The Dryfix "HotAirStopper" and "HotAirStopper XL" are practical accessories for mobile air conditioning units. They simply and reliably seal the window opening required for the passage of the exhaust hose from mobile air conditioning units. This window seal prevents heat from outside on one hand, and the expelled warm air from the air conditioning unit itself from flowing back into the room on the other hand. As a side effect, it keeps mosquitoes and other unwanted insects away. Ultimately, the solution also saves energy: the efficiency of the air conditioning unit is significantly increased because the heat load in the room is reduced.Function principle and assemblyThe Dryfix "HotAirStopper" consists of a roll of hook-and-loop tape that is adhesive on one side, as well as a cloth made of durable special fabric. Incorporated into the cloth is a zipper with two opposing zippers, which allows the exhaust hose to be fixed at the appropriate height from both sides in the window opening. The installation is comparably simple, like attaching a mosquito net: the hook-and-loop strip is glued along the three open sides of the window itself and the window frame. The cloth can then be easily attached with the hook-and-loop. A corresponding installation manual is included in the delivery. By the way, the windows can still be closed even when the cloth is mounted. Ideally, the cloth should not be stretched too tightly over the corners. Calculation window cycleThe standard version fits all common casement or tilt windows, whose three open sides do not exceed a total measurement of 400 cm. Only with us can you also get an XL version for a total measurement of 600 cm (surcharge +CHF 10.-) while supplies last.Calculation of total mass, example tilt window: (2 x window height) + (1 x width)Calculation of total mass, example wing window: (1 x window height) + (2 x width)Advantages and Features• Easy assembly with Velcro tape• Lower room temperature possible• more pleasant sleep without mosquitoes• No ingress of exhaust air and moisture• Window can be opened and closed• Energy-saving and water-repellent• Also suitable for roof windows that can be opened on one side (not for roof windows that rotate around an axis)   questions and answersWhich windows does the system work on?For all common tilt-and-turn windows in old and new buildings, as well as for installable skylights. Ideal are plastic or metal windows. With older, painted wooden windows, some paint may come off when removing the adhesive tape (similar to a mosquito net).  Can I also use the system on my balcony door?Yes. If you open the door as a wing, the standard version is sufficient. If the balcony door is tilted, the XL version fits.Is the cloth machine washable?Yes, up to 40°, e.g. wash program "easy care"   Which air conditioning/extraction devices is the system compatible with?With all devices that have a flexible exhaust hose, also with the mobile split air conditioning units "Ulisse" from our range.

Learn more More Fewer

DRYFIX absorbs water up to 200 times its own volume within minutes and transforms it into a solid gel. This allows work areas to be quickly and efficiently dried out, creating a dam that keeps incoming water at bay. Application examples professional useWater damage drying:The granulate can be spread directly on standing water. It absorbs fully and can then be swept up with a shovel and broom.Flat roof:"By drying out wet flat roof areas with Dryfix, planned work can also be carried out in standing water."Fire department:In the case of water damage of all kinds, a solid dam can be formed in no time by using Dryfix to prevent further spreading of the water.Sanitary:Binds standing water in pipes, toilet bowls, etc.    Simple application The powder is sprinkled in a circle or boundary around the work area directly into the standing water. The water in the work area is completely absorbed, and a dam of gel is formed. Reapply granules as needed. Remove gel with a broom from the work area. "After the work is completed, the gel residues can simply be disposed of in the household waste."    Application examples in the household "Binds spilled liquids such as knocked-over drinks, animal urine, and much more."Interestingly: not only the liquid itself is bound by the gel, but also surrounding smaller particles such as pet hair, shards, etc.   Tip: To reduce the volume during disposal, the fully saturated granulate can be dried in the sun, for example. This significantly reduces the volume again. Instead of powder, a hardened lump forms (similar to sugar that has been stored too moist).    Safety notice• Causes severe eye irritation. • Must not get into the hands of children.• Wear hearing protection. In case of contact with eyes:• Rinse gently with water for a few minutes. • If possible, remove any existing contact lenses.• Continue rinsing. • In case of persistent eye irritation: seek medical advice/consult a doctor. "We ask you to dispose of the granulate and container in the household waste."

