Replacement filter block for air purifier WDH-80AShipping costs for 1 item: Fr. 10.- (Based on B-Post, further shipping options can be viewed in the shopping cart) Technical dataWeight: 4kg

Learn more More Fewer

Filter set of 3 filters (1 x HEPA, 1 x activated carbon, 1 x catalyst) for air purifier AP1101consumablesEnrichment:5% on 2 complete filter packages10% off 3 complete filter packagesShipping costs for 1 set: Fr. 10.- (Basic B-Post, further shipping options can be viewed in the shopping cart) Technical data1 x HEPA-Filter1 x activated carbon filter1 x Catalytic converter filterDimensions: Length 35 cm, Width 27 cm, Height 1-2 cm

Learn more More Fewer

Replacement filter set of 3 filters (1 x HEPA, 1 x activated carbon, 1 x catalyst) for air purifier C03.consumables.

Learn more More Fewer

The replacement motors for Oasis devices, strength 9W/230V. These are quality motors from the renowned manufacturer EMB Papst.this 9W motor fits these construction dryers:- Oasis 75 / 125 / 165- Oasis Evolution 140 / 220 / 270- Oasis D150 / D165- Krüger Airsec 75 / 75TH / 125 / 125TH / 165 / 165TH- Roth-Kippe Sonora 16 / 26 / 36- Lübra OD 125TH / 165TH- AxAir 125 / 165Not included"Impeller, impeller screw, and motor mount are not included in the delivery. These parts can also be optionally ordered from us."Important: new enginesThe engines of the earlier series are no longer available in their original design (rounded housing) and can no longer be ordered from the manufacturer. At that time, a distinction was still made between weaker devices (5W motor) and stronger devices (9W motor).• The new motors have exclusively 9W power, but are also suitable for the weaker dehumidifiers.• The metal bar to which the motor is attached must also be replaced with the new motor. This is not included in our delivery of the replacement motor.• The old impeller as well as the mounting disc of the old motors still fit the new motors.Technical data  Recording: 0.22A Operating voltage: 230V/50-60Hz revolutions: 1550/min

Learn more More Fewer

Caster wheels (without brakes) for dehumidifiers Dryfix Quadro Q40 and Q80. Plastic, black, available individually.The roles are screwed to the bottom of the housing, and the replacement can be easily done with a few hand movements and the appropriate screwdriver.

Learn more More Fewer

The "B2-PTC" is a very effective heater for rooms, cars, and caravans.The ceramic heating element provides an incredibly good efficiency of input energy to generated heat. It is therefore ideal wherever only standard household sockets are available, but maximum heating power is required.It is also noticeable that the heating phase is much faster, as the heater reaches operating temperature within a few seconds. It heats the air by a whopping 65°C (difference between intake air temperature and exhaust air temperature), which is almost double the difference compared to conventional construction heaters. Therefore, this heater should not be placed within reach of children.The heating power can be selected in two stages: 1000W or 2000W. The target temperature is determined via a stepless thermostat controller.Normal current 230/V, min. 10 Amperes, Swiss plug with connection cable.Product advantages• Room thermostat included• No oxygen consumption• Odorless, no exhaust gases, no condensate water• Quiet running• Motor with thermal protection• Overheating thermostat• Built-in thermostat• Automatic Reset   Technical data  Dimensions (W x H x D)  200x200x200 mm Weight 2.5 kg Housing color Metal yellow powder-coated Protection class IP21 Selectable heating power 1000 / 2000W insurance 8.7 A Motorspannung 230 V Motorstrom 0.2 A airflow 97 m³ / h temperature range 0 - 40 °C guarantee 2 years

Learn more More Fewer

Practical, robustly built frame made of galvanized metal. With 4 small wheels (two of them with brakes) for the mobile setup of the WT clothes dryers of the current series from Aerial. The dryer is simply hung into the designated holder. Suitable for: WT230WT240WT250WT280 Dimensions (H x W x D): 1762 x 496 x 641 mm   

Learn more More Fewer

Practical chassis, suitable for the dryers of these Krüger Secomat dryers:Secomat 100 (Art. 387.01/without heating)Secomat 100H (Art. 387.04/with heating) Secomat 150 (Art. 388.01/without heating) Secomat 150H (Art. 388.04/with heating) Secomat 200 (Art. 389.01/without heating) Secomat 200H (Art. 389.04/with heating)   The rolling frame is made of sturdy metal and features 4 wheels, 2 of which have brakes. It is ideal for situations where the dryer cannot be mounted directly to the wall, or when the device is used in different rooms. At the bottom, there is a metal plate on which the bucket for the condensate can be placed. All the necessary mounting materials for the Secomat are included in the delivery of the dryer.Technical data Material: metal, stainless Weight: 14.4. kg Masse H x B x T: 1267 x 620 x 800mm

