The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The plug-in electrode tips M 20-Bi 200 and M 20-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are made of V2A and are designed for depth measurement in old buildings, wooden beams (e.g., in roofs), and soft bonded building materials.The electrode pair is insulated at the shaft and approximately 200 mm (M20-Bi200) or 300 mm (M30-Bi300) long."For the use of the electrode tips, either an M6 insert electrode pair and/or an M20 impact electrode is required."Suitable base devicesThe electrode tips can be used with all hydrometers that are based on the resistance measurement method:• CH17• BL E• HB 30• HT 85 T• UNI2• RTU 600  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical dataM20-Bi 200 (Gann Article No. 31004360):200 mm [L] x 4 mm [Ø]M20-Bi300 (Gann Article No. 31004365): 300 mm [L] x 4 mm [Ø]2 year guarantee

Learn more More Fewer

The M6 insertion electrodes are accessories for Gann professional measuring devices such as Uni2 and all hydrometers that are based on the resistance measurement method. The electrodes are always used in pairs. They measure the resistance between the two insertion tips, which should ideally be inserted into the test material at a distance of about 8 - 10 cm from each other.The M6 is suitable for measuring hard bound building materials (e.g. concrete or screed). "For use, you need a basic measuring device such as Uni1 or Uni2 as well as a measuring cable MK8. The delivery includes 10 electrode tips of 40 and 60 mm length each. The M6 also serves as a carrier for other electrode pairs:"Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250Suitable base devices• Hydromette BL E, Hydromette HB 30, HT 85 T, M 4050, RTU 600, UNI 2 The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Gann Article No.: 310037002 carrying handles, incl. 10 electrode tips of 40 and 60 mm

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The M6-150 and M6-250 plug-in electrode tips are accessories for Gann professional measuring devices such as the Uni2 and others. The probes are uninsulated and have an extra thin diameter of only 3mm. They are therefore suitable for moisture measurement in construction and insulation materials via a floating joint or through a joint cross.The electrode pair is uninsulated. Available in two lengths, approx. 150 mm (M6-150) or 250 mm (M6-250) long."For the use of the electrode tips, either an electrode M 6 and/or an electrode M 20 is required."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.Suitable base devices• CH17• BL E• HB 30• HT 85 T• IT 2• RTU 600  Technical data M6-150 (Gann Article No.: 31003706):150 x 3 mm ØM6-250 (Gann Article No. 31003707):250 x 2 mm Ø

Learn more More Fewer

The flat electrodes M 6-Bi 200 and M 6-Bi 300 are accessories for Gann professional measuring devices such as the Uni2 and others. They are suitable for measuring moisture in edge and floating joints. For example, when water needs to be detected that is located under the underlayment.The electrodes are insulated at the shaft to avoid influencing the measurement result.The electrode pair is insulated at the shaft and they are approximately 200 mm (M6-Bi200) or 300 mm (M6-Bi300) long."An electrode pair M6 is required as the carrier of the flat electrodes."The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data Mass M6-Bi200 (Gann Article No. 31003702):200 x 10 x 0,8 mm Mass M6-Bi300 (Gann Article No. 31003703):300 x 10 x 0,8 mm

Learn more More Fewer

The measuring cable MK 8 is an accessory for resistance-based measuring devices from Gann. It connects the base device with the corresponding measuring electrodes such as M6 and others.Matching electrode pairs• Flat electrode pair M 6-Bi 200 and M 6-Bi 300• Plug-in electrode tip pair M 20-Bi 200 and M 20-Bi 300• Plug-in electrode tip pair M 6-150 and M 6-250  Suitable base devices• Hydromette BL E, BL H 40, BL H 41, BL HT 70, H 35, HB 30, HT 65, HT 85 T, M 2050, M 4050, RTU 600, UNI 2  The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.  Technical data  Gann Article No.: 31003750 Length: 1 m

Learn more More Fewer

The active electrode RFT 28 EL is a sensor for measuring air humidity and air temperature with a fast measurement speed. It is an addition to one of the Gann-Hydromette base stations listed below and cannot be operated independently of them.The fast response speed of the sensor allows for the detection of leaks, e.g. door gaps or leaky windows, as even slight air currents can influence the measurement display. The sensor also adapts to the ambient climate even when switched off. For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out.    Suitable base devices  The electrode can be used with all hydrometers that support this method, namely with the following base devices:• Hydromette M 4050• Hydromette RTU 600• Hydromette UNI 1• Hydromette UNI 2   The manufacturer Gann is one of the leading producers of high-quality moisture measuring devices from Germany. Gann measuring devices are considered the standard among professionals in construction drying and water damage drying. They are also recognized by damage experts in insurance.   Technical data Gann Article No.: 31003155Measuring range humidity: 7 - 98 % r.H.Measuring range air temperature: -10 - +80 °CMeasurement tolerance humidity: ± 1.8 % (at 10-90% r.H.)Measurement tolerance air temperature: ± 0.75 °C (-10 to +55 °C) The response time of the air humidity sensor (slightly moving air, ambient temperature: 20 - 25 °C) is 20-30 seconds depending on the humidity difference.Warranty: 2 years  