Learn more More Fewer

Rack for dehumidifiers and mobile air conditioning units. The rack is ideally suited for:• if a larger bucket is to be placed under a dehumidifier, e.g. during a longer absence on vacation, or • for the increase of mobile air conditioning units with a hose, when the air hose is not long enough to reach a window for venting the warm air.The rack is made of metal pipes (powder-coated white), has a stable stand even when loaded, and sufficient load capacity for dehumidifiers weighing up to 50 kg. The two support plates are bent upwards at the sides, so that the device cannot roll away. The open space in the middle has a width of approximately 17.5 cm and can be used for the passage of a hose. Accordingly, the rack can be used for all devices that have a minimum distance of 17.5 cm between the wheels. 4 plastic buffers protect the floor from damage. For very sensitive floors, we recommend using additional commercially available pads.Fits all mobile air conditioning units from our range except for "PAC 3900 X", "Orion Plus" and "70m3".     Technical data   Height (Top Edge of Carrying Handle): 56 cmHeight of the stand platform: 50 cmWidth outside: 47 cmWidth of the stand platform (=max. device width): 45 cmDepth: 38 cmWeight: 5kg

Learn more More Fewer

The "Royal 20" is part of the latest series of Dryfix dehumidifiers. In addition to its attractive design, the Royal 20 impresses with a large bucket and economical operation. Ideal for keeping damp basements dry and for supporting laundry drying.Thanks to the latest technology, it is highly efficient and economical. The refrigerant R290 has minimal environmental impact. Thus, the "Global Warming Potential (GWP)" is an incredible value of 3, which corresponds to a reduction of 99.85% compared to comparable models from previous generations.service "The operation is controlled at the push of a button via the clear operator panel on the top. The display provides information about set values and the currently measured humidity in the room." Setting target moisture: with each button press, the desired target humidity can be set, which is the value that the device should maintain in the room. If the measured humidity in the room is higher, the operation continues. If the humidity is correct, the device pauses, stopping not only the compressor but also the fan. This is an important point regarding energy consumption and distinguishes the "Royal" from many commercially available products on the market. The desired target humidity can be selected in 5% increments within the range of 30 - 80% relative humidity. To protect a room from mold and odors, a value of about 60% is sufficient, so the ideal setting is 55 or 60%. Lower values do not provide any additional benefit unless one is drying laundry or dealing with water damage. Setting mode: There are three drying options available. a) Continuous operation (for laundry/water damage)b) Room monitoring mode, when the humidity should not exceed a certain valuec) Night mode, in which the ventilation is set to low and the lighting is minimized.  Setting Ventilation: By pressing a button, you can choose between strong and weak ventilation. At the weak fan setting, the operation is very quiet, while at the stronger fan setting, the air volume increases, which is especially advantageous in larger rooms. The "Royal20" draws in the humid room air from the back of the device, where it is cleaned by a removable coarse dust filter. The filter can be easily removed and cleaned under water. It does not need to be replaced. The outlet for the dry air is at the top of the device. An internal counter reminds you after every 600 operating hours (= approx. 1 x per month) that the filter should be cleaned and pauses operation until the proper condition of the filter is confirmed by pressing a button (this confirmation is not possible via WLAN). Timer: "With the timer, the operation can either be limited in time from "now" (1-12 hours) or started at a point in time 1-12 hours in the future, for example when one wants to start the operation on the low tariff." Memory function: "If you want to run the device at the same times every day (for example, during the low tariff), you can do this with a standard timer. The 'Royal20' remembers the last setting and returns with unchanged settings after a power interruption." Key Lock: Prevents unauthorized persons (e.g. children) from playing with the device and changing the settings. Additional Features   3-Color Display: On the front, there is a light that indicates with three colors whether the air is very dry, okay, or too humid. A quick glance at the device is enough to quickly inform oneself about the condition of the air.   Mobile on wheels: The "Royal20" has four wheels, making it easy to move around the room. Additionally, there are two grip recesses on the sides, which allow the dehumidifier to be lifted. "Dryfix Intelligence: The software we developed for particularly economical stop-and-go operation. It avoids frequent restarting of the compressor, thus saving a lot of electricity. The software also checks whether the room temperature is unsuitable for operation, either too cold or too warm, and interrupts operation if necessary.   WIFI controlWIFI control:In addition to the operation on the device itself, all models of the "Royal" series are equipped with WIFI control. The app used for this, "Smart Life," can be downloaded for free for iOS and Android.Minimum requirement:iPhone and iPod: iOS 11.0 or higherApple Watch: watchOS 6.0 or higher Android: newer mobile phone series from the year 2020, Android 5.0 or higher The "Smart Life" is very simple and clear. It has been around for a variety of household appliances for some time and is therefore well developed and tested. To use the app, the dehumidifier only needs to connect to the Wi-Fi in the house. Setting up the app only takes a few minutes. Once set up, you can monitor, regulate, and also query real-time information about the current humidity in the room from anywhere in the world via your phone. This is very convenient while traveling abroad as well as for use in vacation homes.   Advantages and Features  Dehumidification capacity of up to 20 liters per day (at a constant 30°C/80% r.H.), suitable for rooms up to 50m². Color indicator for quick recognition of the room state 12-hour timer for setting operating time Low power consumption - very economical Very quiet operation, the fan has two speed settings. Automatic self-defrosting at low room temperature Auto mode: Shutdown / restart automatically depending on room humidity Electronic Control Antibacterial filter 6.5 L water tank with viewing window and float (automatically interrupts when full), inserted at the back of the device Direct hose connection (suitable hose has an inner diameter of 10mm) WIFI-enabled Automatic shutdown in case of unsuitable cold or too warm temperature memory function   Technical data  Tension  220V-240V / 50Hz Power consumption  250W (at 20°C/60% r.H.), max. 370W/2.2A operating noise 1 m distance 2.5 m distance ?48dB(A) depending on fan speed ?45dB(A) depending on fan speed Min./Max. Room Size  4 / 50 m² dehumidification performance  20 liters/day (30°C / 80% r.H.)  condensate tank  Approx. 6.5 Liters   Compressor   Rotary compressor  refrigerant  R290, 58g Dimensions (H x W x D)  500 x 340 x 240 mm Weight 14 Kg cessation of operations  Digital  Ambient temperature  5°C ~ 35°C  Area of application  Cellar, Hobby room, Apartment, Bedroom Swiss plug Yes   hose connection Yes, suitable hose: 12mm inner diameter GWP (Global Warming Potential) 3 guarantee 2 years Documents / Downloads   User Manual German

