The compact air conditioning units "WFD" from AIRWELL are quickly installed. Essentially, the units are pushed through wall openings or appropriately prepared windows. One side extends into the room to be cooled, while the other typically blows the extracted heat outside, but it can also be directed into an adjacent room. With these window air conditioners, rooms can be cooled, but they can also be used solely for dehumidification if needed. The side with the operator panel faces into the room, with only a short part of the device protruding from the wall. This side also contains the air intake area with the inserted filter as well as the outlet for the cooled air. The part that extends outward, on the other hand, is somewhat longer and should be supported by a console or a bracket. The device has two air circuits: One refers to the interior space. It draws in warm room air and blows cooled air into the room. The second circuit is located in the outdoor area, where it draws in outside air to release the waste heat outside.The operation can be carried out either via the keyboard on the device itself or via the infrared remote control included in the delivery. A display shows the values.Functions of the operator panel• On/off switch• Setting of the desired operating mode (only recirculation, dehumidification, or air conditioning)• Setting the desired target temperature using the up/down arrow keys in the range between 16°C and 30°C.• Setting of the desired ventilation level 3-stage + auto program• Setting whether the air outlet louvers should swing vertically or remain stationary (horizontal alignment can be adjusted manually)• Duration limitation with timer, half-hourly up to a maximum of 24 hoursDrainage of condensate water"During cooling/dehumidification, moisture is removed from the air. This accumulates as condensate in the device. There are two selectable options for drainage:"a) As standard, water drips over the condenser coils (the warm part of the heat exchanger in the device) and automatically evaporates with the blown warm air. This solution is generally used as it simultaneously increases the cooling performance. However, it may cause a slight background noise.b) the water is drained through the existing hose connection, thus not evaporated. Converting to this solution requires opening the housing, but can be done in a relatively short time. This solution causes hardly any additional noise.operating noiseThe operating noise primarily depends on the selected fan speed. The stronger the ventilation, the more noticeable the operating noise is. Compact air conditioning units are significantly more pleasant in terms of volume, unlike mobile air conditioning units with exhaust hoses, but they are not comparable to fixed installed split air conditioning systems.Air filterIn the intake area of the air, a filter is inserted, which should be cleaned occasionally. The filter serves to ensure that as little dirt as possible accumulates in the device and also to prevent dust from being blown into the room. There is an LED light on the control panel that appears after every 250 operating hours to remind you to clean the filter.memory function"After a power failure, the WFD automatically resumes work with unchanged settings."Further informationInverterInverter technology is more economical because the compressor only runs with as much power as is currently needed, while conventional devices either operate at full power or not at all. In terms of operating noise, inverter devices are usually quieter as well, because full power is rarely called upon.Power supplyThe power supply is provided from the interior. A normal household socket is sufficient.angle of inclinationDuring installation, the back of the unit should be tilted a few millimeters downwards to avoid noise or vibrations.Refrigerants of the latest generation"With us, you will receive the latest series with R32 (propane) refrigerant. R32 is one of the most environmentally friendly refrigerants on the market and has a significantly lower environmental impact, approximately 600 times less than previous refrigerants."  scope of delivery- Compact air conditioning unit WFD in the desired strength with cable and plug- remote control- Operating instructions and service manualTechnical data     WFD009-C11   WFD012-C11   operating modes Cooling, Dehumidifying, Only Recirculation For rooms up to max. 30m² 40m² Cooling performance 2750 W 3700W connection voltage 1P/230V/50Hz insurance 10A Setting range temperature 16° - 30° C Power consumption 810 W 1090 W dehumidification performance 1.0 L/h 1.2 L/h Kühlmittel R32 / 510g R32 / 630g Operating noise at a distance of 1m Manufacturer specification fan speed 1 / 2 / 3 45 / 47 / 49 dB(A) Air circulation (Level 1 / 2 / 3) 310 / 350 / 380 m³/h 400 / 450 / 490 m³/h service Operator panel or remote control Mass (HxWxD) 375 x 560 x 710 mm 428 x 660 x 700 mm Weight indoor / outdoor unit 34 kg 46 kg guarantee 2 years

