 A Cable length approx. 3 m Plug EU plug with Swiss fixed adapter refrigerant R-454C (1050g) GWP 146 water bucket no bucket, only hose connection suitable hose: 16 mm inner diameter Operating noise 56 dB(A) at 1 m distance53 dB(A) at a distance of 2.5 m Dimensions L x W x H 616 x 511 x 1022 mm (incl. guide bracket) Weight 52 kg Automatic defrosting Heissgas dehumidification automation Hygrostatgesteuert Ventilator axial, single-stage blower Prefilter and Timer no (operation on timer possible) Continuous operation possible and Memory function yes (mechanically stores set values) hose connection yes (no hose included in the delivery) - 16 mm Pump optional available (not included in the delivery) Guarantee 2 years

Learn more More Fewer

This nozzle is designed to allow the entire air volume of the incoming or outgoing air to circulate under the door.  The nozzle is pushed under the door and connected to air hoses on both sides of the door. To ensure that the entire volume of air can be transported under the door, the passage inside the nozzle is expanded to the maximum width, allowing the air to circulate well despite the low flow height. A protective mat (protector) protects the floor underneath from scratches.  In this way, the complete drying installation can be flexibly relocated to rooms that have minimal noise disturbance for the affected party. Furthermore, the drying time is reduced if the room can remain closed. The nozzle is designed as standard for connecting hoses with a 38 mm inner diameter. For the use of 50 mm hoses, a separate adapter ring is available, which can be easily slipped over the nozzle to increase the diameter.  Technical data  connection nozzle I 2 on both sides suitable hose diameter 38 mm Masse (B x H x T) 400 x 74 x 157 mm Weight 1.7 kg Trotec article no. 6.100.000.160 guarantee 2 years

Learn more More Fewer

intake filter screenSpare part for insulation layer dryers of the VX series for drying in overpressure and underpressure processes. Trotec Article No. 7.700.000.001

Learn more More Fewer

This separator belongs to the family of the Trotec drying system "Multiqube". It can be integrated into this system, but can also be freely combined with any existing devices from other manufacturers via hose connections. Compared to other brands, the price-performance ratio of this model is excellent.     microfilter system   "It features an integrated microfilter system with a maintenance-friendly magnetic closure filter compartment. This makes it a flexibly deployable integral solution with all pre-HEPA filter stages in just one device."   Advantage: improved flow-optimized filter technology, faster assembly, less material - and space requirement - no separate additional microfilter housings necessary.     Use in combination with a compressor   The connected compressor's automatic shut-off and restart system provides optimal overflow protection that does not require monitoring. With the drying of the insulation layer, the processing of areas up to 40 m² is easily possible.     Extended application possibilities   The "TTKwic" quick couplings attached to the device allow for the connection of up to two dehumidifiers with a condensate pump, which pump the extracted water into the separator. This results in a central water discharge (hose connection Ø 12mm).     Advantages at a Glance   • Approx. 25% performance-enhanced filter technology thanks to filter compartment with microfilter cassette• Stainless steel element for water separation and fine filtration• Residual water drainage function• Active overflow protection through automatic switching on and off of the connected insulation layer dryer• Integrated connection cable• Cable collector• Extremely lightweight, robust, and particularly maintenance-friendly construction• Transport wheels with locking brakes• Maintenance quick-release fasteners• Emergency stop switch• Overflow sensor with automatic shut-off• Space-saving stackable• Lightweight material base: impact-resistant and robust construction, 100% recyclable • Two integrated TTKwic quick couplings for central water drainage for up to two connected dehumidifiers• Easy handling - easy to clean   scope of delivery   MultiQube, a microfilter cassette     Technical data  Volume 17 Liter power connection 230 V / 50 Hz Plug EU plug with Swiss fixed adapter Power consumption 320 W Number of air connections 3 suitable hose diameter 38 mm fine filter 3 pieces class F8 Weight 11.3 kg Masse (B x H x T) 440 x 395 x 420 mm Trotec article no. 6.100.000.006 guarantee 2 years

Learn more More Fewer

"Accessories for water damage drying. It has a diameter of 38mm and is suitable for connecting corresponding PVC hoses. The distributor directs the air where you need it. It allows for flexible positioning of the hoses. With external thread."  1 piece = 10 pack Trotec Article No. 6.100.009.051

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be introduced through the edge strip or other joints after removing the bases. Comparable to the flat electrode pair M 6-Bi 200. • Isolated shaft to exclude surface moisture.• The electrode length is 200 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

The advantage of flat electrodes (1 mm flat) is that drilling in the surface is eliminated and the electrodes can be inserted through the edge strip or other joints after the bases are removed. Comparable to the flat electrode pair M 6-Bi 300. • Isolated shaft to exclude surface moisture.• The electrode length is 300 mm.• Compatible with Gann MK8 measuring cables and UNI measuring devices Scope of delivery: 1 pair (= 2 electrodes according to photo) 