Learn more More Fewer

The Dryfix Royal 50 not only impresses with its appealing design but especially with its impressive dehumidification performance and economical operation. It is the ideal solution for keeping damp basements, large rooms, and archives dry, as well as for the quick drying of laundry. Thanks to the latest technology, it operates highly efficiently while consuming very little energy relative to its dehumidification power. Special attention has been paid to environmental friendliness: the refrigerant R290 used has minimal impact on the environment, which is reflected in a Global Warming Potential (GWP) of only 3 – a reduction in environmental impact of 99.85% compared to older models.Operation & OperationThe operation is remarkably simple. The clear control panel on the top of the device allows operation to be controlled at the push of a button, and the display always informs about the set values as well as the currently measured room humidity. The desired target humidity can be set in 5% increments in the range of 30 to 80% relative humidity. An intelligent mechanism ensures that the dehumidifier only runs when the measured humidity is above the set value. Once the target humidity is reached, the device completely pauses, which leads to significant energy savings compared to many other models on the market. The Royal 50 offers various operating modes, including a continuous operation for laundry drying or in case of water damage, a room monitoring mode to maintain a specific humidity level, and a night mode for particularly quiet operation. Additionally, a pure recirculation mode is available, which cleans the air of coarse dust and pollen. The ventilation can be adjusted in two stages as needed, and an integrated timer allows for time-controlled operation. A memory function saves the last settings, and a key lock prevents unintentional changes. The Royal 50 is equipped with wheels, making it easy to move from room to room. The "Dryfix Intelligence" software ensures particularly economical stop-and-go operation and protects the device from unsuitable temperatures. Additionally, the Royal 50 can also be used as a mobile clothes dryer thanks to its high dehumidification performance. Another special feature is the integrated Wi-Fi function, which allows for control of the device via the "Smart Life" app.Further advantagesThe additional advantages and features of the Royal 50 include a dehumidification capacity of up to 50 liters per day, a 24-hour timer, low power consumption, automatic defrosting, an auto mode, electronic control, an antibacterial filter, a 5.1-liter water tank, a hose connection for continuous operation, and an automatic shutdown in unsuitable warm or cold temperatures.   Technical data  Tension  220V-240V / 50Hz Power consumption  685W (at 20°C/60% r.H.), max. 793W / 3.4A Operating noise1 m distance2.5 m distance ?53dB(A) depending on fan speed?50dB(A) depending on fan speed Min./Max. room size  7 / 125 m² dehumidification performance  50 liters/day (30°C / 80% r.H.)  Condensation tank  Approx. 5.1 Liter   Compressor   Rotary compressor  refrigerant  R290, 125g Dimensions (H x W x D)  620 x 368 x 256 mm Weight 18.5 Kg Operational cessation  Digital  Ambient temperature  5°C ~ 35°C  Area of application  large cellars, cellar zones, archives, laundry rooms Swiss plug Yes   hose connection Yes, suitable hose: 10mm inner diameter GWP (Global Warming Potential) 2.9 Guarantee 2 years Documents / Downloads   Operating Instructions German  User manual French  User manual Italian