Learn more More Fewer

With this moisture meter, moisture in walls, masonry, floors, and wood can be measured easily. The process is non-destructive, as the device measures 2 cm deep using a sensor. It has a digital LCD display with backlighting as well as an easy-to-understand LED bar graph. The operation is incredibly simple – turn on the device and place it on the object to be measured. The measured moisture is displayed immediately. This allows you to quickly detect moisture and reliably monitor the drying progress.The measuring sensor on the back of the device is approximately 4 x 4 cm in size. The displayed value corresponds to the average humidity measured over this area. This results in a more balanced outcome than with a pure point measurement.No indirect measurement possible: the sensor must be placed directly on the material to be measured. For example, it cannot measure through wall or floor panels or through laminate/ parquet into the substrate underneath.Features and Benefits• Moisture display as LCD value and also as LED bar graph• Measure unsealed materials and surfaces such as walls, ceilings, floors, masonry, and wood.• Four different measurement modes selectable: hardwood, softwood, masonry, and walls (ceilings/floors).• Gentle moisture measurement without damaging the material surface• Lightning-fast single or series measurements• Housing made of shock-resistant plastic• Auto-calibration and holding (freezing) of the measurement value• Acoustic alarm for measurements outside the measurement range• Auto shut-off after 2 minutes of inactivity• No separate electrodes or cables required• Warning symbol for low battery (Battery warning indicator)• Illuminated display field• Ideal pre-testing device for all CM devices   application examples• Damage restoration and moisture localization• Shell construction / new construction or monitoring of the drying progress• Wood processing• Insurance industry"A 9V block battery is required for operation. This is already included in the delivery."  Technical data   Measuring ranges: 0% ~ 53% softwood               0% ~ 35% hardwood                    "Results of walls, ceilings, floors, and partitions correspond to the displayed relative values." Power supply:           Power consumption:             9 V Battery Penetration depth: 20mm accuracy ± 4% Application area: 0 ~ 40° C and 0 ~ 70% r.L. Advertisement: LCD-Display Power supply: 1 x 9 V Block Battery Dimensions (H/W/D):      170 x 75 x 30 mm Weight:    186 g (with battery) Guarantee: 2 years

Learn more More Fewer

"Fits all 3-pole plugs according to EU standards, e.g. Shuko/Germany, etc. The fixed adapter is pressed as an intermediate plug onto the existing foreign plug and cannot be removed without damage."CEE7/VII - CH Typ12for devices up to a maximum of 10A permitted"We also carry the reverse version in our range, for Swiss devices that are to be connected to European sockets."

Learn more More Fewer

A practical helper in the laundry room at a comfortable working height. Ideal for drying towels, T-shirts, underwear, etc..In contrast to the "Wall" models, the "Fold" is fixed to the wall and its height is not adjustable. However, it can be folded up to save space when not in use.The load capacity is 10 kg. Thus, it can also easily carry a line with dry or tumbled laundry.Characteristics• Wall-mounted laundry hangers, foldable• Fixed to the wall with 4 points• 8 tubes made of anodized aluminum, resistant to time and moisture. Ideal for indoors and outdoors.• High quality at a low price• Made in Italy 100% Dimensions (L x W x H): 60 x 57 x 9 cmTotal length of pipes for hanging laundry: 4.8 meters "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

The laundry rack is mounted to the wall with two guide rails. The rack hanging from it with drying rods is connected to a chain system. With this, it can be lifted to any height even when loaded, thanks to the pulley principle, without much effort. The laundry dryer offers space for 6.5 - 12m of laundry, depending on the desired version. The lowering height is a maximum of 1.30 m.The production of the laundry hangers mainly uses high-quality materials such as steel and anodized aluminum, which can withstand frequent use. As a result, the "Wall" is suitable for use in both indoor and outdoor areas. "Foxydry" is a quality product from Italy and is exclusively available with us in Switzerland.