Learn more More Fewer

Trotec TTK 355 S – Kraftvoller Bautrockner für härteste Einsätze Ob bei der schnellen Reduktion hoher Luftfeuchtigkeit oder zur zuverlässigen Trocknung grossvolumiger Räume – der TTK 355 S ist exakt für solche Herausforderungen konzipiert. Seine beeindruckende Leistung verdankt das Gerät der effektiven Kombination eines leistungsstarken Rollkolbenkompressors mit einem Qualitätsgebläse, das Luftmengen von bis zu 490 m³/h verarbeitet. Diese hohe Luftumwälzung erlaubt es dem optimierten Wärmetauschersystem, kontinuierlich große Mengen Feuchtigkeit aus der Raumluft zu ziehen – bis zu 70 Liter pro Tag mit nur einem Gerät. Ein besonderes Plus bietet die integrierte Heissgas-Abtauautomatik: Sie verhindert Entfeuchtungspausen durch feste Abtauintervalle, wie sie bei vielen anderen Geräten üblich sind, und sorgt so für eine gleichmässige und effiziente Leistung – selbst bei kühleren Einsatzbedingungen. Mobilität trifft auf Robustheit Auch für wechselnde Einsatzorte und raue Umgebungen ist der TTK 355 S bestens gerüstet. Das robuste Fahrgestell mit praktischer Griffbügelstange und grossen Gummirädern macht den Transport – auch über Treppen oder unebenen Boden – denkbar einfach. Die verbauten Gummiräder sind abriebfest und hinterlassen keinerlei Spuren auf empfindlichen Bodenbelägen. Dank der Rollkolbenkompressor-Technologie kann der TTK 355 S zudem in nahezu jeder Position transportiert werden. Ein spezielles Schutzsystem für die Elektronik bewahrt die sensiblen Komponenten zuverlässig vor Feuchtigkeit und Schmutz – für eine lange Lebensdauer auch unter Baustellenbedingungen. Durchdachtes Design – innen wie aussen Auch optisch überzeugt der TTK 355 S: Die Technik steckt in einem funktional gestalteten, widerstandsfähigen Gehäuse im markanten Trotec-Industriedesign – formschön, geschützt und praxisorientiert. Der stapelbare Aufbau mit praktischen Nutführungen auf der Oberseite ermöglicht eine platzsparende Lagerung und einen sicheren Transport mehrerer baugleicher Geräte. Ihre Vorteile auf einen Blick: 100 % Trotec – Entwicklung, Design und Fertigung Hohe Entfeuchtungsleistung, auch bei niedrigeren Temperaturen Schutz der Elektronik vor Staub und Feuchtigkeit Wartungsfreundliche Konstruktion Einfaches Handling und flexibler Transport Rollkolbenkompressor: transportabel in jeder Lage Stapelbar für Lagerung und Transport Multistapelfähig mit baugleichen Modellen Integrierter Hitzeschutz für den Kompressor Deutsches Industriedesign mit Geschmacksmusterschutz Sicherer Betrieb bei hoher Wärme- und Feuchtelast Bei der Sanierung von Wasserschäden oder ähnlichen Anwendungen herrschen oft extreme Bedingungen: hohe Luftfeuchte bei gleichzeitig hohen Temperaturen. Dies stellt eine grosse Belastung für Kältetrockner dar. Die sogenannte „35er-Regel“ verdeutlicht die Problematik: Liegt die Raumtemperatur dauerhaft über 35 °C, sinkt die Lebensdauer herkömmlicher Kältetrockner drastisch – auf weniger als 35 %. Ursache ist der steigende Druck im Kältemittelkreislauf, der den Kompressor stark belastet. Zwar arbeiten die Geräte zunächst weiter, sie operieren aber weit über ihrer Belastungsgrenze, was zu vorzeitigem Ausfall führen kann. Adsorptionstrockner stellen unter solchen Bedingungen keine wirtschaftliche Alternative dar – ihr Energiebedarf ist bei vergleichbarer Entfeuchtungsleistung deutlich höher. Intelligente Schutzfunktion serienmässig Deshalb sind die TTK-S-Modelle mit einem intelligenten Kompressor-Hitzeschutz ausgestattet. Sensoren kontrollieren kontinuierlich die Temperaturentwicklung im Gerät. Bei Überhitzung schaltet sich der Kompressor automatisch ab, während der Ventilator weiterläuft. Sobald sich das System wieder im sicheren Temperaturbereich befindet, nimmt der Kompressor selbstständig den Betrieb wieder auf. Dieser Schutzmechanismus verlängert nicht nur die Lebensdauer des Geräts, sondern schützt zugleich die zu trocknenden Materialien und die Gebäudesubstanz vor hitzebedingten Schäden. Entfeuchtungsleistung bei 20 °C / 60 % r.F. 27  Liter / Tag bei 30 °C / 80 % r.F. 55  Liter / Tag Technische Daten Luftmenge Stufe max. 490 m³/h Raumgrösse  140 m² / 350 m³ Temperaturbereich min.  5 - 32 °C Feuchtebereich min.  40 - 90 % r.F. Netzanschluss 220 - 240 V, 50 Hz Nennstromaufnahme 6.1 A Leistungsaufnahme 1.4 kW empfohlene Absicherung 10 A Anschlussstecker EU-Stecker mit Schweizer Fixadapter Kabellänge 3 m Rollkolbenkompressor   Kältemitteltyp R-454C Kältemittelmenge 650 g GWP Faktor 146 CO2 -Äquivalent 0.0949 t Druck Saugseite  0.6 Mpa Druck Austrittseite 2.2 Mpa max. zulässiger Druck 3 Mpa Masse (H x B x T) 725 x 380 x 390 mm Gewicht 39 kg Wassereimer 6  Liter + direkter Schlauchanschluss Schallpegel in Abstand 1 m 54 dB(A) Trotec Artikel-Nr. 1.120.000.163 Garantie 2 Jahre

Learn more More Fewer