Learn more More Fewer

The Dryfix mobile is a clever chassis for room air dryers that can be used wherever direct wall mounting is not possible, or where the dryer needs to be moved occasionally. The Dryfix mobile offers extended functions compared to conventional chassis for room air laundry dryers: in the integrated cabinet, items such as detergent, clips, etc. can be stored. In the left area of the cabinet, a 20-liter bucket with a scale is integrated, which automatically interrupts the operation of the dryer when full. This prevents any water from overflowing. A clean pipe routing inside the cabinet further ensures that the condensate is directed precisely into the bucket. The mobile unit is on 4 sturdy wheels and can be easily moved around the floor. The adjustable securing bracket ensures that the device does not tip over.It was developed to match the room air dryer Dryfix Turbo, but designed to be applicable for a variety of dryers. In addition to the Dryfix Turbo, the mobile unit is also suitable for the Dryfix Swiss, the Secomat 75, Secomat 100, Secomat 150, Secomat 20, Bora 208, Bora 210, and other dryers that have a flat base, not higher than 76 cm and not wider than 66 cm (external dimensions of the feet). Of course, the Turbo mobile unit also fits mobile devices that meet the size requirements.The Dryfix mobile can be connected to a standard household socket. The dehumidifier, in turn, is plugged into the socket on the back of the cabinet. When the bucket is full, the dryer turns off. The fill weight is preset on the included bucket (fill volume approx. 19 L) but can be easily increased or decreased as desired using the adjustment screw.The Dryfix mobile is made of metal and is powder-coated white."It was developed by us (Patent CH709716) and is exclusively available from us."    scope of deliveryplug-and-play device including matching 20-liter bucketFurther details-> Dryfix X-Tank Basic, with integrated scale and 20L bucket, for wall-mounted dehumidifiers.-> Dryfix X-Tank Top, with integrated scale and 20L bucket, for mobile dehumidifiers   Technical data Lot:Width of cabinet: 70 cmDepth of cabinet: 50 cmTotal depth incl. stand: 61 cm Stand area dryer interior dimensions: 46.5 x 66.5 cmHeight of the stand surface: 93 cmMax. height including fully extended mounting arm: 1.71 cmMinimum height of mounting arm: 36 cm (=minimum device height)Maximum height of mounting arm: 76 cm (=maximum device height) 4 metal rollers with rubber coating, outer diameter 8 cm, 2 of them with brakeLoad capacity: 60 kgConnection cable: 2m with Swiss plug (220V/standard household socket)