Learn more More Fewer

Professional dehumidifier for demanding drying tasks, available in bucket or pump.The Fral F96 dehumidifier is a robustly built quality dryer for construction, trade, and industry. It has a very powerful performance and is also suitable as a large room dehumidifier for spaces up to 200m² (or 500m³) starting from 1°C! Relatively quiet operation.     Due to well-developed hot gas defrosting, the F96 is operational down to just above freezing point. Also very noticeable is its good performance in low humidity areas, where the F96 still extracts water from the air, in conditions where other dryers have long stopped producing any drops (according to our tests, clearly below the threshold of 30% relative humidity).It is suitable for unattended continuous operation. The condensate can either be collected in the removable 15-liter bucket (a scale measures the weight and automatically interrupts operation when the bucket is full), or it can be drained directly via a hose connection. The F96 is mounted on 2 stable wheels and has a metal handle for easier mobility. Due to its size and the solid metal housing, it may need to be carried by two people up stairs.It is suitable:• as a construction dryer• Large area dehumidifiers for commercial and industrial use• for dehumidification of basements up to 200m2 and in case of water damage• for unattended continuous operation• for operation on a timer"When the desired target humidity is reached, the device completely shuts down. The built-in operating hour counter clearly and quickly shows how long the device has been in use."This construction dryer fits any standard 3/4-inch coupling, e.g. Gardena, etc. available from us or at your local hardware store.   dehumidification performance   Overview of the approximate dehumidification amounts in liters per day at different room temperatures and humidity levels:30°C/80% r.H.: 80 liters (60%: 54 liters) 20°C/80% r.H.: 48 liters (60%: 32 liters)15°C/80% r.H.: 31 liters (60%: 21 liters)10°C/80% r.H.: 26 liters (60%: 19 liters)5°C/80% r.H.: 19 liters (60%: 7 liters)(r.H.=relative humidity)2 year guarantee   Technical data Voltage: 230V / 50HzPower consumption: max. 1350W / 980W (at 20°C/60% r.H.)Sound pressure level: 1 m distance 55 dB (A) (our measurement) / 2.5 m distance 53 dB(A) (manufacturer's specification)Dehumidification capacity: 80 liters/day (30°C / 80% r.H.) Air volume: 550 m³/h (built-in) 780 m³/h (free-blowing)Condensate tank: approx. 15 litersCompressor:Rotary Compressor refrigerant: R407cDimensions (H/W/D): 113 x 67 x 77 cmWeight: 54 kgOperational setting: HygrostatAmbient temperature: 1°C ~ 35°CApplication area: up to 200m² (heated rooms) or 150m² (unheated)Swiss plug: Yes  Hose connection: YesOperating hour counter: YesWarranty: 2 yearsSeries: Fral FDNP96SHEAN Codes: 0745114671578 F96 with bucket CH plug0745114671585 F96 with pump CH plug

Learn more More Fewer

The top dryer for larger spaces. The FDK performs reliable heavy-duty work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round drying of garages, industrial halls, or in water management facilities. You can only get this model from us; comparable products on the market cost twice as much.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK100 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions: 30°C/80% r.H.: 80 liters / 24 h20°C/80% r.H.: 45 liters / 24 h20°C/60% r.H.: 30 liters / 24 h10°C/60% r.H.: 18 Liters / 24 h(r.H.=relative humidity)Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards) Smaller versionThe device is also available in the smaller version "FDK44" -> DetailsComparable devices: Lunor L75     Technical data  Tension 230V / 50Hz Power consumption 1020W (at 20°C/60% r.H.), max. 1550W Sound pressure level 1 m distance 58 dB(A) (our measurement) 2.5 m distance 56 dB(A) (our measurement) dehumidification performance 80 liters/day (30°C / 80% r.H.)  amount of recirculated air 1100 m³/h (installed, free-blowing approx. 1350 m³/h) condensate tank No tank / only hose connection possible Compressor Rotary compressor  refrigerant R410A Dimensions (L x H x D)  73 x 58 x 58 cm Weight 48 Kg cessation of operations Hygrostatrad Ambient temperature 1°C ~ 35°C  Area of application bis 250m²/1000m³ Swiss plug Yes   hose connection Yes guarantee 2 years      