Learn more More Fewer

Practical chassis, suitable for the tumble dryers     Krüger Secomat 2 (Art. 396.01 / 396.03) Krüger Secomat 4 (Art. 397.01 + 397.03)Krüger Secomat 75 (Art. 386.01)Krüger Secomat 75H (Art. 386.04)   The rolling frame is made of sturdy metal and features 4 wheels, 2 of which have brakes. It is ideal for situations where the dryer cannot be mounted directly to the wall, or when the device is used in different rooms. At the bottom, there is a metal plate on which the bucket for the condensate can be placed. All the necessary mounting materials for the Secomat are included in the delivery of the dryer.     Technical data Material: metal, stainless Weight: 13.4. kg Masse H x B x T: 1267 x 520 x 740mm

Learn more More Fewer

Practical chassis, suitable for the tumble dryers Krüger Secomat 400 (Art. 380.01/without heating) or Secomat 400H (Art. 380.04/with heating).   The rolling frame is made of sturdy metal and features 4 wheels, 2 of which have brakes. It is ideal for situations where the dryer cannot be mounted directly to the wall, or when the device is used in different rooms. At the bottom, there is a metal plate on which the bucket for the condensate can be placed. All the necessary mounting materials for the Secomat are included in the delivery of the dryer.  Technical data Material: metal, stainless Weight: 27 kg Masse H x B x T: 1267 x 1239 x 800mm

Learn more More Fewer

The Fral FDNF62 dehumidifier is a robustly built quality dryer for commercial, industrial, garages, and basements. It has a powerful performance and is suitable for rooms starting from 1°C! Relatively quiet operation.Available in two versionsa) With bucketfor private, construction, industry with non-acidic air, with large bucket and direct hose connection b) My Pumpfor private, construction, industry with non-acidic air, with pump (delivery height 4 m) and direct hose connectionBoth versions are available on request for an additional charge of Fr. 300.- with a special coating for use in acidic air, e.g. swimming pools (chlorine/bromine, water surface up to 30m²), dairies, industry. Due to well-developed hot gas defrosting, the FDNF62 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity areas, where the FDNF62 still extracts water from the air, while other dryers have long stopped producing any drops (according to our tests, clearly below the threshold of 30% relative humidity)."It is suitable for unattended continuous operation. The condensate can be collected in the large 12-liter bucket or discharged directly with the hose (3/4" thread) depending on the chosen version."The FDNF62 stands on 4 stable wheels and has side carrying handles for easier mobility. Due to its size and the massive metal housing, it may need to be carried by two people up stairs. Highly recommended in terms of quality.It is suitable- Dehumidifiers for commercial and industrial use- for the drying of basements and garages up to 130m²- for drying water damage- for unattended continuous operation- for operation with a timer"When the desired target humidity is reached, the device completely shuts down. The built-in operating hour counter clearly and quickly shows how long the device has been in use."Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 52 Liters20°C/80% r.H.: 27 Liters20°C/60% r.H.: 19 liters10°C/60% r.H.: 10 Liters(r.H.=relative humidity)   "Due to the transition to a new, environmentally friendly refrigerant, this model is being technically revised and is temporarily unavailable. The new version will be more efficient. It will also have both a bucket and a connection for an optional pump. Thus, the decision of which version to choose is eliminated. If you are interested, we would be happy to inform you about the expected availability / delivery time."   Technical Data (old version)  Tension 230V / 50Hz Power consumption max. 950W / 700W (at 20°C/60% r.H.) Sound pressure level 1 m distance 54 dB(A) (our measurement) 2.5 m distance 52 dB(A) (our measurement) dehumidification performance 52 liters/day (30°C / 80% r.H.)  amount of recirculated air 600m³/h condensate tank 12 liter water tank and hose connection or Condensate pump and hose connection Compressor Rotary compressor  refrigerant R407C (650gr.) Dimensions (H x W x D)    including wheels 79 x 45 x 42 cm Weight   44 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C Area of application up to 130 m² or 390 m³ Swiss plug Yes   hose connection Yes operating hour meter Yes guarantee 2 years

Learn more More Fewer

Airwell window air conditioning unit WFAE with 2.75 or 3.7 kW nominal cooling capacity and refrigerant R32. The window air conditioning unit WFAE, available in two power levels, is simply pushed into a correspondingly prepared window or wall opening. In addition to cooling, the unit also offers a dehumidification function. The devices operate with energy-efficient inverter technology and the latest, specially environmentally friendly refrigerant generation R32. Operation is done directly on the inside of the unit or via the included remote control. During installation, the unit should ideally be supported on the outside by steel beams (energy efficiency class A). The unit is supplied with a Schuko power cable and a fixed adapter Schuko - T12.

Learn more More Fewer