Learn more More Fewer

What can be found in almost every household in the far north is hardly known in our region. The drying cabinet is space-saving and dries clothes, shoes, gloves, etc. quickly and gently. The capacity corresponds to approximately a 16m long clothesline or about 5 kg of laundry.The door hinge on this model is on the left and the handle is accordingly on the right.Gentle dryingUnlike a conventional tumbler, cabinet dryers do not cause wear and tear on textiles. The Ecodryer 2.0 is built on the latest heat pump technology, making it energy-efficient. A stream of warm air is regularly distributed inside the cabinet from the back wall through dozens of exhaust holes, ensuring that the laundry dries evenly. The maximum internal temperature is 55°C, allowing even more delicate garments to be dried.drying processThe drying process itself is quite simple: at the push of a button, you can choose between damp ironing and cupboard dry. The preset recommended values can be changed at any time to personal preferences. When the laundry is dry, the device switches off. The operating noise of the drying cabinet is only 52 dB(A) (comparable to a range hood), making it significantly quieter than room air dryers. It is therefore also suitable for use in apartments and noise-sensitive basement environments. The operating language can be selected according to personal preference. In addition to the Nordic languages, operation is also available in German, French, and English by default.The interior inventory of the cabinet dryer consists of 3 pull-out fork sliders, each with 10 rods, which can be directly hung with laundry or hangers. When longer garments are hung on the hanger, the two lower shelves can simply be folded up, so that half or the entire interior height remains free. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate.The extracted water is drained similarly to a dehumidifier or Secomat. It can either be collected in a simply removable 2-liter bucket or drained directly through a hose connection. This ensures that hardly any moisture enters the room air. An integrated pump also allows for drainage into higher drainage lines up to about 1.2m from the floor. The bucket is equipped with a float that automatically interrupts operation when full.Economical operationThe "Ecodryer" drying cabinets differ from previous models in that they are not based on energy-intensive resistance heating, but on an economical heat pump principle. This reduces operating costs compared to earlier models by 70%. Only the waste heat from the compressor is used to heat the interior of the cabinet. A thermostat monitors the interior temperature. If it rises above 55°C, a second fan is activated, which immediately regulates the interior temperature as needed. With this technology, consumption has been reduced to 0.28 kWh per kg of laundry. A drying process takes approximately 1.5-3 hours, depending on the load and moisture content of the laundry.maintenanceUnder the easily removable floor plate lies the air filter, which must be cleaned regularly. Otherwise, the device is maintenance-free. Also very well thought out is the handling in the unlikely event of a technical problem: the entire technology is inserted under the floor plate as a cassette and can be pulled out for repair work or replacement without having to move or transport the cabinet itself.You can exclusively obtain the Ecodryer 2.0 in Switzerland from us. It is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux.  Technical data  dimensions HxWxD  Bandung door 1925 x 595 x 675 mmThe door is optionally fixed on the left or right. Weight 94 kg Protection class IP24, CE certified capacity 16m drying rodsNormal filling quantity approx. 4-5 kg, max. approx. 8 kg operating noise 52dB(A) power connection Swiss plug, 220 V 10A, max. 900W dehumidification performance up to 1.5 liters per hour, 36 liters per day Power consumption approx. 0.28 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German

Learn more More Fewer

What can be found in almost every household in the far north is hardly known in our region. The drying cabinet is space-saving and dries clothes, shoes, gloves, etc. quickly and gently. The capacity corresponds to approximately a 16m long clothesline or about 5 kg of laundry. The door hinge on this model is on the right and the handle is accordingly on the left.Gentle dryingUnlike a conventional tumbler, cabinet dryers do not cause wear and tear on textiles. The Ecodryer 2.0 is built on the latest heat pump technology, making it energy-efficient. A stream of warm air is regularly distributed inside the cabinet from the back wall through dozens of exhaust holes, ensuring that the laundry dries evenly. The maximum internal temperature is 55°C, allowing even more delicate garments to be dried.drying processThe drying process itself is quite simple: at the push of a button, you can choose between damp ironing and cupboard dry. The preset recommended values can be changed at any time to personal preferences. When the laundry is dry, the device switches off. The operating noise of the drying cabinet is only 52 dB(A) (comparable to a range hood), making it significantly quieter than room air dryers. It is therefore also suitable for use in apartments and noise-sensitive basement environments. The operating language can be selected according to personal preference. In addition to the Nordic languages, operation is also available in German, French, and English by default.The interior inventory of the cabinet dryer consists of 3 pull-out fork sliders, each with 10 rods, which can be directly hung with laundry or hangers. When longer garments are hung on the hanger, the two lower shelves can simply be folded up, so that half or the entire interior height remains free. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate.The extracted water is drained similarly to a dehumidifier or Secomat. It can either be collected in a simply removable 2-liter bucket or drained directly through a hose connection. This ensures that hardly any moisture enters the room air. An integrated pump also allows for drainage into higher drainage lines up to about 1.2m from the floor. The bucket is equipped with a float that automatically interrupts operation when full.Economical operationThe "Ecodryer" drying cabinets differ from previous models in that they are not based on energy-intensive resistance heating, but on an economical heat pump principle. This reduces operating costs compared to earlier models by 70%. Only the waste heat from the compressor is used to heat the interior of the cabinet. A thermostat monitors the interior temperature. If it rises above 55°C, a second fan is activated, which immediately regulates the interior temperature as needed. With this technology, consumption has been reduced to 0.28 kWh per kg of laundry. A drying process takes approximately 1.5-3 hours, depending on the load and moisture content of the laundry.maintenanceUnder the easily removable floor plate lies the air filter, which must be cleaned regularly. Otherwise, the device is maintenance-free. Also very well thought out is the handling in the unlikely event of a technical problem: the entire technology is inserted under the floor plate as a cassette and can be pulled out for repair work or replacement without having to move or transport the cabinet itself.You can exclusively obtain the Ecodryer 2.0 in Switzerland from us. It is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux.  Technical data  dimensions HxWxD  Bandung door 1925 x 595 x 675 mmThe door is optionally fixed on the left or right. Weight 94 kg Protection class IP24, CE certified capacity 16m drying rodsNormal filling quantity approx. 4-5 kg, max. approx. 8 kg operating noise 52dB(A) power connection Swiss plug, 220 V 10A, max. 900W dehumidification performance up to 1.5 liters per hour, 36 liters per day Power consumption approx. 0.28 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German