Learn more More Fewer

The RHT 37 BL 160 is an electrode for measuring air humidity and air temperature - specifically suitable for use in bulk materials and solids (e.g. masonry or screeds). Its areas of application include moisture analysis, damage assessment, monitoring of construction drying, as well as testing the readiness for installation of floor and wall coverings.The sensor tube has a diameter of 5.5 mm, which also allows measurements in joints without having to risk damaging wall or floor tiles. "In conjunction with a hydrometer, the air humidity in the borehole can be measured and the degree of saturation or moisture content of certain set building materials can be determined using sorption isotherms." "For particularly precise measurements, the device should be exposed to the environment to be measured for 10 - 15 minutes, so that any temperature differences between the electrode and the surrounding climate can be balanced out."Suitable base devicesBL UNI 11CH17

Learn more More Fewer

  The air heater BLP 33 M (33kW) and the more powerful version BLP 53 M (53kW) are a simple solution for quickly heating ventilated zones and rooms using gas. The heating power is strong and adjustable via a rotary switch.In addition to a commercially available gas bottle (available, for example, at gas station shops), a 230V socket is required for the operation of the control system and the fan. The delivery includes the ready-to-plug device, including a connection hose with a non-return valve for connecting to the gas bottle.ImportantThe combustion of gas consumes oxygen. Therefore, this heater must not be used in closed, poorly ventilated rooms, especially not in small rooms. Furthermore, a safety distance from flammable materials must be observed. The heater must also not be operated in rooms where the air contains explosive gases.Product features• Manual ignition• Regulator includes a safety valve that stops the gas flow in the event of cracks in the gas line.• Pressure reducer and gas line included in the set• Motor with thermal protection• Overheating thermostat• Adjustable Heat• Robust and durable construction• Easy maintenance• Safety gas valve with thermoelement• Solenoid valve Technical data    33M 53M  Dimensions ( L x W x H)  552 x 220 x 342 etc   605 x 276 x 444 etc  Weight 9 kg 15 kg  Housing color Metal yellow powder-coated  air flow  1000 m3/h   1450 m3/h  Adjustable heating power  18-33 kW   36-53 kW  insurance 0.26 TO   0.48 TO  Motorspannung 220-240V / 50Hz  Pressure 0.75 - 1.5 bar Gas Propane/Butan guarantee 2 years  

Learn more More Fewer

This mobile gas heater is a simple solution for quickly warming ventilated zones and rooms. The heating power is strong and adjustable via a rotary switch.In addition to a commercially available gas bottle (available, for example, at gas station shops), a standard power outlet is required for the operation of the control system and the fan. The delivery includes the ready-to-plug device, including a connection hose with a non-return valve for connecting to the gas bottle.ImportantThe combustion of gas consumes oxygen. Therefore, this heater must not be used in closed, poorly ventilated rooms, especially not in small rooms. Furthermore, a safety distance from flammable materials must be observed. The heater must also not be operated in rooms where the air contains explosive gases.Product features• Manual ignition• Regulator includes a safety valve that stops the gas flow in the event of cracks in the gas line.• Pressure reducer and gas line included in the set• Motor with thermal protection• Overheating thermostat• Adjustable Heat• Robust and durable construction• Easy maintenance• Safety gas valve with thermoelement• Solenoid valve Technical data     33M 53 M  Dimensions ( L x W x H)  552 x 220 x 342 etc   605 x 276 x 444 etc  Weight 9 kg 15 kg  Housing color Metal yellow powder-coated  air flow  1000 m3/h   1450 m3/h  Adjustable heating power  18-33 kW   36-53 kW  insurance 0.26 TO   0.48 TO  Motorspannung 220-240V / 50Hz  Pressure 0.75 - 1.5 bar Gas Propane/Butan guarantee 2 years  

Learn more More Fewer

Sliding rollers for laundry line system (available individually)Consisting of a sliding roller made of durable plastic, screw, nut.For self-assembly on connection rails.Suitable for laundry line connecting rails from Dryfix and Krüger SunLine. Available in the colors black, yellow, blue. Technical dataRolls: Nylon, total diameter 2.0 cm, hole diameter 0.9 cmScrews: Steel/zinc-coated, total length 2.4 cm, of which M5 thread 1.1 cm, round pin 0.8 cm, hexagon crown 0.5 cm 

Learn more More Fewer