Learn more More Fewer

The top dryer for medium-sized rooms and for rooms with high humidity levels. The FDK provides reliable dehumidification work in both cooler and temperate rooms.The operation is incredibly simple: a rotary knob for adjusting the desired target humidity and that's it. Everything else is done automatically by the device. For example, the FDK can utilize its dehumidifying power for year-round dry storage of single or double garages, archive rooms, basement areas, or also for stabilizing humidity in laundry and drying rooms. You can only get this model from us; comparable products on the market are significantly more expensive.Due to well-developed hot gas defrosting, the dryer is operational down to just above freezing point. Also very noticeable is its good performance in low humidity ranges, where it still extracts water from the air, while other dryers have long stopped producing any drops. Upon reaching the desired target humidity, the device completely shuts off and automatically restarts when the room humidity increases.The humid air is drawn in on one side of the housing and cleaned through an industrial, reusable filter. The dry air is blown into the room from the opposite side, creating an effective circulation in the room. Regarding placement in the room, many locations are conceivable. Both at floor level, somewhere on a free shelf, or mounted to the wall with brackets. When wall-mounted, the dryer can also be installed high up directly under the ceiling.The condensate is drained directly through the hose connection. The FDK44 stands on 4 (removable) rubber feet and has two foldable carrying handles on the top of the housing for easier mobility. When positioned close to the ground, the hose must have a continuous slope towards the drain so that it can drain cleanly and does not back up into the collection tray.The construction is solid and of high quality. The housing is made of white powder-coated metal, and the interior consists of components from the professional league. Therefore, the device is easily suitable for unattended continuous operation. In the event of a power failure, it resumes the dehumidification work with unchanged settings, making it suitable for operation with a timer or a smart home system.The FDK is suitable• as a dehumidifier for warehouses, commercial and industrial spaces, garages, and basements• for wall mounting or directly on the ceiling• for continuous dehumidification of temperate but also cold rooms from 1°C• for unattended continuous operation• for operation on a timer     dehumidification performanceThe dryer can be used over a wide temperature range from +1°C to +35°C thanks to its advanced hot gas defrosting, although, as with all condensation dryers, the dehumidifying power decreases in cooler environments. Examples of dehumidification performance under different (constant) ambient conditions:30°C/80% r.H.: 36 Liters20°C/80% r.H.: 18 Liters20°C/60% r.H.: 14 Liters10°C/60% r.H.: 8 Liters(r.H.=relative humidity) Optional accessoriesThe delivery includes the ready-to-plug-in device, including 4 stand feet for placement, e.g., on a shelf. If needed, we offer various suitable accessories for this dryer, such as:• 2 wall consoles for mounting on a wall (total Fr. 68.-)• Hose coupling• Hose• Condensate pump (if the condensate needs to be pumped upwards)Stronger versionThe device is also available in double strength as "FDK100" -> DetailsComparable devices: Lunor L25     Technical data  Model: Fral Horizon FDK44 Tension: 230V / 50Hz Power consumption:  max. 780W / 530W (at 20°C/60% r.H.) Sound pressure level:  (our measurement) 1 m distance 53 dB(A) 2.5 m distance 51 dB(A) Dehumidification capacity: 36 liters/day (30°C / 80% r.H.)  air circulation volume: 450 m³/h (installed, free-blowing approx. 650 m³) condensate tank: No tank / only hose connection possible Compressor:     Rotary compressor  refrigerant:   R410A (650gr.) Dimensions (L/H/D):      58 x 44 x 36 cm (including feet and carrying handles) Height without feet and carrying handles: 37 cm Weight:    34 Kg Business closure: Hygrostatrad Ambient temperature: 1°C ~ 35°C  Application area: up to 100m² Swiss plug:  Yes   hose connection:  Yes Guarantee: 2 years

Learn more More Fewer

This front is the latest version with enhanced fire and explosion protection.The design of the front has been further developed and significantly improved in connection with the introduction of the new, more environmentally friendly refrigerant R290. However, it is also compatible with all older models using refrigerant R134a since the 2005 model year. The installation takes hardly longer than with the old design and is easy to understand.scope of delivery- Front made of plastic- Fire protection specialist made of plastic- Metal bracket for hygrostat and alarm light with required screws- neutral front sticker with moisture scale- 4 smaller connection cables  Not included in the delivery- alarm light- Hygrostat (Humidity Controller) suitable for all Oasis dehumidifiers with refrigerants R134a and R290, e.g.- Oasis 75 / 125 / 140 / 150 / 165 / 220 / 270- Krüger Airsec 75 / 75TH / 125 / 125TH / 165 / 165TH- Roth-Kippe Sonora 16 / 26 / 36- Lübra OD 125TH / OD 165TH

Learn more More Fewer