Learn more More Fewer

The professional, large drying cabinet for intensive use. It is built to a very high standard and is ideal for large drying quantities. For example, for the quick drying of work clothes, firefighting gear, laundry in the gastronomy and hotel sector, but also in private households that appreciate the comfort of faster laundry drying. The capacity is approximately 6 kg of laundry and dries it in about one hour. This corresponds to roughly one washing machine load per hour.Unlike a conventional tumble dryer, cabinet dryers do not cause wear and tear on textiles. The laundry is gently permeated by a stream of air and dries similarly to how it would outside in the garden. The dry air is distributed laterally through several exhaust openings inside the cabinet, ensuring that the laundry dries evenly.The humid air condenses on a cooling element (similar to a dehumidifier or Secomat) and is discharged through a hose. The dehumidification element is located in the upper part of the cabinet, so that the extracted water can be easily directed to a lower drain or a sink. The included hose is 3m long. Due to its high dehumidification power, the FT120VP does not have a condensate tank, unlike the smaller version "Ecodryer 2.0."The drying process takes place autonomously inside the cabinet. A supply of fresh air is not required. This also means that no moisture is released into the room air, which is particularly advantageous in cooler basements (no odor and mold formation due to excessive room humidity).The operation itself is remarkably simple: with the press of a button, you can choose between damp and cupboard dry. The preset, recommended values can be changed at any time to personal preferences. When the laundry is dry, the device turns off. The operating noise is noticeable at 55 dB(A), but in a lockable room, it is not further disturbing. The control panel is available in various languages, including German, French, English, and the Nordic languages.The interior inventory of the wardrobe dryer consists of 4 swing-out forks, each with 5 rods, which can be directly hung with laundry or hangers. Additional items for drying, such as shoes, ski boots, etc., can be placed on the bottom plate. If the wardrobe is used exclusively for drying jackets and coats, the lower three holders can theoretically be cut off, so that only the top holder can be hung with hangers.Newest generation!The drying cabinets differ from earlier models in that they do not rely on conventional resistance heating, but rather on the latest heat pump principle. This reduces operating costs compared to earlier models by 50% or more. Only the waste heat from the compressor is used for the internal temperature regulation of the cabinet. With this technology, consumption has been reduced to 0.35 kWh per kg of laundry. A drying process takes about 1 hour, depending on the load and moisture content of the laundry.Maintenance Drying CabinetAbove the laundry is the air filter, which keeps the air inside the cabinet clean during drying. This filter is inserted and can be easily removed for cleaning. It consists of a frame and a filter mesh with high cleaning efficiency. The filter is reusable.   power connectionThe drying cabinet is delivered as standard without a power cable. It operates on high voltage (400V / 3 phases / 2300W) and should be professionally connected directly by an electrician or equipped with a suitable cable/plug. The Ecodryer is manufactured by the market-leading factory in Scandinavia, which also produces for Miele and Electrolux, among others. It is produced to order and imported, with a delivery time of approximately 4-5 weeks. It is delivered in two parts or on two pallets.At our AIRCENTER in Baden, you can view the cabinet in the exhibition and get advice if you have any questions.  Technical data  Dimensions H x W x D    2059 x 1195 x 658 mm  Weight 189 kg Protection class IPX4, CE certified refrigerant R407C / 925g capacity 18m drying rodsNormal filling quantity approx. 6-8 kg operating noise 55dB(A) power connection 400V 3N AC 50Hz, 10A slow Recording 2300W topping performance approx. 6 kg laundry per hour Power consumption approx. 0.35 kWh per kg of laundry guarantee 3 years Documents / Downloads   User Manual German  User manual English

Learn more More Fewer

Thermostat plug for controlling dehumidifiers, air conditioning units, and heatersThe external hygrostat plug DST interrupts or allows current depending on the room temperature (functioning similarly to a timer, but temperature- not time-dependent). This allows you to automatically turn off dehumidifiers as soon as the room temperature becomes too cold (min. 5°C) or switch to the reverse function at the push of a button to control heating when the room temperature is too low (maximum 3680W).By pressing a button, it can be selected whether the plug allows power when the temperature is higher than the set value (application example: dehumidifier, air conditioning units) or when the temperature is lower than the set value (application example: fan heater, frost guard, etc.).Advantages of the thermostat plug DST:1. Protection against icing of dehumidifiers in unattended operation in cold or highly fluctuating temperature environments2. Temperature regulation of fan heatersFunctioning of the control of dehumidifiers:The thermostat plug DST displays the room temperature. In dehumidification mode, you enter the desired minimum temperature to which your dehumidifier is set. If the current temperature is lower, the power is interrupted and the dehumidifier pauses until the room temperature rises again (lowest selectable value 5°C). Once the minimum temperature is reached, the plug supplies power to the dehumidifier again, allowing it to resume operation.Functioning of the control of heating fans:The Hygrostat Plug DST displays the room temperature. In heating mode, you enter the desired minimum temperature that must not be fallen below in the room (lowest selectable value 5°C). If the current temperature is lower, the plug continues to supply power to the heater until the desired target temperature in the room is reached."Why does the control usually only work with dehumidifiers that have manual control?""Dehumidifiers with electronic control fall into standby mode during a power interruption (except for some industrial devices with memory function) and must be restarted after the power interruption. Therefore, the DST plug is not suitable for these models. In contrast, dehumidifiers with manual/mechanical control (identifiable by a standard rotary switch) resume operation with unchanged settings, as before the power interruption (e.g., via timer or thermostat plug)."Important: Please read the enclosed operating instructions before commissioning, especially so that you can recognize in which mode the plug is located, i.e. whether it is supplying power at a higher or lower temperature than the set value.Shipping costs for 1 item: Fr. 10.- 2 year guarantee Technical data   Voltage: 220V-240V / 50HzPower consumption max: 16 A / 3680 WattDimensions (H/W/D):      11 x 6 x 5.7 (without power poles) cmWeight: 130 gr.Operational shutdown: precise input by key press / digital displaySelectable range: 5-30°CMeasurement accuracy: +/-1°CMessage interval: every 10 secondsAmbient temperature: -10°C ~ 70°C (does not correspond to the selectable setting)Swiss plug: Yes  Warranty: 2 years

Learn more More Fewer

Condensate bucket incl. floatsuitable for dehumidifiers Aerial AD 560 AD 660 AD580 AD680 Mass 372 x 265 x 234 mmCapacity 14 litersMaterial plastic black 

Learn more More Fewer

spare parts Akto521suitable for all device model years Akto521 and WDH-520HB from 2008 to 2022. The bucket also fits the current series WDH-520EB, but the float does not.   Scope of delivery: Replacement bucket with float. "If you only need the float, it can also be ordered here in our shop. The float itself is clicked into the bucket and can be changed very easily."   Technical dataWeight: 0.8kg 

Learn more More Fewer